Add rtw8852a_dle_mem_usb and its various quotas and sizes in struct
rtw89_mac_size_set.
"dle" could be "Data Link Engine" or "Double Link Engine". These are
some parameters needed for RTL8852AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/d0a09039-97a8-4501-b023-510c126d8c61@gmail.com
Aksh Garg says:
====================
Fix IET verification implementation for CPSW driver
The CPSW module supports Intersperse Express Traffic (IET) and allows
the MAC layer to verify whether the peer supports IET through its MAC
merge sublayer, by sending a verification packet and waiting for its
response until the timeout. As defined in IEEE 802.3 Clause 99, the
verification process involves up to 3 verification attempts to
establish support.
This patch series fixes issues in the implementation of this IET
verification process.
====================
Link: https://patch.msgid.link/20251106092305.1437347-1-a-garg7@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The am65_cpsw_iet_verify_wait() function attempts verification 20 times,
toggling the AM65_CPSW_PN_IET_MAC_LINKFAIL bit in each iteration. When
the LINKFAIL bit transitions from 1 to 0, the MAC merge layer initiates
the verification process and waits for the timeout configured in
MAC_VERIFY_CNT before automatically retransmitting. The MAC_VERIFY_CNT
register is configured according to the user-defined verify/response
timeout in am65_cpsw_iet_set_verify_timeout_count(). As per IEEE 802.3
Clause 99, the hardware performs this automatic retry up to 3 times.
Current implementation toggles LINKFAIL after the user-configured
verify/response timeout in each iteration, forcing the hardware to
restart verification instead of respecting the MAC_VERIFY_CNT timeout.
This bypasses the hardware's automatic retry mechanism.
Fix this by moving the LINKFAIL bit toggle outside the retry loop and
reducing the retry count from 20 to 3. The software now only monitors
the status register while the hardware autonomously handles the 3
verification attempts at proper MAC_VERIFY_CNT intervals.
Fixes: 49a2eb9068 ("net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Link: https://patch.msgid.link/20251106092305.1437347-3-a-garg7@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CPSW module uses the MAC_VERIFY_CNT bit field in the
CPSW_PN_IET_VERIFY_REG_k register to set the verify/response timeout
count. This register specifies the number of clock cycles to wait before
resending a verify packet if the verification fails.
The verify/response timeout count, as being set by the function
am65_cpsw_iet_set_verify_timeout_count() is hardcoded for 125MHz
clock frequency, which varies based on PHY mode and link speed.
The respective clock frequencies are as follows:
- RGMII mode:
* 1000 Mbps: 125 MHz
* 100 Mbps: 25 MHz
* 10 Mbps: 2.5 MHz
- QSGMII/SGMII mode: 125 MHz (all speeds)
Fix this by adding logic to calculate the correct timeout counts
based on the actual PHY interface mode and link speed.
Fixes: 49a2eb9068 ("net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Link: https://patch.msgid.link/20251106092305.1437347-2-a-garg7@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make rtw89_mac_pwr_seq() select the right parts of the power sequences
based on the interface type.
This is only relevant for RTL8852A. The other chips don't use power
sequences.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/dec13310-06eb-429e-acb8-4c5b62656836@gmail.com
In tls_handshake_accept(), a netlink message is allocated using
genlmsg_new(). In the error handling path, genlmsg_cancel() is called
to cancel the message construction, but the message itself is not freed.
This leads to a memory leak.
Fix this by calling nlmsg_free() in the error path after genlmsg_cancel()
to release the allocated memory.
Fixes: 2fd5532044 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20251106144511.3859535-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current CLC proposal message construction uses a mix of
`ini->smc_type_v1/v2` and `pclc_base->hdr.typev1/v2` to decide whether
to include optional extensions (IPv6 prefix extension for v1, and v2
extension). This leads to a critical inconsistency: when
`smc_clc_prfx_set()` fails - for example, in IPv6-only environments with
only link-local addresses, or when the local IP address and the outgoing
interface’s network address are not in the same subnet.
As a result, the proposal message is assembled using the stale
`ini->smc_type_v1` value—causing the IPv6 prefix extension to be
included even though the header indicates v1 is not supported.
The peer then receives a malformed CLC proposal where the header type
does not match the payload, and immediately resets the connection.
The fix ensures consistency between the CLC header flags and the actual
payload by synchronizing `ini->smc_type_v1` with `pclc_base->hdr.typev1`
when prefix setup fails.
Fixes: 8c3dca341a ("net/smc: build and send V2 CLC proposal")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20251107024029.88753-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netif_carrier_ok() doesn't check if the slave is up. Before the below
commit, netif_running() was also checked.
Fixes: 23a6037ce7 ("bonding: Remove support for use_carrier")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20251106180252.3974772-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ankit Garg says:
====================
gve: Improve RX buffer length management
This patch series improves the management of the RX buffer length for
the DQO queue format in the gve driver. The goal is to make RX buffer
length config more explicit, easy to change, and performant by default.
We accomplish that in four patches:
1. Currently, the buffer length is implicitly coupled with the header
split setting, which is an unintuitive and restrictive design. The
first patch decouples the RX buffer length from the header split
configuration.
2. The second patch is a preparatory step for third. It converts the XDP
config verification method to use extack for better error reporting.
3. The third patch exposes the `rx_buf_len` parameter to userspace via
ethtool, allowing user to directly view or modify the RX buffer length
if supported by the device.
4. The final patch improves the out-of-the-box RX single stream throughput
by >10% by changing the driver's default behavior to select the
maximum supported RX buffer length advertised by the device during
initialization.
====================
Link: https://patch.msgid.link/20251106192746.243525-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the driver's default behavior to prefer the largest available RX
buffer length supported by the device for DQO format, rather than always
using the hardcoded 2K default.
Previously, the driver would initialize with
`GVE_DEFAULT_RX_BUFFER_SIZE` (2K), even if the device advertised support
for a larger length (e.g., 4K).
Performance observations:
- With LRO disabled, we observed >10% improvement in RX single stream
throughput when MTU >=2048.
- With LRO enabled, we observed >10% improvement in RX single stream
throughput when MTU >=1460.
- No regressions were observed.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251106192746.243525-5-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for getting and setting the RX buffer length via the
ethtool ring parameters (`ethtool -g`/`-G`). The driver restricts the
allowed buffer length to 2048 (SZ_2K) by default and allows 4096 (SZ_4K)
based on device options.
As XDP is only supported when the `rx_buf_len` is 2048, the driver now
enforces this in two places:
1. In `gve_xdp_set`, rejecting XDP programs if the current buffer
length is not 2048.
2. In `gve_set_rx_buf_len_config`, rejecting buffer length changes if XDP
is loaded and the new length is not 2048.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251106192746.243525-4-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Plumb extack as it allows us to send more detailed error messages back
and append 'gve' suffix to method name per convention.
NL_SET_ERR_MSG_FMT_MOD doesn't support format string longer than 80
chars so keeping netdev warning with actual queue count details.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251106192746.243525-3-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, enabling header split via `gve_set_hsplit_config` also
implicitly changed the RX buffer length to 4K (if supported by the
device). This coupled two settings that should be orthogonal; this patch
removes that side effect.
After this change, `gve_set_hsplit_config` only toggles the header
split configuration. The RX buffer length is no longer affected and
must be configured independently.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251106192746.243525-2-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: ingenic: convert to set_phy_intf_sel()
Convert ingenic to use the new ->set_phy_intf_sel() method that was
recently introduced in net-next.
This is the largest of the conversions, as there is scope for cleanups
along with the conversion.
====================
Link: https://patch.msgid.link/aQ2tgEu-dudzlZlg@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than placing the phy_intf_sel() setup in the ->init() method,
move it to the new ->set_phy_intf_sel() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHqY-0000000Djrn-1D6H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It no longer makes sense to pass a pointer to struct
plat_stmmacenet_data when calling the set_mode() methods to only use it
to get a pointer to the ingenic_mac structure that we already had in
the caller. Simplify this by passing the struct ingenic_mac pointer.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHqT-0000000Djrh-0ka3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per the previous commit, we have validated that the phy_intf_sel
value is one that is permissible for this SoC, so there is no need to
handle invalid PHY interface modes. We can also apply the other
configuration based upon the phy_intf_sel value rather than the
PHY interface mode.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHqO-0000000Djrb-0DPN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
x1000, x1600 and x1830 only accept RMII mode. PHY_INTF_SEL_RMII is only
selected with PHY_INTERFACE_MODE_RMII, and PHY_INTF_SEL_RMII has been
validated by the SoC's .valid_phy_intf_sel bitmask. Thus, checking the
interface mode in these functions becomes unnecessary. Remove these.
jz4775 is similar, except for a greater set of PHY_INTF_SEL_x valies.
Also remove the switch statement here.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHqI-0000000DjrV-3ygL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the printing of the MAC PHY control register interface mode
setting into ingenic_set_phy_intf_sel(), and use phy_modes() to
print the string rather than using the enum name.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHqD-0000000DjrP-3aaU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result against the SoC specific
supported phy_intf_sel values, and pass into the SoC specific
set_mode() methods, replacing the local phy_intf_sel variable. This
provides the value for the MACPHYC_PHY_INFT_MASK field.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHq8-0000000DjrJ-2NRK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the preparation of the PHY_INTF_SEL_x bitfield out of the switch()
statement such that it only appears once.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHq3-0000000DjrD-1u8O@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the PHY_INTF_SEL_x values directly in each of the mac_set_mode
methods rather than the driver private MACPHYC_PHY_INFT_x definitions.
Remove the MACPHYC_PHY_INFT_x definitions.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHpy-0000000Djr7-1R1m@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the common dwmac definitions for the PHY interface selection field.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHpt-0000000Djr1-0wwr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All paths configure the transmit clock as an input. Move this out of
the switch() statement to simplify the code.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHpo-0000000Djqv-0RD4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move ingenic_mac_init() to between variant specific set_mode()
implementations and ingenic_mac_probe(). No code changes.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHpi-0000000Djqp-4910@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current implementation, usbnet uses a fixed tx_qlen of:
USB2: 60 * 1518 bytes = 91.08 KB
USB3: 60 * 5 * 1518 bytes = 454.80 KB
Such large transmit queues can be problematic, especially for cellular
modems. For example, with a typical celluar link speed of 10 Mbit/s, a
fully occupied USB3 transmit queue results in:
454.80 KB / (10 Mbit/s / 8 bit/byte) = 363.84 ms
of additional latency.
This patch adds support for Byte Queue Limits (BQL) [1] to dynamically
manage the transmit queue size and reduce latency without sacrificing
throughput.
Testing was performed on various devices using the usbnet driver for
packet transmission:
- DELOCK 66045: USB3 to 2.5 GbE adapter (ax88179_178a)
- DELOCK 61969: USB2 to 1 GbE adapter (asix)
- Quectel RM520: 5G modem (qmi_wwan)
- USB2 Android tethering (cdc_ncm)
No performance degradation was observed for iperf3 TCP or UDP traffic,
while latency for a prioritized ping application was significantly
reduced. For example, using the USB3 to 2.5 GbE adapter, which was fully
utilized by iperf3 UDP traffic, the prioritized ping was improved from
1.6 ms to 0.6 ms. With the same setup but with a 100 Mbit/s Ethernet
connection, the prioritized ping was improved from 35 ms to 5 ms.
[1] https://lwn.net/Articles/469652/
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106175615.26948-1-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When freeing indexed arrays, the corresponding free function should
be called for each entry of the indexed array. For example, for
for 'struct tc_act_attrs' 'tc_act_attrs_free(...)' needs to be called
for each entry.
Previously, memory leaks were reported when enabling the ASAN
analyzer.
=================================================================
==874==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
#1 0x55c98db048af in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813
#2 0x55c98db048af in main ./linux/tools/net/ynl/samples/tc-filter-add.c:71
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
#1 0x55c98db04a93 in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813
#2 0x55c98db04a93 in main ./linux/tools/net/ynl/samples/tc-filter-add.c:74
Direct leak of 10 byte(s) in 2 object(s) allocated from:
#0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
#1 0x55c98db0527d in tc_act_attrs_set_kind ../generated/tc-user.h:1622
SUMMARY: AddressSanitizer: 58 byte(s) leaked in 4 allocation(s).
The following diff illustrates the changes introduced compared to the
previous version of the code.
void tc_flower_attrs_free(struct tc_flower_attrs *obj)
{
+ unsigned int i;
+
free(obj->indev);
+ for (i = 0; i < obj->_count.act; i++)
+ tc_act_attrs_free(&obj->act[i]);
free(obj->act);
free(obj->key_eth_dst);
free(obj->key_eth_dst_mask);
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251106151529.453026-3-zahari.doychev@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonas Gorski says:
====================
net: dsa: b53: add support for BCM5389/97/98 and BCM63XX ARL formats
Currently b53 assumes that all switches apart from BCM5325/5365 use the
same ARL formats, but there are actually multiple formats in use.
Older switches use a format apparently introduced with BCM5387/BCM5389,
while newer chips use a format apparently introduced with BCM5395.
Note that these numbers are not linear, BCM5397/BCM5398 use the older
format.
In addition to that the switches integrated into BCM63XX SoCs use their
own format. While accessing these normal read/write ARL entries are the
same format as BCM5389 one, the search format is different.
So in order to support all these different format, split all code
accessing these entries into chip-family specific functions, and collect
them in appropriate arl ops structs to keep the code cleaner.
Sent as net-next since the ARL accesses have never worked before, and
the extensive refactoring might be too much to warrant a fix.
====================
Link: https://patch.msgid.link/20251107080749.26936-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ARL registers of BCM63XX embedded switches are somewhat unique. The
normal ARL table access registers have the same format as BCM5389, but
the ARL search registers differ:
* SRCH_CTL is at the same offset of BCM5389, but 16 bits wide. It does
not have more fields, just needs to be accessed by a 16 bit read.
* SRCH_RSLT_MACVID and SRCH_RSLT are aligned to 32 bit, and have shifted
offsets.
* SRCH_RSLT has a different format than the normal ARL data entry
register.
* There is only one set of ENTRY_N registers, implying a 1 bin layout.
So add appropriate ops for bcm63xx and let it use it.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-9-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM5389, BCM5397 and BCM5398 use a different ARL entry format with just
a 16 bit fwdentry register, as well as different search control and data
offsets.
So add appropriate ops for them and switch those chips to use them.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-8-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the differences in ARL entry formats are neatly contained into
functions per chip family, wrap them into an ops struct and add wrapper
functions to access them.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-7-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Split reading search entries into a function for each format.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-6-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to more easily support more formats, move accessing
ARL_SRCH_CTL into helper functions to contain the differences.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-5-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move writing ARL entries into individual functions for each format.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-4-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of duplicating the whole code iterating over all bins for
BCM5325, factor out reading and parsing the entry into its own
functions, and name it the modern one after the first chip with that ARL
format, (BCM53)95.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Align the b53_arl_read{,25}() functions by consistently using the
parsed arl entry instead of parsing the raw registers again.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Various fixes for the module reset procedure on R-Car Gen4 SoCs,
- Add ADC and thermal (TSU) clocks on RZ/T2H and RZ/N2H,
- Add USB clocks and resets on RZ/G3E,
- Add ISP and display (DSI, LCDC) clocks and resets on RZ/V2H and RZ/V2N,
- Add thermal (TSU) and RTC clocks and resets on RZ/V2H,
- Add reset support on RZ/T2H and RZ/N2H,
- Fix the module stop disable procedure on RZ/T2H and RZ/N2H,
- Add camera (CRU) clocks and resets on RZ/V2N,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaQSODgAKCRCKwlD9ZEnx
cADZAP4xm+4mGciCjAkvNotnZiE6UvJrDJGLuRPEMxxSP/IZQgD+Nks2rsHwnVQQ
VMySY0DrTG0aopWDAqaXfKXK4l22Xwk=
=GNXF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1gJz
-----END PGP SIGNATURE-----
Merge tag 'renesas-clk-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull Renesas clk driver updates from Geert Uytterhoeven:
- Various fixes for the module reset procedure on R-Car Gen4 SoCs
- Add ADC and thermal (TSU) clocks on RZ/T2H and RZ/N2H
- Add USB clocks and resets on RZ/G3E
- Add ISP and display (DSI, LCDC) clocks and resets on RZ/V2H and RZ/V2N
- Add thermal (TSU) and RTC clocks and resets on RZ/V2H
- Add reset support on RZ/T2H and RZ/N2H
- Fix the module stop disable procedure on RZ/T2H and RZ/N2H
- Add camera (CRU) clocks and resets on RZ/V2N
* tag 'renesas-clk-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: (21 commits)
clk: renesas: r9a09g056: Add clock and reset entries for ISP
clk: renesas: r9a09g056: Add support for PLLVDO, CRU clocks, and resets
clk: renesas: r9a09g056: Add clocks and resets for DSI and LCDC modules
clk: renesas: r9a09g077: Add TSU module clock
clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
clk: renesas: rzv2h: Add support for DSI clocks
clk: renesas: rzv2h: Use GENMASK for PLL fields
clk: renesas: rzv2h: Add instance field to struct pll
clk: renesas: r9a09g057: Add clock and reset entries for RTC
clk: renesas: cpg-mssr: Spelling s/offets/offsets/
clk: renesas: r9a09g057: Add clock and reset entries for TSU
clk: renesas: cpg-mssr: Add read-back and delay handling for RZ/T2H MSTP
clk: renesas: cpg-mssr: Add module reset support for RZ/T2H
clk: renesas: r9a09g057: Add clock and reset entries for ISP
clk: renesas: r9a09g047: Add clock and reset entries for USB2
clk: renesas: Use IS_ERR() for pointers that cannot be NULL
dt-bindings: clock: renesas,r9a09g047-cpg: Add USB2 PHY core clocks
clk: renesas: cpg-lib: Remove unneeded semicolon
clk: renesas: r9a09g077: Add ADC module clocks
clk: renesas: cpg-mssr: Read back reset registers to assure values latched
...
ie31200_register_mci() calls device_initialize() for priv->dev
unconditionally. However, in the error path, put_device() is not
called, leading to an imbalance. Similarly, in the unload path,
put_device() is missing.
Although edac_mc_free() eventually frees the memory, it does not
release the device initialized by device_initialize(). For code
readability and proper pairing of device_initialize()/put_device(),
add put_device() calls in both error and unload paths.
Found by code review.
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/20251106084735.35017-1-make24@iscas.ac.cn
Broadcom switches locally terminate link local traffic and do not
forward it, so we should not mark it as offloaded.
In some situations we still want/need to flood this traffic, e.g. if STP
is disabled, or it is explicitly enabled via the group_fwd_mask. But if
the skb is marked as offloaded, the kernel will assume this was already
done in hardware, and the packets never reach other bridge ports.
So ensure that link local traffic is never marked as offloaded, so that
the kernel can forward/flood these packets in software if needed.
Since the local termination in not configurable, check the destination
MAC, and never mark packets as offloaded if it is a link local ether
address.
While modern switches set the tag reason code to BRCM_EG_RC_PROT_TERM
for trapped link local traffic, they also set it for link local traffic
that is flooded (01:80:c2:00:00:10 to 01:80:c2:00:00:2f), so we cannot
use it and need to look at the destination address for them as well.
Fixes: 964dbf186e ("net: dsa: tag_brcm: add support for legacy tags")
Fixes: 0e62f543be ("net: dsa: Fix duplicate frames flooded by learning")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251109134635.243951-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver's probe function matches against driver's of_device_id table,
where each entry has non-NULL match data, so of_match_node() can be
simplified with of_device_get_match_data().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[sboyd@kernel.org: Use device_get_match_data() instead, drop
printk noise]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The tracing selftest "event-filter-function.tc" was failing because it
first runs the "sample_events" function that triggers the kmem_cache_free
event and it looks at what function was used during a call to "ls".
But the first time it calls this, it could trigger events that are used to
pull pages into the page cache.
The rest of the test uses the function it finds during that call to see if
it will be called in subsequent "sample_events" calls. But if there's no
need to pull pages into the page cache, it will not trigger that function
and the test will fail.
Call the "sample_events" twice to trigger all the page cache work before
it calls it to find a function to use in subsequent checks.
Cc: stable@vger.kernel.org
Fixes: eb50d0f250 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaRJJFwAKCRAraS+Z+3y5
E8eZAQDWQ3D76HOlLK8tBAQ8aSpxwsfr7fpheiMSCEI5r7O5sQEA5LuHrBvEb/Cr
zfU7DxhEQEoVeJMTSia2hEJKWhoNpQ0=
=n2Ap
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-11-10
We've added 19 non-merge commits during the last 3 day(s) which contain
a total of 22 files changed, 1345 insertions(+), 197 deletions(-).
The main changes are:
1) Preserve skb metadata after a TC BPF program has changed the skb,
from Jakub Sitnicki.
This allows a TC program at the end of a TC filter chain to still see
the skb metadata, even if another TC program at the front of the chain
has changed the skb using BPF helpers.
2) Initial af_smc bpf_struct_ops support to control the smc specific
syn/synack options, from D. Wythe.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf/selftests: Add selftest for bpf_smc_hs_ctrl
net/smc: bpf: Introduce generic hook for handshake flow
bpf: Export necessary symbols for modules with struct_ops
selftests/bpf: Cover skb metadata access after bpf_skb_change_proto
selftests/bpf: Cover skb metadata access after change_head/tail helper
selftests/bpf: Cover skb metadata access after bpf_skb_adjust_room
selftests/bpf: Cover skb metadata access after vlan push/pop helper
selftests/bpf: Expect unclone to preserve skb metadata
selftests/bpf: Dump skb metadata on verification failure
selftests/bpf: Verify skb metadata in BPF instead of userspace
bpf: Make bpf_skb_change_head helper metadata-safe
bpf: Make bpf_skb_change_proto helper metadata-safe
bpf: Make bpf_skb_adjust_room metadata-safe
bpf: Make bpf_skb_vlan_push helper metadata-safe
bpf: Make bpf_skb_vlan_pop helper metadata-safe
vlan: Make vlan_remove_tag return nothing
bpf: Unclone skb head on bpf_dynptr_write to skb metadata
net: Preserve metadata on pskb_expand_head
net: Helper to move packet data and metadata after skb_push/pull
====================
Link: https://patch.msgid.link/20251110232427.3929291-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When converting the Renesas network drivers to use flags from enum
hwtstamp_rx_filters to control when to timestamp packages instead of a
driver specific schema with bit-wise flags an error was made.
The bit-wise driver specific flags correct logic to set get_ts was:
q: RAVB_BE + tstamp_rx_ctrl: 0 => 0
q: RAVB_NC + tstamp_rx_ctrl: 0 => 0
q: RAVB_BE + tstamp_rx_ctrl: RAVB_RXTSTAMP_TYPE_V2_L2_EVENT => 0
q: RAVB_NC + tstamp_rx_ctrl: RAVB_RXTSTAMP_TYPE_V2_L2_EVENT => 1
q: RAVB_BE + tstamp_rx_ctrl: RAVB_RXTSTAMP_TYPE_ALL => 1
q: RAVB_NC + tstamp_rx_ctrl: RAVB_RXTSTAMP_TYPE_ALL => 1
The converted logic to use enum flags mapped tstamp_rx_ctrl as
0 to HWTSTAMP_FILTER_NONE
RAVB_RXTSTAMP_TYPE_V2_L2_EVENT to HWTSTAMP_FILTER_PTP_V2_L2_EVENT
RAVB_RXTSTAMP_TYPE_ALL to HWTSTAMP_FILTER_ALL
But the logic was incorrectly changed to:
q: RAVB_BE + tstamp_rx_ctrl: HWTSTAMP_FILTER_NONE => 1 (error)
q: RAVB_NC + tstamp_rx_ctrl: HWTSTAMP_FILTER_NONE => 0
q: RAVB_BE + tstamp_rx_ctrl: HWTSTAMP_FILTER_PTP_V2_L2_EVENT => 0
q: RAVB_NC + tstamp_rx_ctrl: HWTSTAMP_FILTER_PTP_V2_L2_EVENT => 1
q: RAVB_BE + tstamp_rx_ctrl: HWTSTAMP_FILTER_ALL => 1
q: RAVB_NC + tstamp_rx_ctrl: HWTSTAMP_FILTER_ALL => 0 (error)
This change restores the converted flag check to the correct logic of
the bit-wise driver specific flags.
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/linux-renesas-soc/aQ4xSv9629XF-Bt3@horms.kernel.org/
Fixes: 16e2e6cf75 ("net: ravb: Use common defines for time stamping control")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251107200100.3637869-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e871abcda3 ("random: handle creditable entropy from atomic
process context") added the use of workqueues, which meant testing
whether the workqueue is valid, but it did not remove the existing check
of whether static keys have been initialized. This static key check is
unnecessary because workqueues are initialized long after it. And
semantically it doesn't make much sense either, because it's not really
directly calling a static key function in the condition.
Remove the now unnecessary check.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
[Jason: rewrite commit message with different explanation, rebase on
random.git, and update code comment.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Add a comment to ptp_ocp_tty_show() explaining that the sysfs output
intentionally does not include a trailing newline. This is required for
backward compatibility with existing userspace software that reads the
sysfs attribute and uses the value directly as a device path.
A previous attempt to add a newline to align with common kernel
conventions broke userspace applications that were opening device paths
like "/dev/ttyS4\n" instead of "/dev/ttyS4", resulting in ENOENT errors.
This comment prevents future attempts to "fix" this behavior, which would
break existing userspace applications.
Link: https://lore.kernel.org/netdev/20251030124519.1828058-1-zhongqiu.han@oss.qualcomm.com/
Link: https://lore.kernel.org/netdev/aef3b850-5f38-4c28-a018-3b0006dc2f08@linux.dev/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251107074533.416048-1-zhongqiu.han@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
