Commit graph

752,007 commits

Author SHA1 Message Date
Jeremy Kerr
889ee9fe47 dt-bindings: fsi: Add specification for FSI busses
This change introduces a proposed layout for describing FSI busses in
the device tree. While the bus is probe-able, we'd still like a method
of describing subordinate (eg i2c) busses that are behind FSI devices.

The FSI core will be responsible for matching probed slaves & engines to
their device tree nodes, so the FSI device drivers' probe() functions
will be passed a struct device with the appropriate of_node populated
where a matching DT node is found.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Acked-by: Eddie James <eajames@linux.vnet.ibm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:00 +01:00
Eddie James
99f039e97b fsi: Fix one and two byte bus reads/writes
Address checker fixed to allow one and two byte reads/writes.
Address alignments for each size verified.

Signed-off-by: Edward James <eajames@us.ibm.com>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:00 +01:00
Jeremy Kerr
b8bd146d38 fsi: master-gpio: Add external mode
This change introduces an 'external mode' for GPIO-based FSI masters,
allowing the clock and data lines to be driven by an external source.
For example, external mode is selected by a user when an external debug
device is attached to the FSI pins.

To do this, we need to set specific states for the trans, mux and enable
GPIOs, and prevent access to clk & data from the FSI core code (by
returning EBUSY).

External mode is controlled by a sysfs attribute, so add the relevant
information to Documentation/ABI/

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:00 +01:00
Jeremy Kerr
29d9b92711 fsi: master-gpio: Add locking during break and link enable
Currently, we perform GPIO accesses in fsi_master_gpio_break and
fsi_master_link_enable, without holding cmd_lock. This change adds the
appropriate locking.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Christopher Bostic <clbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:00 +01:00
Jeremy Kerr
15362d69c4 fsi: Add fsi_master_rescan()
We'll want non-core fsi code to trigger a rescan, so introduce a
non-static fsi_master_rescan() function. Use this for the existing
unscan/scan behaviour too.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Christopher Bostic <clbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:00 +01:00
Darren Hart (VMware)
49368c1321 platform/x86: Fix dell driver init order
Update the initcall ordering to satisfy the following dependency
ordering:

1. DCDBAS, ACPI_WMI
2. DELL_SMBIOS, DELL_RBTN
3. DELL_LAPTOP, DELL_WMI

By assigning them to the following initcall levels:

subsys_initcall: DCDBAS, ACPI_WMI
module_init: DELL_SMBIOS, DELL_RBTN
late_initcall: DELL_LAPTOP, DELL_WMI

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-14 11:05:53 -07:00
Darren Hart
75073a64a9 platform/x86: dell-smbios: Resolve dependency error on ACPI_WMI
Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled,
DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to
prevent a configuration where DELL_SMBIOS=y and either backend
dependency =m. Update the comment accordingly.

Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-14 11:05:43 -07:00
Cathy Zhou
cf55612a94 sunvnet: does not support GSO for sctp
The NETIF_F_GSO_SOFTWARE implies support for GSO on SCTP, but the
sunvnet driver does not support GSO for sctp.  Here we remove the
NETIF_F_GSO_SOFTWARE feature flag and only report NETIF_F_ALL_TSO
instead.

Signed-off-by: Cathy Zhou <Cathy.Zhou@Oracle.COM>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 14:01:33 -04:00
David S. Miller
4ea41f829a linux-can-fixes-for-4.16-20180314
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEENrCndlB/VnAEWuH5k9IU1zQoZfEFAlqpD0ETHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCT0hTXNChl8RLvB/9Sb3oVKHNeSSDTN/oR3fOrlVd2rj58
 Aajmtwkfc4uXuV/1l/Muu/zsP4DED7WrO0r777C3rX+0jsZtHALZbtS/0ksbUvJM
 mJQ//xC4cfQJ1djNtPz9QmNMbHH4zchKY3xTGTiQeEZddnFYGPgB3OCo0j9R4AGd
 a46n1svV8Zzao8NJ4Hc/2AQwyn1EafUKqoR5u9hH/pZ9oCZH/EDH9qaTaMuoRWMq
 BgoS14yDG9mOfdbUA2Ywd7nZ4KiHM6Or1b+S/1W8Unfnfl3bIfVPsJQi2Ypn1zpf
 hXKYz68AfP7B0uNZGxVjjTliF8M4CAdv/9pAW7Pwx68Pu2TvaknROFxe
 =o8zS
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-4.16-20180314' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2018-03-14

this is a pull request of two patches for net/master.

Both patches are by Andri Yngvason and fix problems in the cc770 driver,
that show up quite fast on RT systems, but also on non RT setups.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:50:47 -04:00
David S. Miller
c292566a77 Merge branch 'sctp-add-support-for-some-sctp-auth-APIs-from-RFC6458'
Xin Long says:

====================
sctp: add support for some sctp auth APIs from RFC6458

This patchset mainly adds support for SCTP AUTH Information for sendmsg,
described in RFC6458:

    5.3.8.  SCTP AUTH Information Structure (SCTP_AUTHINFO)

and also adds a sockopt described in RFC6458:

    8.3.4.  Deactivate a Shared Key (SCTP_AUTH_DEACTIVATE_KEY)

and two types of events for AUTHENTICATION_EVENT described in RFC6458:

    6.1.8.  SCTP_AUTHENTICATION_EVENT:
             - SCTP_AUTH_NO_AUTH
             - SCTP_AUTH_FREE_KEY

After this patchset, we have fully support for sctp_sendv in kernel.

Note that this patchset won't touch that sctp options merge conflict.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:48:28 -04:00
Xin Long
30f6ebf65b sctp: add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT
This patch is to add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT,
as described in section 6.1.8 of RFC6458.

      SCTP_AUTH_NO_AUTH:  This report indicates that the peer does not
         support SCTP authentication as defined in [RFC4895].

Note that the implementation is quite similar as that of
SCTP_ADAPTATION_INDICATION.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:48:27 -04:00
Xin Long
ec2e506c68 sctp: add SCTP_AUTH_FREE_KEY type for AUTHENTICATION_EVENT
This patch is to add SCTP_AUTH_FREE_KEY type for AUTHENTICATION_EVENT,
as described in section 6.1.8 of RFC6458.

      SCTP_AUTH_FREE_KEY:  This report indicates that the SCTP
         implementation will no longer use the key identifier specified
         in auth_keynumber.

After deactivating a key, it would never be used again, which means
it's refcnt can't be held/increased by new chunks. But there may be
some chunks in out queue still using it. So only when refcnt is 1,
which means no chunk in outqueue is using/holding this key either,
this EVENT would be sent.

When users receive this notification, they could do DEL_KEY sockopt to
remove this shkey, and also tell the peer that this key won't be used
in any chunk thoroughly from now on, then the peer can remove it as
well safely.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:48:27 -04:00
Xin Long
601590ec15 sctp: add sockopt SCTP_AUTH_DEACTIVATE_KEY
This patch is to add sockopt SCTP_AUTH_DEACTIVATE_KEY, as described in
section 8.3.4 of RFC6458.

This set option indicates that the application will no longer send user
messages using the indicated key identifier.

Note that RFC requires that only deactivated keys that are no longer used
by an association can be deleted, but for the backward compatibility, it
is not to check deactivated when deleting or replacing one sh_key.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:48:27 -04:00
Xin Long
3ff547c06a sctp: add support for SCTP AUTH Information for sendmsg
This patch is to add support for SCTP AUTH Information for sendmsg,
as described in section 5.3.8 of RFC6458.

With this option, you can provide shared key identifier used for
sending the user message.

It's also a necessary send info for sctp_sendv.

Note that it reuses sinfo->sinfo_tsn to indicate if this option is
set and sinfo->sinfo_ssn to save the shkey ID which can be 0.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:48:27 -04:00
Xin Long
1b1e0bc994 sctp: add refcnt support for sh_key
With refcnt support for sh_key, chunks auth sh_keys can be decided
before enqueuing it. Changing the active key later will not affect
the chunks already enqueued.

Furthermore, this is necessary when adding the support for authinfo
for sendmsg in next patch.

Note that struct sctp_chunk can't be grown due to that performance
drop issue on slow cpu, so it just reuses head_skb memory for shkey
in sctp_chunk.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:48:27 -04:00
Darren Hart (VMware)
7129707ec2 platform/x86: Fix dell driver init order
Update the initcall ordering to satisfy the following dependency
ordering:

1. DCDBAS, ACPI_WMI
2. DELL_SMBIOS, DELL_RBTN
3. DELL_LAPTOP, DELL_WMI

By assigning them to the following initcall levels:

subsys_initcall: DCDBAS, ACPI_WMI
module_init: DELL_SMBIOS, DELL_RBTN
late_initcall: DELL_LAPTOP, DELL_WMI

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-14 10:48:06 -07:00
Jonathan Toppins
ea91df6d8a tg3: prevent scheduling while atomic splat
The problem was introduced in commit
506b0a395f ("[netdrv] tg3: APE heartbeat changes"). The bug occurs
because tp->lock spinlock is held which is obtained in tg3_start
by way of tg3_full_lock(), line 11571. The documentation for usleep_range()
specifically states it cannot be used inside a spinlock.

Fixes: 506b0a395f ("[netdrv] tg3: APE heartbeat changes")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:43:02 -04:00
David S. Miller
c469012729 Merge branch 'smc-fixes'
Ursula Braun says:

====================
net/smc: fixes 2018-03-14

here are smc changes for the net-next tree.
The first patch enables SMC to work with mlx5-RoCE-devices.
Patches 2 and 3 deal with link group freeing.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:40:44 -04:00
Karsten Graul
97cdbc4213 net/smc: schedule free_work when link group is terminated
The free_work worker must be scheduled when the link group is
abnormally terminated.

Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:40:44 -04:00
Ursula Braun
268ffcc4eb net/smc: free link group without pending free_work only
Make sure there is no pending or running free_work worker for the link
group when freeing the link group.

Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:40:44 -04:00
Ursula Braun
c9f4c6cf53 net/smc: pay attention to MAX_ORDER for CQ entries
smc allocates a certain number of CQ entries for used RoCE devices. For
mlx5 devices the chosen constant number results in a large allocation
causing this warning:

[13355.124656] WARNING: CPU: 3 PID: 16535 at mm/page_alloc.c:3883 __alloc_pages_nodemask+0x2be/0x10c0
[13355.124657] Modules linked in: smc_diag(O) smc(O) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ip6table_filter ip6_tables iptable_filter mlx5_ib ib_core sunrpc mlx5_core s390_trng rng_core ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha256_s390 sha1_s390 sha_common ptp pps_core eadm_sch dm_multipath dm_mod vhost_net tun vhost tap sch_fq_codel kvm ip_tables x_tables autofs4 [last unloaded: smc]
[13355.124672] CPU: 3 PID: 16535 Comm: kworker/3:0 Tainted: G           O    4.14.0uschi #1
[13355.124673] Hardware name: IBM 3906 M04 704 (LPAR)
[13355.124675] Workqueue: events smc_listen_work [smc]
[13355.124677] task: 00000000e2f22100 task.stack: 0000000084720000
[13355.124678] Krnl PSW : 0704c00180000000 000000000029da76 (__alloc_pages_nodemask+0x2be/0x10c0)
[13355.124681]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
[13355.124682] Krnl GPRS: 0000000000000000 00550e00014080c0 0000000000000000 0000000000000001
[13355.124684]            000000000029d8b6 00000000f3bfd710 0000000000000000 00000000014080c0
[13355.124685]            0000000000000009 00000000ec277a00 0000000000200000 0000000000000000
[13355.124686]            0000000000000000 00000000000001ff 000000000029d8b6 0000000084723720
[13355.124708] Krnl Code: 000000000029da6a: a7110200		tmll	%r1,512
                          000000000029da6e: a774ff29		brc	7,29d8c0
                         #000000000029da72: a7f40001		brc	15,29da74
                         >000000000029da76: a7f4ff25		brc	15,29d8c0
                          000000000029da7a: a7380000		lhi	%r3,0
                          000000000029da7e: a7f4fef1		brc	15,29d860
                          000000000029da82: 5820f0c4		l	%r2,196(%r15)
                          000000000029da86: a53e0048		llilh	%r3,72
[13355.124720] Call Trace:
[13355.124722] ([<000000000029d8b6>] __alloc_pages_nodemask+0xfe/0x10c0)
[13355.124724]  [<000000000013bd1e>] s390_dma_alloc+0x6e/0x148
[13355.124733]  [<000003ff802eeba6>] mlx5_dma_zalloc_coherent_node+0x8e/0xe0 [mlx5_core]
[13355.124740]  [<000003ff802eee18>] mlx5_buf_alloc_node+0x70/0x108 [mlx5_core]
[13355.124744]  [<000003ff804eb410>] mlx5_ib_create_cq+0x558/0x898 [mlx5_ib]
[13355.124749]  [<000003ff80407d40>] ib_create_cq+0x48/0x88 [ib_core]
[13355.124751]  [<000003ff80109fba>] smc_ib_setup_per_ibdev+0x52/0x118 [smc]
[13355.124753]  [<000003ff8010bcb6>] smc_conn_create+0x65e/0x728 [smc]
[13355.124755]  [<000003ff801081a2>] smc_listen_work+0x2d2/0x540 [smc]
[13355.124756]  [<0000000000162c66>] process_one_work+0x1be/0x440
[13355.124758]  [<0000000000162f40>] worker_thread+0x58/0x458
[13355.124759]  [<0000000000169e7e>] kthread+0x14e/0x168
[13355.124760]  [<00000000009ce8be>] kernel_thread_starter+0x6/0xc
[13355.124762]  [<00000000009ce8b8>] kernel_thread_starter+0x0/0xc
[13355.124762] Last Breaking-Event-Address:
[13355.124764]  [<000000000029da72>] __alloc_pages_nodemask+0x2ba/0x10c0
[13355.124764] ---[ end trace 34be38b581c0b585 ]---

This patch reduces the smc constant for the maximum number of allocated
completion queue entries SMC_MAX_CQE by 2 to avoid high round up values
in the mlx5 code, and reduces the number of allocated completion queue
entries even more, if the final allocation for an mlx5 device hits the
MAX_ORDER limit.

Reported-by: Ihnken Menssen <menssen@de.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:40:44 -04:00
Sabrina Dubroca
d52e5a7e7c ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu
Prior to the rework of PMTU information storage in commit
2c8cec5c10 ("ipv4: Cache learned PMTU information in inetpeer."),
when a PMTU event advertising a PMTU smaller than
net.ipv4.route.min_pmtu was received, we would disable setting the DF
flag on packets by locking the MTU metric, and set the PMTU to
net.ipv4.route.min_pmtu.

Since then, we don't disable DF, and set PMTU to
net.ipv4.route.min_pmtu, so the intermediate router that has this link
with a small MTU will have to drop the packets.

This patch reestablishes pre-2.6.39 behavior by splitting
rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu.
rt_mtu_locked indicates that we shouldn't set the DF bit on that path,
and is checked in ip_dont_fragment().

One possible workaround is to set net.ipv4.route.min_pmtu to a value low
enough to accommodate the lowest MTU encountered.

Fixes: 2c8cec5c10 ("ipv4: Cache learned PMTU information in inetpeer.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:37:36 -04:00
Veerasenareddy Burru
5677629a5a liquidio: Add support for liquidio 10GBase-T NIC
Added ethtool changes to show port type as TP (Twisted Pair) for
10GBASE-T ports. Same driver and firmware works for liquidio NIC with
SFP+ ports or TP ports.

Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:34:42 -04:00
Jason Wang
59655a5b6c tuntap: XDP_TX can use native XDP
Now we have ndo_xdp_xmit, switch to use it instead of the slow generic
XDP TX routine. XDP_TX on TAP gets ~20% improvements from ~1.5Mpps to
~1.8Mpps on 2.60GHz Core(TM) i7-5600U.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:20:48 -04:00
David S. Miller
16c2e4db83 Merge branch 'DPAA-Ethernet-fixes'
Madalin Bucur says:

====================
DPAA Ethernet fixes

This patch set is addressing several issues in the DPAA Ethernet
driver suite:

 - module unload crash caused by wrong reference to device being left
   in the cleanup code after the DSA related changes
 - scheduling wile atomic bug in QMan code revealed during dpaa_eth
   module unload
 - a couple of error counter fixes, a duplicated init in dpaa_eth.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:16:23 -04:00
Camelia Groza
82d141cd19 dpaa_eth: remove duplicate increment of the tx_errors counter
The tx_errors counter is incremented by the dpaa_xmit caller.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:16:23 -04:00
Camelia Groza
e4d1b37c17 dpaa_eth: increment the RX dropped counter when needed
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:16:23 -04:00
Camelia Groza
565186362b dpaa_eth: remove duplicate initialization
The fd_format has already been initialized at this point.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:16:23 -04:00
Madalin Bucur
88075256ee dpaa_eth: fix error in dpaa_remove()
The recent changes that make the driver probing compatible with DSA
were not propagated in the dpa_remove() function, breaking the
module unload function. Using the proper device to address the issue.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:16:23 -04:00
Madalin Bucur
96f413f476 soc/fsl/qbman: fix issue in qman_delete_cgr_safe()
The wait_for_completion() call in qman_delete_cgr_safe()
was triggering a scheduling while atomic bug, replacing the
kthread with a smp_call_function_single() call to fix it.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:16:23 -04:00
Jeffy Chen
83fc580dcc Input: gpio-keys - add support for wakeup event action
Add support for specifying event actions to trigger wakeup when using
the gpio-keys input device as a wakeup source.

This would allow the device to configure when to wakeup the system. For
example a gpio-keys input device for pen insert, may only want to wakeup
the system when ejecting the pen.

Suggested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-14 10:13:22 -07:00
Gustavo A. R. Silva
7085123333 Input: appletouch - use true and false for boolean values
Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-14 10:13:08 -07:00
David S. Miller
815df9ac6c Merge branch 'sfc-support-FEC-configuration'
Edward Cree says:

====================
sfc: support FEC configuration

Implements the ethtool get & set fecparam operations.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:12:15 -04:00
Edward Cree
7f61e6c627 sfc: support FEC configuration through ethtool
As well as 'auto' and the forced 'off', 'rs' and 'baser' states, we also
 handle combinations of settings (since the fecparam->fec field is a
 bitmask), where auto|rs and auto|baser specify a preferred FEC mode but
 will fall back to the other if the cable or link partner doesn't support
 it.  rs|baser (with or without auto bit) means prefer FEC even where
 auto wouldn't use it, but let FW choose which encoding to use.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:12:15 -04:00
Edward Cree
f215347cc0 sfc: update MCDI protocol headers
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:12:14 -04:00
John Allen
e676d81c89 ibmvnic: Fix reset return from closed state
The case in which we handle a reset from the state where the device is
closed seems to be bugged for all types of reset. For most types of reset
we currently exit the reset routine correctly, but don't set the state to
indicate that we are back in the "closed" state. For some specific cases,
we don't exit the reset routine at all and resetting will cause a closed
device to be opened.

This patch fixes the problem by unconditionally checking the reset_state
and correctly setting the adapter state before returning.

Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14 13:08:14 -04:00
Linus Torvalds
3032f8c504 USB fixes for 4.16-rc6
Here are a small clump of USB fixes for 4.16-rc6.
 
 Nothing major, just a number of fixes in lots of different drivers, as
 well as a PHY driver fix that snuck into this tree.  Full details are in
 the shortlog.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWqkFYA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynWYQCfRxixarpDUKd0rxqdSp/v1UFxP4AAoNFIpNrl
 CpSr9aiz/V/4eLk1z7Iu
 =j+5S
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a small clump of USB fixes for 4.16-rc6.

  Nothing major, just a number of fixes in lots of different drivers, as
  well as a PHY driver fix that snuck into this tree. Full details are
  in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  usb: musb: Fix external abort in musb_remove on omap2430
  phy: qcom-ufs: add MODULE_LICENSE tag
  usb: typec: tcpm: fusb302: Do not log an error on -EPROBE_DEFER
  USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
  usbip: vudc: fix null pointer dereference on udc->lock
  xhci: Fix front USB ports on ASUS PRIME B350M-A
  usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
  usb: usbmon: Read text within supplied buffer size
  usb: host: xhci-rcar: add support for r8a77965
  USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h
  usb: xhci: dbc: Fix lockdep warning
  xhci: fix endpoint context tracer output
  Revert "typec: tcpm: Only request matching pdos"
  usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
  usb: quirks: add control message delay for 1b1c:1b20
  uas: fix comparison for error code
  usb: gadget: udc: renesas_usb3: add binging for r8a77965
  usb: renesas_usbhs: add binding for r8a77965
  usb: dwc2: fix STM32F7 USB OTG HS compatible
  dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding
  ...
2018-03-14 10:05:59 -07:00
Bo Yan
57adbeea64 coresight: etm4x: Fix bit shifting
ctxid_pid and vmid_val in config are of type u64. When an integer
0xFF is being left shifted more than 32 bits, the behavior is
undefined. The fix is to specify 0xFF as an unsigned long.

Detected by Coverity scan: CID 37650, 37651 (Bad bit shift operation)

Signed-off-by: Bo Yan <byan@nvidia.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 18:05:34 +01:00
Leo Yan
831c326fcd coresight: Use %px to print pcsr instead of %p
Commit ad67b74d24 ("printk: hash addresses printed with %p") lets
printk specifier %p to hash all addresses before printing, this was
resulting in the high 32 bits of pcsr can only output zeros.  So
module cannot completely print pc value and it's pointless for debugging
purpose.

This patch fixes this by using %px to print pcsr instead.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 18:05:34 +01:00
Linus Torvalds
6560ca4a0f TTY/Serial driver fixes for 4.16-rc6
Here are some small TTY core and Serial driver fixes for 4.16-rc6.
 
 They resolve some newly reported bugs, as well as some very old ones,
 which is always nice to see.  There is also a new device id added in
 here for good measure.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWqkGNQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylaUACeM81F4/D+thYZfi4qUmvko/oNbO8Ani/4Wl1z
 e/dh+L3FWjQBdxLzGLEC
 =m2pj
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty core and serial driver fixes for 4.16-rc6.

  They resolve some newly reported bugs, as well as some very old ones,
  which is always nice to see. There is also a new device id added in
  here for good measure.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: imx: fix bogus dev_err
  serial: sh-sci: prevent lockup on full TTY buffers
  serial: 8250_pci: Add Brainboxes UC-260 4 port serial device
  earlycon: add reg-offset to physical address before mapping
  serial: core: mark port as initialized in autoconfig
  serial: 8250_pci: Don't fail on multiport card class
  tty/serial: atmel: add new version check for usart
  tty: make n_tty_read() always abort if hangup is in progress
2018-03-14 10:02:40 -07:00
Linus Torvalds
5e15d39f1e Staging fixes for 4.16-rc6
Here are 3 staging driver fixes for 4.16-rc6
 
 Two of them are lockdep fixes for the ashmem driver that have been
 reported by a number of people recently.  The last one is a fix for the
 comedi driver core.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWqkHLA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yke8QCgu2O8UVv/6vfXr9LFoLibALbHVI0An1HMLGiw
 KcRNTYaF0cBGBCrnPPa+
 =h5d2
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging fixes from Greg KH:
 "Here are three staging driver fixes for 4.16-rc6

  Two of them are lockdep fixes for the ashmem driver that have been
  reported by a number of people recently. The last one is a fix for the
  comedi driver core.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ashmem: Fix possible deadlock in ashmem_ioctl
  staging: comedi: fix comedi_nsamples_left.
  staging: android: ashmem: Fix lockdep issue during llseek
2018-03-14 09:59:45 -07:00
Mike Frysinger
65d9982d7e vt: change SGR 21 to follow the standards
ECMA-48 [1] (aka ISO 6429) has defined SGR 21 as "doubly underlined"
since at least March 1984.  The Linux kernel has treated it as SGR 22
"normal intensity" since it was added in Linux-0.96b in June 1992.
Before that, it was simply ignored.  Other terminal emulators have
either ignored it, or treat it as double underline now.  xterm for
example added support in its 304 release (May 2014) [2] where it was
previously ignoring it.

Changing this behavior shouldn't be an issue:
- It isn't a named capability in ncurses's terminfo database, so no
  script is using libtinfo/libcurses to look this up, or using tput
  to query & output the right sequence.
- Any script assuming SGR 21 will reset intensity in all terminals
  already do not work correctly on non-Linux VTs (including running
  under screen/tmux/etc...).
- If someone has written a script that only runs in the Linux VT, and
  they're using SGR 21 (instead of SGR 22), the output should still
  be readable.

imo it's important to change this as the Linux VT's non-conformance
is sometimes used as an argument for other terminal emulators to not
implement SGR 21 at all, or do so incorrectly.

[1]: https://www.ecma-international.org/publications/standards/Ecma-048.htm
[2]: 2fd29cb98d

Signed-off-by: Mike Frysinger <vapier@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 17:58:44 +01:00
Maruyama Shohei
3993a16309 Input: silead - add Chuwi Hi8 support
This commit add ACPI support for Chuwi Hi8 tablet. On the ACPI table of
the tablet, GSL1680 is registered as MSSL0001, so the driver does not
recognize the device. This commit resolve it.

Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-14 09:56:31 -07:00
Andy Shevchenko
fecae16e69 parport: Replace short License header by SPDX identifier
No functional changes involved.

Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 17:54:10 +01:00
Andy Shevchenko
4af5781ad1 parport: Sort headers alphabetically
While here, remove init.h inclusion since we are not using it directly and
module.h will do this for us.

No functional changes intended.

Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 17:54:09 +01:00
Andy Shevchenko
b0b0a6438e parport: Switch to use module_pci_driver() macro
Eliminate some boilerplate code by using module_pci_driver() instead of
init/exit, moving the salient bits from init into probe.

Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 17:54:09 +01:00
Andy Shevchenko
82dfabf1c4 parport: Convert printk(KERN_WARN) to dev_warn()
dev_warn() will print device name with associated driver,
no need to keep this open coded.

While here, adjust indentation in the rest of dev_dbg() calls.

Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 17:54:09 +01:00
Andy Shevchenko
96edf5376e parport: Don't shadow error codes in ->probe()
When ->probe() calls helper functions return theirs error codes
instead of shadowing them.

Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 17:54:09 +01:00
Andy Shevchenko
ad8ce834bf parport: Convert to use managed functions pcim_* and devm_*
This makes the error handling much more simpler than open-coding everything
and in addition makes the probe function smaller an tidier.

Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 17:54:09 +01:00
Andy Shevchenko
1089c91111 parport: PCI core handles power state for us
There is no need to repeat the work that is already done in the PCI
driver core. The patch removes excerpts from suspend and resume
callbacks.

Note that there is no more calls performed to enable or disable a PCI
device during suspend-resume cycle. Nowadays they seems to be
superflous. Someone can read more in [1].

While here, convert calls to new driver API.

[1] https://www.kernel.org/doc/ols/2009/ols2009-pages-319-330.pdf

Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 17:54:09 +01:00