The FRQCRB register on R-Car V3U, V4H and V4M do in addition to the
already supported KICK bit contain settings for the frequency division
ratios for the clocks ZTR, ZT, ZS and ZG. It is however not possible to
use the latter when registering a Z clock with the DEF_GEN4_Z() macro.
This change adds support for that by extending the existing practice of
treating the bit field offsets at multiples of 32 to map to a different
register. With this new mapping in palace
bit offsets 0 - 31 map to FRQCRC0
bit offsets 32 - 63 map to FRQCRC1
bit offsets 64 - 95 map to FRQCRB
The change also adds an error condition to return an error if an unknown
offset is used.
The KICK bit defined in FRQCRB and already supported covers all three
registers and no addition to how it is handled are needed.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251106211604.2766465-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the core clock used by the GPU on the Renesas R-Car V3U
(R8A779A0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251106211604.2766465-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The GBMD/SBMC interface on recent devices supports Rapid Charge mode
(charge_types: Fast) in addition to Conservation Mode (charge_types:
Long_Life).
Query the GBMD interface on probe to determine if a device supports
Rapid Charge. If so, expose these two modes while carefully maintaining
their mutually exclusive state, which aligns with the behavior of
manufacturer utilities on Windows.
Signed-off-by: Rong Zhang <i@rong.moe>
Acked-by: Ike Panhc <ikepanhc@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-By: Jelle van der Waa <jelle@vdwaa.nl>
Link: https://patch.msgid.link/20251105182832.104946-5-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some recent devices supports more charge_types. To properly support
these device without breaking the existing ones, we need to define
multiple power_supply_ext for different GBMD/SBMC interface revisions.
No functional change intended.
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20251105182832.104946-4-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The upcoming changes for Rapid Charge support require two consecutive
SBMC calls to switch charge_types. Hence, a mutex is required.
No functional change intended.
Signed-off-by: Rong Zhang <i@rong.moe>
Acked-by: Ike Panhc <ikepanhc@gmail.com>
Link: https://patch.msgid.link/20251105182832.104946-3-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rev.0.81 of the R-Car V4M Series Hardware User’s Manual removed the
"STPWT_EXTFXR" signal from the pin control register tables. As this is
further unused in the pin control driver, it can be removed safely.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/f849fa3b9b516e9dd04b45462b69f52225259480.1762274384.git.geert+renesas@glider.be
Rev.0.71 of the R-Car V4M Series Hardware User’s Manual removed the
"CC5_OSCOUT" signal from the pin control register tables. As this is
further unused in the pin control driver, it can be removed safely.
Signed-off-by: Huy Bui <huy.bui.wm@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/895bb560467309706931d14aeea0e063ad0e86eb.1762274384.git.geert+renesas@glider.be
Rev.1.30 of the R-Car V4H Series Hardware User’s Manual removed the
"STPWT_EXTFXR" signal from the pin control register tables. As this is
further unused in the pin control driver, it can be removed safely.
Signed-off-by: Huy Bui <huy.bui.wm@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/f6cfdbbc024d85e87583a1d57ea01582632f1216.1762274384.git.geert+renesas@glider.be
Rev.1.30 of the R-Car V4H Series Hardware User’s Manual removed the
"CC5_OSCOUT" signal from the pin control register tables. As this is
further unused in the pin control driver, it can be removed safely.
Signed-off-by: Huy Bui <huy.bui.wm@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/77f9efe5388f2801ace945b7793d4823618eeec8.1762274384.git.geert+renesas@glider.be
Rev.1.30 of the R-Car V4H Series Hardware User’s Manual removed the
"AVB[01]_MII_*" signals from the pin control register tables. As these
are further unused in the pin control driver, they can be removed
safely.
Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/58662f50136280532bcc8bbe94741d82425bd118.1762274384.git.geert+renesas@glider.be
The PCM stream data in USB-audio driver is transferred over USB URB
packet buffers, and each packet size is determined dynamically. The
packet sizes are limited by some factors such as wMaxPacketSize USB
descriptor. OTOH, in the current code, the actually used packet sizes
are determined only by the rate and the PPS, which may be bigger than
the size limit above. This results in a buffer overflow, as reported
by syzbot.
Basically when the limit is smaller than the calculated packet size,
it implies that something is wrong, most likely a weird USB
descriptor. So the best option would be just to return an error at
the parameter setup time before doing any further operations.
This patch introduces such a sanity check, and returns -EINVAL when
the packet size is greater than maxpacksize. The comparison with
ep->packsize[1] alone should suffice since it's always equal or
greater than ep->packsize[0].
Reported-by: syzbot+bfd77469c8966de076f7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bfd77469c8966de076f7
Link: https://lore.kernel.org/690b6b46.050a0220.3d0d33.0054.GAE@google.com
Cc: Lizhi Xu <lizhi.xu@windriver.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251109091211.12739-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The seq in struct key_params is for many ciphers, including CCMP, GCMP,
CMAC, GMAC. In addition to get_key(), it is also used when setting keys.
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251107142332.181308-1-m@xv97.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This will be needed for UHR operation parsing, and we
already pass whether or not the frame is an action
frame, replace that by the full type. Note this fixes
a few cases where 'false' was erroneously passed (mesh
and TDLS) and removes ieee802_11_parse_elems_crc() as
it's unused.
Link: https://patch.msgid.link/20251105160810.a476d20a6e01.Ie659535f9357f2f9a3c73f8c059ccfc96bf93b54@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In preparation for NAN interfaces using multiple channel
contexts, add an iterator macro that iterates all users
of a given channel context.
The logic during reserved assign/reassign handling the
bandwidth in ieee80211_get_chanctx_max_required_bw() is
a bit more complicated and should be cleaned up, so it
isn't yet converted.
Link: https://patch.msgid.link/20251105160431.5aaccc2f127d.I2b7fd0858a263916f43abab49c6d3cc0b5aa16ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Each link can currently use a chanctx and have another one
reserved, and both of these are also tracked backwards in
the assigned_links and reserved_links lists. If we consider
that there aren't *that* many links, this duplicate book-
keeping isn't necessary.
(I think it used to be necessary before the wiphy locking
changes, when chanctx_mtx existed, because we couldn't do
any interface iterations while holding only chanctx_mtx.)
Additionally, for NAN, we're going to want to track which
chanctxs are in use by the (group of) NAN interfaces. For
those, links don't really make sense as such, so chanctxs
need to be assigned to a different data structure.
Thus, as a first step, remove those back-lists of users
(right now only links) of each channel context. This is a
very basic conversion, ieee80211_vif_use_reserved_switch()
should made to iterate smarter.
Link: https://patch.msgid.link/20251105160431.dbeea1c42e76.I8d273c407274e1c05a4778aa20b56a9f326e87a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The current link iteration macros for_each_sdata_link() and
for_each_sdata_link_rcu() are various nested for loops, but
because they iterate all sdata instances and then all links
inside, using 'break' inside the iteration doesn't actually
break out of the whole iteration.
Make it work by tracking whether or not the inner iteration
(over links) actually completed, if it broke out then given
list_for_each_entry() it still iterates all sdata instances
but won't go into them.
Link: https://patch.msgid.link/20251105160431.c21956654fc0.I8d4739af061c44c57d172f19a15303a44ad1e596@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaQzbRwAKCRAdayaRccAa
ls8lAP9Dj1mOl+KTtajMvDnDTym4Sso9CaFP+5maFAv9CflAIwEA5QEtSwI9sMcH
ty8x9Y6TTuib+ns37i2jxR8cIt4jHwU=
=WA6M
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaRGyjgAKCRCRxhvAZXjc
okJ7AQDFRmoidpqHmRlvZQ3aismKkNHfx2k67QtRlX+YxDi8rQEAmmKyKUiX/SZV
39TroGfiJ5ytQuXwz3QxG/34cA+kAgQ=
=HqhX
-----END PGP SIGNATURE-----
Merge patch "kbuild: Add '-fms-extensions' to areas with dedicated CFLAGS"
Nathan Chancellor <nathan@kernel.org> says:
Shared branch between Kbuild and other trees for enabling
'-fms-extensions' for 6.19.
* tag 'kbuild-ms-extensions-6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Add '-fms-extensions' to areas with dedicated CFLAGS
Kbuild: enable -fms-extensions
jfs: Rename _inline to avoid conflict with clang's '-fms-extensions'
Link: https://patch.msgid.link/20251101-kbuild-ms-extensions-dedicated-cflags-v1-1-38004aba524b@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The setns() system call supports:
(1) namespace file descriptors (nsfd)
(2) process file descriptors (pidfd)
When using nsfds the namespaces will remain active because they are
pinned by the vfs. However, when pidfds are used things are more
complicated.
When the target task exits and passes through exit_nsproxy_namespaces()
or is reaped and thus also passes through exit_cred_namespaces() after
the setns()'ing task has called prepare_nsset() but before the active
reference count of the set of namespaces it wants to setns() to might
have been dropped already:
P1 P2
pid_p1 = clone(CLONE_NEWUSER | CLONE_NEWNET | CLONE_NEWNS)
pidfd = pidfd_open(pid_p1)
setns(pidfd, CLONE_NEWUSER | CLONE_NEWNET | CLONE_NEWNS)
prepare_nsset()
exit(0)
// ns->__ns_active_ref == 1
// parent_ns->__ns_active_ref == 1
-> exit_nsproxy_namespaces()
-> exit_cred_namespaces()
// ns_active_ref_put() will also put
// the reference on the owner of the
// namespace. If the only reason the
// owning namespace was alive was
// because it was a parent of @ns
// it's active reference count now goes
// to zero... --------------------------------
// |
// ns->__ns_active_ref == 0 |
// parent_ns->__ns_active_ref == 0 |
| commit_nsset()
-----------------> // If setns()
// now manages to install the namespaces
// it will call ns_active_ref_get()
// on them thus bumping the active reference
// count from zero again but without also
// taking the required reference on the owner.
// Thus we get:
//
// ns->__ns_active_ref == 1
// parent_ns->__ns_active_ref == 0
When later someone does ns_active_ref_put() on @ns it will underflow
parent_ns->__ns_active_ref leading to a splat from our asserts
thinking there are still active references when in fact the counter
just underflowed.
So resurrect the ownership chain if necessary as well. If the caller
succeeded to grab passive references to the set of namespaces the
setns() should simply succeed even if the target task exists or gets
reaped in the meantime and thus has dropped all active references to its
namespaces.
The race is rare and can only be triggered when using pidfs to setns()
to namespaces. Also note that active reference on initial namespaces are
nops.
Since we now always handle parent references directly we can drop
ns_ref_active_get_owner() when adding a namespace to a namespace tree.
This is now all handled uniformly in the places where the new namespaces
actually become active.
Link: https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-5-ae8a4ad5a3b3@kernel.org
Fixes: 3c9820d5c64a ("ns: add active reference count")
Reported-by: syzbot+1957b26299cf3ff7890c@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The mount namespace may in fact sleep when putting the last passive
reference so we need to drop the namespace reference outside of the rcu
read lock. Do this by delaying the put until the next iteration where
we've already moved on to the next namespace and legitimized it. Once we
drop the rcu read lock to call put_user() we will also drop the
reference to the previous namespace in the tree.
Link: https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-3-ae8a4ad5a3b3@kernel.org
Fixes: 76b6f5dfb3 ("nstree: add listns()")
Signed-off-by: Christian Brauner <brauner@kernel.org>
The LXA device trees are the only STM32MP1 device tree that specify
vusb_d/usb_a-supply and apparently not for good reason:
- vusb_d-supply (vdd_usb) is the same as the phy-supply for usbphyc_port1
- vusb_a-supply (reg18) is the same as vdda1v8-supply for usbphyc_port1
and usbphyc_port1 is linked to the usbotg_hs node via the phys property.
Specifying the regulators in the &usbotg_hs node is thus superfluous and
has been even found to be harmful in one instance:
Linux v6.10 was found to lock up every 50-125 or so reboots on the LXA
TAC when the DWC2 driver probe enables the regulators in bulk, unless
both properties were removed.
This issue was so far not reproducible on v6.17 (> 500 reboots), but as
these properties are unnecessary and different from other STM32MP1
boards, remove them anyway.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20251007-lxa-usb-dt-v1-1-cacde8088bb9@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix kernel-doc warnings so that there no other kernel-doc issues
in <uapi/linux/tee.h>:
- add ending ':' to some struct members as needed for kernel-doc
- change struct name in kernel-doc to match the actual struct name (2x)
- add a @params: kernel-doc entry multiple times
Warning: tee.h:265 struct member 'ret_origin' not described
in 'tee_ioctl_open_session_arg'
Warning: tee.h:265 struct member 'num_params' not described
in 'tee_ioctl_open_session_arg'
Warning: tee.h:265 struct member 'params' not described
in 'tee_ioctl_open_session_arg'
Warning: tee.h:351 struct member 'num_params' not described
in 'tee_iocl_supp_recv_arg'
Warning: tee.h:351 struct member 'params' not described
in 'tee_iocl_supp_recv_arg'
Warning: tee.h:372 struct member 'num_params' not described
in 'tee_iocl_supp_send_arg'
Warning: tee.h:372 struct member 'params' not described
in 'tee_iocl_supp_send_arg'
Warning: tee.h:298: expecting prototype for struct
tee_ioctl_invoke_func_arg. Prototype was for
struct tee_ioctl_invoke_arg instead
Warning: tee.h:473: expecting prototype for struct
tee_ioctl_invoke_func_arg. Prototype was for struct
tee_ioctl_object_invoke_arg instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Move st,adc-freq, st,mod-12b, st,ref-sel, and st,sample-time properties
from the touchscreen subnode to the parent touch@44 node. These properties
are defined in the st,stmpe.yaml schema for the parent node, not the
touchscreen subnode, resolving the validation error about unevaluated
properties.
Fixes: 27538a18a4 ("ARM: dts: stm32: add STM32MP1-based Phytec SoM")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250915224611.169980-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
After device_initialize() is called, use put_device() to release the
device according to kernel device management rules. While direct
kfree() work in this case, using put_device() is more correct.
Found by code review.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251110005158.13394-1-make24@iscas.ac.cn
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The CSI-2 receivers in the i.MX8MP have 3 output channels. Specify this
in the device tree, to enable support for more than one channel.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
