commit 73721d8676 upstream.
Enhance the bpf_arch_text_poke() function to enable accurate location
of BPF program entry points.
When modifying the entry point of a BPF program, skip the "move t0, ra"
instruction to ensure the correct logic and copy of the jump address.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58075aec92 upstream.
Add RAPL support for Intel Nova Lake and Nova Lake L processors using
the core defaults configuration.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject and changelog edits, rebase ]
Link: https://patch.msgid.link/20251028101814.3482508-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39f421f2e3 upstream.
Add Wildcat Lake to the list of supported processors for RAPL.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251023174532.1882008-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2b8d20628 upstream.
For zoned block devices that do not need zone write plugs (e.g. most
device mapper devices that support zones), the disk hash table of zone
write plugs is NULL. For such devices, blk_zone_reset_all_bio_endio()
should not attempt to scan this has table as that causes a NULL pointer
dereference.
Fix this by checking that the disk does have zone write plugs using the
atomic counter. This is equivalent to checking for a non-NULL hash table
but has the advantage to also speed up the execution of
blk_zone_reset_all_bio_endio() for devices that do use zone write plugs
but do not have any plug in the hash table (e.g. a disk with only full
zones).
Fixes: efae226c2e ("block: handle zone management operations completions")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4012d78562 upstream.
erofs readahead could fail with ENOMEM under the memory pressure because
it tries to alloc_page with GFP_NOWAIT | GFP_NORETRY, while GFP_KERNEL
for a regular read. And if readahead fails (with non-uptodate folios),
the original request will then fall back to synchronous read, and
`.read_folio()` should return appropriate errnos.
However, in scenarios where readahead and read operations compete,
read operation could return an unintended EIO because of an incorrect
error propagation.
To resolve this, this patch modifies the behavior so that, when the
PCL is for read(which means pcl.besteffort is true), it attempts actual
decompression instead of propagating the privios error except initial EIO.
- Page size: 4K
- The original size of FileA: 16K
- Compress-ratio per PCL: 50% (Uncompressed 8K -> Compressed 4K)
[page0, page1] [page2, page3]
[PCL0]---------[PCL1]
- functions declaration:
. pread(fd, buf, count, offset)
. readahead(fd, offset, count)
- Thread A tries to read the last 4K
- Thread B tries to do readahead 8K from 4K
- RA, besteffort == false
- R, besteffort == true
<process A> <process B>
pread(FileA, buf, 4K, 12K)
do readahead(page3) // failed with ENOMEM
wait_lock(page3)
if (!uptodate(page3))
goto do_read
readahead(FileA, 4K, 8K)
// Here create PCL-chain like below:
// [null, page1] [page2, null]
// [PCL0:RA]-----[PCL1:RA]
...
do read(page3) // found [PCL1:RA] and add page3 into it,
// and then, change PCL1 from RA to R
...
// Now, PCL-chain is as below:
// [null, page1] [page2, page3]
// [PCL0:RA]-----[PCL1:R]
// try to decompress PCL-chain...
z_erofs_decompress_queue
err = 0;
// failed with ENOMEM, so page 1
// only for RA will not be uptodated.
// it's okay.
err = decompress([PCL0:RA], err)
// However, ENOMEM propagated to next
// PCL, even though PCL is not only
// for RA but also for R. As a result,
// it just failed with ENOMEM without
// trying any decompression, so page2
// and page3 will not be uptodated.
** BUG HERE ** --> err = decompress([PCL1:R], err)
return err as ENOMEM
...
wait_lock(page3)
if (!uptodate(page3))
return EIO <-- Return an unexpected EIO!
...
Fixes: 2349d2fa02 ("erofs: sunset unneeded NOFAILs")
Cc: stable@vger.kernel.org
Reviewed-by: Jaewook Kim <jw5454.kim@samsung.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Junbeom Yeom <junbeom.yeom@samsung.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b991ad8dc upstream.
These objects are meant to be used by the GPU firmware or by the PM unit
within the GPU, in which case they may contain physical addresses.
This adds a layer of protection against exposing potentially exploitable
information outside of the driver.
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251208-no-export-pm-fw-obj-v1-1-83ab12c61693@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 560271e10b upstream.
Since we recently started warning about uses of this function after the
atomic check phase completes, we've started getting warnings about this in
nouveau. It appears a misplaced drm_atomic_get_crtc_state() call has been
hiding in our .prepare_fb callback for a while.
So, fix this by adding a new nv50_head_atom_get_new() function and use that
in our .prepare_fb callback instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251211190256.396742-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 754c232384 upstream.
In situations where no system memory is migrated to devmem, and in
upcoming patches where another GPU is performing the migration to
the newly allocated devmem buffer, there is nothing to ensure any
ongoing clear to the devmem allocation or async eviction from the
devmem allocation is complete.
Address that by passing a struct dma_fence down to the copy
functions, and ensure it is waited for before migration is marked
complete.
v3:
- New patch.
v4:
- Update the logic used for determining when to wait for the
pre_migrate_fence.
- Update the logic used for determining when to warn for the
pre_migrate_fence since the scheduler fences apparently
can signal out-of-order.
v5:
- Fix a UAF (CI)
- Remove references to source P2P migration (Himal)
- Put the pre_migrate_fence after migration.
v6:
- Pipeline the pre_migrate_fence dependency (Matt Brost)
Fixes: c5b3eb5a90 ("drm/xe: Add GPUSVM device memory copy vfunc functions")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 16b5ad3195)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fe2bd1954 upstream.
Initialize the eb.vma array with values of 0 when the eb structure is
first set up. In particular, this sets the eb->vma[i].vma pointers to
NULL, simplifying cleanup and getting rid of the bug described below.
During the execution of eb_lookup_vmas(), the eb->vma array is
successively filled up with struct eb_vma objects. This process includes
calling eb_add_vma(), which might fail; however, even in the event of
failure, eb->vma[i].vma is set for the currently processed buffer.
If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which
prompts a call to eb_release_vmas() to clean up the mess. Since
eb_lookup_vmas() might fail during processing any (possibly not first)
buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know
at what point did the lookup function fail.
In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper
function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is
set to NULL in case i915_gem_object_userptr_submit_init() fails; the
current one needs to be cleaned up by eb_release_vmas() at this point,
so the next one is set. If eb_add_vma() fails, neither the current nor
the next vma is set to NULL, which is a source of a NULL deref bug
described in the issue linked in the Closes tag.
When entering eb_lookup_vmas(), the vma pointers are set to the slab
poison value, instead of NULL. This doesn't matter for the actual
lookup, since it gets overwritten anyway, however the eb_release_vmas()
function only recognizes NULL as the stopping value, hence the pointers
are being set to NULL as they go in case of intermediate failure. This
patch changes the approach to filling them all with NULL at the start
instead, rather than handling that manually during failure.
Reported-by: Gangmin Kim <km.kim1503@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15062
Fixes: 544460c338 ("drm/i915: Multi-BB execbuf")
Cc: stable@vger.kernel.org # 5.16.x
Signed-off-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251216180900.54294-2-krzysztof.niemiec@intel.com
(cherry picked from commit 08889b706d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c6915bfea upstream.
Previously this register would become 0 after IFPC took place which
broke all usages of counters.
Fixes: a6a0157cc6 ("drm/msm/a6xx: Enable IFPC on Adreno X1-85")
Cc: stable@vger.kernel.org
Signed-off-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/690960/
Message-ID: <20251127-ifpc_counters-v3-1-fac0a126bc88@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88733a0b64 upstream.
It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a
single place the check is missing.
Also use convenient locals instead of phys_enc->* where available.
Cc: stable@vger.kernel.org
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/693860/
Link: https://lore.kernel.org/r/20251211093630.171014-1-kniv@yandex-team.ru
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe3ccd2413 upstream.
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fa0af721bd ("drm/ttm: test private resv obj on release/destroy")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 425fe550fb)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80f9c601d9 upstream.
msleep is not very accurate in terms of how long it actually sleeps,
whereas usleep_range is precise. Replace the timeslice sleep for
long-running workloads with the more accurate usleep_range to avoid
jitter if the sleep period is less than 20ms.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-3-matthew.brost@intel.com
(cherry picked from commit ca415c4d4c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f0f404bd2 upstream.
A 10ms timeslice for long-running workloads is far too long and causes
significant jitter in benchmarks when the system is shared. Adjust the
value to 5ms for preempt-fencing VMs, as the resume step there is quite
costly as memory is moved around, and set it to zero for pagefault VMs,
since switching back to pagefault mode after dma-fence mode is
relatively fast.
Also change min_run_period_ms to 'unsiged int' type rather than 's64' as
only positive values make sense.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-2-matthew.brost@intel.com
(cherry picked from commit 33a5abd9a6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 449bcd5d45 upstream.
Some Xe bos are allocated with extra backing-store for the CCS
metadata. It's never been the intention to share the CCS metadata
when exporting such bos as dma-buf. Don't include it in the
dma-buf sg-table.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251209204920.224374-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit a4ebfb9d95)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 630efee949 upstream.
Add missing drm_gem_object_put() call when drm_gem_object_lookup()
successfully returns an object. This fixes a GEM object reference
leak that can prevent driver modules from unloading when using
prime buffers.
Fixes: 53096728b8 ("drm: Add DRM prime interface to reassign GEM handle")
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20251212134133.475218-1-karol.wachowski@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6cb31fba13 upstream.
Unlike the original, deleted Matrox mga driver, the new mgag200 driver
has the XRGB frame-buffer byte swapped on big-endian "RISC"
systems. Fix by enabling byte swapping "PowerPC" OPMODE for any
__BIG_ENDIAN config.
Fixes: 414c453106 ("mgag200: initial g200se driver (v2)")
Signed-off-by: René Rebe <rene@exactco.de>
Cc: stable@kernel.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251208.141827.965103015954471168.rene@exactco.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 491adc6a0f upstream.
It is possible for a BO to exist that is not currently associated with a
resource, e.g. because it has been evicted.
When devcoredump tries to read the contents of all BOs for dumping, we need
to expect this as well -- in this case, ENODATA is recorded instead of the
buffer contents.
Fixes: 7d08df5d0b ("drm/ttm: Add ttm_bo_access")
Fixes: 09ac4fcb3f ("drm/ttm: Implement vm_operations_struct.access v2")
Cc: stable <stable@kernel.org>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6271
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251013161241.709916-1-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a585c7ef9c upstream.
The drm_kms_helper_poll_fini() and drm_atomic_helper_shutdown() helpers
should only be called when the device has been successfully registered.
Currently, these functions are called unconditionally in tilcdc_fini(),
which causes warnings during probe deferral scenarios.
[ 7.972317] WARNING: CPU: 0 PID: 23 at drivers/gpu/drm/drm_atomic_state_helper.c:175 drm_atomic_helper_crtc_duplicate_state+0x60/0x68
...
[ 8.005820] drm_atomic_helper_crtc_duplicate_state from drm_atomic_get_crtc_state+0x68/0x108
[ 8.005858] drm_atomic_get_crtc_state from drm_atomic_helper_disable_all+0x90/0x1c8
[ 8.005885] drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x90/0x144
[ 8.005911] drm_atomic_helper_shutdown from tilcdc_fini+0x68/0xf8 [tilcdc]
[ 8.005957] tilcdc_fini [tilcdc] from tilcdc_pdev_probe+0xb0/0x6d4 [tilcdc]
Fix this by rewriting the failed probe cleanup path using the standard
goto error handling pattern, which ensures that cleanup functions are
only called on successfully initialized resources. Additionally, remove
the now-unnecessary is_registered flag.
Cc: stable@vger.kernel.org
Fixes: 3c4babae3c ("drm: Call drm_atomic_helper_shutdown() at shutdown/remove time for misc drivers")
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251125090546.137193-1-kory.maincent@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c7f9e528f upstream.
GCC notices that the 16-byte uabi_name field could theoretically be too
small for the formatted string if the instance number exceeds 100.
So grow the field to 20 bytes.
drivers/gpu/drm/i915/intel_memory_region.c: In function ‘intel_memory_region_create’:
drivers/gpu/drm/i915/intel_memory_region.c:273:61: error: ‘%u’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 3 and 11 [-Werror=format-truncation=]
273 | snprintf(mem->uabi_name, sizeof(mem->uabi_name), "%s%u",
| ^~
drivers/gpu/drm/i915/intel_memory_region.c:273:58: note: directive argument in the range [0, 65535]
273 | snprintf(mem->uabi_name, sizeof(mem->uabi_name), "%s%u",
| ^~~~~~
drivers/gpu/drm/i915/intel_memory_region.c:273:9: note: ‘snprintf’ output between 7 and 19 bytes into a destination of size 16
273 | snprintf(mem->uabi_name, sizeof(mem->uabi_name), "%s%u",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
274 | intel_memory_type_str(type), instance);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 3b38d35157 ("drm/i915: Add stable memory region names")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251205113500.684286-2-ardb@kernel.org
(cherry picked from commit 18476087f1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7851f8c66 upstream.
The trap may be entered with dependency checking disabled.
Wait for dependency counters and save/restore scheduling mode.
v2:
Use ttmp1 instead of ttmp11. ttmp11 is not zero-initialized.
While the trap handler does zero this field before use, a user-mode
second-level trap handler could not rely on this being zero when
using an older kernel mode driver.
v3:
Use ttmp11 primarily but copy to ttmp1 before jumping to the
second level trap handler. ttmp1 is inspectable by a debugger.
Unexpected bits in the unused space may regress existing software.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4238888794)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf32644963 upstream.
GFX1151 has 1.5x the number of available physical VGPRs per SIMD.
Bump total memory availability for acquire checks on queue creation.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b42f3bf953)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fc2796dea upstream.
This is important for userspace to avoid hardcoding VGPR size.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 71776e0965)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da67179e55 upstream.
At the moment - the memory allocation for fwsec-sb is created as-needed and
is released after being used. Typically this is at some point well after
driver load, which can cause runtime suspend/resume to initially work on
driver load but then later fail on a machine that has been running for long
enough with sufficiently high enough memory pressure:
kworker/7:1: page allocation failure: order:5, mode:0xcc0(GFP_KERNEL),
nodemask=(null),cpuset=/,mems_allowed=0
CPU: 7 UID: 0 PID: 875159 Comm: kworker/7:1 Not tainted
6.17.8-300.fc43.x86_64 #1 PREEMPT(lazy)
Hardware name: SLIMBOOK Executive/Executive, BIOS N.1.10GRU06 02/02/2024
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
warn_alloc+0x163/0x190
? __alloc_pages_direct_compact+0x1b3/0x220
__alloc_pages_slowpath.constprop.0+0x57a/0xb10
__alloc_frozen_pages_noprof+0x334/0x350
__alloc_pages_noprof+0xe/0x20
__dma_direct_alloc_pages.isra.0+0x1eb/0x330
dma_direct_alloc_pages+0x3c/0x190
dma_alloc_pages+0x29/0x130
nvkm_firmware_ctor+0x1ae/0x280 [nouveau]
nvkm_falcon_fw_ctor+0x3e/0x60 [nouveau]
nvkm_gsp_fwsec+0x10e/0x2c0 [nouveau]
? sysvec_apic_timer_interrupt+0xe/0x90
nvkm_gsp_fwsec_sb+0x27/0x70 [nouveau]
tu102_gsp_fini+0x65/0x110 [nouveau]
? ktime_get+0x3c/0xf0
nvkm_subdev_fini+0x67/0xc0 [nouveau]
nvkm_device_fini+0x94/0x140 [nouveau]
nvkm_udevice_fini+0x50/0x70 [nouveau]
nvkm_object_fini+0xb1/0x140 [nouveau]
nvkm_object_fini+0x70/0x140 [nouveau]
? __pfx_pci_pm_runtime_suspend+0x10/0x10
nouveau_do_suspend+0xe4/0x170 [nouveau]
nouveau_pmops_runtime_suspend+0x3e/0xb0 [nouveau]
pci_pm_runtime_suspend+0x67/0x1a0
? __pfx_pci_pm_runtime_suspend+0x10/0x10
__rpm_callback+0x45/0x1f0
? __pfx_pci_pm_runtime_suspend+0x10/0x10
rpm_callback+0x6d/0x80
rpm_suspend+0xe5/0x5e0
? finish_task_switch.isra.0+0x99/0x2c0
pm_runtime_work+0x98/0xb0
process_one_work+0x18f/0x350
worker_thread+0x25a/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xf9/0x240
? __pfx_kthread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0xf1/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
The reason this happens is because the fwsec-sb firmware image only
supports being booted from a contiguous coherent sysmem allocation. If a
system runs into enough memory fragmentation from memory pressure, such as
what can happen on systems with low amounts of memory, this can lead to a
situation where it later becomes impossible to find space for a large
enough contiguous allocation to hold fwsec-sb. This causes us to fail to
boot the firmware image, causing the GPU to fail booting and causing the
driver to fail.
Since this firmware can't use non-contiguous allocations, the best solution
to avoid this issue is to simply allocate the memory for fwsec-sb during
initial driver-load, and reuse the memory allocation when fwsec-sb needs to
be used. We then release the memory allocations on driver unload.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 594766ca3e ("drm/nouveau/gsp: move booter handling to GPU-specific code")
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20251202175918.63533-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35e282c186 upstream.
On hardware based on Toradex Verdin AM62 the recovery mechanism added by
commit ad5c6ecef2 ("drm: bridge: ti-sn65dsi83: Add error recovery
mechanism") has been reported [0] to make the display turn on and off and
and the kernel logging "Unexpected link status 0x01".
According to the report, the error recovery mechanism is triggered by the
PLL_UNLOCK error going active. Analysis suggested the board is unable to
provide the correct DSI clock neede by the SN65DSI84, to which the TI
SN65DSI84 reacts by raising the PLL_UNLOCK, while the display still works
apparently without issues.
On other hardware, where all the clocks are within the components
specifications, the PLL_UNLOCK bit does not trigger while the display is in
normal use. It can trigger for e.g. electromagnetic interference, which is
a transient event and exactly the reason why the error recovery mechanism
has been implemented.
Idelly the PLL_UNLOCK bit could be ignored when working out of
specification, but this requires to detect in software whether it triggers
because the device is working out of specification but visually correctly
for the user or for good reasons (e.g. EMI, or even because working out of
specifications but compromising the visual output).
The ongoing analysis as of this writing [1][2] has not yet found a way for
the driver to discriminate among the two cases. So as a temporary measure
mask the PLL_UNLOCK error bit unconditionally.
[0] https://lore.kernel.org/r/bhkn6hley4xrol5o3ytn343h4unkwsr26p6s6ltcwexnrsjsdx@mgkdf6ztow42
[1] https://lore.kernel.org/all/b71e941c-fc8a-4ac1-9407-0fe7df73b412@gmail.com/
[2] https://lore.kernel.org/all/20251125103900.31750-1-francesco@dolcini.it/
Fixes: ad5c6ecef2 ("drm: bridge: ti-sn65dsi83: Add error recovery mechanism")
Closes: https://lore.kernel.org/r/bhkn6hley4xrol5o3ytn343h4unkwsr26p6s6ltcwexnrsjsdx@mgkdf6ztow42
Cc: stable@vger.kernel.org # 6.15+
Reported-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Co-developed-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20251127-drm-ti-sn65dsi83-ignore-pll-unlock-v1-1-8a03fdf562e9@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3fe9aa495 upstream.
When there are multiple Video Ports, and only one of them is working
(for example, VP1 is working while VP0 is not), in this case, the
win_mask of VP0 is 0. However, we have already set the port mux for VP0
according to vp0->nlayers, and at the same time, in the OVL_LAYER_SEL
register, there are windows will also be assigned to layers which will
map to the inactive VPs. In this situation, vp0->win_mask is zero as it
now working, it is more reliable to calculate the used layers based on
the configuration of the OVL_LAYER_SEL register.
Note: as the configuration of OVL_LAYER_SEL is take effect when the
vsync is come, so we use the value backup in vop2->old_layer_sel instead
of read OVL_LAYER_SEL directly.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Cc: stable@vger.kernel.org
Reported-by: Diederik de Haas <diederik@cknow-tech.com>
Closes: https://bugs.kde.org/show_bug.cgi?id=511274
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Dang Huynh <dang.huynh@mainlining.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251112085024.2480111-1-andyshrk@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93a01629c8 upstream.
Unbinding amdgpu has no problems, but binding it again leads to an
error of sysfs file already existing. This is because it wasn't
actually cleaned up on unbind. Add the missing cleanup step.
Fixes: 547aad32ed ("drm/amdgpu: add VCN4 ip block support")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d717e62e9b)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0f44f74ed upstream.
Make sure to drop the references taken to the component devices by
of_find_device_by_node() during probe on probe failure (e.g. probe
deferral) and on driver unbind.
Fixes: 453c336463 ("drm/mediatek: Add ovl_adaptor support for MT8195")
Cc: stable@vger.kernel.org # 6.4
Cc: Nancy.Lin <nancy.lin@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250923152340.18234-6-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9545bae5c8 upstream.
Make sure to drop the references to the DDC adapter and CEC device
taken during probe on probe failure (e.g. probe deferral) and on driver
unbind.
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Cc: stable@vger.kernel.org # 4.8
Cc: Jie Qiu <jie.qiu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250923152340.18234-5-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a2a04be8e upstream.
Make sure to drop the reference taken to each component device during
probe on probe failure (e.g. probe deferral) and on driver unbind.
Fixes: 6ea6f82767 ("drm/mediatek: Use correct device pointer to get CMDQ client register")
Cc: stable@vger.kernel.org # 5.12
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250923152340.18234-4-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e49200593 upstream.
The Mediatek DRM driver allocates private data for components without a
platform driver but as the lifetime is tied to each component device,
the memory is never freed.
Tie the allocation lifetime to the DRM platform device so that the
memory is released on probe failure (e.g. probe deferral) and when the
driver is unbound.
Fixes: c0d36de868 ("drm/mediatek: Move clk info from struct mtk_ddp_comp to sub driver private data")
Cc: stable@vger.kernel.org # 5.12
Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250923152340.18234-3-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07c7c640a8 upstream.
Make sure to unmap and release the component iomap and clock on probe
failure (e.g. probe deferral) and on driver unbind.
Note that unlike of_iomap(), devm_of_iomap() also checks whether the
region is already mapped.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Cc: stable@vger.kernel.org # 4.7
Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250923152340.18234-2-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a846505a19 upstream.
The function mtk_dp_dt_parse() calls of_graph_get_endpoint_by_regs()
to get the endpoint device node, but fails to call of_node_put() to release
the reference when the function returns. This results in a device node
reference leak.
Fix this by adding the missing of_node_put() call before returning from
the function.
Found via static analysis and code review.
Fixes: f70ac097a2 ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251029072307.10955-1-linmq006@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d7bb790ac upstream.
Use VOP for DMA operations performed by DRM core. Rockchip DRM driver
is backed by a virtual device that isn't IOMMU-capable, while VOP is the
actual display controller device backed by IOMMU. Fixes "swiotlb buffer
is full" warning messages originated from GEM prime code paths.
Note, that backporting is non-trivial as this depends on
commit 143ec8d3f9 ("drm/prime: Support dedicated DMA device for dma-buf
imports"), which landed in v6.16 and commit 421be3ee36 ("drm/rockchip:
Refactor IOMMU initialisation"), which landed in v5.19.
Reported-by: Daniel Stone <daniels@collabora.com>
Fixes: 2048e3286f ("drm: rockchip: Add basic drm driver")
Cc: stable@vger.kernel.org # v6.16+
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251022161948.199731-1-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcb1719319 upstream.
In xe_oa_add_config_ioctl(), we accessed oa_config->id after dropping
metrics_lock. Since this lock protects the lifetime of oa_config, an
attacker could guess the id and call xe_oa_remove_config_ioctl() with
perfect timing, freeing oa_config before we dereference it, leading to
a potential use-after-free.
Fix this by caching the id in a local variable while holding the lock.
v2: (Matt A)
- Dropped mutex_unlock(&oa->metrics_lock) ordering change from
xe_oa_remove_config_ioctl()
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6614
Fixes: cdf02fe1a9 ("drm/xe/oa/uapi: Add/remove OA config perf ops")
Cc: <stable@vger.kernel.org> # v6.11+
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251118114859.3379952-2-sanjay.kumar.yadav@intel.com
(cherry picked from commit 28aeaed130)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be729f9de6 upstream.
Remove psb_fbdev_fb_setcolreg(), which hasn't been called in almost
a decade.
Gma500 commit 4d8d096e9a ("gma500: introduce the framebuffer support
code") added the helper psb_fbdev_fb_setcolreg() for setting the fbdev
palette via fbdev's fb_setcolreg callback. Later
commit 3da6c2f3b7 ("drm/gma500: use DRM_FB_HELPER_DEFAULT_OPS for
fb_ops") set several default helpers for fbdev emulation, including
fb_setcmap.
The fbdev subsystem always prefers fb_setcmap over fb_setcolreg. [1]
Hence, the gma500 code is no longer in use and gma500 has been using
drm_fb_helper_setcmap() for several years without issues.
Fixes: 3da6c2f3b7 ("drm/gma500: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops")
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Stefan Christ <contact@stefanchrist.eu>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Link: https://elixir.bootlin.com/linux/v6.16.9/source/drivers/video/fbdev/core/fbcmap.c#L246 # [1]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250929082338.18845-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4cd665c98 upstream.
Maintain two separate RB trees per order - one for clear (zeroed) blocks
and another for dirty (uncleared) blocks. This separation improves
code clarity and makes it more obvious which tree is being searched
during allocation. It also improves scalability and efficiency when
searching for a specific type of block, avoiding unnecessary checks
and making the allocator more predictable under fragmentation.
The changes have been validated using the existing drm_buddy_test
KUnit test cases, along with selected graphics workloads,
to ensure correctness and avoid regressions.
v2: Missed adding the suggested-by tag. Added it in v2.
v3(Matthew):
- Remove the double underscores from the internal functions.
- Rename the internal functions to have less generic names.
- Fix the error handling code.
- Pass tree argument for the tree macro.
- Use the existing dirty/free bit instead of new tree field.
- Make free_trees[] instead of clear_tree and dirty_tree for
more cleaner approach.
v4:
- A bug was reported by Intel CI and it is fixed by
Matthew Auld.
- Replace the get_root function with
&mm->free_trees[tree][order] (Matthew)
- Remove the unnecessary rbtree_is_empty() check (Matthew)
- Remove the unnecessary get_tree_for_flags() function.
- Rename get_tree_for_block() name with get_block_tree() for more
clarity.
v5(Jani Nikula):
- Don't use static inline in .c files.
- enum free_tree and enumerator names are quite generic for a header
and usage and the whole enum should be an implementation detail.
v6:
- Rewrite the __force_merge() function using the rb_last() and rb_prev().
v7(Matthew):
- Replace the open-coded tree iteration for loops with the
for_each_free_tree() macro throughout the code.
- Fixed out_free_roots to prevent double decrement of i,
addressing potential crash.
- Replaced enum drm_buddy_free_tree with unsigned int
in for_each_free_tree loops.
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4260
Link: https://lore.kernel.org/r/20251006095124.1663-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c178e534ff upstream.
Replace the freelist (O(n)) used for free block management with a
red-black tree, providing more efficient O(log n) search, insert,
and delete operations. This improves scalability and performance
when managing large numbers of free blocks per order (e.g., hundreds
or thousands).
In the VK-CTS memory stress subtest, the buddy manager merges
fragmented memory and inserts freed blocks into the freelist. Since
freelist insertion is O(n), this becomes a bottleneck as fragmentation
increases. Benchmarking shows list_insert_sorted() consumes ~52.69% CPU
with the freelist, compared to just 0.03% with the RB tree
(rbtree_insert.isra.0), despite performing the same sorted insert.
This also improves performance in heavily fragmented workloads,
such as games or graphics tests that stress memory.
As the buddy allocator evolves with new features such as clear-page
tracking, the resulting fragmentation and complexity have grown.
These RB-tree based design changes are introduced to address that
growth and ensure the allocator continues to perform efficiently
under fragmented conditions.
The RB tree implementation with separate clear/dirty trees provides:
- O(n log n) aggregate complexity for all operations instead of O(n^2)
- Elimination of soft lockups and system instability
- Improved code maintainability and clarity
- Better scalability for large memory systems
- Predictable performance under fragmentation
v3(Matthew):
- Remove RB_EMPTY_NODE check in force_merge function.
- Rename rb for loop macros to have less generic names and move to
.c file.
- Make the rb node rb and link field as union.
v4(Jani Nikula):
- The kernel-doc comment should be "/**"
- Move all the rbtree macros to rbtree.h and add parens to ensure
correct precedence.
v5:
- Remove the inline in a .c file (Jani Nikula).
v6(Peter Zijlstra):
- Add rb_add() function replacing the existing rbtree_insert() code.
v7:
- A full walk iteration in rbtree is slower than the list (Peter Zijlstra).
- The existing rbtree_postorder_for_each_entry_safe macro should be used
in scenarios where traversal order is not a critical factor (Christian).
v8(Matthew):
- Remove the rbtree_is_empty() check in this patch as well.
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20251006095124.1663-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 779b68a5bf upstream.
REG_A6XX_GMU_AO_AHB_FENCE_CTRL register falls under GMU's register
range. So, use gmu_write() routines to write to this register.
Fixes: 1707add815 ("drm/msm/a6xx: Add a6xx gpu state")
Cc: stable@vger.kernel.org
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688993/
Message-ID: <20251118-kaana-gpu-support-v4-1-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f2289b56c upstream.
We need to call amdgpu_vm_handle_fault() on page fault
on all gfx9 and newer parts to properly update the
page tables, not just for recoverable page faults.
Cc: stable@vger.kernel.org
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fa944255b upstream.
Users of ttm entities need to hold the gtt_window_lock before using them
to guarantee proper ordering of jobs.
Cc: stable@vger.kernel.org
Fixes: cb5cc4f573 ("drm/amdgpu: improve debug VRAM access performance using sdma")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8defb4f081 upstream.
Otherwise userspace may be fooled into believing it has a reserved VMID
when in reality it doesn't, ultimately leading to GPU hangs when SPM is
used.
Fixes: 80e709ee6e ("drm/amdgpu: add option params to enforce process isolation between graphics and compute")
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff28ff98db upstream.
We need to call amdgpu_vm_handle_fault() on page fault
on all gfx9 and newer parts to properly update the
page tables, not just for recoverable page faults.
Cc: stable@vger.kernel.org
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3925683515 upstream.
Skipping power ungate exposed some scenarios that will fail
like below:
```
amdgpu: Register(0) [regVPEC_QUEUE_RESET_REQ] failed to reach value 0x00000000 != 0x00000001n
amdgpu 0000:c1:00.0: amdgpu: VPE queue reset failed
...
amdgpu: [drm] *ERROR* wait_for_completion_timeout timeout!
```
The underlying s2idle issue that prompted this commit is going to
be fixed in BIOS.
This reverts commit 2a6c826cfe.
Fixes: 2a6c826cfe ("drm/amd: Skip power ungate during suspend for VPE")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Konstantin <answer2019@yandex.ru>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220812
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
