With the new mount API all option parsing will need to happen
in fs/v9fs.c, so move some existing data structures and macros
to header files to facilitate this. Rename some to reflect
the transport they are used for (rdma, fd, etc), for clarity.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Message-ID: <20251010214222.1347785-3-sandeen@redhat.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
296b67059 removed fsparam_u32hex because there were no callers
(yet) and it didn't build due to using the nonexistent symbol
fs_param_is_u32_hex.
fs/9p will need this parser, so add it back with the appropriate
fix (use fs_param_is_u32).
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Message-ID: <20251010214222.1347785-2-sandeen@redhat.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
We already know that "retval" is negative, so there is no need to check
again. Also the statement is not indented far enough. Delete it.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 43c36a56cc ("Revert "fs/9p: Refresh metadata in d_revalidate for uncached mode too"")
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <aPtiSJl8EwSfVvqN@stanley.mountain>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
When page cache is used, writebacks are done on a page granularity, and it
is expected that the underlying filesystem (such as v9fs) should respect
the write position. However, currently v9fs will passthrough O_APPEND to
the server even on cached mode. This causes data corruption if a sync or
fstat gets between two writes to the same file.
This patch removes the APPEND flag from the open request we send to the
server when writeback caching is involved. I believe keeping server-side
APPEND is probably fine for uncached mode (even if two fds are opened, one
without O_APPEND and one with it, this should still be fine since they
would use separate fid for the writes).
Signed-off-by: Tingmao Wang <m@maowtm.org>
Fixes: 4eb3117888 ("fs/9p: Rework cache modes and add new options to Documentation")
Message-ID: <20251102235631.8724-1-m@maowtm.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
'->def' is only ever used as a true/false flag
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-ID: <20251103-v9fs_trans_def_bool-v1-1-f33dc7ed9e81@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
While developing a 9P server (https://github.com/Barre/ZeroFS) and
testing it under high-load, I was running into allocation failures.
The failures occur even with plenty of free memory available because
kmalloc requires contiguous physical memory.
This results in errors like:
ls: page allocation failure: order:7, mode:0x40c40(GFP_NOFS|__GFP_COMP)
This patch introduces a transport capability flag (supports_vmalloc)
that indicates whether a transport can work with vmalloc'd buffers
(non-physically contiguous memory). Transports requiring DMA should
leave this flag as false.
The fd-based transports (tcp, unix, fd) set this flag to true, and
p9_fcall_init will use kvmalloc instead of kmalloc for these
transports. This allows the allocator to fall back to vmalloc when
contiguous physical memory is not available.
Additionally, if kmem_cache_alloc fails, the code falls back to
kvmalloc for transports that support it.
Signed-off-by: Pierre Barre <pierre@barre.sh>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <d2017c29-11fb-44a5-bd0f-4204329bbefb@app.fastmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Add a RK3288 compatible for a version of the Rockchip VDEC IP that only
support HEVC decoding.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, RockPro64, Quartz64-B, NanoPi R5S
Tested-by: Detlev Casanova <detlev.casanova@collabora.com> # RK3399
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The RK3328 VDEC has a HW quirk that require QoS to be disabled when HEVC
or VP9 is decoded, otherwise the decoded picture may become corrupted.
Add a RK3328 variant with a quirk flag to disable QoS when before
decoding is started.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, RockPro64, Quartz64-B, NanoPi R5S
Tested-by: Detlev Casanova <detlev.casanova@collabora.com> # RK3399
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a RK3288 variant, a version of the Rockchip VDEC IP that only
support HEVC decoding.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, RockPro64, Quartz64-B, NanoPi R5S
Tested-by: Detlev Casanova <detlev.casanova@collabora.com> # RK3399
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add filtering of coded formats and controls depending on a variant
capabilities.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, RockPro64, Quartz64-B, NanoPi R5S
Tested-by: Detlev Casanova <detlev.casanova@collabora.com> # RK3399
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Different versions of the Rockchip VDEC IP exists and one way they can
differ is what decoding formats are supported.
Add a variant implementation in order to support flagging different
capabilities.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, RockPro64, Quartz64-B, NanoPi R5S
Tested-by: Detlev Casanova <detlev.casanova@collabora.com> # RK3399
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Rockchip VDEC supports the HEVC codec with the Main and Main10
Profile up to Level 5.1 High tier: 4096x2304@60 fps.
Add the backend for HEVC format to the decoder.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, RockPro64, Quartz64-B, NanoPi R5S
Tested-by: Detlev Casanova <detlev.casanova@collabora.com> # RK3399
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
gt_reset() doesn't make sense by itself: it can only be called as part
of the worker. Inline it there to avoid it being called from elsewhere
and clarify the gt_reset() vs do_gt_reset() paths. Note that the error
return from gt_reset() was just being ignored.
Also add a comment to the xe_pm_runtime_put() to make sure the
get()/put() pair is clear.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251031222244.37735-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In the past two years, I have focused on EROFS and contributed features
including the reserved buffer pool, configurable global buffer pool, and
the ongoing direct I/O support for compressed data.
I would like to continue contributing to EROFS and help with code
reviews. Please CC me on EROFS-related changes.
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Acked-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Mike Christie <michael.christie@oracle.com> says:
The following patches were made over Linus tree. They fix/improve the
stats used in the main IO path. The first patch fixes an issue where
I made some stats u32 when they should have stayed u64. The rest of
the patches improve the handling of RW/num_cmds stats to reduce code
duplication and improve performance.
Link: https://patch.msgid.link/20250917221338.14813-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The atomic use in the main I/O path is causing perf issues when using
higher performance backend devices and multiple queues (more than
10 when using vhost-scsi) like with this fio workload:
[global]
bs=4K
iodepth=128
direct=1
ioengine=libaio
group_reporting
time_based
runtime=120
name=standard-iops
rw=randread
numjobs=16
cpus_allowed=0-15
To fix this issue, move the LUN stats to per CPU.
Note: I forgot to include this patch with the delayed/ordered per CPU
tracking and per device/device entry per CPU stats. With this patch you
get the full 33% improvements when using fast backends, multiple queues
and multiple IO submiters.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20250917221338.14813-4-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create some macros to reduce code duplication for when we handle per-CPU
stats. Convert the existing LUN and auth cases.
Note: This is similar to percpu_counters but they only support s64 since
they are also used for non-stat counters where you need to handle/prevent
rollover more gracefully. Our use is just for stats where the spec
defines u64 use plus we already have some files exporting u64 values so
it's not possible to directly use percpu_counters.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20250917221338.14813-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit 9cf2317b79 ("scsi: target: Move I/O path stats to per CPU")
I saw we sometimes use %u and also misread the spec. As a result I
thought all the stats were supposed to be 32-bit only. However, for the
majority of cases we support currently, the spec specifies u64 bit
stats. This patch converts the stats changed in the commit above to u64.
Fixes: 9cf2317b79 ("scsi: target: Move I/O path stats to per CPU")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20250917221338.14813-2-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Check whether or not the conversion of the argument to an integer
succeeded. Reject invalid timeout values.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031221844.2921694-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace Stanley Chu with me and Chaotian in the maintainers field since
Stanley's email address is no longer active.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251031122008.1517549-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the stack buffer 'buf'. This patch does not modify the output
produced by target_lu_gp_members_show().
An example of the output that is produced with this patch applied:
$ cat /sys/kernel/config/target/core/alua/lu_gps/default_lu_gp/members
fileio_0/vdev0
fileio_1/vdev1
iblock_0/vdev2
$ od -c /sys/kernel/config/target/core/alua/lu_gps/default_lu_gp/members
0000000 f i l e i o _ 0 / v d e v 0 \n f
0000020 i l e i o _ 1 / v d e v 1 \n i b
0000040 l o c k _ 0 / v d e v 2 \n
0000055
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251027184639.3501254-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
NUL characters are not allowed in ASCII configfs output. Hence this
patch.
Fixes: c66ac9db8d ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251027184639.3501254-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry <john.g.garry@oracle.com> says:
This is a reposting of Mike's atomic writes support for the SCSI
target.
Again, we are now only supporting target_core_iblock. It's implemented
similar to UNMAP where we do not do any emulation and instead pass the
operation to the block layer.
Link: https://patch.msgid.link/20251020103820.2917593-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make target_core_iblock use the LIO helper function to translate its
block_device atomic settings to LIO settings. If we then get a write
that LIO has indicated is atomic via the SCF_ATOMIC flag, we use the
REQ_ATOMIC flag to tell the block layer to perform an atomic write.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-8-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Report if the device supports WRITE_ATOMIC_16 in the
REPORT_SUPPORTED_OPERATION_CODES command.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-7-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Report the atomic values in the Block Limits VPD page.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
jpg: handle not having atomic_supported attribute
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-6-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the core LIO code to process the WRITE_ATOMIC_16 command.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
jpg: fix return code from sbc_check_atomic, reformat
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-5-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a helper function that sets up the atomic value based on a
block_device similar to what we do for unmap.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
jpg: Set atomic alignment, drop atomic_supported reference
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-4-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add atomic fields to the se_device and export them in configfs.
Initially only target_core_iblock will be supported and we will inherit
all the settings from the block layer.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
jpg: Stop being allowed to configure atomic write alignment,
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-3-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename target_configure_unmap_from_queue() to
target_configure_unmap_from_bdev() since it now takes a bdev.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251020103820.2917593-2-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for RT9756 smart cap divider charger.
The RT9759 is a high efficiency and high charge current charger. The
maximum charge current is up to 8A. It integrates a dual-phase charge
pump core with ADC monitoring.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/f682812069b6be2138bfdae2ff9a9c84994d5b64.1761894605.git.cy_huang@richtek.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This driver implements poweroff/reboot support for the SpacemiT P1 PMIC
chip, which is commonly paired with the SpacemiT K1 SoC.
The SpacemiT P1 support is implemented as a MFD driver, so the access is
done directly through the regmap interface. Reboot or poweroff is
triggered by setting a specific bit in a control register, which is
automatically cleared by the hardware afterwards.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Link: https://patch.msgid.link/20251102230352.914421-2-aurelien@aurel32.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Mirroring drivers/macintosh/apm_emu.c, this means that
modprobe apm_power && modprobe $anotherdriver && modprobe -r apm_power
leaves $anotherdriver's apm_get_power_status instead of deleting it.
Fixes: 3788ec932b ("[BATTERY] APM emulation driver for class batteries")
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Link: https://patch.msgid.link/xczpgox57hxbunkcbdl5fxhc4gnsajsipldfidi7355afezk64@tarta.nabijaczleweli.xyz
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The build of intel_dc_ti_battery module on i386 (32-bit) fails with
ERROR: modpost: "__udivdi3" [drivers/power/supply/intel_dc_ti_battery.ko]
This is caused by 64-bit division of ktime values by NSEC_PER_USEC. Use
ktime_divns() helper which handles the division correctly on 32-bit
architectures.
Fixes: 8c5795fe55 ("power: supply: Add new Intel Dollar Cove TI battery driver")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251015075957.8F40620057@lion.mk-sys.cz
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Clean up grammar, punctuation, etc., in the power supply class
documentation.
Add article adjectives where needed.
Hyphenate some adjectives.
Fix punctuation.
Fix some verb usage (singular/plural).
Fix run-on sentences.
Add "is" in a few places.
Change "QA" to "Q&A".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://patch.msgid.link/20251014182008.823980-1-rdunlap@infradead.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Existing userspace (in particular, upower) disables charge control by
setting the start threshold to 0 and the stop threshold to 100.
Handle that by actually setting the enable bit to 0 when a start
threshold of 0 was requested.
Fixes: cc3e883a06 ("power: supply: qcom_battmgr: Add charge control support")
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20251012233333.19144-4-val@packett.cool
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The sysfs API documentation says that drivers "round written values to
the nearest supported value" for charge_control_end_threshold.
Let's do this for both thresholds, as userspace (e.g. upower) generally
does not expect these writes to fail at all.
Fixes: cc3e883a06 ("power: supply: qcom_battmgr: Add charge control support")
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20251012233333.19144-3-val@packett.cool
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since wm831x_set_bits() may return error, log failure and exit from
wm831x_usb_limit_change() in such case.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 626b6cd5f5 ("power: wm831x_power: Support USB charger current limit management")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251009170553.566561-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There is a typo in rt9467_set_value_from_ranges() that can cause leaving local
variable sel with an undefined value which is then used in regmap_field_write().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6f7f70e3a8 ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20251009145308.1830893-1-m.masimov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The return value of rt9467_set_value_from_ranges() when setting AICL VTH is
not checked, even though it may fail.
Log error and return from rt9467_run_aicl() on fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6f7f70e3a8 ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251009144725.562278-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since iio_read_channel_processed() may fail, return its exit code on error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 814755c48f ("power: max17040: get thermal data from adc if available")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251008133648.559286-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since devm_delayed_work_autocancel() may fail, add return code check and
exit cw_bat_probe() on error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0cb172a491 ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251008120711.556021-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The device node pointers `np_conn` and `np_edev`, obtained from
of_parse_phandle() and of_get_parent() respectively, are not released.
This results in a reference count leak.
Add of_node_put() calls after the last use of these device nodes to
properly release their references and fix the leaks.
Fixes: 8242336dc8 ("power: supply: rt5033_charger: Add cable detection and USB OTG supply")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250929113234.1726-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
MAX77705 charger is most likely always a single device on the board,
however nothing stops board designers to have two of them, thus same
device driver could probe twice. Or user could manually try to probing
second time.
Device driver is not ready for that case, because it allocates
statically 'struct regmap_irq_chip' as non-const and stores during
probe in 'irq_drv_data' member a pointer to per-probe state
container ('struct max77705_charger_data'). devm_regmap_add_irq_chip()
does not make a copy of 'struct regmap_irq_chip' but stores the pointer.
Second probe - either successful or failure - would overwrite the
'irq_drv_data' from previous device probe, so interrupts would be
executed in a wrong context.
Fixes: a6a494c8e3 ("power: supply: max77705: Add charger driver for Maxim 77705")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023102905.71535-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
