Commit graph

1,059,104 commits

Author SHA1 Message Date
Daniel Vetter
47514ac752 drm/i915: move request slabs to direct module init/exit
With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_requests|execute_cbs to just a
slab_requests|execute_cbs.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-7-daniel.vetter@ffwll.ch
2021-07-28 17:05:17 +02:00
Yaara Baruch
891332f697 iwlwifi: add new so-jf devices
Add new so-jf devices to the driver.

Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210719144523.1c9a59fd2760.If5aef1942007828210f0f2c4a17985f63050bb45@changeid
2021-07-28 18:01:38 +03:00
Yaara Baruch
a5bf1d4434 iwlwifi: add new SoF with JF devices
Add new SoF JF devices to the driver.

Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210719144523.0545d8964ff2.I3498879d8c184e42b1578a64aa7b7c99a18b75fb@changeid
2021-07-28 18:01:37 +03:00
Johannes Berg
0f673c16c8 iwlwifi: pnvm: accept multiple HW-type TLVs
Some products (So) may have two different types of products
with different mac-type that are otherwise equivalent, and
have the same PNVM data, so the PNVM file will contain two
(or perhaps later more) HW-type TLVs. Accept the file and
use the data section that contains any matching entry.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210719140154.a6a86e903035.Ic0b1b75c45d386698859f251518e8a5144431938@changeid
2021-07-28 18:00:59 +03:00
Daniel Vetter
c8ad09affd drm/i915: move gem_objects slab to direct module init/exit
With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_objects to just a
slab_objects.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-6-daniel.vetter@ffwll.ch
2021-07-28 16:45:58 +02:00
Daniel Vetter
a6270d1d4c drm/i915: move gem_context slab to direct module init/exit
With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_luts to just a
slab_luts.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-5-daniel.vetter@ffwll.ch
2021-07-28 16:45:58 +02:00
Daniel Vetter
2dcec7d3fe drm/i915: move intel_context slab to direct module init/exit
With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_ce to just a
slab_ce.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-4-daniel.vetter@ffwll.ch
2021-07-28 16:45:58 +02:00
Daniel Vetter
a28beb344b drm/i915: move i915_buddy slab to direct module init/exit
With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_blocks to just a
slab_blocks.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-3-daniel.vetter@ffwll.ch
2021-07-28 16:45:58 +02:00
Daniel Vetter
512ba03e35 drm/i915: move i915_active slab to direct module init/exit
With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_cache to just a slab_cache.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-2-daniel.vetter@ffwll.ch
2021-07-28 16:45:57 +02:00
Daniel Vetter
6d5de32756 drm/i915: Check for nomodeset in i915_init() first
When modesetting (aka the full pci driver, which has nothing to do
with disable_display option, which just gives you the full pci driver
without the display driver) is disabled, we load nothing and do
nothing.

So move that check first, for a bit of orderliness. With Jason's
module init/exit table this now becomes trivial.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-1-daniel.vetter@ffwll.ch
2021-07-28 16:45:57 +02:00
Uwe Kleine-König
b2c943e527 nubus: Make struct nubus_driver::remove return void
The nubus core ignores the return value of the remove callback (in
nubus_device_remove()) and all implementers return 0 anyway.

So make it impossible for future drivers to return an unused error code
by changing the remove prototype to return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/20210727080840.3550927-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28 15:33:59 +02:00
Laurent Pinchart
6571a76af3 drm: rcar-du: lvds: Use dev_err_probe()
Simplify error handling by using the dev_err_probe() function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28 16:33:32 +03:00
Laurent Pinchart
9b54182ce2 drm: rcar-du: lvds: Don't set bridge driver_private field
The drm_bridge.driver_private field is set but never used. Don't set it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28 16:33:32 +03:00
Laurent Pinchart
c24110a8fd drm: rcar-du: Use drm_bridge_connector_init() helper
Use the drm_bridge_connector_init() helper to create a drm_connector for
each output, instead of relying on the bridge drivers doing so. Attach
the bridges with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to instruct
them not to create a connector.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28 16:33:29 +03:00
Laurent Pinchart
d0f44e0dac drm: rcar-du: dw-hdmi: Set output port number
Report the DT output port number in dw_hdmi_plat_data to connect to the
next bridge in the dw-hdmi driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28 16:33:18 +03:00
Laurent Pinchart
e9e056949c drm: rcar-du: lvds: Convert to DRM panel bridge helper
Replace the manual panel handling with usage of the DRM panel bridge
helper. This simplifies the driver, and brings support for
DRM_BRIDGE_ATTACH_NO_CONNECTOR as an added bonus.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28 16:33:17 +03:00
Laurent Pinchart
5bcc48395b drm: bridge: dw-hdmi: Attach to next bridge if available
On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings
require a video output port connected to an HDMI sink (most likely an
HDMI connector, in rare cases another bridges converting HDMI to another
protocol). For those platforms, retrieve the next bridge and attach it
from the dw-hdmi bridge attach handler.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28 16:33:13 +03:00
Laurent Pinchart
fb8d617f8f drm/bridge: Centralize error message when bridge attach fails
Being informed of a failure to attach a bridge is useful, and many
drivers prints an error message in that case. Move the message to
drm_bridge_attach() to avoid code duplication.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
2021-07-28 16:33:12 +03:00
Laurent Pinchart
5e7ef0b85c drm: rcar-du: Shutdown the display on remove
When the device is unbound from the driver (the DU being a platform
device, this occurs either when removing the DU module, or when
unbinding the device manually through sysfs), the display may be active.
Make sure it gets shut down.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28 16:33:10 +03:00
Laurent Pinchart
c29b6b0b12 drm: rcar-du: Don't put reference to drm_device in rcar_du_remove()
The reference to the drm_device that was acquired by
devm_drm_dev_alloc() is released automatically by the devres
infrastructure. It must not be released manually, as that causes a
reference underflow..

Fixes: ea6aae1518 ("drm: rcar-du: Embed drm_device in rcar_du_device")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28 16:33:07 +03:00
Laurent Pinchart
015f2ebb93 drm: rcar-du: Shutdown the display on system shutdown
When the system shuts down or warm reboots, the display may be active,
with the hardware accessing system memory. Upon reboot, the DDR will not
be accessible, which may cause issues.

Implement the platform_driver .shutdown() operation and shut down the
display to fix this.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28 16:33:06 +03:00
Colin Ian King
4b4e7a2a4c drm/bridge: make a const array static, makes object smaller
Don't populate the const array frs_limits on the stack but instead make
it static. Makes the object code smaller by 128 bytes:

Before:
   text    data     bss     dec     hex filename
  24845    7440      64   32349    7e5d ./drivers/gpu/drm/bridge/tc358768.o

After:
   text    data     bss     dec     hex filename
  24749    7408      64   32221    7ddd ./drivers/gpu/drm/bridge/tc358768.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2021-07-28 16:33:04 +03:00
Hao Xu
a890d01e4e io_uring: fix poll requests leaking second poll entries
For pure poll requests, it doesn't remove the second poll wait entry
when it's done, neither after vfs_poll() or in the poll completion
handler. We should remove the second poll wait entry.
And we use io_poll_remove_double() rather than io_poll_remove_waitqs()
since the latter has some redundant logic.

Fixes: 88e41cf928 ("io_uring: add multishot mode for IORING_OP_POLL_ADD")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210728030322.12307-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-28 07:24:57 -06:00
Jens Axboe
ef04688871 io_uring: don't block level reissue off completion path
Some setups, like SCSI, can throw spurious -EAGAIN off the softirq
completion path. Normally we expect this to happen inline as part
of submission, but apparently SCSI has a weird corner case where it
can happen as part of normal completions.

This should be solved by having the -EAGAIN bubble back up the stack
as part of submission, but previous attempts at this failed and we're
not just quite there yet. Instead we currently use REQ_F_REISSUE to
handle this case.

For now, catch it in io_rw_should_reissue() and prevent a reissue
from a bogus path.

Cc: stable@vger.kernel.org
Reported-by: Fabian Ebner <f.ebner@proxmox.com>
Tested-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-28 07:24:38 -06:00
Matt Roper
e43c5261a6 drm/i915/xehpsdv: Correct parameters for IS_XEHPSDV_GT_STEP()
During a rebase the parameters were partially renamed, but not
completely.  Since the subsequent patches that start using this macro
haven't landed on an upstream tree yet this didn't cause a build
failure.

Fixes: 086df54e20 ("drm/i915/xehpsdv: add initial XeHP SDV definitions")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-2-matthew.d.roper@intel.com
2021-07-28 06:21:31 -07:00
Randy Dunlap
7882c55ef6 filesystems/locking: fix Malformed table warning
Update the bottom border to be the same as the top border.

Documentation/filesystems/locking.rst:274: WARNING: Malformed table.
Bottom/header table border does not match top border.

Fixes: 730633f0b7 ("mm: Protect operations adding pages to page cache with invalidate_lock")
Link: https://lore.kernel.org/r/20210727232212.12510-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
2021-07-28 15:18:18 +02:00
Imre Deak
573d7ce4f6 drm/i915/adlp: Add workaround to disable CMTG clock gating
The driver doesn't depend atm on the common mode timing generator
functionality (it would be used for some power saving feature and panel
timing synchronization), however DMC will corrupt the CMTG registers
across DC5 entry/exit sequences unless the CMTG clock gating is
disabled. This in turn can lead to at least the DPLL0/1 configuration
getting stuck at their last state, which means we can't reprogram them
to a new config.

Add the corresponding Bspec workaround to prevent the above.

v2: Fix checkpatch errors. (CI, Jose)

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727134400.101290-1-imre.deak@intel.com
2021-07-28 16:05:36 +03:00
Wang Hai
89fb62fde3 sis900: Fix missing pci_disable_device() in probe and remove
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:43:49 +01:00
David S. Miller
63caca1e3e Merge branch 'fec-next'
Joakim Zhang says:

====================
net: fec: add support for i.MX8MQ and i.MX8QM

This patch set adds supports for i.MX8MQ and i.MX8QM, both of them extend new features.

ChangeLogs:
V1->V2:
	* rebase on schema binding, and update dts compatible string.
	* use generic ethernet controller property for MAC internal RGMII clock delay
	  rx-internal-delay-ps and tx-internal-delay-ps
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:39:03 +01:00
Joakim Zhang
987e1b96d0 arm64: dts: imx8qxp: add "fsl,imx8qm-fec" compatible string for FEC
Add "fsl,imx8qm-fec" compatible string for FEC to support new feature
(RGMII delayed clock).

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:38:53 +01:00
Joakim Zhang
a758dee8ac arm64: dts: imx8m: add "fsl,imx8mq-fec" compatible string for FEC
Add "fsl,imx8mq-fec" compatible string for FEC to support new feature
(IEEE 802.3az EEE standard).

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:38:53 +01:00
Fugang Duan
fc539459e9 net: fec: add MAC internal delayed clock feature support
i.MX8QM ENET IP version support timing specification that MAC
integrate clock delay in RGMII mode, the delayed TXC/RXC as an
alternative option to work well with various PHYs.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:38:53 +01:00
Fugang Duan
b82f8c3f14 net: fec: add eee mode tx lpi support
The i.MX8MQ ENET version support IEEE802.3az eee mode, add
eee mode tx lpi enable to support ethtool interface.

usage:
1. set sleep and wake timer to 5ms:
ethtool --set-eee eth0 eee on tx-lpi on tx-timer 5000
2. check the eee mode:
~# ethtool --show-eee eth0
EEE Settings for eth0:
        EEE status: enabled - active
        Tx LPI: 5000 (us)
        Supported EEE link modes:  100baseT/Full
                                   1000baseT/Full
        Advertised EEE link modes:  100baseT/Full
                                    1000baseT/Full
        Link partner advertised EEE link modes:  100baseT/Full

Note: For realtime case and IEEE1588 ptp case, it should disable
EEE mode.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:38:53 +01:00
Fugang Duan
947240ebcc net: fec: add imx8mq and imx8qm new versions support
The ENET of imx8mq and imx8qm are basically the same as imx6sx,
but they have new features support based on imx6sx, like:
- imx8mq: supports IEEE 802.3az EEE standard.
- imx8qm: supports RGMII mode delayed clock.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:38:53 +01:00
Joakim Zhang
df11b8073e dt-bindings: net: fsl,fec: add RGMII internal clock delay
Add RGMII internal clock delay for FEC controller.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:38:53 +01:00
Joakim Zhang
5d88694703 dt-bindings: net: fsl,fec: update compatible items
Add more compatible items for i.MX8/8M platforms.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:38:53 +01:00
Dave Jiang
125d10373a dmanegine: idxd: add software command status
Enabling device and wq returns standard errno and that does not provide
enough details to indicate what exactly failed. The hardware command status
is only 8bits. Expand the command status to 32bits and use the upper 16
bits to define software errors to provide more details on the exact
failure. Bit 31 will be used to indicate the error is software set as the
driver is using some of the spec defined hardware error as well.

Cc: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373579.1968485.5891788397526827892.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-28 17:56:55 +05:30
Dave Jiang
a9c171527a dmaengine: idxd: rotate portal address for better performance
The device submission portal is on a 4k page and any of those 64bit aligned
address on the page can be used for descriptor submission. By rotating the
offset through the 4k range and prevent successive writes to the same MMIO
address, performance improvement is observed through testing.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681372446.1968485.10634280461681015569.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-28 17:55:40 +05:30
Dave Jiang
673d812d30 dmaengine: idxd: fix wq slot allocation index check
The sbitmap wait and allocate routine checks the index that is returned
from sbitmap_queue_get(). It should be idxd >= 0 as 0 is also a valid
index. This fixes issue where submission path hangs when WQ size is 1.

Fixes: 0705107fcc ("dmaengine: idxd: move submission to sbitmap_queue")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162697645067.3478714.506720687816951762.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-28 17:55:40 +05:30
Dave Jiang
568b212646 dmaengine: idxd: fix uninit var for alt_drv
0-day detected uninitialized alt_drv variable in the bind_store() function.
The branch can be taken when device is not idxd device or wq 'struct
device'. Init alt_drv to NULL.

Fixes: 6e7f3ee97b ("dmaengine: idxd: move dsa_drv support to compatible mode")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162689250332.2114335.636367120454420852.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-28 17:55:40 +05:30
Dave Jiang
ade8a86b51 dmaengine: idxd: Set defaults for GRPCFG traffic class
Set GRPCFG traffic class to value of 1 for best performance on current
generation of accelerators. Also add override option to allow experimentation.
Sysfs knobs are disabled for DSA/IAX gen1 devices.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373005.1968485.3761065664382799202.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-28 17:55:40 +05:30
Peilin Ye
68f9884837 tc-testing: Add control-plane selftest for skbmod SKBMOD_F_ECN option
Recently we added a new option, SKBMOD_F_ECN, to tc-skbmod(8).  Add a
control-plane selftest for it.

Depends on kernel patch "net/sched: act_skbmod: Add SKBMOD_F_ECN option
support", as well as iproute2 patch "tc/skbmod: Introduce SKBMOD_F_ECN
option".

Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:19:32 +01:00
Peilin Ye
56af5e749f net/sched: act_skbmod: Add SKBMOD_F_ECN option support
Currently, when doing rate limiting using the tc-police(8) action, the
easiest way is to simply drop the packets which exceed or conform the
configured bandwidth limit.  Add a new option to tc-skbmod(8), so that
users may use the ECN [1] extension to explicitly inform the receiver
about the congestion instead of dropping packets "on the floor".

The 2 least significant bits of the Traffic Class field in IPv4 and IPv6
headers are used to represent different ECN states [2]:

	0b00: "Non ECN-Capable Transport", Non-ECT
	0b10: "ECN Capable Transport", ECT(0)
	0b01: "ECN Capable Transport", ECT(1)
	0b11: "Congestion Encountered", CE

As an example:

	$ tc filter add dev eth0 parent 1: protocol ip prio 10 \
		matchall action skbmod ecn

Doing the above marks all ECT(0) and ECT(1) packets as CE.  It does NOT
affect Non-ECT or non-IP packets.  In the tc-police scenario mentioned
above, users may pipe a tc-police action and a tc-skbmod "ecn" action
together to achieve ECN-based rate limiting.

For TCP connections, upon receiving a CE packet, the receiver will respond
with an ECE packet, asking the sender to reduce their congestion window.
However ECN also works with other L4 protocols e.g. DCCP and SCTP [2], and
our implementation does not touch or care about L4 headers.

The updated tc-skbmod SYNOPSIS looks like the following:

	tc ... action skbmod { set SETTABLE | swap SWAPPABLE | ecn } ...

Only one of "set", "swap" or "ecn" shall be used in a single tc-skbmod
command.  Trying to use more than one of them at a time is considered
undefined behavior; pipe multiple tc-skbmod commands together instead.
"set" and "swap" only affect Ethernet packets, while "ecn" only affects
IPv{4,6} packets.

It is also worth mentioning that, in theory, the same effect could be
achieved by piping a "police" action and a "bpf" action using the
bpf_skb_ecn_set_ce() helper, but this requires eBPF programming from the
user, thus impractical.

Depends on patch "net/sched: act_skbmod: Skip non-Ethernet packets".

[1] https://datatracker.ietf.org/doc/html/rfc3168
[2] https://en.wikipedia.org/wiki/Explicit_Congestion_Notification

Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 13:19:31 +01:00
Yang Yingliang
d80f6d6665 nfp: flower-ct: fix error return code in nfp_fl_ct_add_offload()
If nfp_tunnel_add_ipv6_off() fails, it should return error code
in nfp_fl_ct_add_offload().

Fixes: 5a2b930416 ("nfp: flower-ct: compile match sections of flow_payload")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 12:56:30 +01:00
zhang kai
1e60cebf82 net: let flow have same hash in two directions
using same source and destination ip/port for flow hash calculation
within the two directions.

Signed-off-by: zhang kai <zhangkaiheb@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28 12:54:06 +01:00
Clément Léger
258cb692b8 dmaengine: at_xdmac: use platform_driver_register
When using SCMI clocks, the clocks are probed later than subsys initcall
level. This driver uses platform_driver_probe which is not compatible with
deferred probing and won't be probed again later if probe function fails
due to clocks not being available at that time.

This patch replaces the use of platform_driver_probe with
platform_driver_register which will allow probing the driver later again
when clocks will be available.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20210728094607.50589-1-clement.leger@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-28 16:19:26 +05:30
Thomas Weißschuh
2b2c66f607 platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-879398883

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210726153630.65213-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-28 12:05:33 +02:00
Ping Bao
a59c7b6c6f platform/x86: intel-hid: add Alder Lake ACPI device ID
Alder Lake has a new ACPI ID for Intel HID event filter device.

Signed-off-by: Ping Bao <ping.a.bao@intel.com>
Link: https://lore.kernel.org/r/20210721225615.20575-1-ping.a.bao@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-28 12:05:33 +02:00
Vincent Lefevre
3b41fb4094 HID: apple: Add missing scan code event for keys handled by hid-apple
When an EV_KEY event is generated by hid-apple due to special key
mapping, the usual associated scan code event (EV_MSC) is missing.
This issue can be seen with the evtest utility.

Add the scan code event for these special keys.

BugLink: https://bugs.debian.org/757356
Co-developed-by: Daniel Lin <ephemient@gmail.com>
Signed-off-by: Daniel Lin <ephemient@gmail.com>
Signed-off-by: Vincent Lefevre <vincent@vinc17.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-07-28 11:53:50 +02:00
Thomas Weißschuh
bebf8820b3 HID: cmedia: add support for HS-100B mute button
These chips report mute button events in bit 4 of their report without it
being part of the report descriptor.
Use a custom descriptor that maps this bit.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-07-28 11:51:07 +02:00