Remove the tstamp local variable in mlx5i_complete_rx_cqe() and directly
pass the tstamp field from priv to mlx5e_rx_hw_stamp(). The local variable
was only used once and provided no additional value.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761819910-1011051-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the tstamp pointer field from mlx5e_channel, mlx5e_ptp, and
mlx5e_trap structures, since it was only used to reference the tstamp
field in the priv structure. Instead, directly use the tstamp field
from priv when initializing RQ structures.
Also remove the unused hwtstamp_config field from mlx5_clock structure
as part of the cleanup.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761819910-1011051-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The internal switch on BCM63XX SoCs will unconditionally add 802.1Q VLAN
tags on egress to CPU when 802.1Q mode is enabled. We do this
unconditionally since commit ed409f3bba ("net: dsa: b53: Configure
VLANs while not filtering").
This is fine for VLAN aware bridges, but for standalone ports and vlan
unaware bridges this means all packets are tagged with the default VID,
which is 0.
While the kernel will treat that like untagged, this can break userspace
applications processing raw packets, expecting untagged traffic, like
STP daemons.
This also breaks several bridge tests, where the tcpdump output then
does not match the expected output anymore.
Since 0 isn't a valid VID, just strip out the VLAN tag if we encounter
it, unless the priority field is set, since that would be a valid tag
again.
Fixes: 964dbf186e ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20251027194621.133301-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PTP core falls back to gettimex64 and getcrosststamp when
getcycles64 or getcyclesx64 are not implemented. This causes the CYCLES
ioctls to retrieve PHC real time instead of free-running cycles.
Reject PTP_SYS_OFFSET_{PRECISE,EXTENDED}_CYCLES for clocks without
free-running counter support since the result would represent PHC real
time and system time rather than cycles and system time.
Fixes: faf23f54d3 ("ptp: Add ioctl commands to expose raw cycle counter values")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251029083813.2276997-1-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Handle the NIC hardware link state events received from the HW
channel, then set the proper link state accordingly.
And, add a feature bit, GDMA_DRV_CAP_FLAG_1_HW_VPORT_LINK_AWARE,
to inform the NIC hardware this handler exists.
Our MANA NIC only sends out the link state down/up messages
when we need to let the VM rerun DHCP client and change IP
address. So, add netif_carrier_on() in the probe(), let the NIC
show the right initial state in /sys/class/net/ethX/operstate.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1761770601-16920-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tim Hostetler says:
====================
gve: Fix NULL dereferencing with PTP clock
This patch series fixes NULL dereferences that are possible with gve's
PTP clock due to not stubbing certain ptp_clock_info callbacks.
====================
Link: https://patch.msgid.link/20251029184555.3852952-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gve implemented a ptp_clock for sole use of do_aux_work at this time.
ptp_clock_gettime() and ptp_sys_offset() assume every ptp_clock has
implemented either gettimex64 or gettime64. Stub gettimex64 and return
-EOPNOTSUPP to prevent NULL dereferencing.
Fixes: acd1638052 ("gve: Add initial PTP device support")
Reported-by: syzbot+c8c0e7ccabd456541612@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c8c0e7ccabd456541612
Signed-off-by: Tim Hostetler <thostet@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251029184555.3852952-2-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Page 13 of the PineTab2 v2 schematic dd 20230417 shows VCCIO4's power
source is VCCIO_WL. Page 19 shows that VCCIO_WL is connected to
VCCA1V8_PMU, so fix the PineTab2 dtsi to reflect that.
Fixes: 1b7e19448f ("arm64: dts: rockchip: Add devicetree for Pine64 PineTab2")
Cc: stable@vger.kernel.org
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
Link: https://patch.msgid.link/20251027155724.138096-1-diederik@cknow-tech.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In commit 296602b8e5 ("arm64: dts: rockchip: Move RK3399 OPPs to dtsi
files for SoC variants"), everything shared between variants of RK3399
was put into rk3399-base.dtsi and the rest in variant-specific DTSI,
such as rk3399-t, rk3399-op1, rk3399, etc.
Therefore, the variant-specific DTSI should include rk3399-base.dtsi and
not another variant's DTSI.
rk3399-op1 wrongly includes rk3399 (a variant) DTSI instead of
rk3399-base DTSI, let's fix this oversight by including the intended
DTSI.
Fortunately, this had no impact on the resulting DTB since all nodes
were named the same and all node properties were overridden in
rk3399-op1.dtsi. This was checked by doing a checksum of rk3399-op1 DTBs
before and after this commit.
No intended change in behavior.
Fixes: 296602b8e5 ("arm64: dts: rockchip: Move RK3399 OPPs to dtsi files for SoC variants")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/20251029-rk3399-op1-include-v1-1-2472ee60e7f8@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The u-boot,spl-boot-order property requires a label at a boot
device node. In order to migrate to OF_UPSTREAM more easier
add a spi_flash label to the rk3288-veyron.dtsi file.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://patch.msgid.link/8a423a6f-bfdc-4947-aef9-35ee7c4f6ca2@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The binding for tps65910 has been converted to yaml and instead of the
deprecated regulator-compatible, the node-names are now used to identify
the individual regulators. Also some additional required properties
were added.
Adapt the tps65910 nodes on Rockchip boards to adhere to the updated
binding, which also allows us to drop the tps65910.dtsi include.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://patch.msgid.link/b3d05df4-a916-48e1-8d9e-590782806bd5@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
test_tc_tunnel is missing checks on any open_netns. Add those checks
anytime we try to enter a net namespace, and skip the related operations
if we fail. While at it, reduce the number of open_netns/close_netns for
cases involving operations in two distinct namespaces: the test
currently does the following:
nstoken = open_netns("foo")
do_operation();
close(nstoken);
nstoken = open_netns("bar")
do_another_operation();
close(nstoken);
As already stated in reviews for the initial test, we don't need to go
back to the root net namespace to enter a second namespace, so just do:
ntoken_client = open_netns("foo")
do_operation();
nstoken_server = open_netns("bar")
do_another_operation();
close(nstoken_server);
close(nstoken_client);
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251031-tc_tunnel_improv-v1-2-0ffe44d27eda@bootlin.com
A subtest setup can fail in a wide variety of ways, so make sure not to
run it if an issue occurs during its setup. The return value is
already representing whether the setup succeeds or fails, it is just
about wiring it.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251031-tc_tunnel_improv-v1-1-0ffe44d27eda@bootlin.com
When building with CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y, there is a series
of errors from the various versions of clear_page() not having __kcfi_typeid_
symbols.
$ cat kernel/configs/repro.config
CONFIG_CFI=y
# CONFIG_LTO_NONE is not set
CONFIG_LTO_CLANG_FULL=y
$ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 clean defconfig repro.config bzImage
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_rep
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_rep)
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_orig
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_orig)
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_erms
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_erms)
With full LTO, it is possible for LLVM to realize that these functions never
have their address taken (as they are only used within an alternative, which
will make them a direct call) across the whole kernel and either drop or skip
generating their kCFI type identification symbols.
clear_page_{rep,orig,erms}() are defined in clear_page_64.S with
SYM_TYPED_FUNC_START as a result of
2981557cb0 ("x86,kcfi: Fix EXPORT_SYMBOL vs kCFI"),
as exported functions are free to be called indirectly thus need kCFI type
identifiers.
Use KCFI_REFERENCE with these clear_page() functions to force LLVM to see
these functions as address-taken and generate then keep the kCFI type
identifiers.
Fixes: 2981557cb0 ("x86,kcfi: Fix EXPORT_SYMBOL vs kCFI")
Closes: https://github.com/ClangBuiltLinux/linux/issues/2128
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patch.msgid.link/20251013-x86-fix-clear_page-cfi-full-lto-errors-v1-1-d69534c0be61@kernel.org
Reading /proc/irq/N/smp_affinity* races with irq_set_affinity() and
irq_move_masked_irq(), leading to old or torn output for users.
After a user writes a new CPU mask to /proc/irq/N/affinity*, the syscall
returns success, yet a subsequent read of the same file immediately returns
a value different from what was just written.
That's due to a race between show_irq_affinity() and irq_move_masked_irq()
which lets the read observe a transient, inconsistent affinity mask.
Cure it by guarding the read with irq_desc::lock.
[ tglx: Massaged change log ]
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251028090408.76331-1-songmuchun@bytedance.com
Stephen points out that some of the percpu_devid irq affinity
documentation is either missing or not matching the data structures.
Address all the issues in one go.
Fixes: 87b0031f7f ("irqdomain: Add firmware info reporting interface")
Fixes: 258e7d28a3 ("genirq: Add affinity to percpu_devid interrupt requests")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251030143032.2035987-1-maz@kernel.org
-----BEGIN PGP SIGNATURE-----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=fYnS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Restore custom qcom ASPM enablement code so L1 PM Substates are
enabled as they were in v6.17 even though the PCI core now enables
just L0s and L1 by default (Bjorn Helgaas)
- Size prefetchable bridge windows only when they actually exist, to
avoid a WARN_ON() regression (Ilpo Järvinen)
* tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Do not size non-existing prefetchable window
Revert "PCI: qcom: Remove custom ASPM enablement code"
PCIe link configurations such as 8GT/s x2 and 16GT/s x1 may operate at the
same frequency, but differ in other characteristics like RPMh votes. But
the existing OPP selection which is solely based on frequency (the 'opp-hz'
DT property) cannot distinguish between such cases.
Hence, use the newly introduced dev_pm_opp_find_key_exact() API to match
both frequency and level (the 'opp-level' property) when selecting an OPP,
here level indicates PCIe data rate.
To support older device trees where opp-level is not defined, check if
opp-level is present or not using dev_pm_opp_find_level_exact(). If
not present fallback to frequency only match.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: zero initialize dev_pm_opp_key struct]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add 'opp-hz' and 'opp-level' in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251013-opp_pcie-v5-5-eb64db2b4bd3@oss.qualcomm.com
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory. New
selftest support included to avoid such issues in the future.
(Alex Mastro)
-----BEGIN PGP SIGNATURE-----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=sfMw
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory.
New selftest support included to avoid such issues in the future
(Alex Mastro)
* tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio:
vfio: selftests: add end of address space DMA map/unmap tests
vfio: selftests: update DMA map/unmap helpers to support more test kinds
vfio/type1: handle DMA map/unmap up to the addressable limit
vfio/type1: move iova increment to unmap_unpin_*() caller
vfio/type1: sanitize for overflow using check_*_overflow()
Building with W=1 reports:
Warning: fs/gfs2/glock.c:1248 function parameter 'ip' not described
in '__gfs2_holder_init'
The ip parameter was added when __gfs2_holder_init started saving the
gfs2_glock_nq_init caller's return address to gh_ip. This makes it
easier to backtrack which holder took the lock. Document @ip to silence
this warning.
Fixes: b016d9a84a ("gfs2: Save ip from gfs2_glock_nq_init")
Signed-off-by: Sukrut Heroorkar <hsukrut3@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Documentation for GFS2 is scattered in three docs that are in
Documentation/filesystems/ directory. As these docs are standing out as
a group, move them into separate gfs2/ subdirectory.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formatting values returned
to user space. This patch updates the GFS2 sysfs interface accordingly.
It replaces uses of sprintf() and snprintf() in all *_show() functions
with sysfs_emit() to align with current kernel sysfs API best practices.
It also updates the TUNE_ATTR_2 macro to use sysfs_emit() instead of
snprintf().
Signed-off-by: Utkarsh Singh <utkarsh.singh.em@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
pbus_size_mem() should only be called for bridge windows that exist but
__pci_bus_size_bridges() may point 'pref' to a resource that does not exist
(has zero flags) in case of non-root buses.
When prefetchable bridge window does not exist, the same non-prefetchable
bridge window is sized more than once which may result in duplicating
entries into the realloc_head list. Duplicated entries are shown in this
log and trigger a WARN_ON() because realloc_head had residual entries after
the resource assignment algorithm:
pci 0000:00:03.0: [11ab:6820] type 01 class 0x060400 PCIe Root Port
pci 0000:00:03.0: PCI bridge to [bus 00]
pci 0000:00:03.0: bridge window [io 0x0000-0x0fff]
pci 0000:00:03.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:00:03.0: bridge window [mem 0x00200000-0x003fffff] to [bus 02] add_size 200000 add_align 200000
pci 0000:00:03.0: bridge window [mem 0x00200000-0x003fffff] to [bus 02] add_size 200000 add_align 200000
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe03fffff]: assigned
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe03fffff]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/pci/setup-bus.c:2373 pci_assign_unassigned_root_bus_resources+0x1bc/0x234
Check resource flags of 'pref' and only size the prefetchable window if the
resource has the IORESOURCE_PREFETCH flag.
Fixes: ae88d0b9c5 ("PCI: Use pbus_select_window_for_type() during mem window sizing")
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Closes: https://lore.kernel.org/r/51e8cf1c62b8318882257d6b5a9de7fdaaecc343.camel@gmail.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Link: https://patch.msgid.link/20251027132423.8841-1-ilpo.jarvinen@linux.intel.com
This reverts commit a729c16646.
Prior to a729c16646 ("PCI: qcom: Remove custom ASPM enablement code"),
the qcom controller driver enabled ASPM, including L0s, L1, and L1 PM
Substates, for all devices powered on at the time the controller driver
enumerates them.
ASPM was *not* enabled for devices powered on later by pwrctrl (unless the
kernel was built with PCIEASPM_POWERSAVE or PCIEASPM_POWER_SUPERSAVE, or
the user enabled ASPM via module parameter or sysfs).
After f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and ASPM states for
devicetree platforms"), the PCI core enabled all ASPM states for all
devices whether powered on initially or by pwrctrl, so a729c16646 was
unnecessary and reverted.
But f3ac2ff148 was too aggressive and broke platforms that didn't support
CLKREQ# or required device-specific configuration for L1 Substates, so
df5192d9bb ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms")
enabled only L0s and L1.
On Qualcomm platforms, this left L1 Substates disabled, which was a
regression. Revert a729c16646 so L1 Substates will be enabled on devices
that are initially powered on. Devices powered on by pwrctrl will be
addressed later.
Fixes: df5192d9bb ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms")
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/lkml/aPuXZlaawFmmsLmX@hovoldconsulting.com/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251024210514.1365996-1-helgaas@kernel.org
-----BEGIN PGP SIGNATURE-----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=rC6y
-----END PGP SIGNATURE-----
Merge tag 'block-6.18-20251031' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix blk-crypto reporting EIO when EINVAL is the correct error code
- Two bug fixes for the block zone support
- NVME pull request via Keith:
- Target side authentication fixup
- Peer-to-peer metadata fixup
- null_blk DMA alignment fix
* tag 'block-6.18-20251031' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
null_blk: set dma alignment to logical block size
blk-crypto: use BLK_STS_INVAL for alignment errors
block: make REQ_OP_ZONE_OPEN a write operation
block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL
nvme-pci: use blk_map_iter for p2p metadata
nvmet-auth: update sc_c in host response
- Use correct locking in zPCI event code to avoid deadlock
- Get rid of irqs_registered flag in zpci_dev structure and restore IRQ
unconditionally for zPCI devices. This fixes sit uations where the flag
was not correctly updated
- Fix potential memory leak kernel page table dumper code
- Disable (revert) ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP for s390 again. The
optimized hugetlb vmemmap code modifies kernel page tables in a way which
does not work on s390 and leads to reproducible kernel crashes due to
stale TLB entries. This needs to be addressed with some larger changes.
For now simply disable the feature
- Update defconfigs
-----BEGIN PGP SIGNATURE-----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=nKcN
-----END PGP SIGNATURE-----
Merge tag 's390-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Use correct locking in zPCI event code to avoid deadlock
- Get rid of irqs_registered flag in zpci_dev structure and restore IRQ
unconditionally for zPCI devices. This fixes sit uations where the
flag was not correctly updated
- Fix potential memory leak kernel page table dumper code
- Disable (revert) ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP for s390 again.
The optimized hugetlb vmemmap code modifies kernel page tables in a
way which does not work on s390 and leads to reproducible kernel
crashes due to stale TLB entries. This needs to be addressed with
some larger changes. For now simply disable the feature
- Update defconfigs
* tag 's390-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
s390/mm: Fix memory leak in add_marker() when kvrealloc() fails
s390/pci: Restore IRQ unconditionally for the zPCI device
s390: Update defconfigs
s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump
Searching all event names is slower now that legacy names are
included. Add a cache to avoid long iterative searches. Note, the
cache isn't cleaned up and is as such a memory leak, however, globally
reachable leaks like this aren't treated as leaks by leak sanitizer.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Closes: https://lore.kernel.org/linux-perf-users/09943f4f-516c-4b93-877c-e4a64ed61d38@linux.ibm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
- ath10k: revert a patch that had caused issues on some devices
- cfg80211/mac80211: use hrtimers for some things where the
precise timing matters
- zd1211rw: fix a long-standing potential leak
-----BEGIN PGP SIGNATURE-----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=3oN9
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-10-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of new fixes:
- ath10k: revert a patch that had caused issues on some devices
- cfg80211/mac80211: use hrtimers for some things where the
precise timing matters
- zd1211rw: fix a long-standing potential leak
* tag 'wireless-2025-10-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: zd1211rw: fix potential memory leak in __zd_usb_enable_rx()
wifi: mac80211: use wiphy_hrtimer_work for csa.switch_work
wifi: mac80211: use wiphy_hrtimer_work for ml_reconf_work
wifi: mac80211: use wiphy_hrtimer_work for ttlm_work
wifi: cfg80211: add an hrtimer based delayed work item
Revert "wifi: ath10k: avoid unnecessary wait for service ready message"
====================
Link: https://patch.msgid.link/20251030104919.12871-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The syscalls_sys_{enter,exit} map in augmented_raw_syscalls.bpf.c has
max entries of 512. Usually syscall numbers are smaller than this but
x86 has x32 ABI where syscalls start from 512.
That makes trace__init_syscalls_bpf_prog_array_maps() fail in the middle
of the loop when it accesses those keys. As the loop iteration is not
ordered by syscall numbers anymore, the failure can affect non-x32
syscalls.
Let's increase the map size to 1024 so that it can handle those ABIs
too. While most systems won't need this, increasing the size will be
safer for potential future changes.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The json file incorrectly used "acceses" instead of "accesses".
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Correct instruction spelling errors.
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add initial documentation for all recently added Xe driver
specific SR-IOV sysfs files located under device/sriov_admin.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-18-michal.wajdeczko@intel.com
It is expected that VFs activity will be monitored and in some
cases admin might want to silence specific VF without killing
the VM where it was attached.
Add write-only attribute to stop GuC scheduling at VFs level.
/sys/bus/pci/drivers/xe/BDF/
├── sriov_admin/
├── vf1/
│ └── stop [WO] bool
├── vf2/
│ └── stop [WO] bool
Writing "1" or "y" (or whatever is recognized by the strtobool()
function) to this file will trigger the change of the VF state
to STOP (GuC will stop servicing the VF). To go back to a READY
state (to allow GuC to service this VF again) the VF FLR must be
triggered (which can be done by writing 1 to device/reset file).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-17-michal.wajdeczko@intel.com
In the upcoming patch we would like to use this private helper
during preparation of the sysfs links. Promote it.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-15-michal.wajdeczko@intel.com
We have just added bulk change of the scheduling priority for all
VFs and PF, but that only allow to select LOW and NORMAL priority.
Add read-write attribute under PF to allow changing its priority
without impacting other VFs priority settings.
For completeness also add read-only attributes under VFs, to show
currently selected priority levels used by the VFs.
/sys/bus/pci/drivers/xe/BDF/
├── sriov_admin/
├── pf/
│ └── profile
│ └── sched_priority [RW] low, normal, high
├── vf1/
│ └── profile
│ └── sched_priority [RO] low, normal
Writing "high" to the PF read-write attribute will change PF
priority on all tiles/GTs to HIGH (schedule function in the next
time-slice after current one completes and it has work). Writing
"low" or "normal" to change priority to LOW/NORMAL is supported.
When read, those files will display the current and available
scheduling priorities. The currently active priority level will
be enclosed in square brackets, default output will be like:
$ grep . -h sriov_admin/{pf,vf1,vf2}/profile/sched_priority
[low] normal high
[low] normal
[low] normal
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-14-michal.wajdeczko@intel.com
It is expected to be a common practice to configure the same level
of scheduling priority across all VFs and PF (at least as starting
point). Due to current GuC FW limitations it is also the only way
to change VFs priority.
Add write-only sysfs attribute that will apply required priority
level to all VFs and PF at once.
/sys/bus/pci/drivers/xe/BDF/
├── sriov_admin/
├── .bulk_profile
│ └── sched_priority [WO] low, normal
Writing "low" to this write-only attribute will change PF and
VFs scheduling priority on all tiles/GTs to LOW (function will
be scheduled only if it has work submitted). Similarly, writing
"normal" will change functions priority to NORMAL (functions will
be scheduled irrespective of whether there is a work or not).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-13-michal.wajdeczko@intel.com
We already have function to configure PF (or VF) scheduling priority
on a single GT, but we also need function that will cover all tiles
and GTs.
However, due to the current GuC FW limitation, we can't always rely
on per-GT function as it actually only works for the PF case. The
only way to change VFs scheduling priority is to use 'sched_if_idle'
policy KLV that will change priorities for all VFs (and the PF).
We will use these new functions in the upcoming patches.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-12-michal.wajdeczko@intel.com
It is expected to be a common practice to configure the same values
of execution quantum and preemption timeout parameters across all VFs.
Add write-only sysfs attributes that will apply required EQ/PT values
globally, without forcing admin to update PF and each VF separately.
/sys/bus/pci/drivers/xe/BDF/
├── sriov_admin/
├── .bulk_profile
│ ├── exec_quantum_ms [WO] unsigned integer
│ └── preempt_timeout_us [WO] unsigned integer
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-11-michal.wajdeczko@intel.com
We already have functions to configure EQ/PT for single VF across
all tiles/GTs. Now add helper functions that will do that for all
VFs (and the PF) at once.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-10-michal.wajdeczko@intel.com
We already have functions to bulk configure 'hard' resources like
GGTT, LMEM or GuC context/doorbells IDs. Now add functions for the
'soft' scheduling parameters, as we will need them soon in the
upcoming patches.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-9-michal.wajdeczko@intel.com
Both pf_get_exec_quantum() and pf_get_preempt_timeout() should
return u32 as this is a type of the underlying data.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-8-michal.wajdeczko@intel.com
Our current bulk configuration requests are only about VFs, but
we want to add new functions that will also include PF configs.
Update our bulk report helper to accept also PFID as first VFID.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-7-michal.wajdeczko@intel.com
On current platforms, in SR-IOV virtualization, the GPU is shared
between VFs on the time-slice basis. The 'execution quantum' (EQ)
and 'preemption timeout' (PT) are two main scheduling parameters
that could be set individually per each VF.
Add EQ/PT read-write attributes for the PF and all VFs.
By exposing those two parameters over sysfs, the admin can change
their default values (infinity) and let the GuC scheduler enforce
that settings.
/sys/bus/pci/drivers/xe/BDF/
├── sriov_admin/
├── pf/
│ └── profile
│ ├── exec_quantum_ms [RW] unsigned integer
│ └── preempt_timeout_us [RW] unsigned integer
├── vf1/
│ └── profile
│ ├── exec_quantum_ms [RW] unsigned integer
│ └── preempt_timeout_us [RW] unsigned integer
Writing 0 to these files will set infinity EQ/PT for the VF on all
tiles/GTs. This is a default value. Writing non-zero integers to
these files will change EQ/PT to new value (in their respective
units: msec or usec).
Reading from these files will return EQ/PT as previously set on
all tiles/GTs. In case of inconsistent values detected, due to
errors or low-level configuration done using debugfs, -EUCLEAN
error will be returned.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-6-michal.wajdeczko@intel.com
In upcoming patches we will want to configure VF's preemption
timeout (PT) on all GTs under single lock to avoid potential
races due to parallel GT configuration attempts.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-5-michal.wajdeczko@intel.com
