Add a test to verify that skb metadata remains accessible after calling
bpf_skb_adjust_room(), which modifies the packet headroom and can trigger
head reallocation.
The helper expects an Ethernet frame carrying an IP packet so switch test
packet identification by source MAC address since we can no longer rely on
Ethernet proto being set to zero.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-14-5ceb08a9b37b@cloudflare.com
Add a test to verify that skb metadata remains accessible after calling
bpf_skb_vlan_push() and bpf_skb_vlan_pop(), which modify the packet
headroom.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-13-5ceb08a9b37b@cloudflare.com
Since pskb_expand_head() no longer clears metadata on unclone, update tests
for cloned packets to expect metadata to remain intact.
Also simplify the clone_dynptr_kept_on_{data,meta}_slice_write tests.
Creating an r/w dynptr slice is sufficient to trigger an unclone in the
prologue, so remove the extraneous writes to the data/meta slice.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-12-5ceb08a9b37b@cloudflare.com
Add diagnostic output when metadata verification fails to help with
troubleshooting test failures. Introduce a check_metadata() helper that
prints both expected and received metadata to the BPF program's stderr
stream on mismatch. The userspace test reads and dumps this stream on
failure.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-11-5ceb08a9b37b@cloudflare.com
Move metadata verification into the BPF TC programs. Previously,
userspace read metadata from a map and verified it once at test end.
Now TC programs compare metadata directly using __builtin_memcmp() and
set a test_pass flag. This enables verification at multiple points during
test execution rather than a single final check.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-10-5ceb08a9b37b@cloudflare.com
Although bpf_skb_change_head() doesn't move packet data after skb_push(),
skb metadata still needs to be relocated. Use the dedicated helper to
handle it.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-9-5ceb08a9b37b@cloudflare.com
bpf_skb_change_proto reuses the same headroom operations as
bpf_skb_adjust_room, already updated to handle metadata safely.
The remaining step is to ensure that there is sufficient headroom to
accommodate metadata on skb_push().
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-8-5ceb08a9b37b@cloudflare.com
bpf_skb_adjust_room() may push or pull bytes from skb->data. In both cases,
skb metadata must be moved accordingly to stay accessible.
Replace existing memmove() calls, which only move payload, with a helper
that also handles metadata. Reserve enough space for metadata to fit after
skb_push.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-7-5ceb08a9b37b@cloudflare.com
Use the metadata-aware helper to move packet bytes after skb_push(),
ensuring metadata remains valid after calling the BPF helper.
Also, take care to reserve sufficient headroom for metadata to fit.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-6-5ceb08a9b37b@cloudflare.com
Currently bpf_dynptr_from_skb_meta() marks the dynptr as read-only when
the skb is cloned, preventing writes to metadata.
Remove this restriction and unclone the skb head on bpf_dynptr_write() to
metadata, now that the metadata is preserved during uncloning. This makes
metadata dynptr consistent with skb dynptr, allowing writes regardless of
whether the skb is cloned.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-3-5ceb08a9b37b@cloudflare.com
pskb_expand_head() copies headroom, including skb metadata, into the newly
allocated head, but then clears the metadata. As a result, metadata is lost
when BPF helpers trigger an skb head reallocation.
Let the skb metadata remain in the newly created copy of head.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-2-5ceb08a9b37b@cloudflare.com
Lay groundwork for fixing BPF helpers available to TC(X) programs.
When skb_push() or skb_pull() is called in a TC(X) ingress BPF program, the
skb metadata must be kept in front of the MAC header. Otherwise, BPF
programs using the __sk_buff->data_meta pseudo-pointer lose access to it.
Introduce a helper that moves both metadata and a specified number of
packet data bytes together, suitable as a drop-in replacement for
memmove().
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-1-5ceb08a9b37b@cloudflare.com
From https://lore.kernel.org/linux-nfs/aQHASIumLJyOoZGH@infradead.org/
On Wed, Oct 29, 2025 at 12:20:40AM -0700, Christoph Hellwig wrote:
> On Mon, Oct 27, 2025 at 12:18:30PM -0400, Mike Snitzer wrote:
> > LOCALIO's misaligned DIO will issue head/tail followed by O_DIRECT
> > middle (via AIO completion of that aligned middle). So out of order
> > relative to file offset.
>
> That's in general a really bad idea. It will obviously work, but
> both on SSDs and out of place write file systems it is a sure way
> to increase your garbage collection overhead a lot down the line.
Fix this by never issuing misaligned DIO out of order. This fix means
the DIO-aligned middle will only use AIO completion if there is no
misaligned end segment. Otherwise, all 3 segments of a misaligned DIO
will be issued without AIO completion to ensure file offset increases
properly for all partial READ or WRITE situations.
Factoring out nfs_local_iter_setup() helps standardize repetitive
nfs_local_iters_setup_dio() code and is inspired by cleanup work that
Chuck Lever did on the NFSD Direct code.
Fixes: c817248fc8 ("nfs/localio: add proper O_DIRECT support for READ and WRITE")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Add a dedicated runtime register list for GFX ver >= 35.
Compared to the list for GFX >= 30, this variant drops
HUC_KERNEL_LOAD_INFO, MIRROR_FUSE1 and adds SERVICE_COPY_ENABLE.
v2:
- drop MIRROR_FUSE1 register
- update commit message
Fixes: 5e0de2dfbc ("drm/xe/cri: Add CRI platform definition")
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251107211845.3633633-1-piotr.piorkowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add OP-TEE based RPMB support for UFS devices. This enables secure RPMB
operations on UFS devices through OP-TEE, providing the same
functionality available for eMMC devices and extending kernel-based
secure storage support to UFS-based systems.
Benefits of OP-TEE based RPMB implementation:
- Eliminates dependency on userspace supplicant for RPMB access
- Enables early boot secure storage access (e.g., fTPM, secure UEFI
variables)
- Provides kernel-level RPMB access as soon as UFS driver is
initialized
- Removes complex initramfs dependencies and boot ordering requirements
- Ensures reliable and deterministic secure storage operations
- Supports both built-in and modular fTPM configurations
[mkp: make this build as a module]
Co-developed-by: Can Guo <can.guo@oss.qualcomm.com>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://patch.msgid.link/20251107230518.4060231-4-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Apply WA_14024681466 to Xe3_LPG graphics IP versions from 30.00 to 30.05.
v2: (Matthew Roper)
- Remove stepping filter as workaround applies to all steppings.
- Add an engine class filter so it only applies to the RENDER engine.
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20251027092643.335904-1-nitin.r.gote@intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 071089a69e)
Cc: stable@vger.kernel.org # v6.16+
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The snprintf() calls here work but they have several minor style issues:
1) It uses ARRAY_SIZE() which is the number of elements in an array.
Since were talking about char that works, but it's more common to
use sizeof() which is the number of bytes.
2) The printf format is "%1d". The "1" ensures we always print at
least 1 character but since numbers all have at least 1 digit this
can be removed.
3) The kernel implementation of snprintf() cannot return negative error
codes. Also these particular calls to snprintf() can't return zero
and the code to handle that zero return is sort of questionable.
4) In the current kernel the only "core_id" we print is "0" but if it
was more than 9 then the output would be truncated so GCC complains.
Add an "a >= sizeof(scp_fw_file)" check for output which is too long.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/aP8agyKj73bLZrTQ@stanley.mountain
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The function ufshcd_read_string_desc() was duplicating memory starting
from the beginning of struct uc_string_id, which included the length and
type fields. As a result, the allocated buffer contained unwanted
metadata in addition to the string itself.
The correct behavior is to duplicate only the Unicode character array in
the structure. Update the code so that only the actual string content is
copied into the new buffer.
Fixes: 5f57704dbc ("scsi: ufs: Use kmemdup in ufshcd_read_string_desc()")
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://patch.msgid.link/20251107230518.4060231-3-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Convert SD_ASCII_STD and SD_RAW from boolean macros to enum values for
improved code readability. This makes ufshcd_read_string_desc() calls
self-documenting by using explicit enum values instead of true/false.
Move the ufshcd_read_string_desc() declaration from include/ufs/ufshcd.h
to drivers/ufs/core/ufshcd-priv.h since this function is not exported.
Co-developed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Suggested-by: Avri Altman <Avri.Altman@sandisk.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://patch.msgid.link/20251107230518.4060231-2-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The WMI driver core only supports GUID strings containing only
uppercase characters, however the GUID string used by the
msi-wmi-platform driver contains a single lowercase character.
This prevents the WMI driver core from matching said driver to
its WMI device.
Fix this by turning the lowercase character into a uppercase
character. Also update the WMI driver development guide to warn
about this.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Fixes: 9c0beb6b29 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251110111253.16204-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turns out that the GUID used by the msi-wmi-platform driver
(ABBC0F60-8EA1-11D1-00A0-C90629100000) is not unique, but was instead
copied from the WIndows Driver Samples. This means that this driver
could load on devices from other manufacturers that also copied this
GUID, potentially causing hardware errors.
Prevent this by only loading on devices whitelisted via DMI. The DMI
matches where taken from the msi-ec driver.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Fixes: 9c0beb6b29 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251110111253.16204-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With SG_TILE_ADDR_RANGE use, the only thing requiring GT forcewake while
probing for vram size is the get_flat_ccs_offset(). Move the forcewake
down where it's needed.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251107-tile-addr-v1-2-a3014aadc2e7@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The TILE_ADDR_RANGE register is not available on all platforms going
forward as it was deprecated and is being replaced by equivalent
registers within SoC MMIO space. While that doesn't happen, the
SG_TILE_ADDR_RANGE (base 0x1083a0) is still valid for all platforms
supported by xe. Use that instead.
BSpec: 59353, 54991
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251107-tile-addr-v1-1-a3014aadc2e7@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
- Fix trapping regression when no in-kernel irqchip is present
- Check host-provided, untrusted ranges and offsets in pKVM
- Fix regression restoring the ID_PFR1_EL1 register
- Fix vgic ITS locking issues when LPIs are not directly injected
Arm selftests:
- Correct target CPU programming in vgic_lpi_stress selftest
- Fix exposure of SCTLR2_EL2 and ZCR_EL2 in get-reg-list selftest
RISC-V:
- Fix check for local interrupts on riscv32
- Read HGEIP CSR on the correct cpu when checking for IMSIC interrupts
- Remove automatic I/O mapping from kvm_arch_prepare_memory_region()
x86:
- Inject #UD if the guest attempts to execute SEAMCALL or TDCALL as KVM
doesn't support virtualization the instructions, but the instructions
are gated only by VMXON. That is, they will VM-Exit instead of taking
a #UD and until now this resulted in KVM exiting to userspace with an
emulation error.
- Unload the "FPU" when emulating INIT of XSTATE features if and only if
the FPU is actually loaded, instead of trying to predict when KVM will
emulate an INIT (CET support missed the MP_STATE path). Add sanity
checks to detect and harden against similar bugs in the future.
- Unregister KVM's GALog notifier (for AVIC) when kvm-amd.ko is unloaded.
- Use a raw spinlock for svm->ir_list_lock as the lock is taken during
schedule(), and "normal" spinlocks are sleepable locks when PREEMPT_RT=y.
- Remove guest_memfd bindings on memslot deletion when a gmem file is dying
to fix a use-after-free race found by syzkaller.
- Fix a goof in the EPT Violation handler where KVM checks the wrong
variable when determining if the reported GVA is valid.
- Fix and simplify the handling of LBR virtualization on AMD, which was made
buggy and unnecessarily complicated by nested VM support
Misc:
- Update Oliver's email address
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmkQSAAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMDzQf9GW6F8yAo1QTnLNfSIvHMQcJAKwr3
pd+bOLtMN/OzdQO/dvGVdkYuYYg/PQv/+zw6dVIeiLjtlrsTg40rsqVZEAXYCsbB
q7TFM634thgON6R6fD6eLa+72UP0wMai7xqEfEyXVW3enAEEe+lrPWC9BiwJRqKZ
pY1MpVIdYa0XNfUBeiOhO5AH+y9OmUDq5AHptrYn9X5xdsU2OWqQCyHW/1RLPWvA
9bkyuz1A8+EQ20ngHUd0hrQx4UeJ7jvPblbryUxXaMwqahPC9sA2iDI12gAu8a84
skvWbIPHSMgj5qDO/CkAsHb47GiqudU4LH7LniDZNsq21iTekiURSbdklw==
=SM6O
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Fix trapping regression when no in-kernel irqchip is present
- Check host-provided, untrusted ranges and offsets in pKVM
- Fix regression restoring the ID_PFR1_EL1 register
- Fix vgic ITS locking issues when LPIs are not directly injected
Arm selftests:
- Correct target CPU programming in vgic_lpi_stress selftest
- Fix exposure of SCTLR2_EL2 and ZCR_EL2 in get-reg-list selftest
RISC-V:
- Fix check for local interrupts on riscv32
- Read HGEIP CSR on the correct cpu when checking for IMSIC
interrupts
- Remove automatic I/O mapping from kvm_arch_prepare_memory_region()
x86:
- Inject #UD if the guest attempts to execute SEAMCALL or TDCALL as
KVM doesn't support virtualization the instructions, but the
instructions are gated only by VMXON. That is, they will VM-Exit
instead of taking a #UD and until now this resulted in KVM exiting
to userspace with an emulation error.
- Unload the "FPU" when emulating INIT of XSTATE features if and only
if the FPU is actually loaded, instead of trying to predict when
KVM will emulate an INIT (CET support missed the MP_STATE path).
Add sanity checks to detect and harden against similar bugs in the
future.
- Unregister KVM's GALog notifier (for AVIC) when kvm-amd.ko is
unloaded.
- Use a raw spinlock for svm->ir_list_lock as the lock is taken
during schedule(), and "normal" spinlocks are sleepable locks when
PREEMPT_RT=y.
- Remove guest_memfd bindings on memslot deletion when a gmem file is
dying to fix a use-after-free race found by syzkaller.
- Fix a goof in the EPT Violation handler where KVM checks the wrong
variable when determining if the reported GVA is valid.
- Fix and simplify the handling of LBR virtualization on AMD, which
was made buggy and unnecessarily complicated by nested VM support
Misc:
- Update Oliver's email address"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: nSVM: Fix and simplify LBR virtualization handling with nested
KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv()
KVM: SVM: Mark VMCB_LBR dirty when MSR_IA32_DEBUGCTLMSR is updated
MAINTAINERS: Switch myself to using kernel.org address
KVM: arm64: vgic-v3: Release reserved slot outside of lpi_xa's lock
KVM: arm64: vgic-v3: Reinstate IRQ lock ordering for LPI xarray
KVM: arm64: Limit clearing of ID_{AA64PFR0,PFR1}_EL1.GIC to userspace irqchip
KVM: arm64: Set ID_{AA64PFR0,PFR1}_EL1.GIC when GICv3 is configured
KVM: arm64: Make all 32bit ID registers fully writable
KVM: VMX: Fix check for valid GVA on an EPT violation
KVM: guest_memfd: Remove bindings on memslot deletion when gmem is dying
KVM: SVM: switch to raw spinlock for svm->ir_list_lock
KVM: SVM: Make avic_ga_log_notifier() local to avic.c
KVM: SVM: Unregister KVM's GALog notifier on kvm-amd.ko exit
KVM: SVM: Initialize per-CPU svm_data at the end of hardware setup
KVM: x86: Call out MSR_IA32_S_CET is not handled by XSAVES
KVM: x86: Harden KVM against imbalanced load/put of guest FPU state
KVM: x86: Unload "FPU" state on INIT if and only if its currently in-use
KVM: arm64: Check the untrusted offset in FF-A memory share
KVM: arm64: Check range args for pKVM mem transitions
...
"struct sdca_control" declares "values" field as integer array.
But the memory allocated to it is of char array. This causes
crash for sdca_parse_function API. This patch addresses the
issue by allocating correct data size.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251110152646.192-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
assert_rcu_or_wq_mutex_or_pool_mutex is never referenced in the code.
Just remove it.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
LOCALIO's misaligned DIO WRITE support requires synchronous IO for any
misaligned head and/or tail that are issued using buffered IO. In
addition, it is important that the O_DIRECT middle be on stable
storage upon its completion via AIO.
Otherwise, a misaligned DIO WRITE could mix buffered IO for the
head/tail and direct IO for the DIO-aligned middle -- which could lead
to problems associated with deferred writes to stable storage (such as
out of order partial completions causing incorrect advancement of the
file's offset, etc).
Fixes: c817248fc8 ("nfs/localio: add proper O_DIRECT support for READ and WRITE")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Misaligned DIO read can be split into 3 IOs, must handle potential for
short read from each component IO (follows same pattern used for
handling partial writes, except upper layer read code handles advancing
offset before retry).
Fixes: c817248fc8 ("nfs/localio: add proper O_DIRECT support for READ and WRITE")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Improve completion handling of as many as 3 IOs associated with each
misaligned DIO by using a atomic_t to track completion of each IO.
Update nfs_local_pgio_done() to use precise atomic_t accounting for
remaining iov_iter (up to 3) associated with each iocb, so that each
NFS LOCALIO pgio header is only released after all IOs have completed.
But also allow early return if/when a short read or write occurs.
Fixes reported BUG: KASAN: slab-use-after-free in nfs_local_call_read:
https://lore.kernel.org/linux-nfs/aPSvi5Yr2lGOh5Jh@dell-per750-06-vm-07.rhts.eng.pek2.redhat.com/
Reported-by: Yongcheng Yang <yoyang@redhat.com>
Fixes: c817248fc8 ("nfs/localio: add proper O_DIRECT support for READ and WRITE")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Each filesystem is meant to fallback to retrying DIO in terms buffered
IO when it might encounter -ENOTBLK when issuing DIO (which can happen
if the VFS cannot invalidate the page cache).
So NFS doesn't need special handling for -ENOTBLK.
Also, explicitly initialize a couple DIO related iocb members rather
than simply rely on data structure zeroing.
Fixes: c817248fc8 ("nfs/localio: add proper O_DIRECT support for READ and WRITE")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
If the TLS security policy is of type RPC_XPRTSEC_TLS_X509, then the
cert_serial and privkey_serial fields need to match as well since they
define the client's identity, as presented to the server.
Fixes: 90c9550a8d ("NFS: support the kernel keyring for TLS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
The default setting for the transport security policy must be
RPC_XPRTSEC_NONE, when using a TCP or RDMA connection without TLS.
Conversely, when using TLS, the security policy needs to be set.
Fixes: 6c0a8c5fcf ("NFS: Have struct nfs_client carry a TLS policy field")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Don't try to add an RDMA transport to a client that is already marked as
being a TCP/TLS transport.
Fixes: a35518cae4 ("NFSv4.1/pnfs: fix NFS with TLS in pnfs")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Don't try to add an RDMA transport to a client that is already marked as
being a TCP/TLS transport.
Fixes: 04a1526366 ("pnfs/flexfiles: connect to NFSv3 DS using TLS if MDS connection uses TLS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Voluntering as a reviewer for Module support.
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
First, we can't assume pipe == crtc index. If a pipe is fused off in
between, it no longer holds. intel_crtc_for_pipe() is the only proper
way to get from a pipe to the corresponding crtc.
Second, drivers aren't supposed to access or index drm->vblank[]
directly. There's drm_crtc_vblank_crtc() for this.
Use both functions to fix the pipe to vblank conversion.
Fixes: f02658c46c ("drm/i915/psr: Add mechanism to notify PSR of pipe enable/disable")
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: stable@vger.kernel.org # v6.16+
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251106200000.1455164-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 2750f6765d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This commit addresses a memleak issue of panthor_vma (or drm_gpuva)
structure in Panthor driver, that can happen if the GPU page table
update operation to map the pages fail.
The issue is very unlikely to occur in practice.
v2: Add panthor_vm_op_ctx_return_vma() helper (Boris)
v3: Add WARN_ON_ONCE (Boris)
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251021081042.1377406-1-akash.goel@arm.com
In the atomic update callback, ast should call
drm_gem_fb_begin_cpu_access() to make sure it can read the
framebuffer from the CPU, otherwise the data might not be there due
to cache, and synchronization.
Tested on a Lenovo SE100, while rendering on the ArrowLake GPU with
i915 driver, and using ast for display.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251030091627.340780-1-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
The R-Car Gen3 thermal driver supports both R-Car Gen3 and Gen4 SoCs
as well as RZ/G2. Update the driver comment. No functional change.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251110143029.10940-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The shmem layer zeroes out the new pages using cached mappings, and if
we don't CPU-flush we might leave dirty cachelines behind, leading to
potential data leaks and/or asynchronous buffer corruption when dirty
cachelines are evicted.
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251107171214.1186299-1-boris.brezillon@collabora.com
Christian Brauner <brauner@kernel.org> says:
* Make sure to initialize the active reference count for the initial
network namespace and prevent __ns_common_init() from returning too
early.
* Make sure that passive reference counts are dropped outside of rcu
read locks as some namespaces such as the mount namespace do in fact
sleep when putting the last reference.
* The setns() system call supports:
(1) namespace file descriptors (nsfd)
(2) process file descriptors (pidfd)
When using nsfds the namespaces will remain active because they are
pinned by the vfs. However, when pidfds are used things are more
complicated.
When the target task exits and passes through exit_nsproxy_namespaces()
or is reaped and thus also passes through exit_cred_namespaces() after
the setns()'ing task has called prepare_nsset() but before the active
reference count of the set of namespaces it wants to setns() to might
have been dropped already:
P1 P2
pid_p1 = clone(CLONE_NEWUSER | CLONE_NEWNET | CLONE_NEWNS)
pidfd = pidfd_open(pid_p1)
setns(pidfd, CLONE_NEWUSER | CLONE_NEWNET | CLONE_NEWNS)
prepare_nsset()
exit(0)
// ns->__ns_active_ref == 1
// parent_ns->__ns_active_ref == 1
-> exit_nsproxy_namespaces()
-> exit_cred_namespaces()
// ns_active_ref_put() will also put
// the reference on the owner of the
// namespace. If the only reason the
// owning namespace was alive was
// because it was a parent of @ns
// it's active reference count now goes
// to zero... --------------------------------
// |
// ns->__ns_active_ref == 0 |
// parent_ns->__ns_active_ref == 0 |
| commit_nsset()
-----------------> // If setns()
// now manages to install the namespaces
// it will call ns_active_ref_get()
// on them thus bumping the active reference
// count from zero again but without also
// taking the required reference on the owner.
// Thus we get:
//
// ns->__ns_active_ref == 1
// parent_ns->__ns_active_ref == 0
When later someone does ns_active_ref_put() on @ns it will underflow
parent_ns->__ns_active_ref leading to a splat from our asserts
thinking there are still active references when in fact the counter
just underflowed.
So resurrect the ownership chain if necessary as well. If the caller
succeeded to grab passive references to the set of namespaces the
setns() should simply succeed even if the target task exists or gets
reaped in the meantime.
The race is rare and can only be triggered when using pidfs to setns()
to namespaces. Also note that active reference on initial namespaces are
nops.
Since we now always handle parent references directly we can drop
ns_ref_active_get_owner() when adding a namespace to a namespace tree.
This is now all handled uniformly in the places where the new namespaces
actually become active.
* patches from https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-0-ae8a4ad5a3b3@kernel.org:
selftests/namespaces: test for efault
selftests/namespaces: add active reference count regression test
ns: add asserts for active refcount underflow
ns: handle setns(pidfd, ...) cleanly
ns: return EFAULT on put_user() error
ns: make sure reference are dropped outside of rcu lock
ns: don't increment or decrement initial namespaces
ns: don't skip active reference count initialization
Link: https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-0-ae8a4ad5a3b3@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Export symbols for reading/writing WMI symbols using a namespace.
Existing functions:
- asus_wmi_evaluate_method
- asus_wmi_set_devstate
New function:
- asus_wmi_get_devstate_dsts
The new function is intended for use with DSTS WMI method only and
avoids requiring the asus_wmi driver data to select the WMI method.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20251102215319.3126879-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In several functions we declare local struct slab variables so we can
work with the freelist and counters fields (including the sub-counters
that are in the union) comfortably.
With struct freelist_counters containing the full counters definition,
we can now reduce the local variables to that type as we don't need the
other fields in struct slab.
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
