xfs_qm_quotacheck_dqadjust acquired the dquot through xfs_qm_dqget,
which means it owns a reference and holds q_qlock. Both need to
be dropped on an error exit.
Cc: <stable@vger.kernel.org> # v6.13
Fixes: ca378189fd ("xfs: convert quotacheck to attach dquot buffers")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Some Marvell AP firmware used with mwl8k misbehaves when beacon frames
do not contain a WLAN_EID_DS_PARAMS element with the current channel.
It was reported on OpenWrt Github issues [0].
When hostapd/mac80211 omits DSSS Parameter Set from the beacon (which is
valid on some bands), the firmware stops transmitting sane frames and RX
status starts reporting bogus channel information. This makes AP mode
unusable.
Newer Marvell drivers (mwlwifi [1]) hard-code DSSS Parameter Set into
AP beacons for all chips, which suggests this is a firmware requirement
rather than a mwl8k-specific quirk.
Mirror that behaviour in mwl8k: when setting the beacon, check if
WLAN_EID_DS_PARAMS is present, and if not, extend the beacon and inject
a DSSS Parameter Set element, using the current channel from
hw->conf.chandef.chan.
Tested on Linksys EA4500 (88W8366).
[0] https://github.com/openwrt/openwrt/issues/19088
[1] db97edf20f/hif/fwcmd.c (L675)
Fixes: b64fe619e3 ("mwl8k: basic AP interface support")
Tested-by: Antony Kolitsos <zeusomighty@hotmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://patch.msgid.link/20251111100733.2825970-3-paweldembicki@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Plus a rtgroup wrapper and use that to avoid overflows when converting
zone/rtg counts to block counts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In one of the error paths, the memory allocated for skb_rx is not freed.
Fix that by freeing it before returning.
Fixes: a910e4a94f ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20251110175316.106591-1-nihaal@cse.iitm.ac.in
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Verify that only one of the permitted change flags is set when changing
the link of a monitor interface. Before the WARN_ON_ONCE would accept
anything if mu_mimo_owner was set.
Also, split out the mu_mimo_owner flag and enable it for all interface
types. The option is set during association when VHT is available and it
is not expected that any configuration of the MU groups is done without
it being set.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110141948.6696dba8678d.Icafac3be4724825dd6140e4407bae3a2adb593a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For monitoring, userspace will try to configure the VIF sdata, while the
driver may see the monitor_sdata that is created when only monitor
interfaces are up. This causes the odd situation that it may not be
possible to store the MU-MIMO configuration on monitor_sdata.
Fix this by storing that information on the VIF sdata and updating the
monitor_sdata when available and the interface is up. Also, adjust the
code that adds monitor_sdata so that it will configure MU-MIMO based on
the newly added interface or one of the existing ones.
This should give a mostly consistent behaviour when configuring MU-MIMO
on sniffer interfaces. Should the user configure MU-MIMO on multiple
sniffer interfaces, then mac80211 will simply select one of the
configurations. This behaviour should be good enough and avoids breaking
user expectations in the common scenarios.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110141514.677915f8f6bb.If4e04a57052f9ca763562a67248b06fd80d0c2c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement fallback to LPI mode when SP mode is not permitted
by regulatory constraints for INDOOR_SP connections.
Limit fallback mechanism to client mode.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140806.8b43201a34ae.I37fc7bb5892eb9d044d619802e8f2095fde6b296@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move duplicated ap_power type handling code to an inline
function in cfg80211.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140806.959948da1cb5.I893b5168329fb3232f249c182a35c99804112da6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct regulatory request was not fully initialized. While this is not
really a big deal because nl80211_send_reg_change_event doesn't look at
the other fields, it still makes sense to zero all the other fields as
Coverity suggests.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140230.f8d4fcb1328b.I87170b1caef04356809838e684c9499f5806e624@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251111094302.95003-1-sakari.ailus@linux.intel.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This should avoid *some* cache misses.
Successful path lookup is guaranteed to load at least ->i_mode,
->i_opflags and ->i_acl. At the same time the common case will avoid
looking at more fields.
struct inode is not guaranteed to have any particular alignment, notably
ext4 has it only aligned to 8 bytes meaning nearby fields might happen
to be on the same or only adjacent cache lines depending on luck (or no
luck).
According to pahole:
umode_t i_mode; /* 0 2 */
short unsigned int i_opflags; /* 2 2 */
kuid_t i_uid; /* 4 4 */
kgid_t i_gid; /* 8 4 */
unsigned int i_flags; /* 12 4 */
struct posix_acl * i_acl; /* 16 8 */
struct posix_acl * i_default_acl; /* 24 8 */
->i_acl is unnecessarily separated by 8 bytes from the other fields.
With struct inode being offset 48 bytes into the cacheline this means an
avoidable miss. Note it will still be there for the 56 byte case.
New layout:
umode_t i_mode; /* 0 2 */
short unsigned int i_opflags; /* 2 2 */
unsigned int i_flags; /* 4 4 */
struct posix_acl * i_acl; /* 8 8 */
struct posix_acl * i_default_acl; /* 16 8 */
kuid_t i_uid; /* 24 4 */
kgid_t i_gid; /* 28 4 */
I verified with pahole there are no size or hole changes.
This is stopgap until someone(tm) sanitizes the layout in the first
place, allocation methods aside.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251109121931.1285366-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The i.MX6UL reference manual lists two possible interrupt lines for
SAI3 (56 and 57, offset +32). The current device tree entry uses
the first one (24), which prevents IRQs from being handled properly.
Use the second interrupt line (25), which does allow interrupts
to work as expected.
Fixes: 36e2edf6ac ("ARM: dts: imx6ul: add sai support")
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since Eric proposed an idea about adding indirect call wrappers for
UDP and managed to see a huge improvement[1], the same situation can
also be applied in xsk scenario.
This patch adds an indirect call for xsk and helps current copy mode
improve the performance by around 1% stably which was observed with
IXGBE at 10Gb/sec loaded. If the throughput grows, the positive effect
will be magnified. I applied this patch on top of batch xmit series[2],
and was able to see <5% improvement from our internal application
which is a little bit unstable though.
Use INDIRECT wrappers to keep xsk_destruct_skb static as it used to
be when the mitigation config is off.
Be aware of the freeing path that can be very hot since the frequency
can reach around 2,000,000 times per second with the xdpsock test.
[1]: https://lore.kernel.org/netdev/20251006193103.2684156-2-edumazet@google.com/
[2]: https://lore.kernel.org/all/20251021131209.41491-1-kerneljasonxing@gmail.com/
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251031103328.95468-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver calls reset_control_get_optional_exclusive() but never calls
reset_control_put() in error paths or in the remove function. This causes
a resource leak when probe fails after successfully acquiring the reset
control, or when the driver is unloaded.
Switch to devm_reset_control_get_optional_exclusive() to automatically
manage the reset control resource.
Fixes: a4b80242d0 ("media: st-rc: explicitly request exclusive reset control")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20240115094330.33014-1-chentao@kylinos.cn
This file was missing the shebang line, so added it.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250722220043.14862-1-unixbhaskar@gmail.com
Certain versions of kexec don't even work without kernel-end being
added to the device-tree. Add it even if crash-kernel is disabled.
Signed-off-by: Ben Collins <bcollins@kernel.org>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2025042122-inescapable-mandrill-8a5ff2@boujee-and-buff
The watchdog.yaml schema prescribes a node name of "timer" or "watchdog"
rather than the abbreviation "wdt".
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250418-watchdog-v1-4-987ff2046272@posteo.net
The watchdog.yaml schema prescribes a node name of "timer" or "watchdog"
rather than the abbreviation "wdt".
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250418-watchdog-v1-3-987ff2046272@posteo.net
The watchdog.yaml schema prescribes a node name of "timer" or "watchdog"
rather than the abbreviation "wdt".
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250418-watchdog-v1-2-987ff2046272@posteo.net
The watchdog.yaml schema prescribes a node name of "timer" or "watchdog"
rather than the abbreviation "wdt".
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250418-watchdog-v1-1-987ff2046272@posteo.net
The PUT_64[LB]E() macros need to cast the value to unsigned long long
like the GET_64[LB]E() macros. Caused lots of warnings when compiled
on 32-bit, and clobbered addresses (36-bit P4080).
Signed-off-by: Ben Collins <bcollins@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2025042122-mustard-wrasse-694572@boujee-and-buff
Christian Brauner <brauner@kernel.org> says:
Cleanup the namespace headers by splitting them into types and helpers.
Better separate common namepace types and functions from namespace tree
types and functions.
Fix the reference counts of initial namespaces so we don't do any
pointless cacheline ping-pong for them when we know they can never go
away. Add a bunch of asserts for both the passive and active reference
counts to catch any changes that would break it.
* patches from https://patch.msgid.link/20251110-work-namespace-nstree-fixes-v1-0-e8a9264e0fb9@kernel.org:
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
Link: https://patch.msgid.link/20251110-work-namespace-nstree-fixes-v1-0-e8a9264e0fb9@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stop playing games with the namespace id and use a boolean instead:
* This will remove the special-casing we need to do everywhere for mount
namespaces.
* It will allow us to use asserts on the namespace id for initial
namespaces everywhere.
* It will allow us to put anonymous mount namespaces on the namespaces
trees in the future and thus make them available to statmount() and
listmount().
Link: https://patch.msgid.link/20251110-work-namespace-nstree-fixes-v1-10-e8a9264e0fb9@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Bring in the shared branch with the kbuild tree to enable
'-fms-extensions' for 6.19. Further namespace cleanup work
requires this extension.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit da30705c46 ("arch/powerpc: Remove .interp section in vmlinux")
intended to drop the .interp section from vmlinux but even with this
change, relocatable kernels linked with ld.lld contain an empty .interp
section, which ends up causing crashes in GDB [1].
$ make -skj"$(nproc)" ARCH=powerpc LLVM=1 clean pseries_le_defconfig vmlinux
$ llvm-readelf -S vmlinux | grep interp
[44] .interp PROGBITS c0000000021ddb34 21edb34 000000 00 A 0 0 1
There appears to be a subtle difference between GNU ld and ld.lld when
it comes to discarding sections that specify load addresses [2].
Since '--no-dynamic-linker' prevents emission of the .interp section,
there is no need to describe it in the output sections of the vmlinux
linker script. Drop the .interp section description from vmlinux.lds.S
to avoid this issue altogether.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=33481 [1]
Link: https://github.com/ClangBuiltLinux/linux/issues/2137 [2]
Reported-by: Vishal Chourasia <vishalc@linux.ibm.com>
Closes: https://lore.kernel.org/20251013040148.560439-1-vishalc@linux.ibm.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251018-ppc-fix-lld-interp-v1-1-a083de6dccc9@kernel.org
In struct CoherentAllocation, use NonNull<T> instead of a raw *mut T for
the CPU address; the CPU address of a valid CoherentAllocation won't
ever be NULL.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251103190655.2326191-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Using start_ptr() and start_ptr_mut() has the advantage that we inherit
the requirements the a mutable or immutable reference from those
methods.
Hence, use them instead of self.cpu_addr.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251103190655.2326191-1-dakr@kernel.org
[ Keep using self.cpu_addr in item_from_index(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
