Commit graph

752,007 commits

Author SHA1 Message Date
NeilBrown
d59578da2b staging: mt7621-dts: add dts files
Add device tree source for mt7621 and gnubee1 to
make testing easier.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
792c11c819 staging: mt7621-eth: mediatek: add Kconfig and Makefile
This patch adds the Makefile and Kconfig required to make the driver build.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
3497a53acd staging: mt7621-eth: add support for mt7621
Add support for SoCs from the mt7621 family. These all have 2 GMAC ports,
both of which are attached to the same internal 1000MBit switch. Currently
we only support GMAC1 as the sole CPU port. MT7621 is very similar to
MT7620 with only a few registers having different offsets. MT7621 is the
first SoC to have the new QDMA engine builtin. The older PDMA engine is
also present. unfortunatley, to get the best performance we need to run RX
on PDMA and TX on QDMA. This SoC is also the first to have TX vlan
offloading and TSO6 support.

NeilBrown: the driver didn't work when I tested, so I changed it
  to match known-working code as much as possible.  This included
  converting to the PDMA engine for TX.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
14befc2d61 staging: mt7621-eth: add mdio support for mt762X family
NeilBrown: this patch originally contained soc-mt7620.c
  but as I cannot test that, I removed it.  Some functions
  from mdio-mt7620.c are needed for soc-mt7621.c support
  - fixed  mt7620_has_carrier() to read correct register.

Original comment:

Add support for SoCs from the mt7620 family. These all have one dedicated
external gbit port and a builtin 5 port 100mbit switch. Additionally one
of the 5 switch ports can be changed to become an additional gbit port
that we can attach a phy to. MT7620 was the first SoC released after
Ralink was acquired by MTK and has seen a lot of changes to the core.

With MT7620 we have seen the addition of some advanced features such as
TX vlan offloading, RX scatter gather and TSO. Newer MTK SoCs are based on
this design.

Although the builtin MT7530 is gbit capable, the builtin PHYs are only
100mbit. There are boards in the wild that use one of the gbit MACs to
attach an external MT7530. For this to work a few hacks need to be applied
to reorganize the MDIO address mappings and autopolling for the SoC to
correctly work with the external switch. This is however not part of the
series and will be part of a later series once we evaluated if we want to
use DSA or switchdev.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
f079b64063 staging: mt7621-eth: add gigabit switch driver (GSW)
The GSW is found in all of the 1000mbit SoCs. it has 5 external ports,
1-2 cpu ports and 1 further port that the internal HW offloading engine
connects to. The switch core used is a MT7530, which also exists as a
standalone chip. Although these SoCs (mt7620/1/3) share the same switch
core, the bring up of these is slightly different. One of the reasons is
that on mt7620 the switch core is mmio mapped while MT7621/3 talks to the
switch via MDIO addr 0x1f. Additionally, the SoCs have different MAC types
and some of them have TRGMII support. MT7621 can do 1,2gbit and MT7623 is
able to do 2,6gbit. The support for the TRGMII bring up is not part of this
series as the code is based on the SDK driver and has between 1500 and 2000
magic values that still need to be converted to defines.

Because of these differences we have 3 separate drivers for these 3 SoCs.
These drivers are very basic and only provides basic init and irq support.

The SoC and switch core both have support for a special tag making DSA
support possible.

NeilBrown:
 - added setting to mt7621_hw_init to match working code from libreCMC
 This needs to be converted to use switchdev.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
e3cbf478f8 staging: mt7621-eth: add the drivers core files
Original comment:

This patch adds the main chunk of the driver. The ethernet core is used in
all of the Mediatek/Ralink Wireless SoCs. Over the years we have seen
various changes to
* the register layout
* the type of ports (single/dual gbit, internal FE/Gbit switch)
* dma engine (PDMA/QDMA)

and new offloading features were added, such as
* checksum
* VLAN TX/RX
* TSO
* LRO

The core functionality has however remained the same allowing us to use
the same code for all SoCs.

The abstraction for the various SoCs uses the typical ops struct pattern
which allows us to extend or override the core functionality depending on
which SoC we are on. The code to bring up the switches and external ports
has also been split into separate files.

There are 2 types of DMA engine, PDMA and the newer QDMA. PDMA uses a
typical ring buffer while QDMA uses a linked list. Unfortunatley we have
the MT7621 which has a few silicon issues. Due to these issues we need to
PDMA for RX and QDMA for TX. All SoCs newer than the MT7621 can can run on
QDMA exclusively.

Most of the SoCs have a switch frontend. Older silicon has a so called ESW
(Ethernet Switch) while newer cores have a GSW (Gigabit switch).
Additionally there is a MDIO bus that can be used to talk to PHYs. In these
cases one switch port get changed into a normal MAC port.

Some SoCs have a dual MAC, we currently only support this on MT7623.

NeilBrown:
 - removed everything not closely related to mt7621, as that is all I
   can test
 - converted ethtool.c to new ethtool_link_ksettings interfaces.
   Doesn't work yet.
 - updated some phydev interface use: e.g. dev_name() -> phydev_name()
 - updated mdio to use mdiobus_get_phy()
 - added some missing export_symbols
 - updated get_stats64 interface
 - TX_DMA_FPORT and TX_DMA_TSO to tx dma descriptor
 - range checked RX_DMA_FPORT in rx dma descriptor
 - tell hardware what mac address was chosen
 - fixed MT7620_GDMA1_FWD_CFG which was using wrong value

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
eb4afe3002 staging: mt7621-eth: Document ralink/mediatek SoC ethernet binding
Add possible dt binding for mediatek gigabit switches.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Michael Lee <igvtee@gmail.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
8b634a9c76 staging: mt7621-mmc: MIPS: ralink: add sdhci for mt7620a SoC
NeilBrown:
  Added range-check on pdev->id before assigning ot
    host->id

  of_dma_configure() sets a default ->dma_mask of
  DMA_BIT_MASK(32), claiming devices can DMA from
  the full 32bit address space.
  The mtk-mmc driver does not support access to
  highmem pages, so it is really limited to the
  bottom 512M (actually 448M due to 64M of IO space).
  Setting ->dma_mask to NULL causes mmc_setup_queue()
  to fall-back to using BLK_BOUNCE_HIGH to tell the
  block layer to use a bounce-buffer for any highmem
  pages requiring IO.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
0853c7a53e staging: mt7621-dma: ralink: add rt2880 dma engine
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
1ab7f2a435 staging: mt7621-spi: add mt7621 support
NeilBrown:
    The code will fail with a warning if asked to transfer
    more than 32 bytes at a time.  So used max_transfer_size
    interface to tell users about this.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
16e556aa10 staging: mt7621-gpio: ralink: add mt7621 gpio controller
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
0317d60de8 staging: mt7621-pinctrl: ralink: add pinctrl driver
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
03f152e31f staging: mt7621-pci: MIPS/ralink: add MT7621 pcie driver
NeilBrown: forward port and hack to work on GNUBEE1

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:01 +01:00
Bart Van Assche
818e0fa293 block: Change a rcu_read_{lock,unlock}_sched() pair into rcu_read_{lock,unlock}()
scsi_device_quiesce() uses synchronize_rcu() to guarantee that the
effect of blk_set_preempt_only() will be visible for percpu_ref_tryget()
calls that occur after the queue unfreeze by using the approach
explained in https://lwn.net/Articles/573497/. The rcu read lock and
unlock calls in blk_queue_enter() form a pair with the synchronize_rcu()
call in scsi_device_quiesce(). Both scsi_device_quiesce() and
blk_queue_enter() must either use regular RCU or RCU-sched.
Since neither the RCU-protected code in blk_queue_enter() nor
blk_queue_usage_counter_release() sleeps, regular RCU protection
is sufficient. Note: scsi_device_quiesce() does not have to be
modified since it already uses synchronize_rcu().

Reported-by: Tejun Heo <tj@kernel.org>
Fixes: 3a0a529971 ("block, scsi: Make SCSI quiesce and resume work reliably")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Martin Steigerwald <martin@lichtvoll.de>
Cc: stable@vger.kernel.org # v4.15
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 12:50:10 -06:00
Sergio Paracuellos
5259b32936 staging: ks7010: replace DPRINTK traces in favour of netdev_*
This commit removes custom defined DPRINTK macro and replaces all the
associated debug and other traces for preferred ones netdev_*.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:49:49 +01:00
Sergio Paracuellos
7acf4002e3 staging: ks7010: remove useless DPRINTK traces
This commit removes some useless traces in some source files

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:49:11 +01:00
Ioana Radulescu
6a9bbe53db staging: fsl-dpaa2/eth: Fix incorrect kfree
Use netdev_alloc_frag() instead of kmalloc to allocate space for
the S/G table of egress multi-buffer frames.

This fixes a bug where an unaligned pointer received from the
allocator would be overwritten with the 64B aligned value,
leading to a wrong address being later passed to kfree.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
bcb4f0d75b staging: pi433: fix CamelCase for dagc enum
Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <normalMode>
  CHECK: Avoid CamelCase: <improve4LowModulationIndex>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
e4928ac29b staging: pi433: fix CamelCase for lnaGain enum
Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <lnaGain>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
9d985d127a staging: pi433: fix CamelCase for DIONumber variable
Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <DIONumber>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
31e045ab54 staging: pi433: fix CamelCase for bitRate variables
Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <bitRate>
  CHECK: Avoid CamelCase: <bitRate_min>
  CHECK: Avoid CamelCase: <bitRate_reg>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
803058902b staging: pi433: fix CamelCase for syncSize variable
Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <syncSize>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
4e3290dbf3 staging: pi433: fix CamelCase for preambleLength variable
Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <preambleLength>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
469b84f3f2 staging: pi433: fix CamelCase for GPIO functions
Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <setup_GPIOs>
  CHECK: Avoid CamelCase: <free_GPIOs>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Palle Christensen
6efb21d6d0 staging:mt29f_spinand: MT29F2G failing as only 16 bits used for addressing.
For NAND flash chips with more than 1Gbit (e.g. MT29F2G) more than 16 bits
are necessary to address the correct page.

Signed-off-by: Palle Christensen <palle.christensen@microsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
HariPrasath Elango
2ebd9ec4ac staging: wilc1000: destroy initialized mutex object
A mutex object that is initialized but not destroyed.This patch destroys
the mutex object

Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:45:31 +01:00
HariPrasath Elango
3ea60ab5fa staging: wilc1000: use kmemdup instead of kmalloc and memcpy
Kmalloc followed by memcpy can be replaced by kmemdup.

Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Reviewed-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:45:31 +01:00
HariPrasath Elango
50413119b6 staging: wilc1000: Destroy mutex object in deinitialization
Destroy the mutex object that is initialized in wlan_init_locks()

Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Reviewed-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:45:31 +01:00
HariPrasath Elango
76c01fdd82 staging: wilc1000: Fix code block alignment
Fix the code alignment for a block of code to adhere to coding
guidelines

Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Reviewed-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:45:31 +01:00
Frank Mori Hess
e1d9fc04c4 staging: comedi: ni_mio_common: ack ai fifo error interrupts.
Ack ai fifo error interrupts in interrupt handler to clear interrupt
after fifo overflow.  It should prevent lock-ups after the ai fifo
overflows.

Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Frank Mori Hess <fmh6jj@gmail.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:43:24 +01:00
Pratik Jain
988f4a3b6a Staging: comedi: drivers: ni_atmio.c: fixed multi-line derefernce issue
Fixed coding style issue.

Signed-off-by: Pratik Jain <pratik.jain0509@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:43:24 +01:00
Rohit Kumar
44f6893672 drivers:staging:android:ashmem: Changing return type from int to loff_t
Changing return type from int to loff_t. Actual return type of the
function (vfs_llseek) is loff_t (long long). Here due to implicit
converion from long long to int, result will be implementation defined.

Signed-off-by: Rohit Kumar <rohit12techie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:43:24 +01:00
Phillip Potter
294fb1d2a2 staging: android: ion: Update wording in drivers/staging/android/ion/Kconfig
Changes the usage of the word 'Chose' to 'Choose' in the ION
Memory Manager Kconfig.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:43:24 +01:00
Rex Zhu
690dc62662 drm/amd/pp: Remove unneeded void * casts for Vega10
Removes unneeded void * casts for the following pointers:
hwmgr->backend
hwmgr->smu_backend

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:38:31 -05:00
Rex Zhu
2538090cb6 drm/amd/pp: Delete get_xclk function in powerplay (v2)
use asic's callback function get_xclk in amdgpu

v2: squash in removal of leftover debug info
(drm/amd/pp: Delete debug info in smu7_hwmgr.c) (Rex)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:38:31 -05:00
Shanker Donthineni
f9f5dc1950 arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening
The function SMCCC_ARCH_WORKAROUND_1 was introduced as part of SMC
V1.1 Calling Convention to mitigate CVE-2017-5715. This patch uses
the standard call SMCCC_ARCH_WORKAROUND_1 for Falkor chips instead
of Silicon provider service ID 0xC2001700.

Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19 18:35:38 +00:00
Rex Zhu
c7d30b40a2 drm/amd/pp: Clean up header file for Vega10
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:35:37 -05:00
Rex Zhu
3f9ca14a1d drm/amd/pp: Move functions to smu backend table for vega10
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:35:30 -05:00
Rex Zhu
9281c1f8a4 drm/amd/pp: Mark bunches of functins in vega10_smumgr.c static
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:35:22 -05:00
Rex Zhu
0b10f20022 drm/amd/pp: Remove dead functions in vega10_smumgr.c
use smc_table_manager function to copy/save tables to/from smu.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:35:15 -05:00
Rex Zhu
699f47951e drm/amdgpu: Delete dead code when early init
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:34:46 -05:00
Suzuki K Poulose
7206dc93a5 arm64: Expose Arm v8.4 features
Expose the new features introduced by Arm v8.4 extensions to
Arm v8-A profile.

These include :

 1) Data indpendent timing of instructions. (DIT, exposed as HWCAP_DIT)
 2) Unaligned atomic instructions and Single-copy atomicity of loads
    and stores. (AT, expose as HWCAP_USCAT)
 3) LDAPR and STLR instructions with immediate offsets (extension to
    LRCPC, exposed as HWCAP_ILRCPC)
 4) Flag manipulation instructions (TS, exposed as HWCAP_FLAGM).

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-19 18:14:27 +00:00
Suzuki K Poulose
847ecd3fa3 arm64: Documentation: cpu-feature-registers: Remove RES0 fields
Remove the invisible RES0 field entries from the table, listing
fields in CPU ID feature registers, as :
 1) We are only interested in the user visible fields.
 2) The field description may not be up-to-date, as the
    field could be assigned a new meaning.
 3) We already explain the rules of the fields which are not
    visible.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-19 18:14:26 +00:00
Ard Biesheuvel
350e1dad0d arm64: asm: drop special versions of adr_l/ldr_l/str_l for modules
Now that we started keeping modules within 4 GB of the core kernel
in all cases, we no longer need to special case the adr_l/ldr_l/str_l
macros for modules to deal with them being loaded farther away.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-19 18:14:26 +00:00
Arnd Bergmann
bd99f9a159 arm64: fix undefined reference to 'printk'
The printk symbol was intended as a generic address that is always
exported, however that turned out to be false with CONFIG_PRINTK=n:

ERROR: "printk" [arch/arm64/kernel/arm64-reloc-test.ko] undefined!

This changes the references to memstart_addr, which should be there
regardless of configuration.

Fixes: a257e02579 ("arm64/kernel: don't ban ADRP to work around Cortex-A53 erratum #843419")
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-19 18:14:25 +00:00
Bjorn Helgaas
6846b3b512 PCI: Report quirks that take more than 10ms
With "initcall_debug", we report how long every PCI quirk took.

Even without "initcall_debug", report the runtime of any quirk that takes
longer than 10ms.  This is to make it easier to notice quirks that slow
down boot.

This was motivated by a report from Paul Menzel that PCI final quirks took
half a second at boot.

Link: https://lkml.kernel.org/r/44cada166e42007d27b4c3e3aa0744d7@molgen.mpg.de
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:08:38 -05:00
Bjorn Helgaas
d89bd9195d PCI: Report quirk timings with pci_info() instead of pr_debug()
With "initcall_debug", we report how long every PCI quirk took.  Previously
we used pr_debug(), which means you have to figure out how to enable debug
output.

Log these timings using pci_info() instead so it doesn't depend on DEBUG,
CONFIG_DYNAMIC_DEBUG, etc.

Also, don't log anything at all unless "initcall_debug" is specified.  This
matches what we do in do_one_initcall_debug().

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:08:38 -05:00
Bjorn Helgaas
f9ea894ca5 PCI/VPD: Move VPD structures to vpd.c
The VPD-related structures are only used in vpd.c, so move them from
drivers/pci/pci.h to vpd.c.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:06:34 -05:00
Bjorn Helgaas
996058573b PCI/VPD: Move VPD quirks to vpd.c
Move the VPD-related quirks from quirks.c to vpd.c, which removes the need
for struct pci_vpd outside vpd.c.  The goal is to encapsulate all the VPD
code and structures in vpd.c.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:06:24 -05:00
Bjorn Helgaas
b1c615c48f PCI/VPD: Move VPD sysfs code to vpd.c
Move the VPD-related sysfs code from pci-sysfs.c to vpd.c.  This follows
the pattern of pcie_aspm_create_sysfs_dev_files().  The goal is to
encapsulate all the VPD code and structures in vpd.c.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:06:17 -05:00