[Why]
PSR can disable the HUBP along with the OTG when PSR is active.
We'll hit a pageflip timeout when the OTG is disable because we're no
longer updating the CRTC vblank counter and the pflip high IRQ will
not fire on the flip.
In order to flip the page flip timeout occur we should modify the
enter/exit conditions to match DRM requirements.
[How]
Use our deferred handlers for DRM vblank control to notify DMCU(B)
when it can enable or disable PSR based on whether vblank is disabled or
enabled respectively.
We'll need to pass along the stream with the notification now because
we want to access the CRTC state while the CRTC is locked to get the
stream state prior to the commit.
Retain a reference to the stream so it remains safe to continue to
access and release that reference once we're done with it.
Enable/disable logic follows what we were previously doing in
update_planes.
The workqueue has to be flushed before programming streams or planes
to ensure that we exit out of idle optimizations and PSR before
these events occur if necessary.
To keep the skip count logic the same to avoid FBCON PSR enablement
requires copying the allow condition onto the DM IRQ parameters - a
field that we can actually access from the worker.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The current implementation for idle optimization support only has a
single work item that gets reshuffled into the system workqueue
whenever we receive an enable or disable event.
We can have mismatched events if the work hasn't been processed or if
we're getting control events from multiple displays at once.
This fixes this issue and also makes the implementation usable for
PSR control - which will be addressed in another patch.
[How]
We need to be able to flush remaining work out on demand for driver stop
and psr disable so create a driver specific workqueue instead of using
the system one. The workqueue will be single threaded to guarantee the
ordering of enable/disable events.
Refactor the queue to allocate the control work and deallocate it
after processing it.
Pass the acrtc directly to make it easier to handle psr enable/disable
in a later patch.
Rename things to indicate that it's not just MALL specific.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While reading remote EDID via Startech 1-to-4 hub, occasionally we
won't get response in time and won't light up corresponding monitor.
Ideally, we can still add generic modes for userspace to choose to try
to light up the monitor and which is done in
drm_helper_probe_single_connector_modes(). So the main problem here is
that we fail .mode_valid since we don't create remote dc_sink for this
case.
[How]
Also add default dc_sink if we can't get the EDID.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These registers have different address from other SMU V11 ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the fan control was guarded under manual mode before fan speed
RPM/PWM setting. Thus the extra check is totally redundant.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, the readout of fan speed pwm is transited into percent-based
and then pwm-based. However, the transition into percent-based is totally
unnecessary and make the final output less accurate.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, we need a new way to
retrieving the fan speed RPM.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, we need a new way to
retrieving the fan speed PWM.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, both the RPM and PWM
settings need to be saved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, we need a new way to
perform the fan speed RPM setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete ras_if->name in the RAS ctx structure and remove related lines.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use DEFINE_RES_MEM_NAMED() to save a couple of lines of code, which makes
the code a bit shorter and easier to read.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Simplify the platform_get_resource() and devm_ioremap_resource()
calls with devm_platform_ioremap_resource().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.
Instead of adding ifdeffery here and there, drop ACPI_PTR() and
replace acpi.h with mod_devicetable.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Asmaa Mnehi <asmaa@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
KFDSVMRangeTest.SetGetAttributesTest randomly fails in stress test.
Note: Google Test filter = KFDSVMRangeTest.*
[==========] Running 18 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 18 tests from KFDSVMRangeTest
[ RUN ] KFDSVMRangeTest.BasicSystemMemTest
[ OK ] KFDSVMRangeTest.BasicSystemMemTest (30 ms)
[ RUN ] KFDSVMRangeTest.SetGetAttributesTest
[ ] Get default atrributes
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure
Value of: expectedDefaultResults[i]
Actual: 4294967295
Expected: outputAttributes[i].value
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure
Value of: expectedDefaultResults[i]
Actual: 4294967295
Expected: outputAttributes[i].value
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:152: Failure
Value of: expectedDefaultResults[i]
Actual: 4
Expected: outputAttributes[i].type
Which is: 2
[ ] Setting/Getting atrributes
[ FAILED ]
the root cause is that svm work queue has not finished when svm_range_get_attr is called, thus
some garbage svm interval tree data make svm_range_get_attr get wrong result. Flush work queue before
iterate svm interval tree.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
change the workload type for some cards as it is needed.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 0979d43259.
Revert this because it does not apply to all the cards.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When guest received FLR notification from host, it would
lock adapter into reset state. There will be no more
job submission and hardware access after that.
Then it should send a response to host that it has prepared
for host reset.
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the following clock is only support voltage DPM, change attribute to RO:
1. pp_dpm_sclk
2. pp_dpm_mclk
3. pp_dpm_fclk
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the following message is allowed in sriov mode:
1. GetEnabledSmuFeaturesLow
2. GetEnabledSmuFeaturesHigh
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
1. change return value to avoid smu driver probe fails when FEATURE_PPT is
not enabled.
2. if FEATURE_PPT is not enabled, set power limit value to 0.
v2:
instead dev_err with dev_warn
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
1. skip to load smu firmware in sriov mode for aldebaran chip
2. using vbios pptable if in sriov mode.
v2:
clean up smu driver code in sriov code path
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the following feature is wrong, it will cause sysnode of pp_features show error:
1. DPM_XGMI
2. VCN_DPM
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why: Previously hw fence is alloced separately with job.
It caused historical lifetime issues and corner cases.
The ideal situation is to take fence to manage both job
and fence's lifetime, and simplify the design of gpu-scheduler.
How:
We propose to embed hw_fence into amdgpu_job.
1. We cover the normal job submission by this method.
2. For ib_test, and submit without a parent job keep the
legacy way to create a hw fence separately.
v2:
use AMDGPU_FENCE_FLAG_EMBED_IN_JOB_BIT to show that the fence is
embedded in a job.
v3:
remove redundant variable ring in amdgpu_job
v4:
add tdr sequence support for this feature. Add a job_run_counter to
indicate whether this job is a resubmit job.
v5
add missing handling in amdgpu_fence_enable_signaling
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Jack Zhang <Jack.Zhang7@hotmail.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modern-day mapping_set_error has the ability to squash the usual
negative error code into something appropriate for long-term storage in
a struct address_space -- ENOSPC becomes AS_ENOSPC, and everything else
becomes EIO. iomap squashes /everything/ to EIO, just as XFS did before
that, but this doesn't make sense.
Fix this by making it so that we can pass ENOSPC to userspace when
writeback fails due to space problems.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
We only use the CIL workqueue in the CIL, so it makes no sense to
hang it off the xfs_mount and have to walk multiple pointers back up
to the mount when we have the CIL structures right there.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Because we use a single work structure attached to the CIL rather
than the CIL context, we can only queue a single work item at a
time. This results in the CIL being single threaded and limits
performance when it becomes CPU bound.
The design of the CIL is that it is pipelined and multiple commits
can be running concurrently, but the way the work is currently
implemented means that it is not pipelining as it was intended. The
critical work to switch the CIL context can take a few milliseconds
to run, but the rest of the CIL context flush can take hundreds of
milliseconds to complete. The context switching is the serialisation
point of the CIL, once the context has been switched the rest of the
context push can run asynchrnously with all other context pushes.
Hence we can move the work to the CIL context so that we can run
multiple CIL pushes at the same time and spread the majority of
the work out over multiple CPUs. We can keep the per-cpu CIL commit
state on the CIL rather than the context, because the context is
pinned to the CIL until the switch is done and we aggregate and
drain the per-cpu state held on the CIL during the context switch.
However, because we no longer serialise the CIL work, we can have
effectively unlimited CIL pushes in progress. We don't want to do
this - not only does it create contention on the iclogs and the
state machine locks, we can run the log right out of space with
outstanding pushes. Instead, limit the work concurrency to 4
concurrent works being processed at a time. This is enough
concurrency to remove the CIL from being a CPU bound bottleneck but
not enough to create new contention points or unbound concurrency
issues.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The AIL pushing is stalling on log forces when it comes across
pinned items. This is happening on removal workloads where the AIL
is dominated by stale items that are removed from AIL when the
checkpoint that marks the items stale is committed to the journal.
This results is relatively few items in the AIL, but those that are
are often pinned as directories items are being removed from are
still being logged.
As a result, many push cycles through the CIL will first issue a
blocking log force to unpin the items. This can take some time to
complete, with tracing regularly showing push delays of half a
second and sometimes up into the range of several seconds. Sequences
like this aren't uncommon:
....
399.829437: xfsaild: last lsn 0x11002dd000 count 101 stuck 101 flushing 0 tout 20
<wanted 20ms, got 270ms delay>
400.099622: xfsaild: target 0x11002f3600, prev 0x11002f3600, last lsn 0x0
400.099623: xfsaild: first lsn 0x11002f3600
400.099679: xfsaild: last lsn 0x1100305000 count 16 stuck 11 flushing 0 tout 50
<wanted 50ms, got 500ms delay>
400.589348: xfsaild: target 0x110032e600, prev 0x11002f3600, last lsn 0x0
400.589349: xfsaild: first lsn 0x1100305000
400.589595: xfsaild: last lsn 0x110032e600 count 156 stuck 101 flushing 30 tout 50
<wanted 50ms, got 460ms delay>
400.950341: xfsaild: target 0x1100353000, prev 0x110032e600, last lsn 0x0
400.950343: xfsaild: first lsn 0x1100317c00
400.950436: xfsaild: last lsn 0x110033d200 count 105 stuck 101 flushing 0 tout 20
<wanted 20ms, got 200ms delay>
401.142333: xfsaild: target 0x1100361600, prev 0x1100353000, last lsn 0x0
401.142334: xfsaild: first lsn 0x110032e600
401.142535: xfsaild: last lsn 0x1100353000 count 122 stuck 101 flushing 8 tout 10
<wanted 10ms, got 10ms delay>
401.154323: xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x1100353000
401.154328: xfsaild: first lsn 0x1100353000
401.154389: xfsaild: last lsn 0x1100353000 count 101 stuck 101 flushing 0 tout 20
<wanted 20ms, got 300ms delay>
401.451525: xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x0
401.451526: xfsaild: first lsn 0x1100353000
401.451804: xfsaild: last lsn 0x1100377200 count 170 stuck 22 flushing 122 tout 50
<wanted 50ms, got 500ms delay>
401.933581: xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x0
....
In each of these cases, every AIL pass saw 101 log items stuck on
the AIL (pinned) with very few other items being found. Each pass, a
log force was issued, and delay between last/first is the sleep time
+ the sync log force time.
Some of these 101 items pinned the tail of the log. The tail of the
log does slowly creep forward (first lsn), but the problem is that
the log is actually out of reservation space because it's been
running so many transactions that stale items that never reach the
AIL but consume log space. Hence we have a largely empty AIL, with
long term pins on items that pin the tail of the log that don't get
pushed frequently enough to keep log space available.
The problem is the hundreds of milliseconds that we block in the log
force pushing the CIL out to disk. The AIL should not be stalled
like this - it needs to run and flush items that are at the tail of
the log with minimal latency. What we really need to do is trigger a
log flush, but then not wait for it at all - we've already done our
waiting for stuff to complete when we backed off prior to the log
force being issued.
Even if we remove the XFS_LOG_SYNC from the xfs_log_force() call, we
still do a blocking flush of the CIL and that is what is causing the
issue. Hence we need a new interface for the CIL to trigger an
immediate background push of the CIL to get it moving faster but not
to wait on that to occur. While the CIL is pushing, the AIL can also
be pushing.
We already have an internal interface to do this -
xlog_cil_push_now() - but we need a wrapper for it to be used
externally. xlog_cil_force_seq() can easily be extended to do what
we need as it already implements the synchronous CIL push via
xlog_cil_push_now(). Add the necessary flags and "push current
sequence" semantics to xlog_cil_force_seq() and convert the AIL
pushing to use it.
One of the complexities here is that the CIL push does not guarantee
that the commit record for the CIL checkpoint is written to disk.
The current log force ensures this by submitting the current ACTIVE
iclog that the commit record was written to. We need the CIL to
actually write this commit record to disk for an async push to
ensure that the checkpoint actually makes it to disk and unpins the
pinned items in the checkpoint on completion. Hence we need to pass
down to the CIL push that we are doing an async flush so that it can
switch out the commit_iclog if necessary to get written to disk when
the commit iclog is finally released.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Because log recovery depends on strictly ordered start records as
well as strictly ordered commit records.
This is a zero day bug in the way XFS writes pipelined transactions
to the journal which is exposed by fixing the zero day bug that
prevents the CIL from pipelining checkpoints. This re-introduces
explicit concurrent commits back into the on-disk journal and hence
out of order start records.
The XFS journal commit code has never ordered start records and we
have relied on strict commit record ordering for correct recovery
ordering of concurrently written transactions. Unfortunately, root
cause analysis uncovered the fact that log recovery uses the LSN of
the start record for transaction commit processing. Hence, whilst
the commits are processed in strict order by recovery, the LSNs
associated with the commits can be out of order and so recovery may
stamp incorrect LSNs into objects and/or misorder intents in the AIL
for later processing. This can result in log recovery failures
and/or on disk corruption, sometimes silent.
Because this is a long standing log recovery issue, we can't just
fix log recovery and call it good. This still leaves older kernels
susceptible to recovery failures and corruption when replaying a log
from a kernel that pipelines checkpoints. There is also the issue
that in-memory ordering for AIL pushing and data integrity
operations are based on checkpoint start LSNs, and if the start LSN
is incorrect in the journal, it is also incorrect in memory.
Hence there's really only one choice for fixing this zero-day bug:
we need to strictly order checkpoint start records in ascending
sequence order in the log, the same way we already strictly order
commit records.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Now that we have a mechanism to guarantee that the callbacks
attached to an iclog are owned by the context that attaches them
until they drop their reference to the iclog via
xlog_state_release_iclog(), we can attach callbacks to the iclog at
any time we have an active reference to the iclog.
xlog_state_get_iclog_space() always guarantees that the commit
record will fit in the iclog it returns, so we can move this IO
callback setting to xlog_cil_set_ctx_write_state(), record the
commit iclog in the context and remove the need for the commit iclog
to be returned by xlog_write() altogether.
This, in turn, allows us to move the wakeup for ordered commit
record writes up into xlog_cil_set_ctx_write_state(), too, because
we have been guaranteed that this commit record will be physically
located in the iclog before any waiting commit record at a higher
sequence number will be granted iclog space.
This further cleans up the post commit record write processing in
the CIL push code, especially as xlog_state_release_iclog() will now
clean up the context when shutdown errors occur.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
So we can use it for start record ordering as well as commit record
ordering in future.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pass the CIL context to xlog_write() rather than a pointer to a LSN
variable. Only the CIL checkpoint calls to xlog_write() need to know
about the start LSN of the writes, so rework xlog_write to directly
write the LSNs into the CIL context structure.
This removes the commit_lsn variable from xlog_cil_push_work(), so
now we only have to issue the commit record ordering wakeup from
there.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
It is only used by the CIL checkpoints, and is the counterpart to
start record formatting and writing that is already local to
xfs_log_cil.c.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
I'm seeing assert failures from xlog_space_left() after a shutdown
has begun that look like:
XFS (dm-0): log I/O error -5
XFS (dm-0): xfs_do_force_shutdown(0x2) called from line 1338 of file fs/xfs/xfs_log.c. Return address = xlog_ioend_work+0x64/0xc0
XFS (dm-0): Log I/O Error Detected.
XFS (dm-0): Shutting down filesystem. Please unmount the filesystem and rectify the problem(s)
XFS (dm-0): xlog_space_left: head behind tail
XFS (dm-0): tail_cycle = 6, tail_bytes = 2706944
XFS (dm-0): GH cycle = 6, GH bytes = 1633867
XFS: Assertion failed: 0, file: fs/xfs/xfs_log.c, line: 1310
------------[ cut here ]------------
Call Trace:
xlog_space_left+0xc3/0x110
xlog_grant_push_threshold+0x3f/0xf0
xlog_grant_push_ail+0x12/0x40
xfs_log_reserve+0xd2/0x270
? __might_sleep+0x4b/0x80
xfs_trans_reserve+0x18b/0x260
.....
There are two things here. Firstly, after a shutdown, the log head
and tail can be out of whack as things abort and release (or don't
release) resources, so checking them for sanity doesn't make much
sense. Secondly, xfs_log_reserve() can race with shutdown and so it
can still fail like this even though it has already checked for a
log shutdown before calling xlog_grant_push_ail().
So, before ASSERT failing in xlog_space_left(), make sure we haven't
already shut down....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
When the log is shutdown, it currently walks all the iclogs and runs
callbacks that are attached to the iclogs, regardless of whether the
iclog is queued for IO completion or not. This creates a problem for
contexts attaching callbacks to iclogs in that a racing shutdown can
run the callbacks even before the attaching context has finished
processing the iclog and releasing it for IO submission.
If the callback processing of the iclog frees the structure that is
attached to the iclog, then this leads to an UAF scenario that can
only be protected against by holding the icloglock from the point
callbacks are attached through to the release of the iclog. While we
currently do this, it is not practical or sustainable.
Hence we need to make shutdown processing the responsibility of the
context that holds active references to the iclog. We know that the
contexts attaching callbacks to the iclog must have active
references to the iclog, and that means they must be in either
ACTIVE or WANT_SYNC states. xlog_state_do_callback() will skip over
iclogs in these states -except- when the log is shut down.
xlog_state_do_callback() checks the state of the iclogs while
holding the icloglock, therefore the reference count/state change
that occurs in xlog_state_release_iclog() after the callbacks are
atomic w.r.t. shutdown processing.
We can't push the responsibility of callback cleanup onto the CIL
context because we can have ACTIVE iclogs that have callbacks
attached that have already been released. Hence we really need to
internalise the cleanup of callbacks into xlog_state_release_iclog()
processing.
Indeed, we already have that internalisation via:
xlog_state_release_iclog
drop last reference
->SYNCING
xlog_sync
xlog_write_iclog
if (log_is_shutdown)
xlog_state_done_syncing()
xlog_state_do_callback()
<process shutdown on iclog that is now in SYNCING state>
The problem is that xlog_state_release_iclog() aborts before doing
anything if the log is already shut down. It assumes that the
callbacks have already been cleaned up, and it doesn't need to do
any cleanup.
Hence the fix is to remove the xlog_is_shutdown() check from
xlog_state_release_iclog() so that reference counts are correctly
released from the iclogs, and when the reference count is zero we
always transition to SYNCING if the log is shut down. Hence we'll
always enter the xlog_sync() path in a shutdown and eventually end
up erroring out the iclog IO and running xlog_state_do_callback() to
process the callbacks attached to the iclog.
This allows us to stop processing referenced ACTIVE/WANT_SYNC iclogs
directly in the shutdown code, and in doing so gets rid of the UAF
vector that currently exists. This then decouples the adding of
callbacks to the iclogs from xlog_state_release_iclog() as we
guarantee that xlog_state_release_iclog() will process the callbacks
if the log has been shut down before xlog_state_release_iclog() has
been called.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The iclog callback processing done during a forced log shutdown has
different logic to normal runtime IO completion callback processing.
Separate out the shutdown callbacks into their own function and call
that from the shutdown code instead.
We don't need this shutdown specific logic in the normal runtime
completion code - we'll always run the shutdown version on shutdown,
and it will do what shutdown needs regardless of whether there are
racing IO completion callbacks scheduled or in progress. Hence we
can also simplify the normal IO completion callpath and only abort
if shutdown occurred while we actively were processing callbacks.
Further, separating out the IO completion logic from the shutdown
logic avoids callback race conditions from being triggered by log IO
completion after a shutdown. IO completion will now only run
callbacks on iclogs that are in the correct state for a callback to
be run, avoiding the possibility of running callbacks on a
referenced iclog that hasn't yet been submitted for IO.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Clean it up a bit by factoring and rearranging some of the code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The running of a forced shutdown is a bit of a mess. It does racy
checks for XFS_MOUNT_SHUTDOWN in xfs_do_force_shutdown(), then
does more racy checks in xfs_log_force_unmount() before finally
setting XFS_MOUNT_SHUTDOWN and XLOG_IO_ERROR under the
log->icloglock.
Move the checking and setting of XFS_MOUNT_SHUTDOWN into
xfs_do_force_shutdown() so we only process a shutdown once and once
only. Serialise this with the mp->m_sb_lock spinlock so that the
state change is atomic and won't race. Move all the mount specific
shutdown state changes from xfs_log_force_unmount() to
xfs_do_force_shutdown() so they are done atomically with setting
XFS_MOUNT_SHUTDOWN.
Then get rid of the racy xlog_is_shutdown() check from
xlog_force_shutdown(), and gate the log shutdown on the
test_and_set_bit(XLOG_IO_ERROR) test under the icloglock. This
means that the log is shutdown once and once only, and code that
needs to prevent races with shutdown can do so by holding the
icloglock and checking the return value of xlog_is_shutdown().
This results in a predictable shutdown execution process - we set the
shutdown flags once and process the shutdown once rather than the
current "as many concurrent shutdowns as can race to the flag
setting" situation we have now.
Also, now that shutdown is atomic, alway emit a stack trace when the
error level for the filesystem is high enough. This means that we
always get a stack trace when trying to diagnose the cause of
shutdowns in the field, rather than just for SHUTDOWN_CORRUPT_INCORE
cases.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
log->l_flags doesn't actually contain "flags" as such, it contains
operational state information that can change at runtime. For the
shutdown state, this at least should be an atomic bit because
it is read without holding locks in many places and so using atomic
bitops for the state field modifications makes sense.
This allows us to use things like test_and_set_bit() on state
changes (e.g. setting XLOG_TAIL_WARN) to avoid races in setting the
state when we aren't holding locks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_log_mount_finish() needs to know if recovery is needed or not to
make decisions on whether to flush the log and AIL. Move the
handling of the NEED_RECOVERY state out to this function rather than
needing a temporary variable to store this state over the call to
xlog_recover_finish().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We don't need an iclog state field to tell us the log has been shut
down. We can just check the xlog_is_shutdown() instead. The avoids
the need to have shutdown overwrite the current iclog state while
being active used by the log code and so having to ensure that every
iclog state check handles XLOG_STATE_IOERROR appropriately.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Make it less shouty and a static inline before adding more calls
through the log code.
Also convert internal log code that uses XFS_FORCED_SHUTDOWN(mount)
to use xlog_is_shutdown(log) as well.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Now that the lightnvm driver is removed, we don't need a pointer to it's
now non-existent struct.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Transport drivers need both core and fabrics modules, instead of
selecting both, have the selection transitive such that NVME_FABRICS
selects NVME_CORE and transport drivers select NVME_FABRICS.
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The Altera EDAC driver has several features conditionally built
depending on Kconfig options. The edac_device_prv_data structures
are conditionally used in of_device_id tables. They reference other
functions and structures which can be defined as __maybe_unused.
Silence build warnings like:
drivers/edac/altera_edac.c:643:37: warning:
‘altr_edac_device_inject_fops’ defined but not used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20210601092704.203555-1-krzysztof.kozlowski@canonical.com
The "latency" tracers have some different requirements than normal
tracing, and also includes Daniel as a maintainer. Add a section in the
MAINTAINERS file to help direct patches and bug reports to these tracers
to the right people.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It is never read. Setting it and the request tag seems dodgy anyway.
Link: https://lore.kernel.org/r/1628862553-179450-3-git-send-email-john.garry@huawei.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use scsi_cmd_to_rq(cmd)->tag instead.
Link: https://lore.kernel.org/r/1628862553-179450-2-git-send-email-john.garry@huawei.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>