Commit graph

1,059,104 commits

Author SHA1 Message Date
Linus Walleij
710fa9aa16 drm/panel: Fix up DT bindings for Samsung lms397kf04
Improve the bindings and make them more usable:

- Pick in spi-cpha and spi-cpol from the SPI node parent,
  this will specify that we are "type 3" in the device tree
  rather than hardcoding it in the operating system.
- Drop the u32 ref from the SPI frequency: comes in from
  the SPI host bindings.
- Make spi-cpha, spi-cpol and port compulsory.
- Update the example with a real-world SPI controller,
  spi-gpio.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701213618.3818821-1-linus.walleij@linaro.org
2021-07-09 17:31:40 +02:00
Thierry Reding
c667dcd4df arm64: tegra: Enable SMMU support for USB on Tegra194
As of commit c7289b1c8a ("arm64: tegra: Enable SMMU support on
Tegra194"), SMMU support is enabled system-wide on Tegra194. However,
there was a bit of overlap between the SMMU enablement and the USB
support addition, so the USB device tree nodes are missing the iommus
and interconnects properties. This in turn leads to SMMU faults for
these devices, since by default the ARM SMMU will fault.

Add the iommus and interconnects properties to the XUSB and XUDC device
tree nodes to restore their functionality.

Fixes: c7289b1c8a ("arm64: tegra: Enable SMMU support on Tegra194")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-07-09 16:50:44 +02:00
Thierry Reding
34e0fc345a arm64: tegra: Enable audio IOMMU support on Tegra194
Add iommus and interconnects properties to the sound device tree node on
Tegra194. This ensures that the correct SID is used for translation of
physical to I/O virtual addresses and that the path to system memory is
properly described, which in turn can impact the range of memory that
the device can address.

Fixes: c7289b1c8a ("arm64: tegra: Enable SMMU support on Tegra194")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-07-09 16:36:07 +02:00
Christoph Hellwig
ecef6a9eff libata: fix ata_pio_sector for CONFIG_HIGHMEM
Data transfers are not required to be block aligned in memory, so they
span two pages.  Fix this by splitting the call to >sff_data_xfer into
two for that case.

This has been broken since the initial libata import before the damn
of git, but was uncovered by the legacy ide driver removal.

Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210709130237.3730959-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-09 08:28:20 -06:00
Jens Axboe
9ce85ef2cb io_uring: remove dead non-zero 'poll' check
Colin reports that Coverity complains about checking for poll being
non-zero after having dereferenced it multiple times. This is a valid
complaint, and actually a leftover from back when this code was based
on the aio poll code.

Kill the redundant check.

Link: https://lore.kernel.org/io-uring/fe70c532-e2a7-3722-58a1-0fa4e5c5ff2c@canonical.com/
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-09 08:20:28 -06:00
Rajeev Nandan
4bfe6c8f7c drm/panel-simple: Add Samsung ATNA33XC20
Add Samsung 13.3" FHD eDP AMOLED panel.

Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-7-git-send-email-rajeevny@codeaurora.org
2021-07-09 06:48:34 -07:00
Rajeev Nandan
c20dec1935 dt-bindings: display: simple: Add Samsung ATNA33XC20
Add Samsung 13.3" FHD eDP AMOLED panel.

Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-6-git-send-email-rajeevny@codeaurora.org
2021-07-09 06:48:26 -07:00
Rajeev Nandan
13aceea56f drm/panel-simple: Update validation warnings for eDP panel description
Do not give a warning for the eDP panels if the "bus_format" is
not specified, since most eDP panels can support more than one
bus formats and this can be auto-detected.
Also, update the check to include bpc=10 for the eDP panel.

Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-5-git-send-email-rajeevny@codeaurora.org
2021-07-09 06:48:17 -07:00
Rajeev Nandan
18a1488bf1 drm/panel-simple: Support for delays between GPIO & regulator
Some panels datasheets may specify a delay between the enable GPIO and
the regulator. Support this in panel-simple.

Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-4-git-send-email-rajeevny@codeaurora.org
2021-07-09 06:48:05 -07:00
Rajeev Nandan
bfd451403d drm/panel-simple: Support DP AUX backlight
If there is no backlight specified in the device tree and the panel
has access to the DP AUX channel then create a DP AUX backlight if
supported by the panel.

Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-3-git-send-email-rajeevny@codeaurora.org
2021-07-09 06:47:55 -07:00
Rajeev Nandan
10f7b40e4f drm/panel: add basic DP AUX backlight support
Some panels support backlight control over DP AUX channel using
VESA's standard backlight control interface.
Using new DRM eDP backlight helpers, add support to create and
register a backlight for those panels in drm_panel to simplify
the panel drivers.

The panel driver with access to "struct drm_dp_aux" can create and
register a backlight device using following code snippet in its
probe() function:

	err = drm_panel_dp_aux_backlight(panel, aux);
	if (err)
		return err;

Then drm_panel will handle backlight_(enable|disable) calls
similar to the case when drm_panel_of_backlight() is used.

Currently, we are not supporting one feature where the source
device can combine the backlight brightness levels set through
DP AUX and the BL_PWM_DIM eDP connector pin. Since it's not
required for the basic backlight controls, it can be added later.

Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[dianders: added blank line for warning when applying]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-2-git-send-email-rajeevny@codeaurora.org
2021-07-09 06:47:11 -07:00
Thomas Gleixner
4840048356 irqchip fixes for 5.14, take #1
- Fix a MIPS bug where irqdomain loopkups could occur in a context
   where RCU is not allowed
 
 - Fix a documentation bug for handle_domain_irq
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmDoFZwPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDkxgP/0IlcPoBfamLbzpjyrMm0359AIllKP7Vgpb6
 IaDnoiWTCe1B6rFoP59j357iGCTvB04+oJ17DsB51R9RKaM2sdhi2dKxbEHRd+se
 v1EyU5gmVB7JJP/1lPnjYdPGnXz73jjEq5MRI6o4yLG2xnQ+ZcdHifuP/tD7glGZ
 UmJkAWrq53IbBCja9HbtbAQanuDtDu6xgYIweaCdf2oKzNS9jQVvjqFokMd0AcIA
 juY8xTFNzHoA/8AF8eBUE5TfLVcG8j3P31ffw4gVvzEkman77AP5DZ8qkSvi7plH
 wOdjlBrsGTfoti4kfAIvsfi6zBHyXJEaW0Vd38uaA+cXYI1QNiZ9qqzQPvjuK9gs
 VFORcWe2pDiI1q4mg1pz7dGBy0FoEswe4uVnr6xm+vn98KeAn/gS5Dc/K1JpmfN+
 iOJt9H7hvDrUC/KnntzuRY82I8y7gDyyjGDJHhFlWgZBeONPhpOiE/d6xbxGtQm8
 SpVBD9QZnMBxDY2eVNQp31SCdrwLCLczNeQrJHP6Oh9LLmjQq3VD4M3OpBLpEA8e
 8WIiH9vJfXI5emU1wQRkscyA8tT2mAo3Kb192fpC5nDwTMSxbfk1l94oLGUldcV5
 liQ78yd/12mJBMS5MJPsA39g1ww2vv5m6Bq0JDwDu33l1qKrlRJqveeS8UjDSXrD
 s3cVrxFO
 =eTw3
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

 - Fix a MIPS bug where irqdomain loopkups could occur in a context
   where RCU is not allowed

 - Fix a documentation bug for handle_domain_irq
2021-07-09 15:35:13 +02:00
Martin Fäcknitz
47ce8527fb MIPS: vdso: Invalid GIC access through VDSO
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:

  void *get_gic(const struct vdso_data *data) {
    return (void __iomem *)data - PAGE_SIZE;
  }

However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:

  +--------------------+
  |                    |
  | vd[CS_RAW]         | ---+
  | vd[CS_HRES_COARSE] |    |
  +--------------------+    | -PAGE_SIZE
  |                    |    |
  |  GIC mapped page   | <--+
  |                    |
  +--------------------+

When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.

Fixes: a7f4df4e21 ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()")
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-07-09 15:29:06 +02:00
Christian König
3efe180d51 drm/qxl: add NULL check for bo->resource
When allocations fails that can be NULL now.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Tested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
Fixes: bfa3357ef9 ("drm/ttm: allocate resource object instead of embedding it v2")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708114710.8186-1-christian.koenig@amd.com
2021-07-09 12:43:13 +02:00
Christian König
60f800b2bd drm/msm: always wait for the exclusive fence
Drivers also need to to sync to the exclusive fence when
a shared one is present.

Completely untested since the driver won't even compile on !ARM.

Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702111642.17259-5-christian.koenig@amd.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-07-09 12:30:37 +02:00
John Fastabend
1fb5ba29ad bpf: Selftest to verify mixing bpf2bpf calls and tailcalls with insn patch
This adds some extra noise to the tailcall_bpf2bpf4 tests that will cause
verify to patch insns. This then moves around subprog start/end insn
index and poke descriptor insn index to ensure that verify and JIT will
continue to track these correctly.

If done correctly verifier should pass this program same as before and
JIT should emit tail call logic.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210707223848.14580-3-john.fastabend@gmail.com
2021-07-09 12:08:40 +02:00
John Fastabend
f263a81451 bpf: Track subprog poke descriptors correctly and fix use-after-free
Subprograms are calling map_poke_track(), but on program release there is no
hook to call map_poke_untrack(). However, on program release, the aux memory
(and poke descriptor table) is freed even though we still have a reference to
it in the element list of the map aux data. When we run map_poke_run(), we then
end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run():

  [...]
  [  402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e
  [  402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337
  [  402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G          I       5.12.0+ #399
  [  402.824715] Call Trace:
  [  402.824719]  dump_stack+0x93/0xc2
  [  402.824727]  print_address_description.constprop.0+0x1a/0x140
  [  402.824736]  ? prog_array_map_poke_run+0xc2/0x34e
  [  402.824740]  ? prog_array_map_poke_run+0xc2/0x34e
  [  402.824744]  kasan_report.cold+0x7c/0xd8
  [  402.824752]  ? prog_array_map_poke_run+0xc2/0x34e
  [  402.824757]  prog_array_map_poke_run+0xc2/0x34e
  [  402.824765]  bpf_fd_array_map_update_elem+0x124/0x1a0
  [...]

The elements concerned are walked as follows:

    for (i = 0; i < elem->aux->size_poke_tab; i++) {
           poke = &elem->aux->poke_tab[i];
    [...]

The access to size_poke_tab is a 4 byte read, verified by checking offsets
in the KASAN dump:

  [  402.825004] The buggy address belongs to the object at ffff8881905a7800
                 which belongs to the cache kmalloc-1k of size 1024
  [  402.825008] The buggy address is located 320 bytes inside of
                 1024-byte region [ffff8881905a7800, ffff8881905a7c00)

The pahole output of bpf_prog_aux:

  struct bpf_prog_aux {
    [...]
    /* --- cacheline 5 boundary (320 bytes) --- */
    u32                        size_poke_tab;        /*   320     4 */
    [...]

In general, subprograms do not necessarily manage their own data structures.
For example, BTF func_info and linfo are just pointers to the main program
structure. This allows reference counting and cleanup to be done on the latter
which simplifies their management a bit. The aux->poke_tab struct, however,
did not follow this logic. The initial proposed fix for this use-after-free
bug further embedded poke data tracking into the subprogram with proper
reference counting. However, Daniel and Alexei questioned why we were treating
these objects special; I agree, its unnecessary. The fix here removes the per
subprogram poke table allocation and map tracking and instead simply points
the aux->poke_tab pointer at the main programs poke table. This way, map
tracking is simplified to the main program and we do not need to manage them
per subprogram.

This also means, bpf_prog_free_deferred(), which unwinds the program reference
counting and kfrees objects, needs to ensure that we don't try to double free
the poke_tab when free'ing the subprog structures. This is easily solved by
NULL'ing the poke_tab pointer. The second detail is to ensure that per
subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do
this, we add a pointer in the poke structure to point at the subprogram value
so JITs can easily check while walking the poke_tab structure if the current
entry belongs to the current program. The aux pointer is stable and therefore
suitable for such comparison. On the jit_subprogs() error path, we omit
cleaning up the poke->aux field because these are only ever referenced from
the JIT side, but on error we will never make it to the JIT, so its fine to
leave them dangling. Removing these pointers would complicate the error path
for no reason. However, we do need to untrack all poke descriptors from the
main program as otherwise they could race with the freeing of JIT memory from
the subprograms. Lastly, a748c6975d ("bpf: propagate poke descriptors to
subprograms") had an off-by-one on the subprogram instruction index range
check as it was testing 'insn_idx >= subprog_start && insn_idx <= subprog_end'.
However, subprog_end is the next subprogram's start instruction.

Fixes: a748c6975d ("bpf: propagate poke descriptors to subprograms")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210707223848.14580-2-john.fastabend@gmail.com
2021-07-09 12:08:27 +02:00
Marc Zyngier
1fee9db9b4 irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
Since d4a45c68dc ("irqdomain: Protect the linear revmap with RCU"),
any irqdomain lookup requires the RCU read lock to be held.

This assumes that the architecture code will be structured such as
irq_enter() will be called *before* the interrupt is looked up
in the irq domain. However, this isn't the case for MIPS, and a number
of drivers are structured to do it the other way around when handling
an interrupt in their root irqchip (secondary irqchips are OK by
construction).

This results in a RCU splat on a lockdep-enabled kernel when the kernel
takes an interrupt from idle, as reported by Guenter Roeck.

Note that this could have fired previously if any driver had used
tree-based irqdomain, which always had the RCU requirement.

To solve this, provide a MIPS-specific helper (do_domain_IRQ())
as the pendent of do_IRQ() that will do thing in the right order
(and maybe save some cycles in the process).

Ideally, MIPS would be moved over to using handle_domain_irq(),
but that's much more ambitious.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
[maz: add dependency on CONFIG_IRQ_DOMAIN after report from the kernelci bot]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20210705172352.GA56304@roeck-us.net
Link: https://lore.kernel.org/r/20210706110647.3979002-1-maz@kernel.org
2021-07-09 10:18:58 +01:00
Matthew Auld
b3f450d9e1 drm/i915: use consistent CPU mappings for pin_map users
For discrete, users of pin_map() needs to obey the same rules at the TTM
backend, where we map system only objects as WB, and everything else as
WC. The simplest for now is to just force the correct mapping type as
per the new rules for discrete.

Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-1-matthew.auld@intel.com
2021-07-09 10:00:41 +01:00
Harshvardhan Jha
ea9a897b8a drm/gma500: Fix end of loop tests for list_for_each_entry
The list_for_each_entry() iterator, "connector" in this code, can never be
NULL.  If we exit the loop without finding the correct  connector then
"connector" points invalid memory that is an offset from the list head.
This will eventually lead to memory corruption and presumably a kernel
crash.

Fixes: 9bd81acdb6 ("gma500: Convert Oaktrail to work with new output handling")
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709073959.11443-1-harshvardhan.jha@oracle.com
2021-07-09 10:06:11 +02:00
Uma Shankar
edc2c4b956 drm/i915/display/xelpd: Fix incorrect color capability reporting
On XELPD platforms, color management support is not yet enabled.
Fix wrongly reporting the same through platform info, which was
resulting in incorrect initialization and usage.

Cc: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095253.23848-1-uma.shankar@intel.com
2021-07-09 11:11:24 +05:30
Florian Fainelli
2b452550a2 net: bcmgenet: Ensure all TX/RX queues DMAs are disabled
Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.

Tested-by: Maxime Ripard <maxime@cerno.tech>
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 19:35:59 -07:00
Ronnie Sahlberg
e0a3cbcd5c cifs: use helpers when parsing uid/gid mount options and validate them
Use the nice helpers to initialize and the uid/gid/cred_uid when passed as mount arguments.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-07-08 18:25:04 -05:00
Namjae Jeon
3867369ef8 ksmbd: change data type of volatile/persistent id to u64
This patch change data type of volatile/persistent id to u64 to make
issue from idr_find and idr_remove(). !HAS_FILE_ID check will protect
integer overflow issue from idr_find and idr_remove().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-07-09 08:23:16 +09:00
Zhan Liu
c5b53d1281 drm/amdgpu/display - only update eDP's backlight level when necessary
[Why]
The original logic is to update eDP's backlight level
on every amdgpu dm atomic commit, which causes excessive
DMUB write. As a result, when playing game or moving window
around, DMUB timeout and system lagging are observed.

[How]
We only need to update eDP's backlight level when current level
doesn't match requested level.

Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:28 -04:00
John Clements
186c8a8585 drm/amdgpu: initialize umc ras function
support umc ras function initialization for aldebaran

v2: squash in compile fix

Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:28 -04:00
Philip Yang
4818545a1d drm/amdkfd: handle fault counters on invalid address
prange is NULL if vm fault retry on invalid address, for this case, can
not use prange to get pdd, use adev to get gpuidx and then get pdd
instead, then increase pdd vm fault counter.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:28 -04:00
Emily Deng
9604b74bff drm/amdgpu: Correct the irq numbers for virtual crtc
The irq number should be decided by num_crtc, and the num_crtc could change
by parameter.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:28 -04:00
Xiaomeng Hou
6435af81ed drm/amd/display: update header file name
Update the register header file name.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:28 -04:00
Xiaomeng Hou
dde5864539 drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carp
Since there's nothing special in smu implementation for yellow carp,
it's better to reuse the common smu_v13_0 interfaces and drop the
specific smu_v13_0_1.c|h files.

v2: remove the duplicate register offset and shift mask header files as
well.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:28 -04:00
Evan Quan
a6556ed8ea drm/amd/pm: bump DRIVER_IF_VERSION for Sienna Cichlid
To suppress the annoying warning about version mismatch.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:28 -04:00
Evan Quan
be22e2b9f4 drm/amd/pm: update the gpu metrics data retrieving for Sienna Cichlid
Due to the structure layout change: "uint32_t ThrottlerStatus" -> "
uint8_t  ThrottlingPercentage[THROTTLER_COUNT]".

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:28 -04:00
Evan Quan
b407a3aa28 drm/amd/pm: new SmuMetrics data structure for Sienna Cichlid
Due to the structure layout change: "uint32_t ThrottlerStatus" -> "
uint8_t  ThrottlingPercentage[THROTTLER_COUNT]".

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:28 -04:00
Dan Carpenter
64598e23de drm/amdgpu: return -EFAULT if copy_to_user() fails
If copy_to_user() fails then this should return -EFAULT instead of
-EINVAL.

Fixes: c65b0805e7 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:28 -04:00
Dan Carpenter
b8badd507a drm/amdgpu: unlock on error in amdgpu_ras_debugfs_table_read()
This error path needs to unlock before returning.  While we're at it,
the correct error code from copy_to_user() failure is -EFAULT, not
-EINVAL.

Fixes: c65b0805e7 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08 17:47:16 -04:00
David S. Miller
5702b81ea4 Merge branch 'ncsi-phy-link-up'
Ivan Mikhaylov says:

====================
net/ncsi: Add NCSI Intel OEM command to keep PHY link up

Add NCSI Intel OEM command to keep PHY link up and prevents any channel
resets during the host load on i210. Also includes dummy response handler for
Intel manufacturer id.

Changes from v1:
 1. sparse fixes about casts
 2. put it after ncsi_dev_state_probe_cis instead of
    ncsi_dev_state_probe_channel because sometimes channel is not ready
    after it
 3. inl -> intel
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 14:16:39 -07:00
Ivan Mikhaylov
163f5de509 net/ncsi: add dummy response handler for Intel boards
Add the dummy response handler for Intel boards to prevent incorrect
handling of OEM commands.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 14:16:39 -07:00
Ivan Mikhaylov
abd2fddc94 net/ncsi: add NCSI Intel OEM command to keep PHY up
This allows to keep PHY link up and prevents any channel resets during
the host load.

It is KEEP_PHY_LINK_UP option(Veto bit) in i210 datasheet which
block PHY reset and power state changes.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 14:16:39 -07:00
Ivan Mikhaylov
27fa107d3b net/ncsi: fix restricted cast warning of sparse
Sparse reports:
net/ncsi/ncsi-rsp.c:406:24: warning: cast to restricted __be32
net/ncsi/ncsi-manage.c:732:33: warning: cast to restricted __be32
net/ncsi/ncsi-manage.c:756:25: warning: cast to restricted __be32
net/ncsi/ncsi-manage.c:779:25: warning: cast to restricted __be32

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 14:16:39 -07:00
Randy Dunlap
96248d6da6 net: microchip: sparx5: fix kconfig warning
PHY_SPARX5_SERDES depends on OF so SPARX5_SWITCH should also depend
on OF since 'select' does not follow any dependencies.

WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES
  Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=n] && HAS_IOMEM [=y]
  Selected by [y]:
  - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y]

Fixes: 3cfa11bac9 ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 13:59:29 -07:00
Beatriz Martins de Carvalho
911684de2a drm/vkms: Create a debugfs file to get vkms config data
Creating a vkms_config debugfs file in vkms_drv.c to get/track vkms config
data, for the long-term plan of making vkms configurable and have multiple
different instances.

Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708092002.11847-1-martinsdecarvalhobeatriz@gmail.com
2021-07-08 21:44:13 +01:00
Shahjada Abul Husain
015fe6fd29 cxgb4: fix IRQ free race during driver unload
IRQs are requested during driver's ndo_open() and then later
freed up in disable_interrupts() during driver unload.
A race exists where driver can set the CXGB4_FULL_INIT_DONE
flag in ndo_open() after the disable_interrupts() in driver
unload path checks it, and hence misses calling free_irq().

Fix by unregistering netdevice first and sync with driver's
ndo_open(). This ensures disable_interrupts() checks the flag
correctly and frees up the IRQs properly.

Fixes: b37987e8db ("cxgb4: Disable interrupts and napi before unregistering netdev")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 13:34:13 -07:00
Aaron Ma
c342690411 mt76: mt7921: continue to probe driver when fw already downloaded
When reboot system, no power cycles, firmware is already downloaded,
return -EIO will break driver as error:
mt7921e: probe of 0000:03:00.0 failed with error -5

Skip firmware download and continue to probe.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 1c099ab447 ("mt76: mt7921: add MCU support")
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 13:33:13 -07:00
Gatis Peisenieks
b9d233ea21 atl1c: fix Mikrotik 10/25G NIC detection
Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable,
on rare occasions it can happen that some physical functions of
the NIC do not get initialized due to timeouted early MDIO op.

This changes the atl1c probe on Mikrotik 10/25G NIC not to
depend on MDIO op emulation.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 13:31:43 -07:00
Valentin Schneider
6a942f5780 s390: preempt: Fix preempt_count initialization
S390's init_idle_preempt_count(p, cpu) doesn't actually let us initialize the
preempt_count of the requested CPU's idle task: it unconditionally writes
to the current CPU's. This clearly conflicts with idle_threads_init(),
which intends to initialize *all* the idle tasks, including their
preempt_count (or their CPU's, if the arch uses a per-CPU preempt_count).

Unfortunately, it seems the way s390 does things doesn't let us initialize
every possible CPU's preempt_count early on, as the pages where this
resides are only allocated when a CPU is brought up and are freed when it
is brought down.

Let the arch-specific code set a CPU's preempt_count when its lowcore is
allocated, and turn init_idle_preempt_count() into an empty stub.

Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210707163338.1623014-1-valentin.schneider@arm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Vasily Gorbik
4ee471fe5a s390/linkage: increase asm symbols alignment to 16
Both clang and gcc (for -march=z13 and later) align functions to 16
bytes at -O2 to benefit branch prediction.

Make asm symbols alignment consistent with that.

This also benefits potential ftrace code patching, which is currently
able to patch 8 aligned bytes at once.

With defconfig this currently increases .text size by 4104 bytes.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
b55e692e6b s390: rename CALL_ON_STACK_NORETURN() to call_on_stack_noreturn()
Lower case matches the call_on_stack() macro and is easier to read.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
a9b660849f s390: add type checking to CALL_ON_STACK_NORETURN() macro
Make sure the to be called function takes no arguments (and returns void).
Otherwise usage of CALL_ON_STACK_NORETURN() would generate broken code.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
60a4813c47 s390: remove old CALL_ON_STACK() macro
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00
Heiko Carstens
b8f4c89fd7 s390/softirq: use call_on_stack() macro
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 22:12:18 +02:00