The Cirrus CS4271 codec can use an external clock as an input Master
Clock. When no crystal is used, the CS4271 component considers its MCLK
pin as an input pin and expects the external clock connected to provide
the Master Clock.
This clock is not documented in the binding.
Add the missing clock.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251029093921.624088-4-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 9a397f4736 ("ASoC: cs4271: add regulator consumer support")
has introduced regulators in the driver.
Regulators are enabled at the beginning of component_probe() but they
are not disabled on errors. This can lead to unbalanced enable/disable.
Fix the error path to disable regulators on errors.
Fixes: 9a397f4736 ("ASoC: cs4271: add regulator consumer support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20251029093921.624088-3-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In parallel with this driver being introduced there was an update in commit
013a3a66f2 ("regmap: sdw-mbq: Don't assume the regmap device is the
SoundWire slave") which changed the API for devm_regmap_init_sdw_mbq_cfg()
resulting in a build break. Update to fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Alexis Lothoré says:
====================
Hello,
this is the v3 of test_tc_tunnel conversion into test_progs framework.
This new revision:
- fixes a few issues spotted by the bot reviewer
- removes any test ensuring connection failure (and so depending on a
timout) to keep the execution time reasonable
test_tc_tunnel.sh tests a variety of tunnels based on BPF: packets are
encapsulated by a BPF program on the client egress. We then check that
those packets can be decapsulated on server ingress side, either thanks
to kernel-based or BPF-based decapsulation. Those tests are run thanks
to two veths in two dedicated namespaces.
- patches 1 and 2 are preparatory patches
- patch 3 introduce tc_tunnel test into test_progs
- patch 4 gets rid of the test_tc_tunnel.sh script
The new test has been executed both in some x86 local qemu machine, as
well as in CI:
# ./test_progs -a tc_tunnel
#454/1 tc_tunnel/ipip_none:OK
#454/2 tc_tunnel/ipip6_none:OK
#454/3 tc_tunnel/ip6tnl_none:OK
#454/4 tc_tunnel/sit_none:OK
#454/5 tc_tunnel/vxlan_eth:OK
#454/6 tc_tunnel/ip6vxlan_eth:OK
#454/7 tc_tunnel/gre_none:OK
#454/8 tc_tunnel/gre_eth:OK
#454/9 tc_tunnel/gre_mpls:OK
#454/10 tc_tunnel/ip6gre_none:OK
#454/11 tc_tunnel/ip6gre_eth:OK
#454/12 tc_tunnel/ip6gre_mpls:OK
#454/13 tc_tunnel/udp_none:OK
#454/14 tc_tunnel/udp_eth:OK
#454/15 tc_tunnel/udp_mpls:OK
#454/16 tc_tunnel/ip6udp_none:OK
#454/17 tc_tunnel/ip6udp_eth:OK
#454/18 tc_tunnel/ip6udp_mpls:OK
#454 tc_tunnel:OK
Summary: 1/18 PASSED, 0 SKIPPED, 0 FAILED
====================
Link: https://patch.msgid.link/20251027-tc_tunnel-v3-0-505c12019f9d@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Now that test_tc_tunnel.sh scope has been ported to the test_progs
framework, remove it.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251027-tc_tunnel-v3-4-505c12019f9d@bootlin.com
The test_tc_tunnel.sh script checks that a large variety of tunneling
mechanisms handled by the kernel can be handled as well by eBPF
programs. While this test shares similarities with test_tunnel.c (which
is already integrated in test_progs), those are testing slightly
different things:
- test_tunnel.c creates a tunnel interface, and then get and set tunnel
keys in packet metadata, from BPF programs.
- test_tc_tunnels.sh manually parses/crafts packets content
Bring the tests covered by test_tc_tunnel.sh into the test_progs
framework, by creating a dedicated test_tc_tunnel.sh. This new test
defines a "generic" runner which, for each test configuration:
- will configure the relevant veth pair, each of those isolated in a
dedicated namespace
- will check that traffic will fail if there is only an encapsulating
program attached to one veth egress
- will check that traffic succeed if we enable some decapsulation module
on kernel side
- will check that traffic still succeeds if we replace the kernel
decapsulation with some eBPF ingress decapsulation.
Example of the new test execution:
# ./test_progs -a tc_tunnel
#447/1 tc_tunnel/ipip_none:OK
#447/2 tc_tunnel/ipip6_none:OK
#447/3 tc_tunnel/ip6tnl_none:OK
#447/4 tc_tunnel/sit_none:OK
#447/5 tc_tunnel/vxlan_eth:OK
#447/6 tc_tunnel/ip6vxlan_eth:OK
#447/7 tc_tunnel/gre_none:OK
#447/8 tc_tunnel/gre_eth:OK
#447/9 tc_tunnel/gre_mpls:OK
#447/10 tc_tunnel/ip6gre_none:OK
#447/11 tc_tunnel/ip6gre_eth:OK
#447/12 tc_tunnel/ip6gre_mpls:OK
#447/13 tc_tunnel/udp_none:OK
#447/14 tc_tunnel/udp_eth:OK
#447/15 tc_tunnel/udp_mpls:OK
#447/16 tc_tunnel/ip6udp_none:OK
#447/17 tc_tunnel/ip6udp_eth:OK
#447/18 tc_tunnel/ip6udp_mpls:OK
#447 tc_tunnel:OK
Summary: 1/18 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251027-tc_tunnel-v3-3-505c12019f9d@bootlin.com
Fix reST warnings in
Documentation/admin-guide/pm/intel_pstate.rst caused by missing explicit
hyperlink labels for section titles.
Before this change, the following errors were printed during
`make htmldocs`:
Documentation/admin-guide/pm/intel_pstate.rst:401:
ERROR: Indirect hyperlink target (id="id6") refers to target
"passive mode", which is a duplicate, and cannot be used as a
unique reference.
Documentation/admin-guide/pm/intel_pstate.rst:517:
ERROR: Indirect hyperlink target (id="id9") refers to target
"active mode", which is a duplicate, and cannot be used as a
unique reference.
Documentation/admin-guide/pm/intel_pstate.rst:611:
ERROR: Indirect hyperlink target (id="id15") refers to target
"global attributes", which is a duplicate, and cannot be used as
a unique reference.
ERROR: Duplicate target name, cannot be used as a unique reference:
"passive mode", "active mode", "global attributes".
These errors occurred because the sections "Active Mode",
"Active Mode With HWP", "Passive Mode", and "Global Attributes"
did not define explicit hyperlink labels. As a result, Sphinx
auto-generated duplicate anchors when the same titles appeared
multiple times within the document.
Because of this, the generated HTML documentation contained
broken references such as:
`active mode <Active Mode_>`_
`passive mode <Passive Mode_>`_
`global attributes <Global Attributes_>`_
This patch adds explicit hyperlink labels for the affected sections,
ensuring all references are unique and correctly resolved.
After applying this patch, `make htmldocs` completes without
any warnings, and all hyperlinks in intel_pstate.html render properly.
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20251029134737.42229-1-swarajgaikwad1925@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Waking the device during a GT reset can lead to unintended memory
allocation, which is not allowed since GT resets occur in the reclaim
path. Prevent this by holding a PM reference while a reset is in flight.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20251022005538.828980-3-matthew.brost@intel.com
(cherry picked from commit 480b358e7d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
When trying to run bpf-based encapsulation in a s390x environment, some
parts of test_tc_tunnel.bpf.o do not encapsulate correctly the traffic,
leading to tests failures. Adding some logs shows for example that
packets about to be sent on an interface with the ip6vxlan_eth program
attached do not have the expected value 5 in the ip header ihl field,
and so are ignored by the program.
This phenomenon appears when trying to cross-compile the selftests,
rather than compiling it from a virtualized host: the selftests build
system may then wrongly pick some host headers. If <asm/byteorder.h>
ends up being picked on the host (and if the host has a endianness
different from the target one), it will then expose wrong endianness
defines (e.g __LITTLE_ENDIAN_BITFIELD instead of __BIT_ENDIAN_BITFIELD),
and it will for example mess up the iphdr structure layout used in the
ebpf program.
To prevent this, directly use the vmlinux.h header generated by the
selftests build system rather than including directly specific kernel
headers. As a consequence, add some missing definitions that are not
exposed by vmlinux.h, and adapt the bitfield manipulations to allow
building and using the program on both types of platforms.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251027-tc_tunnel-v3-2-505c12019f9d@bootlin.com
The test_tunnel.c file defines small fonctions to easily attach eBPF
programs to tc hooks, either on egress, ingress or both.
Create a shared helper in network_helpers.c so that other tests can
benefit from it.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251027-tc_tunnel-v3-1-505c12019f9d@bootlin.com
The reason for enabling FEC for an uncompressed stream on an MST link is
that the DSC compression is enabled for another stream on the same link.
For such an uncompressed stream FEC doesn't need to be supported on the
whole path until the (DP-SST) sink DPRX. For instance if a branch device
- like a monitor with an MST branch device within it - is plugged to a
DFP connector of an MST docking station and the monitor's branch
device does not support FEC, the docking station's branch device will
still enable the link to the monitor correctly, disabling the FEC on
that link as expected. Since it's been verified already that FEC is
supported for the compressed stream above, the corresponding check for
the uncompressed stream can be dropped: the check for the compressed
stream implies already that FEC is supported on the link between the
source DPTX and immediate downstream branch device. If FEC is not
supported on the whole path until the sink DPRX, FEC will be disabled by
a downstream branch device on the path as described above for the MST
dock + MST monitor configuration example.
This fixes a problem in the above MST dock + MST monitor example, where
the dock supports FEC, but the monitor doesn't support it and FEC gets
enabled on the link due to DSC getting enabled for another monitor's
stream on the same link.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14254
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251028113536.602352-1-imre.deak@intel.com
Allow pm_restrict_gfp_mask() to be called many times in a row to avoid
issues with calling dpm_suspend_start() when the GFP mask has been
already restricted.
Only the first invocation of pm_restrict_gfp_mask() will actually
restrict the GFP mask and the subsequent calls will warn if there is
a mismatch between the expected allowed GFP mask and the actual one.
Moreover, if pm_restrict_gfp_mask() is called many times in a row,
pm_restore_gfp_mask() needs to be called matching number of times in
a row to actually restore the GFP mask. Calling it when the GFP mask
has not been restricted will cause it to warn.
This is necessary for the GFP mask restriction starting in
hibernation_snapshot() to continue throughout the entire hibernation
flow until it completes or it is aborted (either by a wakeup event or
by an error).
Fixes: 449c9c0253 ("PM: hibernate: Restrict GFP mask in hibernation_snapshot()")
Fixes: 469d80a371 ("PM: hibernate: Fix hybrid-sleep")
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/linux-pm/20251025050812.421905-1-safinaskar@gmail.com/
Link: https://lore.kernel.org/linux-pm/20251028111730.2261404-1-safinaskar@gmail.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/5935682.DvuYhMxLoT@rafael.j.wysocki
the DEFINE_CLASS() macro creates an inline function and
the init args are passed down to it; since _ret is passed as an int,
whatever value is set inside the function is not visible to the caller.
Pass _ret as a pointer so its value propagates to the caller.
Fixes: c460bc2311 ("drm/xe: Introduce an xe_validation wrapper around drm_exec")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6220
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: intel-xe@lists.freedesktop.org
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251027131228.12098-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit fcb8c304f4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Illustrate how a parent driver of an auxiliary driver can take advantage
of the device context guarantees given by the auxiliary bus and
subsequently safely derive its device private data.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In ParentDriver::connect() rename parent to dev, use it for the
dev_info!() call, call pdev.vendor_() directly in the print statement
and remove the unnecessary generic type of Result.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Take advantage of the fact that if the auxiliary device is bound the
parent is guaranteed to be bound as well and implement a separate
parent() method for auxiliary::Device<Bound>.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Currently, the parent method is implemented for any Device<Ctx>, i.e.
any device context and returns a &device::Device<Normal>.
However, a subsequent patch will introduce
impl Device<Bound> {
pub fn parent() -> device::Device<Bound> { ... }
}
which takes advantage of the fact that if the auxiliary device is bound
the parent is guaranteed to be bound as well.
I.e. the behavior we want is that all device contexts that dereference
to Bound, will use the implementation above, whereas the old
implementation should only be implemented for Device<Normal>.
Hence, move the current implementation.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Guarantee that an auxiliary driver will be unbound before its parent is
unbound; there is no point in operating an auxiliary device whose parent
has been unbound.
In practice, this guarantee allows us to assume that for a bound
auxiliary device, also the parent device is bound.
This is useful when an auxiliary driver calls into its parent, since it
allows the parent to directly access device resources and its device
private data due to the guaranteed bound device context.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
An auxiliary device is guaranteed to always have a parent device (both
in C and Rust), hence don't return an Option<&auxiliary::Device> in
auxiliary::Device::parent().
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In C dev_get_drvdata() has specific requirements under which it is valid
to access the returned pointer. That is, drivers have to ensure that
(1) for the duration the returned pointer is accessed the driver is
bound and remains to be bound to the corresponding device,
(2) the returned void * is treated according to the driver's private
data type, i.e. according to what has been passed to
dev_set_drvdata().
In Rust, (1) can be ensured by simply requiring the Bound device
context, i.e. provide the drvdata() method for Device<Bound> only.
For (2) we would usually make the device type generic over the driver
type, e.g. Device<T: Driver>, where <T as Driver>::Data is the type of
the driver's private data.
However, a device does not have a driver type known at compile time and
may be bound to multiple drivers throughout its lifetime.
Hence, in order to be able to provide a safe accessor for the driver's
device private data, we have to do the type check on runtime.
This is achieved by letting a driver assert the expected type, which is
then compared to a type hash stored in struct device_private when
dev_set_drvdata() is called.
Example:
// `dev` is a `&Device<Bound>`.
let data = dev.drvdata::<SampleDriver>()?;
There are two aspects to note:
(1) Technically, the same check could be achieved by comparing the
struct device_driver pointer of struct device with the struct
device_driver pointer of the driver struct (e.g. struct
pci_driver).
However, this would - in addition the pointer comparison - require
to tie back the private driver data type to the struct
device_driver pointer of the driver struct to prove correctness.
Besides that, accessing the driver struct (stored in the module
structure) isn't trivial and would result into horrible code and
API ergonomics.
(2) Having a direct accessor to the driver's private data is not
commonly required (at least in Rust): Bus callback methods already
provide access to the driver's device private data through a &self
argument, while other driver entry points such as IRQs,
workqueues, timers, IOCTLs, etc. have their own private data with
separate ownership and lifetime.
In other words, a driver's device private data is only relevant
for driver model contexts (such a file private is only relevant
for file contexts).
Having that said, the motivation for accessing the driver's device
private data with Device<Bound>::drvdata() are interactions between
drivers. For instance, when an auxiliary driver calls back into its
parent, the parent has to be capable to derive its private data from the
corresponding device (i.e. the parent of the auxiliary device).
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ * Remove unnecessary `const _: ()` block,
* rename type_id_{store,match}() to {set,match}_type_id(),
* assert size_of::<bindings::driver_type>() >= size_of::<TypeId>(),
* add missing check in case Device::drvdata() is called from probe().
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add display MDSS and DSI configuration for QCS615 RIDE board.
QCS615 has a DP port, and DP support will be added in a later patch.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Li Liu <li.liu@oss.qualcomm.com>
Signed-off-by: Fange Zhang <fange.zhang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250903-add-display-support-for-qcs615-platform-v8-2-7971c05d1262@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add display MDSS and DSI configuration for QCS615 platform.
QCS615 has a DP port, and DP support will be added in a later patch.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Li Liu <li.liu@oss.qualcomm.com>
Signed-off-by: Fange Zhang <fange.zhang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250903-add-display-support-for-qcs615-platform-v8-1-7971c05d1262@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Due to an implementation detail in this SoC, additional passive
electrical components are required to achieve the maximum rated speed
of the SD controller when paired with a High-Speed SD Card. Without
them, the clock frequency must be limited to 37.5 MHz for link stability.
Because the reference design does not contain these components, most
(derivative) boards do not have them either. To accommodate for that,
apply the frequency limit by default and delegate lifting it to the
odd boards that do contain the necessary onboard hardware.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250908104122.2062653-5-quic_sartgarg@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update the 'model' property in the QCS615-ride device tree to include
the public board name "IQ-615 Beta EVK". This ensures consistency with
official documentation and release notes.
Signed-off-by: Xin Liu <xin.liu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251029023137.381386-1-xin.liu@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The hwspinlock acquired via hwspin_lock_request_specific() is not
released on several error paths. This results in resource leakage
when probe fails.
Switch to devm_hwspin_lock_request_specific() to automatically
handle cleanup on probe failure. Remove the manual hwspin_lock_free()
in qcom_smem_remove() as devm handles it automatically.
Fixes: 20bb6c9de1 ("soc: qcom: smem: map only partitions used by local HOST")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251029022733.255-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" during
boot. This happens due to the floor_ops tries to update the rcg
configuration even if the clock is not enabled.
The shared_floor_ops ensures that the RCG is safely parked and the new
parent configuration is cached in the parked_cfg when the clock is off.
Ensure to use the ops for the other SDCC clock instances as well.
Fixes: 39d6dcf67f ("clk: qcom: gcc: Add support for QCS615 GCC clocks")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251029-sdcc_rcg2_shared_ops-v3-1-ecf47d9601d1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The control-scb and mss-top-sysreg regions on PolarFire SoC both fulfill
multiple purposes. The former is used for mailbox functions in addition
to the temperature & voltage sensor while the latter is used for clocks,
resets, interrupt muxing and pinctrl.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Document the Always-on Subsystem side channel on the Glymur SoC.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251022-knp-soc-binding-v2-4-3cd3f390f3e2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Always-On Subsystem side channel on the Qualcomm Kaanapali
platform for communication with client found on the SoC such as
remoteprocs.
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251022-knp-soc-binding-v2-2-3cd3f390f3e2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 supports UBWC 4.0 and 4 channels LP5 memory interface. Use
the SC8280XP data structure for QCS8300 according to the specification.
Acked-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251029-qcs8300_mdss-v13-4-e8c8c4f82da2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The option list to sphinx-build via SPHINXOPTS should have higher
priority than those the wrapper comes up with.
sphinx-build will choose the latest one if there are duplicates.
To restore the behavior of Makefile era, when the documentation builds
at https://www.kernel.org/doc/html/next/ had been depending on it,
reorder the flag list.
Reported-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Closes: https://lore.kernel.org/20251007-awesome-guan-of-greatness-e6ec75@lemur/
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Closes: https://lore.kernel.org/c35e690f-0579-49cb-850c-07af98e5253a@gmail.com/
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <eaf4bfd8-fb80-45d0-b3ec-4047692ebbed@gmail.com>
Let T be the actual private driver data type without the surrounding
box, as it leaves less room for potential bugs.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This is generally useful and struct iovec is also needed for other
purposes such as ptrace.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
In principle, it is possible to use nolibc for only some object files in
a program. In that case, the startup code in _start and _start_c is not
going to be used. Add the NOLIBC_NO_RUNTIME compile time option to
disable it entirely and also remove anything that depends on it.
Doing this avoids warnings from modpost for UML as the _start_c code
references the main function from the .init.text section while it is not
inside .init itself.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Use the version of the attribute with underscores to avoid issues if
fallthrough has been defined by another header file already.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
For improved compatibility, print %m as "unknown error" when nolibc is
compiled using NOLIBC_IGNORE_ERRNO.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Using errno is not possible when NOLIBC_IGNORE_ERRNO is set. Use
sys_lseek instead of lseek as that avoids using errno.
Fixes: 665fa8dea9 ("tools/nolibc: add support for directory access")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
There is no errno variable when NOLIBC_IGNORE_ERRNO is defined. As such,
simply print the message with "unknown error" rather than the integer
value of errno.
Fixes: acab7bcdb1 ("tools/nolibc/stdio: add perror() to report the errno value")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Since commit fb01ff635e ("tools/nolibc: keep brk(), sbrk(), mmap()
away from __sysret()") the implementation of mmap() does not use the
__sysret() macro anymore.
Remove the outdated comment.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The ops.cpu_acquire/release() callbacks miss events under multiple conditions.
There are two distinct task dispatch gaps that can cause cpu_released flag
desynchronization:
1. balance-to-pick_task gap: This is what was originally reported. balance_scx()
can enqueue a task, but during consume_remote_task() when the rq lock is
released, a higher priority task can be enqueued and ultimately picked while
cpu_released remains false. This gap is closeable via RETRY_TASK handling.
2. ttwu-to-pick_task gap: ttwu() can directly dispatch a task to a CPU's local
DSQ. By the time the sched path runs on the target CPU, higher class tasks may
already be queued. In such cases, nothing on sched_ext side will be invoked,
and the only solution would be a hook invoked regardless of sched class, which
isn't desirable.
Rather than adding invasive core hooks, BPF schedulers can use generic BPF
mechanisms like tracepoints. From SCX scheduler's perspective, this is congruent
with other mechanisms it already uses and doesn't add further friction.
The main use case for cpu_release() was calling scx_bpf_reenqueue_local() when
a CPU gets preempted by a higher priority scheduling class. However, the old
scx_bpf_reenqueue_local() could only be called from cpu_release() context.
Add a new version of scx_bpf_reenqueue_local() that can be called from any
context by deferring the actual re-enqueue operation. This eliminates the need
for cpu_acquire/release() ops entirely. Schedulers can now use standard BPF
mechanisms like the sched_switch tracepoint to detect and handle CPU preemption.
Update scx_qmap to demonstrate the new approach using sched_switch instead of
cpu_release, with compat support for older kernels. Mark cpu_acquire/release()
as deprecated. The old scx_bpf_reenqueue_local() variant will be removed in
v6.23.
Reported-by: Wen-Fang Liu <liuwenfang@honor.com>
Link: https://lore.kernel.org/all/8d64c74118c6440f81bcf5a4ac6b9f00@honor.com/
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Factor out the core re-enqueue logic from scx_bpf_reenqueue_local() into a
new reenq_local() helper function. scx_bpf_reenqueue_local() now handles the
BPF kfunc checks and calls reenq_local() to perform the actual work.
This is a prep patch to allow reenq_local() to be called from other contexts.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
schedule_deferred() currently requires the rq lock to be held so that it can
use scheduler hooks for efficiency when available. However, there are cases
where deferred actions need to be scheduled from contexts that don't hold the
rq lock.
Split into schedule_deferred() which can be called from any context and just
queues irq_work, and schedule_deferred_locked() which requires the rq lock and
can optimize by using scheduler hooks when available. Update the existing call
site to use the _locked variant.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull to receive f4fa7c25f6 ("sched_ext: Fix use of uninitialized variable
in scx_bpf_cpuperf_set()") which conflicts with changes for planned
sub-sched changes.
Add G7 package state residency counter in debugfs alongside existing
G2,G6,G8,G10 states for complete power state visibility.
Signed-off-by: Mohammed Thasleem <mohammed.thasleem@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Link: https://patch.msgid.link/20251016001219.37684-1-mohammed.thasleem@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
scx_bpf_cpuperf_set() has a typo where it dereferences the local
variable @sch, instead of the global @scx_root pointer. Fix by
dereferencing the correct variable.
Fixes: 956f2b11a8 ("sched_ext: Drop kf_cpu_valid()")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit 4b66d18918.
In [1], Ross Brown reports poor performance of WCN7850 after enabling
power save. Temporarily revert the fix; it will be re-enabled once
the issue is resolved.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 4b66d18918 ("wifi: ath12k: Fix missing station power save configuration")
Reported-by: Ross Brown <true.robot.ross@gmail.com>
Closes: https://lore.kernel.org/all/CAMn66qZENLhDOcVJuwUZ3ir89PVtVnQRq9DkV5xjJn1p6BKB9w@mail.gmail.com/ # [1]
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251028060744.897198-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Clang, in particular, is not happy about dead code:
fs/namespace.c:135:37: error: unused function 'node_to_mnt_ns' [-Werror,-Wunused-function]
135 | static inline struct mnt_namespace *node_to_mnt_ns(const struct rb_node *node)
| ^~~~~~~~~~~~~~
1 error generated.
Remove a leftover from the previous cleanup.
Fixes: 7d7d164989 ("mnt: support ns lookup")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251024132336.1666382-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
For some reason we ended up limiting the number of soundwire ports to 2
in the bindings, the actual codec supports 4 rx and 5 tx ports.
Fixes: 88d0d17192 ("ASoC: dt-bindings: add bindings for pm4125 audio codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029144636.357203-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the driver supports DMA, it enqueues four DMA descriptors per
substream before the substream is started. New descriptors are enqueued in
the DMA completion callback, and each time a new descriptor is queued, the
dma_buffer_pos is incremented.
During suspend, the DMA transactions are terminated. There might be cases
where the four extra enqueued DMA descriptors are not completed and are
instead canceled on suspend. However, the cancel operation does not take
into account that the dma_buffer_pos was already incremented.
Previously, the suspend code reinitialized dma_buffer_pos to zero, but this
is not always correct.
To avoid losing any audio periods during suspend/resume and to prevent
clip sound, save the completed DMA buffer position in the DMA callback and
reinitialize dma_buffer_pos on resume.
Cc: stable@vger.kernel.org
Fixes: 1fc778f7c8 ("ASoC: renesas: rz-ssi: Add suspend to RAM support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251029141134.2556926-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
