Commit graph

1,059,104 commits

Author SHA1 Message Date
Heiko Stuebner
c57476aba3 media: rockchip: rkisp1: remove unused irq variable
The irq variable in struct rkisp1 is unused as it is only used
to request the irq during probe, so remove it.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:36 +02:00
Stefan Riedmueller
187980e0ab media: dt-bindings: mt9p031: Add missing required properties
Add missing required clocks and supply regulator properties for the
sensor input clock and vdd, vdd_io and vaa supply regulators.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:36 +02:00
Stefan Riedmueller
e5879baf03 media: dt-bindings: mt9p031: Convert bindings to yaml
Convert mt9p031 sensor bindings to yaml schema. Also update the
MAINTAINERS entry.

Although input-clock-frequency and pixel-clock-frequency have not been
definded as endpoint propierties in the textual bindings, the sensor
does parse them from the endpoint. Thus move these properties to the
endpoint in the new yaml bindings.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:36 +02:00
Stefan Riedmueller
0a0e78d13a media: mt9p031: Use BIT macro
Make use of the BIT macro for setting individual bits. This improves
readability and safety with respect to shifts.

When on it also remove two zero value disable defines.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:35 +02:00
Dirk Bender
0961ba6dd2 media: mt9p031: Fix corrupted frame after restarting stream
To prevent corrupted frames after starting and stopping the sensor its
datasheet specifies a specific pause sequence to follow:

Stopping:
	Set Pause_Restart Bit -> Set Restart Bit -> Set Chip_Enable Off

Restarting:
	Set Chip_Enable On -> Clear Pause_Restart Bit

The Restart Bit is cleared automatically and must not be cleared
manually as this would cause undefined behavior.

Signed-off-by: Dirk Bender <d.bender@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:35 +02:00
Christian Hemp
ae47ee5fc4 media: mt9p031: Make pixel clock polarity configurable by DT
Evaluate the desired pixel clock polarity from the device tree.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:35 +02:00
Enrico Scholz
b9c18096f5 media: mt9p031: Read back the real clock rate
The real and requested clock can differ and because it is used to
calculate PLL values, the real clock rate should be read.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:35 +02:00
Niklas Söderlund
10aacfecee media: v4l2-fwnode: Simplify v4l2_async_nf_parse_fwnode_endpoints()
There are only one user left of __v4l2_async_nf_parse_fwnode_ep()
since [1], v4l2_async_nf_parse_fwnode_endpoints(). The two
functions can be merged.

The merge of the two highlights a dead code block conditioned by the
argument 'has_port' that always is false and can therefor be removed.

1. commit 0ae426ebd0 ("media: v4l2-fwnode: Remove v4l2_async_notifier_parse_fwnode_endpoints_by_port()")

[Sakari Ailus: Aligned some lines to opening parentheses.]

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:35 +02:00
Niklas Söderlund
12f6517f97 media: rcar-vin: Remove explicit device availability check
The fwnode is retrieved using fwnode_graph_get_endpoint_by_id() without
the FWNODE_GRAPH_DEVICE_DISABLED flag set. So there is no need to
explicitly check if the fwnode is available as it always will be when
the check is performed, remove it.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:35 +02:00
Sakari Ailus
3c8c153914 media: v4l: async: Rename async nf functions, clean up long lines
Rename V4L2 async notifier functions, replacing "notifier" with "nf" and
removing "_subdev" at the end of the function names adding subdevs as you
can only add subdevs to a notifier. Also wrap and otherwise clean up long
lines.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> (imx7)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:35 +02:00
Niklas Söderlund
406bb586de media: rcar-vin: Add r8a779a0 support
Add support for the R-Car V3U (r8a779a0) to the driver. The V3U has the
VIN modules connected to a ISP instead of directly to the R-Car CSI-2
receivers. The reason being that the ISP performs channel selection
based on CSI-2 VC/DT pairs and routes the video data to different VIN
modules. In other SoC versions this filtering is done by the VIN modules
themself.

While the media graph is very different from other SoCs the only
difference in operating the VIN modules is that the VC/DT filtering
should be skipped as that is performed by the ISP.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:35 +02:00
Niklas Söderlund
688565db3f media: rcar-vin: Move and rename CSI-2 link notifications
The CSI-2 link notifications are no longer the only option for the VIN
group. Change the symbol prefix to rvin_csi2_ for all CSI-2 specific
code and move the link notification code to the correct section not to
mix it with the soon to be added R-Car ISP channel selector notification
helpers.

There is no functional change and apart from the symbol prefix change
all functions are moved verbatim.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:34 +02:00
Niklas Söderlund
c370dd7fa8 media: rcar-vin: Specify media device ops at group creation time
The media device operations structure will be different depending on
what media graph layout is used. Instead of hard-coding the R-Car CSI-2
layout allow the operations to be passed as an argument.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:34 +02:00
Niklas Söderlund
cfef0c833a media: rcar-vin: Create a callback to setup media links
New IP versions will have different media graphs and require a different
link setup. Breakout the specific link setup to a callback that are
associated with the group.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:34 +02:00
Niklas Söderlund
9c83300146 media: rcar-vin: Extend group notifier DT parser to work with any port
The R-Car VIN group notifier will be extend to support a new group of
subdevices, the R-Car ISP channel selector in addition to the existing
R-Car CSI-2 receiver subdevices.

The existing DT parsing code can be reused if the port and max number of
endpoints are provided as parameters instead of being hard-coded. While
at it align the group notifier parser function names with the rest of
the driver.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:34 +02:00
Niklas Söderlund
2070893aed media: rcar-vin: Move group async notifier
The VIN group notifier code is intertwined with the media graph layout
code for R-Car CSI-2 subdevices, this makes it hard to extend the group
to also support the R-Car ISP channel selector.

Before breaking the two concepts apart and extending it move the group
code to its final location. There is no functional change and all
functions are moved verbatim.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:34 +02:00
Niklas Söderlund
161b56a82d media: rcar-vin: Rename array storing subdevice information
The VIN group have always been connected to CSI-2 receivers and this
have spilled over to the naming of the array storing the subdevice
information. In preparation for connecting other types of subdevices
rename the array to remotes.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:34 +02:00
Niklas Söderlund
27b9a6f9e8 media: rcar-vin: Improve reuse of parallel notifier
In preparation for adding a new media graph layout move the code reuse
of the parallel notifier setup from probe directly to the current media
graph initialization function. This is needed as there will be no
parallel interface in the new graph layout.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:34 +02:00
Niklas Söderlund
6df3057792 media: rcar-vin: Improve async notifier cleanup paths
The cleanup code for the async notifiers can be refactored to own
functions to reduce code duplication and improve readability. While at
it rename the CSI-2 initialization function _csi2_ instead of _mc_ to
match.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:34 +02:00
Niklas Söderlund
8f7112630b media: rcar-vin: Fix error paths for rvin_mc_init()
The error paths of rvin_mc_init() do not clean up properly, fix this.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:33 +02:00
Niklas Söderlund
b2dc5680ae media: rcar-vin: Refactor controls creation for video device
The controls for the video device are created in different code paths
depending on if the driver is using the media graph centric model (Gen3)
or the device centric model (Gen2 and earlier). This have lead to code
duplication that can be consolidated.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:33 +02:00
Niklas Söderlund
b4173cd998 media: rcar-csi2: Add r8a779a0 support
Add support for the R-Car V3U (r8a779a0) to the driver. The V3U have the
CSI-2 modules connected to ISPs instead of directly to the R-Car VIN DMA
engines.

The ISP performs channel selection based on CSI-2 VC/DT pairs and routes
the video data. This requires the R-Car CSI-2 media entity to modeled
differently then on other SoCs as it on the V3U only have a single
source pad connected to the ISP.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:33 +02:00
Niklas Söderlund
c624fe63c0 media: dt-bindings: media: renesas,csi2: Add r8a779a0 support
Add support for R-Car V3U.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:33 +02:00
Alexey Kardashevskiy
23c216b335 powerpc/iommu: Report the correct most efficient DMA mask for PCI devices
According to dma-api.rst, the dma_get_required_mask() helper should return
"the mask that the platform requires to operate efficiently". Which in
the case of PPC64 means the bypass mask and not a mask from an IOMMU table
which is shorter and slower to use due to map/unmap operations (especially
expensive on "pseries").

However the existing implementation ignores the possibility of bypassing
and returns the IOMMU table mask on the pseries platform which makes some
drivers (mpt3sas is one example) choose 32bit DMA even though bypass is
supported. The powernv platform sort of handles it by having a bigger
default window with a mask >=40 but it only works as drivers choose
63/64bit if the required mask is >32 which is rather pointless.

This reintroduces the bypass capability check to let drivers make
a better choice of the DMA mask.

Fixes: f1565c24b5 ("powerpc: use the generic dma_ops_bypass mode")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210930034454.95794-1-aik@ozlabs.ru
2021-09-30 17:10:17 +10:00
Kumar Kartikeya Dwivedi
e68ac00827 libbpf: Fix skel_internal.h to set errno on loader retval < 0
When the loader indicates an internal error (result of a checked bpf
system call), it returns the result in attr.test.retval. However, tests
that rely on ASSERT_OK_PTR on NULL (returned from light skeleton) may
miss that NULL denotes an error if errno is set to 0. This would result
in skel pointer being NULL, while ASSERT_OK_PTR returning 1, leading to
a SEGV on dereference of skel, because libbpf_get_error relies on the
assumption that errno is always set in case of error for ptr == NULL.

In particular, this was observed for the ksyms_module test. When
executed using `./test_progs -t ksyms`, prior tests manipulated errno
and the test didn't crash when it failed at ksyms_module load, while
using `./test_progs -t ksyms_module` crashed due to errno being
untouched.

Fixes: 6723474373 (libbpf: Generate loader program out of BPF ELF file.)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-11-memxor@gmail.com
2021-09-29 20:42:32 -07:00
Nick Desaulniers
41e76c6a3c nbd: use shifts rather than multiplies
commit fad7cd3310 ("nbd: add the check to prevent overflow in
__nbd_ioctl()") raised an issue from the fallback helpers added in
commit f0907827a8 ("compiler.h: enable builtin overflow checkers and
add fallback code")

ERROR: modpost: "__divdi3" [drivers/block/nbd.ko] undefined!

As Stephen Rothwell notes:
  The added check_mul_overflow() call is being passed 64 bit values.
  COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW is not set for this build (see
  include/linux/overflow.h).

Specifically, the helpers for checking whether the results of a
multiplication overflowed (__unsigned_mul_overflow,
__signed_add_overflow) use the division operator when
!COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW.  This is problematic for 64b
operands on 32b hosts.

This was fixed upstream by
commit 76ae847497 ("Documentation: raise minimum supported version of
GCC to 5.1")
which is not suitable to be backported to stable.

Further, __builtin_mul_overflow() would emit a libcall to a
compiler-rt-only symbol when compiling with clang < 14 for 32b targets.

ld.lld: error: undefined symbol: __mulodi4

In order to keep stable buildable with GCC 4.9 and clang < 14, modify
struct nbd_config to instead track the number of bits of the block size;
reconstructing the block size using runtime checked shifts that are not
problematic for those compilers and in a ways that can be backported to
stable.

In nbd_set_size, we do validate that the value of blksize must be a
power of two (POT) and is in the range of [512, PAGE_SIZE] (both
inclusive).

This does modify the debugfs interface.

Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/
Link: https://lore.kernel.org/stable/CAHk-=whiQBofgis_rkniz8GBP9wZtSZdcDEffgSLO62BUGV3gg@mail.gmail.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210920232533.4092046-1-ndesaulniers@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-29 20:31:41 -06:00
Gustavo A. R. Silva
69508d4333 net_sched: Use struct_size() and flex_array_size() helpers
Make use of the struct_size() and flex_array_size() helpers instead of
an open-coded version, in order to avoid any potential type mistakes
or integer overflows that, in the worse scenario, could lead to heap
overflows.

Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210928193107.GA262595@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-29 18:56:53 -07:00
Toke Høiland-Jørgensen
161ecd5379 libbpf: Properly ignore STT_SECTION symbols in legacy map definitions
The previous patch to ignore STT_SECTION symbols only added the ignore
condition in one of them. This fails if there's more than one map
definition in the 'maps' section, because the subsequent modulus check will
fail, resulting in error messages like:

libbpf: elf: unable to determine legacy map definition size in ./xdpdump_xdp.o

Fix this by also ignoring STT_SECTION in the first loop.

Fixes: c3e8c44a90 ("libbpf: Ignore STT_SECTION symbols in 'maps' section")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210929213837.832449-1-toke@redhat.com
2021-09-29 15:50:32 -07:00
Chia-Wei Wang
ae11ad385f dt-bindings: aspeed: Add UART routing controller
Add dt-bindings for Aspeed UART routing controller.

Signed-off-by: Oskar Senft <osk@google.com>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210927023053.6728-4-chiawei_wang@aspeedtech.com
2021-09-29 17:11:08 -05:00
Chia-Wei Wang
a2db23c110 dt-bindings: mfd: aspeed-lpc: Convert to YAML schema
Convert the bindings of Aspeed LPC from text file into YAML schema.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Link: https://lore.kernel.org/r/20210927023053.6728-3-chiawei_wang@aspeedtech.com
[robh: Add 'additionalProperties: false' in child nodes and #reset-cells]
Signed-off-by: Rob Herring <robh@kernel.org>
2021-09-29 17:10:27 -05:00
Zhan Liu
0ad53fe3ae drm/amdgpu: add cyan_skillfish asic header files
This patch is to add cyan_skillfish asic header files.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Jun Lei <jun.lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Andrey Grodzovsky
5c67ff3a4c drm/amdgpu: Add a UAPI flag for hot plug/unplug
To support libdrm tests.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Andrey Grodzovsky
894c6890a2 drm/amdgpu: drm/amdgpu: Handle IOMMU enabled case
Handle all DMA IOMMU group related dependencies before the
group is removed and we try to access it after free.

v2:
Move the actul handling function to TTM

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Ernst Sjöstrand
5039f52988 drm/amd/amdgpu: Validate ip discovery blob
We use the number_instance index that we get from the fw discovery blob
to index into an array for example.

Update error messages (Alex)

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Arnd Bergmann
0069a22738 gpu: amd: replace open-coded offsetof() with builtin
The two AMD drivers have their own custom offsetof() implementation
that now triggers a warning with recent versions of clang:

drivers/gpu/drm/radeon/radeon_atombios.c:133:14: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction]

Change all the instances to use the normal offsetof() provided
by the kernel that does not have this problem.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Yang Li
0de5472a01 drm/amdkfd: fix resource_size.cocci warnings
Use resource_size function on resource object
instead of explicit computation.

Clean up coccicheck warning:
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:905:10-13: ERROR: Missing
resource_size with res

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Arnd Bergmann
335aea75b0 drm/amdgpu: fix warning for overflow check
The overflow check in amdgpu_bo_list_create() causes a warning with
clang-14 on 64-bit architectures, since the limit can never be
exceeded.

drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c:74:18: error: result of comparison of constant 256204778801521549 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
        if (num_entries > (SIZE_MAX - sizeof(struct amdgpu_bo_list))
            ~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The check remains useful for 32-bit architectures, so just avoid the
warning by using size_t as the type for the count.

Fixes: 920990cb08 ("drm/amdgpu: allocate the bo_list array after the list")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Simon Ser
2f350ddadc drm/amdgpu: check tiling flags when creating FB on GFX8-
On GFX9+, format modifiers are always enabled and ensure the
frame-buffers can be scanned out at ADDFB2 time.

On GFX8-, format modifiers are not supported and no other check
is performed. This means ADDFB2 IOCTLs will succeed even if the
tiling isn't supported for scan-out, and will result in garbage
displayed on screen [1].

Fix this by adding a check for tiling flags for GFX8 and older.
The check is taken from radeonsi in Mesa (see how is_displayable
is populated in gfx6_compute_surface).

Changes in v2: use drm_WARN_ONCE instead of drm_WARN (Michel)

[1]: https://github.com/swaywm/wlroots/issues/3185

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Tom St Denis
ce9c1d8c71 drm/amd/amdgpu: Add missing mp_11_0_8_sh_mask.h header
The commit 2766534b76 added the offset
header but didn't add the masks.  This adds the masks based on what
was selected for the offsets.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Charlene Liu
dae66a0445 drm/amd/display: Pass PCI deviceid into DC
[why]
pci deviceid not passed to dal dc, without proper break,
dcn2.x falls into dcn3.x code path

[how]
pass in pci deviceid, and break once dal_version initialized.

Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
George Shen
356af2f32f drm/amd/display: Update VCP X.Y logging to improve usefulness
[Why]
Recently debugging efforts have involved setting/checking the
X.Y value used during payload allocation. Current output for
Y was calculated with incorrect bitshift. Y value is also not
human readable.

[How]
Refactor logging into separate function. Fix Y calculation error
and format output to be human readable.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
George Shen
3626a6aebe drm/amd/display: Handle Y carry-over in VCP X.Y calculation
[Why/How]
Theoretically rare corner case where ceil(Y) results in rounding
up to an integer. If this happens, the 1 should be carried over to
the X value.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Wenjing Liu
c01baf22da drm/amd/display: make verified link cap not exceeding max link cap
[why]
There is a chance verified link cap can be greater than max link cap.
This causes software hang because we cannot power up PHY with link rate
that cannot handle.
The change is to guard verfieid link cap from becoming larger than max link cap
our PHy can support.

Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:30:00 -04:00
Josip Pavic
7506899408 drm/amd/display: initialize backlight_ramping_override to false
[Why]
Stack variable params.backlight_ramping_override is uninitialized, so it
contains junk data

[How]
Initialize the variable to false

Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:29:59 -04:00
Michael Strauss
028a998c62 drm/amd/display: Defer LUT memory powerdown until LUT bypass latches
[WHY]
Blnd, 3dlut, and shaper LUT select registers are double buffered, however
their accompanying LUT memory shutdown registers are not. As a result,
shutting down LUT memory immediately after setting a block to bypass causes
corruption as bypass only happens at next Vupdate.

[HOW]
Re-enable mem low power for CM block
Force optimization on next flip and disable LUT memory during optimization
sequence if LUT select field is then set to bypass

v2: squash in CONFIG_DRM_AMD_DC_DCN fix (Alex)

Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29 17:29:59 -04:00
Kai-Heng Feng
7c3855c423 PCI: Coalesce host bridge contiguous apertures
Built-in graphics at 07:00.0 on HP EliteDesk 805 G6 doesn't work because
graphics can't get the BAR it needs.  The BIOS configuration is
correct: BARs 0 and 2 both fit in the 00:08.1 bridge window.

But that 00:08.1 window covers two host bridge apertures from _CRS.
Previously we assumed this was illegal, so we clipped the window to fit
into one aperture (see 0f7e7aee2f ("PCI: Add pci_bus_clip_resource() to
clip to fit upstream window")).

  pci_bus 0000:00: root bus resource [mem 0x10020200000-0x100303fffff window]
  pci_bus 0000:00: root bus resource [mem 0x10030400000-0x100401fffff window]

  pci 0000:00:08.1:   bridge window [mem 0x10030000000-0x100401fffff 64bit pref]
  pci 0000:07:00.0: reg 0x10: [mem 0x10030000000-0x1003fffffff 64bit pref]
  pci 0000:07:00.0: reg 0x18: [mem 0x10040000000-0x100401fffff 64bit pref]

  pci 0000:00:08.1: can't claim BAR 15 [mem 0x10030000000-0x100401fffff 64bit pref]: no compatible bridge window
  pci 0000:00:08.1: [mem 0x10030000000-0x100401fffff 64bit pref] clipped to [mem 0x10030000000-0x100303fffff 64bit pref]
  pci 0000:00:08.1:   bridge window [mem 0x10030000000-0x100303fffff 64bit pref]

  pci 0000:07:00.0: can't claim BAR 0 [mem 0x10030000000-0x1003fffffff 64bit pref]: no compatible bridge window
  pci 0000:07:00.0: can't claim BAR 2 [mem 0x10040000000-0x100401fffff 64bit pref]: no compatible bridge window

However, the host bridge apertures are contiguous, so there's no need to
clip in this case.  Coalesce contiguous apertures so we can allocate from
the entire contiguous region.

Previous commit 65db04053e ("PCI: Coalesce host bridge contiguous
apertures") was similar but sorted the apertures, and Guenter Roeck
reported a regression in ppc:sam460ex qemu emulation from nvme; see
https://lore.kernel.org/all/20210709231529.GA3270116@roeck-us.net/

[bhelgaas: commit log]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212013
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20210713125007.1260304-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>
2021-09-29 16:25:20 -05:00
Namjae Jeon
ce812992f2 ksmbd: remove NTLMv1 authentication
Remove insecure NTLMv1 authentication.

Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Acked-by: Steve French <smfrench@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-09-29 16:17:34 -05:00
Lorenz Bauer
de21d8bf77 bpf: Do not invoke the XDP dispatcher for PROG_RUN with single repeat
We have a unit test that invokes an XDP program with 1m different
inputs, aka 1m BPF_PROG_RUN syscalls. We run this test concurrently
with slight variations in how we generated the input.

Since commit f23c4b3924 ("bpf: Start using the BPF dispatcher in BPF_TEST_RUN")
the unit test has slowed down significantly. Digging deeper reveals that
the concurrent tests are serialised in the kernel on the XDP dispatcher.
This is a global resource that is protected by a mutex, on which we contend.

Fix this by not calling into the XDP dispatcher if we only want to perform
a single run of the BPF program.

See: https://lore.kernel.org/bpf/CACAyw9_y4QumOW35qpgTbLsJ532uGq-kVW-VESJzGyiZkypnvw@mail.gmail.com/

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210928093100.27124-1-lmb@cloudflare.com
2021-09-29 14:10:05 -07:00
Michael Brunner
647d908816 i2c: kempld: deprecate class based instantiation
Warn users that class based instantiation is going away soon in favour
of more robust probing and faster bootup times.

Class based instantiation has already been removed for other controllers
and it makes absolutely sense to do it for this one too.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Ingmar Klein <ingmar.klein@kontron.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-09-29 23:07:02 +02:00
zhaoxiao
ed2f85115a i2c: bcm-kona: Fix return value in probe()
When call function devm_platform_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.

Signed-off-by: zhaoxiao <long870912@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-09-29 23:05:05 +02:00