Convert the PolarFire SoC clock driver to use regmaps instead of iomem
addresses as a preparatory work for supporting the new binding for this
device that will only provide the second of the two register regions, and
will require the use of syscon regmap to access the "cfg" and "periph"
clocks currently supported by the driver.
This is effectively a revert of commit 4da2404bb0 ("clk: microchip:
mpfs: convert cfg_clk to clk_divider") and commit d815569783 ("clk:
microchip: mpfs: convert periph_clk to clk_gate") as it resurrects the
ops structures removed in those commits, with the readl()s and
writel()s replaced by regmap_read()s and regmap_writes()s.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20251029-surfboard-refocus-ca9b135ab123@spud
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The first reg region in this binding is not exclusively for clocks, as
evidenced by the dual role of this device as a reset controller at
present. The first region is however better described by a simple-mfd
syscon, but this would have require a significant re-write of the
devicetree for the platform, so the easy way out was chosen when reset
support was first introduced. The region doesn't just contain clock and
reset registers, it also contains pinctrl and interrupt controller
functionality, so drop the region from the clock binding so that it can
be described instead by a simple-mfd syscon rather than propagate this
incorrect description of the hardware to the new pic64gx SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251029-unwatched-family-e47cb29ea815@spud
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
None of these functions are used, so remove them.
This renders the two bugs moot:
- get_random_u64_wait() used the wrong pointer type, making it provide
only 32 bits.
- The '#undef' directive used the wrong identifier, leaving the helper
macro defined.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Modern programs tend to include sys/select.h to get FD_SET() and
FD_CLR() definitions as well as struct fd_set, but in our case it
didn't exist.
The definitions were moved from types.h to sys/select.h, which is
now included from nolibc.h, and the sys_select() definition moved
there as well from sys.h.
Signed-off-by: Willy Tarreau <w@1wt.eu>
[Thomas: adapt to current -next branch]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
CQ shadow area should not be updated at the end of a page (once every
64th CQ entry), except when CQ has no more CQEs. SW must also increase
the requested CQ size by 1 and make sure the CQ is not exactly one page
in size. This is to address a quirk in the hardware.
Signed-off-by: Jay Bhat <jay.bhat@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251031021726.1003-4-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In case we get an unsignaled error completion, we silently consume the CQE by
pretending the QP does not exist. Without this, bookkeeping for signaled
completions does not work correctly.
Signed-off-by: Jay Bhat <jay.bhat@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251031021726.1003-5-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Failure to initialize info.create field to false in certain cases
was resulting in incorrect status code going to rdma-core when dereg_mr
failed during reset. To fix this, memset entire cqp_request->info
in irdma_alloc_and_get_cqp_request() function, so that this is not spread
all over the code.
Signed-off-by: Bhat, Jay <jay.bhat@intel.com>
Reviewed-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251031021726.1003-2-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Enforce local fence for LOCAL_INV WRs to
avoid spurious FASTREG_VALID_MKEY async events
during heavy invalidation/registration activity.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251031021726.1003-3-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Adds Krzysztof Czurylo as co-maintainer for irdma driver.
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Surprisingly we forgot to add this common one. It was added with a
per-arch guard allowing to later implement it in arch-specific asm
code like was done for a few other ones.
The test verifies that we don't search past the indicated length.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The help message says the headers are going to be installed into
tools/include/nolibc but this is only the default if $OUTPUT is not set,
so better clarify this (the current value of $OUTPUT is already shown).
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add PCIe controller nodes in DTS for Sophgo SG2042.
Default they are disabled.
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/b34d819cd763482e0ecbc5c5ea721f0101d1f844.1760929111.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
Crystal reports that the PCIe Advanced Error Reporting driver gets stuck
in an infinite loop on PREEMPT_RT:
Both the primary interrupt handler aer_irq() as well as the secondary
handler aer_isr() are forced into threads with identical priority.
Crystal writes that on the ARM system in question, the primary handler
has to clear an error in the Root Error Status register...
"before the next error happens, or else the hardware will set the
Multiple ERR_COR Received bit. If that bit is set, then aer_isr()
can't rely on the Error Source Identification register, so it scans
through all devices looking for errors -- and for some reason, on
this system, accessing the AER registers (or any Config Space above
0x400, even though there are capabilities located there) generates
an Unsupported Request Error (but returns valid data). Since this
happens more than once, without aer_irq() preempting, it causes
another multi error and we get stuck in a loop."
The issue does not show on non-PREEMPT_RT because the primary handler
runs in hardirq context and thus can preempt the threaded secondary
handler, clear the Root Error Status register and prevent the secondary
handler from getting stuck.
Emulate the same behavior on PREEMPT_RT by assigning a lower default
priority to the secondary handler if the primary handler is forced into
a thread.
Reported-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Crystal Wood <crwood@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/f6dcdb41be2694886b8dbf4fe7b3ab89e9d5114c.1761569303.git.lukas@wunner.de
Closes: https://lore.kernel.org/r/20250902224441.368483-1-crwood@redhat.com/
Idle migrators don't walk the whole tree in order to find out if there
are timers to migrate because they recorded the next deadline to be
verified within a single check in tmigr_requires_handle_remote().
Remove the related dead code and data.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-7-frederic@kernel.org
The CPU doing the prepare work for a remote target must be online from
the tree point of view and its hierarchy must be active, otherwise
propagating its active state up to the new root branch would be either
incorrect or racy.
Assert those conditions with more sanity checks.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-5-frederic@kernel.org
When a CPU from a new node boots, the old root may happen to be
connected to the new root even if their node mismatch, as depicted in
the following scenario:
1) CPU 0 boots and creates the first group for node 0.
[GRP0:0]
node 0
|
CPU 0
2) CPU 1 from node 1 boots and creates a new top that corresponds to
node 1, but it also connects the old root from node 0 to the new root
from node 1 by mistake.
[GRP1:0]
node 1
/ \
/ \
[GRP0:0] [GRP0:1]
node 0 node 1
| |
CPU 0 CPU 1
3) This eventually leads to an imbalanced tree where some node 0 CPUs
migrate node 1 timers (and vice versa) way before reaching the
crossnode groups, resulting in more frequent remote memory accesses
than expected.
[GRP2:0]
NUMA_NO_NODE
/ \
[GRP1:0] [GRP1:1]
node 1 node 0
/ \ |
/ \ [...]
[GRP0:0] [GRP0:1]
node 0 node 1
| |
CPU 0... CPU 1...
A balanced tree should only contain groups having children that belong
to the same node:
[GRP2:0]
NUMA_NO_NODE
/ \
[GRP1:0] [GRP1:0]
node 0 node 1
/ \ / \
/ \ / \
[GRP0:0] [...] [...] [GRP0:1]
node 0 node 1
| |
CPU 0... CPU 1...
In order to fix this, the hierarchy must be unfolded up to the crossnode
level as soon as a node mismatch is detected. For example the stage 2
above should lead to this layout:
[GRP2:0]
NUMA_NO_NODE
/ \
[GRP1:0] [GRP1:1]
node 0 node 1
/ \
/ \
[GRP0:0] [GRP0:1]
node 0 node 1
| |
CPU 0 CPU 1
This means that not only GRP1:0 must be created but also GRP1:1 and
GRP2:0 in order to prepare a balanced tree for next CPUs to boot.
Fixes: 7ee9887703 ("timers: Implement the hierarchical pull model")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-4-frederic@kernel.org
Initializing the tmc's group, the group's number of children and the
group's parent can all be done without locking because:
1) Reading the group's parent and its group mask is done locklessly.
2) The connections prepared for a given CPU hierarchy are visible to the
target CPU once online, thanks to the CPU hotplug enforced memory
ordering.
3) In case of a newly created upper level, the new root and its
connections and initialization are made visible by the CPU which made
the connections. When that CPUs goes idle in the future, the new link
is published by tmigr_inactive_up() through the atomic RmW on
->migr_state.
4) If CPUs were still walking up the active hierarchy, they could observe
the new root earlier. In this case the ordering is enforced by an
early initialization of the group mask and by barriers that maintain
address dependency as explained in:
b729cc1ec2 ("timers/migration: Fix another race between hotplug and idle entry/exit")
de3ced72a7 ("timers/migration: Enforce group initialization visibility to tree walkers")
5) Timers are propagated by a chain of group locking from the bottom to
the top. And while doing so, the tree also propagates groups links
and initialization. Therefore remote expiration, which also relies
on group locking, will observe those links and initialization while
holding the root lock before walking the tree remotely and update
remote timers. This is especially important for migrators in the
active hierarchy that may observe the new root early.
Therefore the locking is unnecessary at initialization. If anything, it
just brings confusion. Remove it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-3-frederic@kernel.org
Both the "do while" and "while" loops in tmigr_setup_groups() eventually
mimic the behaviour of "for" loops.
Simplify accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-2-frederic@kernel.org
On large NUMA systems, while running a test program that saturates the
inter-processor and inter-NUMA links, acquiring the jiffies_lock can be
very expensive.
If the cpu designated to do jiffies updates (tick_do_timer_cpu) gets
delayed and other cpus decide to do the jiffies update themselves, a large
number of them decide to do so at the same time.
The inexpensive check against tick_next_period is far quicker than actually
acquiring the lock, so most of these get in line to obtain the lock. If
obtaining the lock is slow enough, this spirals into the vast majority of
CPUs continuously being stuck waiting for this lock, just to obtain it and
find out that time has already been updated by another cpu. For example, on
one random entry to kdb by manually-injected NMI, 2912 of 3840 CPUs were
observed to be stuck there.
To avoid this, allow only one non-timekeeper CPU to call
tick_do_update_jiffies64() at any given time, resetting ts->stalled jiffies
only if the jiffies update function is actually called.
With this change, manually interrupting the test at most two CPUs are
observed to invoke tick_do_update_jiffies64() - the timekeeper and one
other.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20251027183456.343407-1-steve.wahl@hpe.com
Update the register offsets for all the clock ref branches to match the
new address mapping in the TCSR subsystem.
Fixes: 2c1d6ce4f3 ("clk: qcom: Add TCSR clock driver for Glymur SoC")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-tcsrcc_glymur-v1-1-0efb031f0ac5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
One new device ID for an Intel SoC.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF+eAACgkQJNaLcl1U
h9CUIwf+J+ii60TWW4Ye9rRy4QN5WjLLud9VTpVtLIVu54oXK4NxU+blTQ82AynB
291ZJ3sEHiO4PTi6ZAUsgKCZ+bCS0fE2XBJBH642yTyM1ixyFx/hs71rzE97OOA4
tQFAxJwJFRXIwTq4HEwBbxE1Oh0KFnBMQAo6lWx9rrtm+6BcUzYMXTwGYajLj3gj
vULpU6xpOuJ7H+LgM8W0pHVD4iGdqMUy/6qiknjmN5UKiormJxjBQzPSLgQis/7R
tSFO6dOfsQgEmlzIgBgHFtnikCNor6aA5bLOJgmPIemX9csQaejyZSpyAWSfZYdQ
28/yA4VemgiEddfeecpCMCd2s8vzQA==
=Y8Hn
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One new device ID for an Intel SoC"
* tag 'spi-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: intel: Add support for Oak Stream SPI serial flash
A simple fix for a missed part of an API conversion on the bd718x7 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF+isACgkQJNaLcl1U
h9CmJgf+MSainrAqu7SLLGYCA9P+dpUwxHoxWX5cpCMWFGNPGIg6hr9sDjxJuOXr
gQkUcSOzkFJgJ3WCphiOIUgXttRfYqk3/O2/LFn3Co0cdlnI8jTy5nTD7Ks4H8Aa
e2mUo+okFRMH2zYIOxDXzCwTgPuNc0glLSLTjFqc1pwghvPmgHqJEWbjVG560GbI
HBKrTCygFOIJT5LVMGXWFEh8IPTMdvDn4VFGqMwT9KaDx4DP+fYecfg8CEePHsRl
F+40J2URgUDFYMOInzMoWL91766q9euQTsywLWFS3KxKtll+19jF6oACdeA3cXZE
guR6V2zxzj8acpQ1REhCO11trAvLTw==
=beWy
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A simple fix for a missed part of an API conversion in the bd718x7
driver"
* tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: bd718x7: Fix voltages scaled by resistor divider
There is currently a problem where, in the specific case of SMEM not
initialized by SBL, any SMEM API wrongly returns PROBE_DEFER
communicating wrong info to any user of this API.
A better way to handle this would be to track the SMEM state and return
a different kind of error than PROBE_DEFER.
Rework the __smem handle to always init it to the error pointer
-EPROBE_DEFER following what is already done by the SMEM API.
If we detect that the SBL didn't initialized SMEM, set the __smem handle
to the error pointer -ENODEV.
Also rework the SMEM API to handle the __smem handle to be an error
pointer and return it appropriately.
This way user of the API can react and return a proper error or use
fallback way for the failing API.
While at it, change the return error when SMEM is not initialized by SBL
also to -ENODEV to make it consistent with the __smem handle and use
dev_err_probe() helper to return the message.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20251031130835.7953-3-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF/SEACgkQJNaLcl1U
h9BjXwgAgg3HM/oWn3aiWp8q9j58dSJb7pWD+GKdBS8lvBoOvmnHY9QnEOkBFmvV
Oa1vNiKVlRIsa0YRbswsvkB0Wt6F5vOaQ3WrZpVYpuF5xxyC/1b0AQTIiZhfZN2E
p46E1/VkCJNWdoJwqdIS9kWvZDHeA3BcCDwDc56FsgBE/25LNfVOPy/wxR0OU2dd
1LFGASCW9SRV6+xxCAb+FE/eLM/7RGvjIFiuh5flx/oPKfoqyQ5E1hjnrG5CJH0k
kI8mapifSFB2cd72SKdB/KywQVYmzkFQMQYUmHKiFWtqwql8A6TjAsmX/yJmdUI1
7OioR+sA6TGr4QNjUE/0NyrAotLs6A==
=1Osa
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers"
* tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Correct documentation of wake_invert flag
regmap: slimbus: fix bus_context pointer in regmap init calls
Add INIT_ERR_PTR() macro to initialize static variables with error
pointers. This might be useful for specific case where there is a static
variable initialized to an error condition and then later set to the
real handle once probe finish/completes.
This is to handle compilation problems like:
error: initializer element is not constant
where ERR_PTR() can't be used.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251031130835.7953-2-ansuelsmth@gmail.com
[bjorn: Added () suffix on macro references]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations.
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum.
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds.
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=z2oz
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants
* tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Ensure clear_page() variants always have __kcfi_typeid_ symbols
x86/cpu: Add/fix core comments for {Panther,Nova} Lake
x86/CPU/AMD: Extend Zen6 model range
x86/build: Disable SSE4a
x86/fpu: Ensure XFD state on signal delivery
x86/CPU/AMD: Add RDSEED fix for Zen5
x86/microcode/AMD: Limit Entrysign signature checking to known generations
- Fix an out-of-bounds access on non-hybrid platforms in the
Intel PMU DS code, reported by KASAN.
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NYBY
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Miscellaneous fixes and CPU model updates:
- Fix an out-of-bounds access on non-hybrid platforms in the Intel
PMU DS code, reported by KASAN
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version"
* tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add uncore PMU support for Wildcat Lake
perf/x86/intel: Add PMU support for WildcatLake
perf/x86/intel: Fix KASAN global-out-of-bounds warning
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaQXOZAAKCRBcsMJ8RxYu
Y43FAX9gZLSS+6U9NtjQXbwCzhKg0fPWMqt2eEhLxPF2bpNO7FmgecQKg3wZi0XC
gkhOqHYBfikmW5D/rUm0OMY7mBmyIMaSm0r77u82up08YZnc40LnMavH4+HAm15h
lhT/MhpJKQ==
=BJng
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"Just a single bug fix (and documentation for the issue)"
* tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document another racy GC case in xfs_zoned_map_extent
xfs: prevent gc from picking the same zone twice
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support for
it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaQWN/gAKCRAdayaRccAa
ljUzAQCGh5zhfwsCfMc5M7/9v2FiEBKNzTc/xTK04vWdZ3A39QEA6XuyVx+QPBkS
ts7gPrR6NC7AokdqTHXKhBW/ebaNOw0=
=GmCb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
To pick the changes from:
e19c062199 ("x86/cpufeatures: Add support for Assignable Bandwidth Monitoring Counters (ABMC)")
7b59c73fd6 ("x86/cpufeatures: Add SNP Secure TSC")
3c7cb84145 ("x86/cpufeatures: Add a CPU feature bit for MSR immediate form instructions")
2f8f173413 ("x86/vmscape: Add conditional IBPB mitigation")
a508cec6e5 ("x86/vmscape: Enumerate VMSCAPE bug")
This causes these perf files to be rebuilt and brings some X86_FEATURE
that may be used by:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Please see tools/include/uapi/README for further details.
Cc: Babu Moger <babu.moger@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Xin Li <xin@zytor.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in this cset:
56101b69c9 ("uprobes/x86: Add uprobe syscall to speed up uprobe")
That add support for this new 'uprobe' syscall in tools such as 'perf trace'.
Now it is possible to do a system wide 'perf trace' to look if this new
syscall is being used:
root@number:~# perf trace -v -e uprobe
<SNIP>
event qualifier tracepoint filter: (common_pid != 33989) && (id == 336)
^C
root@number#
$ grep -w uprobe tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
336 common uprobe sys_uprobe
$
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Please see tools/include/uapi/README for further details.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in this cset:
e83f0b5d10 ("nsfs: support exhaustive file handles")
That doesn't introduce anything of interest for tools/, just addresses
these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Please see tools/include/uapi/README for further details.
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in these csets:
8cdc4d2701 ("mm/huge_memory: respect MADV_COLLAPSE with PR_THP_DISABLE_EXCEPT_ADVISED")
9dc21bbd62 ("prctl: extend PR_SET_THP_DISABLE to optionally exclude VM_HUGEPAGE")
That don't introduce anything of interest for the tools/, just
addressing these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Please see tools/include/uapi/README for further details.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reading large compressed files is extremely slow when readahead is enabled.
For example, reading a 4 GB XPRESS-4K compressed file (compression ratio
≈ 4:1) takes about 230 minutes with readahead enabled, but only around 3
minutes when readahead is disabled.
The issue was first observed in January 2025 and is reproducible with large
compressed NTFS files. Disabling readahead for compressed files avoids this
performance regression, although this may not be the ideal long-term fix.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
To pick up changes from:
db2ab24a34 ("Add RWF_NOSIGNAL flag for pwritev2")
These are used to beautify fs syscall arguments, albeit the changes in
this update are not affecting those beautifiers.
This addresses these tools/ build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lauri Vasama <git@vasama.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Call pm_runtime_resume_and_get() before accessing GCE hardware in
mbox_send_message(), and invoke pm_runtime_put_autosuspend() in the
cmdq callback to release the PM reference and start autosuspend for
GCE. This ensures correct power management for the GCE device.
Fixes: 8afe816b0c ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250829091727.3745415-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The list operation to find and pop transaction entry appears several
times in transaction implementation, and can be replaced with a helper
functional macro.
Link: https://lore.kernel.org/r/20251101102131.925071-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
If an insn->alt points to a STAC/CLAC instruction, skip_alt_group()
assumes it's part of an alternative ("alt group") as opposed to some
other kind of "alt" such as an exception fixup.
While that assumption may hold true in the current code base, Linus has
an out-of-tree patch which breaks that assumption by replacing the
STAC/CLAC alternatives with raw STAC/CLAC instructions.
Make skip_alt_group() more robust by making sure it's actually an alt
group before continuing.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 2d12c6fb78 ("objtool: Remove ANNOTATE_IGNORE_ALTERNATIVE from CLAC/STAC")
Closes: https://lore.kernel.org/CAHk-=wi6goUT36sR8GE47_P-aVrd5g38=VTRHpktWARbyE-0ow@mail.gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/3d22415f7b8e06a64e0873b21f48389290eeaa49.1761767616.git.jpoimboe@kernel.org
Fix bug where make nconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014144405.3975275-2-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
