Fixes in virtio,vhost,vdpa drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmEZ7l0PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpdoQH/ir3ycgBco4pgDlpo0EQzw1eqwuyT69L7fvE
hlEZOqYOE39WvRTbFZLdrk4RQsULuu4x1vBr9AZ/qV2kHIHUlIGkuNqXnJiihsZE
bHGzKV7XGuzwRFXzCEmzTCDo6SFICVpqN9sb+tKMEsb/qiANi22OuDuDqffHldOH
wYmw6BaHPdj+w1+w6PYW8R/M0A9yaI7HngfBxt9OiVCYXNK2QQDiUWOsAaxmshSt
wsTDSwz4T6rRn/chztWC4JxlpossWJ7zywJexPKW02PSBqOV+z6irPkr7Ku3MhJ7
T2OjLzSSub1R+ikuQikZWKY67mvr45fnWFglUsPtO7H4f6biDeA=
=06n4
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes in virtio, vhost, and vdpa drivers"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix queue type selection logic
vdpa/mlx5: Avoid destroying MR on empty iotlb
tools/virtio: fix build
virtio_ring: pull in spinlock header
vringh: pull in spinlock header
virtio-blk: Add validation for block size in config space
vringh: Use wiov->used to check for read/write desc order
virtio_vdpa: reject invalid vq indices
vdpa: Add documentation for vdpa_alloc_device() macro
vDPA/ifcvf: Fix return value check for vdpa_alloc_device()
vp_vdpa: Fix return value check for vdpa_alloc_device()
vdpa_sim: Fix return value check for vdpa_alloc_device()
vhost: Fix the calculation in vhost_overflow()
vhost-vdpa: Fix integer overflow in vhost_vdpa_process_iotlb_update()
virtio_pci: Support surprise removal of virtio pci device
virtio: Protect vqs list access
virtio: Keep vring_del_virtqueue() mirror of VQ create
virtio: Improve vq->broken access to avoid any compiler optimization
For NOP command, need to cancel work scheduled on cmd_timer,
on receiving command status or commmand complete event.
Below use case might lead to race condition multiple when NOP
commands are queued sequentially:
hci_cmd_work() {
if (atomic_read(&hdev->cmd_cnt) {
.
.
.
atomic_dec(&hdev->cmd_cnt);
hci_send_frame(hdev,...);
schedule_delayed_work(&hdev->cmd_timer,...);
}
}
On receiving event for first NOP, the work scheduled on hdev->cmd_timer
is not cancelled and second NOP is dequeued and sent to controller.
While waiting for an event for second NOP command, work scheduled on
cmd_timer for the first NOP can get scheduled, resulting in sending third
NOP command (sending back to back NOP commands). This might
cause issues at controller side (like memory overrun, controller going
unresponsive) resulting in hci tx timeouts, hardware errors etc.
The fix to this issue is to cancel the delayed work scheduled on
cmd_timer on receiving command status or command complete event for
NOP command (this patch handles NOP command same as any other SIG
command).
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Acked-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Bluetooth on the BCM43752 needs a patchram file to function correctly.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
SMB347 can supply power to USB VBUS, implement the USB VBUS regulator.
USB VBUS needs to be powered for switching OTG-cable USB port into host
mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Pin control needs to be activated by setting the enable bit, otherwise
hardware rejects all pin changes. Previously this stayed unnoticed on
Nexus 7 because pin control was enabled by default after rebooting from
downstream kernel, which uses driver that enables the bit and charger
registers are non-volatile until power supply (battery) is disconnected.
Configure the pin control enable bit. This fixes the potentially
never-enabled charging on devices that use pin control.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Utilize generic regmap caching in order to avoid unnecessary slow I2C
accesses to all constant registers each time the supply status updated
and remove local caching of charger state to make code cleaner.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The smb347_set_writable() is used by interrupt handler and outside of it.
The interrupt should be disabled when the function is used outside of
interrupt handler in order to prevent racing with the interrupt context.
Add new parameter to smb347_set_writable() that allows to disable IRQ.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
SMB347 can supply power to USB VBUS, which is required by OTG-cable
devices that want to switch USB port into the host mode. Add USB VBUS
regulator properties.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This stores the advertising handle/instance into hci_conn so it is
accessible when re-enabling the advertising once disconnected.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
LE Enhanced Connection Complete contains the Local RPA used in the
connection which must be used when set otherwise there could problems
when pairing since the address used by the remote stack could be the
Local RPA:
BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 4, Part E
page 2396
'Resolvable Private Address being used by the local device for this
connection. This is only valid when the Own_Address_Type (from the
HCI_LE_Create_Connection, HCI_LE_Set_Advertising_Parameters,
HCI_LE_Set_Extended_Advertising_Parameters, or
HCI_LE_Extended_Create_Connection commands) is set to 0x02 or
0x03, and the Controller generated a resolvable private address for the
local device using a non-zero local IRK. For other Own_Address_Type
values, the Controller shall return all zeros.'
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Commit 0ea9fd001a ("Bluetooth: Shutdown controller after workqueues
are flushed or cancelled") introduced a regression that makes mtkbtsdio
driver stops working:
[ 36.593956] Bluetooth: hci0: Firmware already downloaded
[ 46.814613] Bluetooth: hci0: Execution of wmt command timed out
[ 46.814619] Bluetooth: hci0: Failed to send wmt func ctrl (-110)
The shutdown callback depends on the result of hdev->rx_work, so we
should call it before flushing rx_work:
-> btmtksdio_shutdown()
-> mtk_hci_wmt_sync()
-> __hci_cmd_send()
-> wait for BTMTKSDIO_TX_WAIT_VND_EVT gets cleared
-> btmtksdio_recv_event()
-> hci_recv_frame()
-> queue_work(hdev->workqueue, &hdev->rx_work)
-> clears BTMTKSDIO_TX_WAIT_VND_EVT
So move the shutdown callback before flushing TX/RX queue to resolve the
issue.
Reported-and-tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Fixes: 0ea9fd001a ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Fix function name in tracepoint.c kernel-doc comment
to remove a warning found by clang_w1.
kernel/tracepoint.c:589: warning: expecting prototype for register_tracepoint_notifier(). Prototype was for register_tracepoint_module_notifier() instead
kernel/tracepoint.c:613: warning: expecting prototype for unregister_tracepoint_notifier(). Prototype was for unregister_tracepoint_module_notifier() instead
Link: https://lkml.kernel.org/r/20210816052430.16539-1-zhaoxiao@uniontech.com
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Update ktest example for the boot-time tracing with histogram
options. Note that since the histogram option uses "trace()" action
instead of "EVENT()", this updates the matching pattern too.
Link: https://lkml.kernel.org/r/162856130208.203126.4458319094852152589.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add group or all event enabling syntax support to bconf2ftrace.sh.
User can pass a bootconfig file which includes
ftrace[.instance.INSTANCE].event.enable
and
ftrace[.instance.INSTANCE].event.GROUP.enable
correctly.
Link: https://lkml.kernel.org/r/162856127850.203126.16694505101982548237.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add the documentation about histogram syntax in boot-time tracing.
This will allow user to write the histogram setting in a structured
parameters.
Link: https://lkml.kernel.org/r/162856127129.203126.15551542847575916525.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since trigger_process_regex() modifies given trigger actions
while parsing, the error message couldn't show what command
was passed to the trigger_process_regex() when it returns
an error.
To fix that, show the backed up trigger action command
instead of parsed buffer.
Link: https://lkml.kernel.org/r/162856126413.203126.9465564928450701424.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add multiple histograms support for each event. This allows
user to set multiple histograms to an event.
ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist[.N] {
...
}
The 'N' is a digit started string and it can be omitted
for the default histogram.
For example, multiple hist triggers example in the
Documentation/trace/histogram.rst can be written as below;
ftrace.event.net.netif_receive_skb.hist {
1 {
keys = skbaddr.hex
values = len
filter = len < 0
}
2 {
keys = skbaddr.hex
values = len
filter = len > 4096
}
3 {
keys = skbaddr.hex
values = len
filter = len == 256
}
4 {
keys = skbaddr.hex
values = len
}
5 {
keys = len
values = common_preempt_count
}
}
Link: https://lkml.kernel.org/r/162856125628.203126.15846930277378572120.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Support multiple handlers for per-event histogram in boot-time tracing.
Since the histogram can register multiple same handler-actions with
different parameters, this expands the syntax to support such cases.
With this update, the 'onmax', 'onchange' and 'onmatch' handler subkeys
under per-event histogram option will take a number subkeys optionally
as below. (see [.N])
ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist {
onmax|onchange[.N] { var = <VAR>; <ACTION> [= <PARAM>] }
onmatch[.N] { event = <EVENT>; <ACTION> [= <PARAM>] }
}
The 'N' must be a digit (or digit started word).
Thus user can add several handler-actions to the histogram,
for example,
ftrace.event.SOMEGROUP.SOMEEVENT.hist {
keys = SOME_ID; lat = common_timestamp.usecs-$ts0
onmatch.1 {
event = GROUP1.STARTEVENT1
trace = latency_event, SOME_ID, $lat
}
onmatch.2 {
event = GROUP2.STARTEVENT2
trace = latency_event, SOME_ID, $lat
}
}
Then, it can trace the elapsed time from GROUP1.STARTEVENT1 to
SOMEGROUP.SOMEEVENT, and from GROUP2.STARTEVENT2 to
SOMEGROUP.SOMEEVENT with SOME_ID key.
Link: https://lkml.kernel.org/r/162856124905.203126.14913731908137885922.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a hist-trigger action syntax support to boot-time tracing.
Currently, boot-time tracing supports per-event actions as option
strings. However, for the histogram action, it has a special syntax
and usually needs a long action definition.
To make it readable and fit to the bootconfig syntax, this introduces
a new options for histogram.
Here are the histogram action options for boot-time tracing.
ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist {
keys = <KEY>[,...]
values = <VAL>[,...]
sort = <SORT-KEY>[,...]
size = <ENTRIES>
name = <HISTNAME>
var { <VAR> = <EXPR> ... }
pause|continue|clear
onmax|onchange { var = <VAR>; <ACTION> [= <PARAM>] }
onmatch { event = <EVENT>; <ACTION> [= <PARAM>] }
filter = <FILTER>
}
Where <ACTION> is one of below;
trace = <EVENT>, <ARG1>[, ...]
save = <ARG1>[, ...]
snapshot
Link: https://lkml.kernel.org/r/162856124106.203126.10501871028479029087.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The entire FTRACE block is surrounded by 'if TRACING_SUPPORT' ...
'endif'.
Using 'depends on' is a simpler way to guard FTRACE.
Link: https://lkml.kernel.org/r/20210731052233.4703-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Allow common_pid.execname to be saved in a variable in one histogram to be
passed to another histogram that can pass it as a parameter to a synthetic
event.
># echo 'hist:keys=pid:__arg__1=common_timestamp.usecs:arg2=common_pid.execname' \
> events/sched/sched_waking/trigger
># echo 'wakeup_lat s32 pid; u64 delta; char wake_comm[]' > synthetic_events
># echo 'hist:keys=next_pid:pid=next_pid,delta=common_timestamp.usecs-$__arg__1,exec=$arg2'\
':onmatch(sched.sched_waking).trace(wakeup_lat,$pid,$delta,$exec)' \
> events/sched/sched_switch/trigger
The above is a wake up latency synthetic event setup that passes the execname
of the common_pid that woke the task to the scheduling of that task, which
triggers a synthetic event that passes the original execname as a
parameter to display it.
># echo 1 > events/synthetic/enable
># cat trace
<idle>-0 [006] d..4 186.863801: wakeup_lat: pid=1306 delta=65 wake_comm=kworker/u16:3
<idle>-0 [000] d..4 186.863858: wakeup_lat: pid=163 delta=27 wake_comm=<idle>
<idle>-0 [001] d..4 186.863903: wakeup_lat: pid=1307 delta=36 wake_comm=kworker/u16:4
<idle>-0 [000] d..4 186.863927: wakeup_lat: pid=163 delta=5 wake_comm=<idle>
<idle>-0 [006] d..4 186.863957: wakeup_lat: pid=1306 delta=24 wake_comm=kworker/u16:3
sshd-1306 [006] d..4 186.864051: wakeup_lat: pid=61 delta=62 wake_comm=<idle>
<idle>-0 [000] d..4 186.965030: wakeup_lat: pid=609 delta=18 wake_comm=<idle>
<idle>-0 [006] d..4 186.987582: wakeup_lat: pid=1306 delta=65 wake_comm=kworker/u16:3
<idle>-0 [000] d..4 186.987639: wakeup_lat: pid=163 delta=27 wake_comm=<idle>
Link: https://lkml.kernel.org/r/20210722142837.458596338@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of kstrdup("const", GFP_KERNEL), have the hist_field type simply
assign the constant hist_field->type = "const"; And when the value passed
to it is a variable, use "kstrdup_const(var, GFP_KERNEL);" which will just
copy the value if the variable is already a constant. This saves on having
to allocate when not needed.
All frees of the hist_field->type will need to use kfree_const().
Link: https://lkml.kernel.org/r/20210722142837.280718447@goodmis.org
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Update both the tracefs README file as well as the histogram.rst to
include an explanation of what the buckets modifier is and how to use it.
Include an example with the wakeup_latency example for both log2 and the
buckets modifiers as there was no existing log2 example.
Link: https://lkml.kernel.org/r/20210707213922.167218794@goodmis.org
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's been several times I wished the histogram logic had a "grouping"
feature for the buckets. Currently, each bucket has a size of one. That
is, if you trace the amount of requested allocations, each allocation is
its own bucket, even if you are interested in what allocates 100 bytes or
less, 100 to 200, 200 to 300, etc.
Also, without grouping, it fills up the allocated histogram buckets
quickly. If you are tracking latency, and don't care if something is 200
microseconds off, or 201 microseconds off, but want to track them by say
10 microseconds each. This can not currently be done.
There is a log2 but that grouping get's too big too fast for a lot of
cases.
Introduce a "buckets=SIZE" command to each field where it will record in a
rounded number. For example:
># echo 'hist:keys=bytes_req.buckets=100:sort=bytes_req' > events/kmem/kmalloc/trigger
># cat events/kmem/kmalloc/hist
# event histogram
#
# trigger info:
hist:keys=bytes_req.buckets=100:vals=hitcount:sort=bytes_req.buckets=100:size=2048
[active]
#
{ bytes_req: ~ 0-99 } hitcount: 3149
{ bytes_req: ~ 100-199 } hitcount: 1468
{ bytes_req: ~ 200-299 } hitcount: 39
{ bytes_req: ~ 300-399 } hitcount: 306
{ bytes_req: ~ 400-499 } hitcount: 364
{ bytes_req: ~ 500-599 } hitcount: 32
{ bytes_req: ~ 600-699 } hitcount: 69
{ bytes_req: ~ 700-799 } hitcount: 37
{ bytes_req: ~ 1200-1299 } hitcount: 16
{ bytes_req: ~ 1400-1499 } hitcount: 30
{ bytes_req: ~ 2000-2099 } hitcount: 6
{ bytes_req: ~ 4000-4099 } hitcount: 2168
{ bytes_req: ~ 5000-5099 } hitcount: 6
Totals:
Hits: 7690
Entries: 13
Dropped: 0
Link: https://lkml.kernel.org/r/20210707213921.980359719@goodmis.org
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes a build error when CONFIG_HIST_TRIGGERS=n with boot-time
tracing. Since the trigger_process_regex() is defined only
when CONFIG_HIST_TRIGGERS=y, if it is disabled, the 'actions'
event option also must be disabled.
Link: https://lkml.kernel.org/r/162856123376.203126.582144262622247352.stgit@devnote2
Fixes: 81a59555ff ("tracing/boot: Add per-event settings")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix following sparse warning:
sound/soc/sh/rz-ssi.c:156:15: sparse: warning: dereference of
noderef expression
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210816132049.28128-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ipx.h header files are being removed from the kernel, and support
for them was long removed from the tree, so remove all references to it
in the r8188eu driver as well, to allow it to continue to build properly
in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210816073450.668993-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The compiler is free to ignore, or follow, "inline" markings so they
really have no use in .c files, so just remove them.
This allows functions to properly show up as being unused when all
callers to them are removed, otherwise gcc does not warn you about this.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210816073450.668993-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the system PRMT table is not present, dmesg output:
$ dmesg | grep PRM
[ 1.532237] ACPI: PRMT not present
[ 1.532237] PRM: found 4294967277 modules
The result of acpi_table_parse_entries need to be checked and return
immediately if PRMT table is not present or no PRM module found.
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The event filters are not applied on all of the output, which results in
the flood of printk when using tp_printk. Unfolding
event_trigger_unlock_commit_regs() into trace_event_buffer_commit(), so
the filters can be applied on every output.
Link: https://lkml.kernel.org/r/20210814034538.8428-1-kernelfans@gmail.com
Cc: stable@vger.kernel.org
Fixes: 0daa230296 ("tracing: Add tp_printk cmdline to have tracepoints go to printk()")
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Version 20210730.
ACPICA commit 2195f614e79442beb4d24d7a29a6347493e444e5
Link: 2195f614
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5acc6818c537888be147d9da6b280a0b8c241a1d
Link: 5acc6818
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Handle the case where the Command-line Arguments table field
does not exist.
ACPICA commit d6487164497fda170a1b1453c5d58f2be7c873d6
Link: d6487164
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Microsoft Debug Port Table 2 (DBG2) specification revision
September 21, 2020 comprises additional Serial Port Subtypes [1].
Reflect that in the actbl1.h header file.
[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table
ACPICA commit d95c7d206b5836c7770e8e9cd613859887fded8f
Link: d95c7d20
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8d49c0b2b78b8a8c5dae4d5ff28432729f4d59f2
Link: 8d49c0b2
Signed-off-by: Huilong Deng <denghuilong@cdjrlc.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 4dbe4b9a0c203b04918705f022e0db997aa55696
Link: 4dbe4b9a
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Includes support in the table compiler and the disassembler.
ACPICA commit e75074d84d1207339a048486c2d06ecb935d0092
Link: e75074d8
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull operating performance points (OPP) framework fixes for v5.14
from iresh Kumar:
"This removes few WARN() statements from the OPP core."
* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Drop empty-table checks from _put functions
opp: remove WARN when no valid OPPs remain
When the link is in L1, hardware should return it to L0
automatically whenever a transaction targets a component on the
other end of the link (PCIe r5.0, sec 5.2).
The R-Car PCIe controller doesn't handle this transition correctly.
If the link is not in L0, an MMIO transaction targeting a downstream
device fails, and the controller reports an ARM imprecise external
abort.
Work around this by hooking the abort handler so the driver can
detect this situation and help the hardware complete the link state
transition.
When the R-Car controller receives a PM_ENTER_L1 DLLP from the
downstream component, it sets PMEL1RX bit in PMSR register, but then
the controller enters some sort of in-between state. A subsequent
MMIO transaction will fail, resulting in the external abort. The
abort handler detects this condition and completes the link state
transition by setting the L1IATN bit in PMCTLR and waiting for the
link state transition to complete.
Link: https://lore.kernel.org/r/20210815181650.132579-1-marek.vasut@gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: linux-renesas-soc@vger.kernel.org
If L1 disables VMLOAD/VMSAVE intercepts, and doesn't enable
Virtual VMLOAD/VMSAVE (currently not supported for the nested hypervisor),
then VMLOAD/VMSAVE must operate on the L1 physical memory, which is only
possible by making L0 intercept these instructions.
Failure to do so allowed the nested guest to run VMLOAD/VMSAVE unintercepted,
and thus read/write portions of the host physical memory.
Fixes: 89c8a4984f ("KVM: SVM: Enable Virtual VMLOAD VMSAVE feature")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Invert the mask of bits that we pick from L2 in
nested_vmcb02_prepare_control
* Invert and explicitly use VIRQ related bits bitmask in svm_clear_vintr
This fixes a security issue that allowed a malicious L1 to run L2 with
AVIC enabled, which allowed the L2 to exploit the uninitialized and enabled
AVIC to read/write the host physical memory at some offsets.
Fixes: 3d6368ef58 ("KVM: SVM: Add VMRUN handler")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes an accidental partial revert of commit 94dfec48fc
("drm/imx: Add 8 pixel alignment fix") during a rebase of
commit fc1e985b67 ("drm/imx: ipuv3-plane: add color encoding and range
properties").
Fixes: fc1e985b67 ("drm/imx: ipuv3-plane: add color encoding and range properties")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20210816131728.30987-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Video captured in 1400x1050 resolution (bytesperline aka stride = 1408
bytes) is invalid. Fix it.
Signed-off-by: Krzysztof Halasa <khalasa@piap.pl>
Link: https://lore.kernel.org/r/m3y2bmq7a4.fsf@t19.piap.pl
[p.zabel@pengutronix.de: added "gpu: ipu-v3:" prefix to commit description]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use a more user friendly netlink error message when a device can't be
enslaved because it has IFF_MASTER, by not referring directly to a
kernel internal flag.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>