Kernel functions referenced by .BTF_ids may be changed from global to static
and get inlined or get renamed/removed, and thus disappears from BTF.
This causes kernel build failure when resolve_btfids do id patch for symbols
in .BTF_ids in vmlinux. Update resolve_btfids to emit warning messages and
patch zero id for missing symbols instead of aborting kernel build process.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210727132532.2473636-2-hengqi.chen@gmail.com
This removes the old plaintext Gemini binding and replace it
with a YAML schema, adding some new boards in the process.
While we are at it, add the missing vendors to the vendor
prefix file.
Drop the overly deliberate description of subnodes and the big
example from the old document. Keep the elaborate description.
I noticed that "wiliboard" is not a real vendor, the vendor
is named "wiligear" so deprecated this and replaced with the
proper vendor.
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210723152356.1874088-1-linus.walleij@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
In the function bcm_enetsw_probe(), 'ret' will be assigned by
bcm_enet_change_mtu(), so 'ret = 0' make no sense.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA has gained the recent ability to deal gracefully with upper
interfaces it cannot offload, such as the bridge, bonding or team
drivers. When such uppers exist, the ports are still in standalone mode
as far as the hardware is concerned.
But when we deliver packets to the software bridge in order for that to
do the forwarding, there is an unpleasant surprise in that the bridge
will refuse to forward them. This is because we unconditionally set
skb->offload_fwd_mark = true, meaning that the bridge thinks the frames
were already forwarded in hardware by us.
Since dp->bridge_dev is populated only when there is hardware offload
for it, but not in the software fallback case, let's introduce a new
helper that can be called from the tagger data path which sets the
skb->offload_fwd_mark accordingly to zero when there is no hardware
offload for bridging. This lets the bridge forward packets back to other
interfaces of our switch, if needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an ipvlan device is created on a bond device, the link state
of the ipvlan device may be abnormal. This is because bonding device
allows to add physical network card device in the down state and so
NETDEV_CHANGE event will not be notified to other listeners, so ipvlan
has no chance to update its link status.
The following steps can cause such problems:
1) bond0 is down
2) ip link add link bond0 name ipvlan type ipvlan mode l2
3) echo +enp2s7 >/sys/class/net/bond0/bonding/slaves
4) ip link set bond0 up
After these steps, use ip link command, we found ipvlan has NO-CARRIER:
ipvlan@bond0: <NO-CARRIER, BROADCAST,MULTICAST,UP,M-DOWN> mtu ...>
We can deal with this problem like VLAN: Add handling of NETDEV_UP
events. If we receive NETDEV_UP event, we will update the link status
of the ipvlan.
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
currently, only 'ingress' and 'clsact ingress' qdiscs store the tc 'chain
id' in the skb extension. However, userspace programs (like ovs) are able
to setup egress rules, and datapath gets confused in case it doesn't find
the 'chain id' for a packet that's "recirculated" by tc.
Change tcf_classify() to have the same semantic as tcf_classify_ingress()
so that a single function can be called in ingress / egress, using the tc
ingress / egress block respectively.
Suggested-by: Alaa Hleilel <alaa@nvidia.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei says:
====================
dpaa2-switch: add mirroring support
This patch set adds per port and per VLAN mirroring in dpaa2-switch.
The first 4 patches are just cosmetic changes. We renamed the
dpaa2_switch_acl_tbl structure into dpaa2_switch_filter_block so that we
can reuse it for filters that do not use the ACL table and reorganized
the addition of trap, redirect and drop filters into a separate
function. All this just to make for a more streamlined addition of the
support for mirroring.
The next 4 patches are actually adding the advertised support. Mirroring
rules can be added in shared blocks, the driver will replicate the same
configuration on all the switch ports part of the same block.
The last patch documents the feature, presents its behavior and
limitations and gives a couple of examples.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the mirroring capabilities of the dpaa2-switch driver,
any restrictions that are imposed and some example commands.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When mirroring rules are added in shared filter blocks, the same
mirroring rule has to be configured on all the switch ports that are
part of the same block.
In case a switch port joins a shared block after mirroring filters have
been already added to it, then all the mirror rules should be offloaded
to the port. The reverse, removal of mirroring rules, has to be done at
block unbind.
For this purpose, the dpaa2_switch_block_offload_mirror() and
dpaa2_switch_block_unoffload_mirror() functions are added and called
upon binding and unbinding a switch port to/from a block.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using the infrastructure added in the previous patch, extend tc-flower
support with FLOW_ACTION_MIRRED based on VLAN.
Tested with:
tc qdisc add dev eth8 ingress_block 1 clsact
tc filter add block 1 ingress protocol 802.1q flower skip_sw \
vlan_id 100 action mirred egress mirror dev eth6
tc filter del block 1 ingress pref 49152
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for per port mirroring for the DPAA2 switch. We support
only single mirror port, therefore we allow mirroring rules only as long
as the destination port is always the same.
Unlike all the actions (drop, redirect, trap) already supported by the
dpaa2-switch driver, adding mirroring filters in shared blocks is not
achieved by a singular ACL entry added in a table shared by the ports.
This is why, when a new mirror filter is added in a block we have to got
through all the switch ports sharing it and configure the filter
individually on all.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the necessary MC API for setting up and configuring the mirroring
feature on the DPSW DPAA2 object.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the necessary steps to offload a filter by using the ACL table
in a separate function - dpaa2_switch_cls_matchall_replace_acl().
This is intended to help with the code readability when the mirroring
support is added.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the necessary steps to offload a filter by using the ACL table
in a separate function - dpaa2_switch_cls_flower_replace_acl().
This is intended to help with the code readability when the mirroring
support is added.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until now, shared filter blocks were implemented only by ACL tables
shared between ports. Going forward, when the mirroring support will be
added, this will not be true anymore.
Rename the dpaa2_switch_acl_tbl into dpaa2_switch_filter_block so that
we make it clear that the structure is used not only for filters that
use the ACL table but will be used for all the filters that are added in
a block.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until now, the dpaa2_switch_tc_parse_action() function was used for all
the supported tc actions since all of them were implemented by adding
ACL table entries. In the next commits, the dpaa2-switch driver will
gain mirroring support which is not using the same HW feature.
Make sure that we specify the ACL in the function name so that we make
it clear that it's only used for specific actions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Max10 BMC on the Silicom n5010 PAC is slightly different than the
existing BMCs, so use a dedicated feature revision detect it.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Turns out Hans de Goede completed the work I started last year trying to
improve Chinese-clone detection of CSR controller chips. Quirk after quirk
these Bluetooth dongles are more usable now.
Even after a few BlueZ regressions; these clones are so fickle that some
days they stop working altogether. Except on Windows, they work fine.
But this force-suspend initialization quirk seems to mostly do the trick,
after a lot of testing Bluetooth now seems to work *all* the time.
The only problem is that the solution ended up being masked under a very
stringent check; when there are probably hundreds of fake dongle
models out there that benefit from a good reset. Make it so.
Fixes: 81cac64ba2 ("Bluetooth: Deal with USB devices that are faking CSR vendor")
Fixes: cde1a8a992 ("Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers")
Fixes: d74e0ae7e0 ("Bluetooth: btusb: Fix detection of some fake CSR controllers with a bcdDevice val of 0x0134")
Fixes: 0671c06623 ("Bluetooth: btusb: Add workaround for remote-wakeup issues with Barrot 8041a02 fake CSR controllers")
Cc: stable@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
DFL device drivers have a common need for checking feature revision
information from the DFL header, as well as other common DFL information
like the already exposed feature id and type.
This patch exposes the feature revision information directly via the DFL
device data structure.
Since the DFL core code has already read the DFL header, this this patch
saves additional mmio reads from DFL device drivers too.
Acked-by: Wu Hao <hao.wu@intel.com>
Acked-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
The Intel TyphoonPeak, GarfieldPeak Bluetooth controllers
support the Microsoft vendor extension and they are using
0xFC1E for VsMsftOpCode.
Verified on a GarfieldPeak device through bluetoothctl show
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Michael Sun <michaelfsun@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The Qualcomm WCN6855 Bluetooth controller supports the Microsoft vendor
extension, enable them by setting VsMsftOpCode to 0xFD70.
Verified on a WCN6855 device through bluetoothctl show
Signed-off-by: Michael Sun <michaelfsun@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There is a spelling mistake in the Kconfig text. Fix it.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Allow to extend expression of sub nodes to optionally indicate bit
position. This extension is needed to distinguish between different bit
positions in the same address.
For example, there are two nvmem nodes starting with bit 4 and bit 0
at the same address 0x54. In this case, it can be expressed as follows.
trim@54,4 {
reg = <0x54 1>;
bits = <4 2>;
};
trim@54,0 {
reg = <0x54 1>;
bits = <0 4>;
};
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1626661864-15473-2-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
There's an undocumented dependency between LCD layer enable bits [2-5]
and the AXI pipelined read enable bit [28] in the LCD_CONTROL register.
The proper order of operation is:
1) Clear AXI pipelined read enable bit
2) Set LCD layers
3) Set AXI pipelined read enable bit
With this update, LCD can start DMA when TVDDCV is reduced down to 700mV.
Fixes: 7f7b96a8a0 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728003126.1425028-1-anitha.chrisanthus@intel.com
Fix the following fallthrough warning (on ARM):
drivers/scsi/arm/fas216.c:1379:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
default:
^
drivers/scsi/arm/fas216.c:1379:2: note: insert 'break;' to avoid fall-through
default:
^
break;
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Fix the following fallthrough warning (on ARM):
drivers/scsi/arm/acornscsi.c:2651:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
case res_success:
^
drivers/scsi/arm/acornscsi.c:2651:2: note: insert '__attribute__((fallthrough));' to silence this warning
case res_success:
^
__attribute__((fallthrough));
drivers/scsi/arm/acornscsi.c:2651:2: note: insert 'break;' to avoid fall-through
case res_success:
^
break;
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
An I2S frame always has a left and right channel slot even if mono
data is being sent. So if channels==1 the actual bitclock frequency
is 2 * snd_soc_params_to_bclk(params).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2cdba9b045 ("ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called")
Link: https://lore.kernel.org/r/20210729170929.6589-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has no support for left-justified protocol so it should
not have been allowing this to be passed to cs42l42_set_dai_fmt().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2c394ca796 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20210729170929.6589-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ADC volume is a signed 8-bit number with range -97 to +12,
with -97 being mute. Use a SOC_SINGLE_S8_TLV() to define this
and fix the DECLARE_TLV_DB_SCALE() to have the correct start and
mute flag.
Fixes: 2c394ca796 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210729170929.6589-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Gpiolib core code has been updated to support setting friendly names
through properly 'gpio-line-names'. Instead of redefine behaviour here
to skip the core to be executed, just properly assign the desired offset
per bank to get in the core the expected behaviour.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This driver uses multiple gpiochip banks per device. To support
'gpio-line-names' along the banks 'offset' for each bank must be
set explicitly.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The default gpiolib-of implementation does not work with the multiple
gpiochip banks per device structure used for example by the gpio-mt7621
and gpio-brcmstb drivers. To fix these kind of situations driver code
is forced to fill the names to avoid the gpiolib code to set names
repeated along the banks. Instead of continue with that antipattern
fix the gpiolib core function to get expected behaviour for every
single situation adding a field 'offset' in the gpiochip structure.
Doing in this way, we can assume this offset will be zero for normal
driver code where only one gpiochip bank per device is used but
can be set explicitly in those drivers that really need more than
one gpiochip.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
In error handling branch "if (WARN_ON(node == NUMA_NO_NODE))", the
previously allocated memories are not released. Doing this before
allocating memory eliminates memory leaks.
tj: Note that the condition only occurs when the arch code is pretty broken
and the WARN_ON might as well be BUG_ON().
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
CNL is the only platform with GRAPHICS_VER == 10. With its removal we
don't need to handle that version anymore.
Also we can now reduce the max number of slices: the call to
intel_sseu_set_info() with the highest number of slices comes from SKL
and BDW with 3 slices. Recent platforms actually increase the
number of subslices so the number of slices remain 1.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728220326.1578242-3-lucas.demarchi@intel.com
Source needs to write DPCD 103-106 after receiving a PHY request to change
swing/pre-emphasis after reading DPCD 206-207. This is especially needed if
there is a retimer between source and sink and the retimer implements AUX_CH
interception scheme to manage DP PHY settings (e.g. adjusting Swing/Pre-emphasis
equalization level) for DP output channel. If the source doesn't write to
DPCD 103-106, the retimer may not output the requested swing/pre-emphasis and
eventually we fail compliance.
v2: Rebase and use crtc->lane_count (Imre)
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226081554.984307-1-khaled.almahallawy@intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
- Fix MTE shared page detection
- Enable selftest's use of PMU registers when asked to
s390:
- restore 5.13 debugfs names
x86:
- fix sizes for vcpu-id indexed arrays
- fixes for AMD virtualized LAPIC (AVIC)
- other small bugfixes
Generic:
- access tracking performance test
- dirty_log_perf_test command line parsing fix
- Fix selftest use of obsolete pthread_yield() in favour of sched_yield()
- use cpu_relax when halt polling
- fixed missing KVM_CLEAR_DIRTY_LOG compat ioctl
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmECvOwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMjuAf/ZdJx7RKRQxMHG4jHGDtOIQq3qxds
2uJsFZS3MWkphSOJ+mbomdXTOCHvhPbJlr5TXaSxGnasmAAl+mDk2qVT0tH6638m
r6M+fu4X0RYvFz54Qnf96V0/elE6ee8rtteXD8WVKQ/XzE3odk1EOqbe7CBDx7yo
A3SzO8eSBzxamKo22fmE3MR5LVVAcN9wNsCb88XGDTUkTbYl+w597r6zg83rMMlL
gwD4f9+NYX6h88BVVwLUkWotUrD/5rRGpRVVEZk5eZKvFGzpukk15dfv0PA9347O
AOM0i/PgnA+Qw6ZsTetWPjD8eFcXDBurGF1tIkyo4X8VogQG0wFIHxbezQ==
=ZgK/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix MTE shared page detection
- Enable selftest's use of PMU registers when asked to
s390:
- restore 5.13 debugfs names
x86:
- fix sizes for vcpu-id indexed arrays
- fixes for AMD virtualized LAPIC (AVIC)
- other small bugfixes
Generic:
- access tracking performance test
- dirty_log_perf_test command line parsing fix
- Fix selftest use of obsolete pthread_yield() in favour of
sched_yield()
- use cpu_relax when halt polling
- fixed missing KVM_CLEAR_DIRTY_LOG compat ioctl"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: add missing compat KVM_CLEAR_DIRTY_LOG
KVM: use cpu_relax when halt polling
KVM: SVM: use vmcb01 in svm_refresh_apicv_exec_ctrl
KVM: SVM: tweak warning about enabled AVIC on nested entry
KVM: SVM: svm_set_vintr don't warn if AVIC is active but is about to be deactivated
KVM: s390: restore old debugfs names
KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized
KVM: selftests: Introduce access_tracking_perf_test
KVM: selftests: Fix missing break in dirty_log_perf_test arg parsing
x86/kvm: fix vcpu-id indexed array sizes
KVM: x86: Check the right feature bit for MSR_KVM_ASYNC_PF_ACK access
docs: virt: kvm: api.rst: replace some characters
KVM: Documentation: Fix KVM_CAP_ENFORCE_PV_FEATURE_CPUID name
KVM: nSVM: Swap the parameter order for svm_copy_vmrun_state()/svm_copy_vmloadsave_state()
KVM: nSVM: Rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state()
KVM: arm64: selftests: get-reg-list: actually enable pmu regs in pmu sublist
KVM: selftests: change pthread_yield to sched_yield
KVM: arm64: Fix detection of shared VMAs on guest fault
When enabling KVM_CAP_ARM_MTE the ioctl checks that there are no VCPUs
created to ensure that the capability is enabled before the VM is
running. However no locks are held at that point so it is
(theoretically) possible for another thread in the VMM to create VCPUs
between the check and actually setting mte_enabled. Close the race by
taking kvm->lock.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Fixes: 673638f434 ("KVM: arm64: Expose KVM_ARM_CAP_MTE")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210729160036.20433-1-steven.price@arm.com
Hyp checks whether an address range only covers RAM by checking the
start/endpoints against a list of memblock_region structs. However,
the endpoint here is exclusive but internally is treated as inclusive.
Fix the off-by-one error that caused valid address ranges to be
rejected.
Cc: Quentin Perret <qperret@google.com>
Fixes: 90134ac9ca ("KVM: arm64: Protect the .hyp sections from the host")
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210728153232.1018911-2-dbrazdil@google.com
In verify_mpllb_state() encoder is retrieved from best_encoder
of connector_state. As there will be only one connector_state
for bigjoiner and checking encoder may not be needed for
bigjoiner-slave. This code path related to mpll is done on dg2
and need this fix to avoid null pointer dereference issue.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-30-matthew.d.roper@intel.com
The PSR enable/disable sequences now require that we program an extra
register in the PHY to adjust the lane disable power setting.
Bspec: 49274
Bspec: 53885
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-29-matthew.d.roper@intel.com
Initialization of the PHY is handled by the hardware/firmware, but the
driver should wait up to 25ms for the PHY to report that its calibration
has completed.
Bspec: 49189
Bspec: 50107
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-28-matthew.d.roper@intel.com