Notably make sure the count is 0 after the return from ->drop_inode(),
provided we are going to drop.
Inspired by suspicious games played by f2fs.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Also remove the now redundant comment.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
->readpage was deprecated and reads are now on folios.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
->readpage was deprecated and reads are now on folios.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Iterate over all non-uptodate ranges of a folio mapping in a single call
to iomap_readpage_iter() instead of leaving the partial iteration to the
caller.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
iomap_adjust_read_range() assumes that the position and length passed in
are block-aligned. This is not always the case however, as shown in the
syzbot generated case for erofs. This causes too many bytes to be
skipped for uptodate blocks, which results in returning the incorrect
position and length to read in. If all the blocks are uptodate, this
underflows length and returns a position beyond the folio.
Fix the calculation to also take into account the block offset when
calculating how many bytes can be skipped for uptodate blocks.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Store the iomap_readpage_ctx bio generically as a "void *read_ctx".
This makes the read/readahead interface more generic, which allows it to
be used by filesystems that may not be block-based and may not have
CONFIG_BLOCK set.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Most callers of iomap_iter_advance() do not need the remaining length
returned. Get rid of the extra iomap_length() call that
iomap_iter_advance() does.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the read/readahead bio submission logic into a separate helper.
This is needed to make iomap read/readahead more generically usable,
especially for filesystems that do not require CONFIG_BLOCK.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the iomap_readpage_iter() bio read logic into a separate helper
function, iomap_bio_read_folio_range(). This is needed to make iomap
read/readahead more generically usable, especially for filesystems that
do not require CONFIG_BLOCK.
Additionally rename buffered write's iomap_read_folio_range() function
to iomap_bio_read_folio_range_sync() to better describe its synchronous
behavior.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add dpm_watchdog_all_cpu_backtrace module parameter which
controls all CPU backtrace dump before the DPM watchdog panics
the system.
This is expected to help understand what might have caused device
timeout.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://patch.msgid.link/20251007063551.3147937-1-senozhatsky@chromium.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The loop in tk_aux_sysfs_init() uses `i <= MAX_AUX_CLOCKS` as the
termination condition, which results in 9 iterations (i=0 to 8) when
MAX_AUX_CLOCKS is defined as 8. However, the kernel is designed to support
only up to 8 auxiliary clocks.
This off-by-one error causes the creation of a 9th sysfs entry that exceeds
the intended auxiliary clock range.
Fix the loop bound to use `i < MAX_AUX_CLOCKS` to ensure exactly 8
auxiliary clock entries are created, matching the design specification.
Fixes: 7b95663a3d ("timekeeping: Provide interface to control auxiliary clocks")
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/tencent_2376993D9FC06A3616A4F981B3DE1C599607@qq.com
Add CALL_PM_OP() macro to eliminate a repetitive code pattern in
power management generic operations.
Replace analogous driver PM callback invocation logic across all
pm_generic_*() functions with a single macro that handles the NULL
pointer checks and function calls.
This reduces code size while maintaining the same functionality and
improving code maintainability.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://patch.msgid.link/20250919124437.3075016-1-kaushlendra.kumar@intel.com
[ rjw: Subject and changelog edits, adjust white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add devicetree binding for Bosch imu smi330.
The smi330 is a combined three axis angular rate and
three axis acceleration sensor module.
Signed-off-by: Jianping Shen <Jianping.Shen@de.bosch.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix multiple warnings in enum vadc_scale_fn_type by adding a leading
'@' to the kernel-doc descriptions.
Fixed 14 warnings in this one enum, such as:
Warning: include/linux/iio/adc/qcom-vadc-common.h:123 Enum value
'SCALE_DEFAULT' not described in enum 'vadc_scale_fn_type'
Warning: ../include/linux/iio/adc/qcom-vadc-common.h:123 Enum value
'SCALE_THERM_100K_PULLUP' not described in enum 'vadc_scale_fn_type'
Warning: ../include/linux/iio/adc/qcom-vadc-common.h:123 Enum value
'SCALE_PMIC_THERM' not described in enum 'vadc_scale_fn_type'
Also prevent the warning on SCALE_HW_CALIB_INVALID by marking it
"private:" so that kernel-doc notation is not needed for it.
This leaves only one warning here, which I don't know the
appropriate description of:
qcom-vadc-common.h:125: warning: Enum value
'SCALE_HW_CALIB_PMIC_THERM_PM7' not described in enum 'vadc_scale_fn_type'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The MAX14001/MAX14002 is configurable, isolated 10-bit ADCs for multi-range
binary inputs. In addition to ADC readings, the MAX14001/MAX14002 offers
more features, like a binary comparator, a filtered reading that can
provide the average of the last 2, 4, or 8 ADC readings, and an inrush
comparator that triggers the inrush current. There is also a fault feature
that can diagnose seven possible fault conditions. And an option to select
an external or internal ADC voltage reference.
MAX14001/MAX14002 features implemented so far:
- Raw ADC reading.
- MV fault disable.
- Selection of external or internal ADC voltage reference, depending on
whether it is declared in the device tree.
Co-developed-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Marilene Andrade Garcia <marilene.agarcia@gmail.com>
Tested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device-tree documentation for MAX14001/MAX14002 ADCs.
The MAX14001/MAX14002 are isolated, single-channel analog-to-digital
converters with programmable voltage comparators and inrush current
control optimized for configurable binary input applications.
They share the same features, but in the MAX14001 the inrush trigger
threshold, current magnitude, and current duration are all programmable,
whereas in the MAX14002 these parameters are fixed.
Co-developed-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Marilene Andrade Garcia <marilene.agarcia@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Prepare for Orange Pi RV using jh7110-common.dtsi having GPIO62 assignment
different than mmc0 reset by splitting this out into each board dts.
Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The cpuset structure has a nr_subparts field which tracks the number
of child local partitions underneath a particular cpuset. Right now,
nr_subparts is only used in partition_is_populated() to avoid iteration
of child cpusets if the condition is right. So by always performing the
child iteration, we can avoid tracking the number of child partitions
and simplify the code a bit.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Separating the panic allocation from framebuffer allocation in commit
729c5f7ffa ("drm/{i915,xe}/panic: move framebuffer allocation where it
belongs") failed to deallocate the panic structure anywhere.
The fix is two-fold. First, free the panic structure in
intel_user_framebuffer_destroy() in the general case. Second, move the
panic allocation later to intel_framebuffer_init() to not leak the panic
structure in error paths (if any, now or later) between
intel_framebuffer_alloc() and intel_framebuffer_init().
v2: Rebase
Fixes: 729c5f7ffa ("drm/{i915,xe}/panic: move framebuffer allocation where it belongs")
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reported-by: Michał Grzelak <michal.grzelak@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Michał Grzelak <michal.grzelak@intel.com> # v1
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251015095135.2183415-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8f8ef09fcf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove the self-assignment statement of the intr_time_type variable.
Signed-off-by: Qiang Liu <liuqiang@kylinos.cn>
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20251017075504.143491-1-liuqiangneo@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change struct size calculation to use struct_size()
to align with new recommended practices[1] which quotes:
"Another common case to avoid is calculating the size of a structure with
a trailing array of others structures, as in:
header = kzalloc(sizeof(*header) + count * sizeof(*header->item),
GFP_KERNEL);
Instead, use the helper:
header = kzalloc(struct_size(header, item, count), GFP_KERNEL);"
Signed-off-by: Mehdi Ben Hadj Khelifa <mehdi.benhadjkhelifa@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_register_mem_region() can try to remove a region right after
publishing it. This non-atomicity is annoying. Do it in two steps
similar to io_register_mem_region(), create memory first and publish it
once the rest of the handling is done. Remove now unused
io_create_region_mmap_safe(), which was assumed to be a temporary
solution from day one.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kbuf ring is published by io_buffer_add_list(), which correctly protects
with mmap_lock, there is no need to use io_create_region_mmap_safe()
before as the region is not yet exposed to the userspace via mmap.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_free_region() tolerates empty regions but there is no reason to that
either. If the first io_create_region() in io_register_resize_rings()
fails, just return the error without attempting to clean it up.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_register_free_rings() doesn't use its "struct io_uring_params"
parameter, remove it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_create_region_mmap_safe() is only needed when the created region is
exposed to userspace code via mmap. io_register_resize_rings() creates
them locally on stack, so the no mmap_safe version of the helper is
enough.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's a good practice to validate parameters before doing any heavy stuff
like queue allocations. Do that for io_allocate_scq_urings().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A minor cleanup precomputing the sq size first instead of branching
array_size() in io_allocate_scq_urings().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use it everywhere that the wait_queue_entry is removed from the head,
and be a bit more cautious in zeroing out iw->head whenever the entry is
removed from the list.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both callers of this need the entry potentially removed, so shift the
removal into the completion side and kill it from the two callers.
While at it, add a helper for removing the wait_queue_entry based
on the passed in io_kiocb.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than do per-tw checking, which needs to dip into the task_struct
for checking flags, do it upfront before running task_work. This places
a 'cancel' member in io_tw_token_t, which is assigned before running
task_work for that given ctx.
This is both more efficient in doing it upfront rather than for every
task_work, and it means that io_should_terminate_tw() can be made
private in io_uring.c rather than need to be called by various
callbacks of task_work.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit c807ab520f ("block/mq-deadline: Add I/O priority support")
modified the behavior of request flag BLK_MQ_INSERT_AT_HEAD from
dispatching a request before other requests into dispatching a request
before other requests with the same I/O priority. This is not correct since
BLK_MQ_INSERT_AT_HEAD is used when requeuing requests and also when a flush
request is inserted. Both types of requests should be dispatched as soon
as possible. Hence, make the mq-deadline I/O scheduler again ignore the I/O
priority for BLK_MQ_INSERT_AT_HEAD requests.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Yu Kuai <yukuai@kernel.org>
Reported-by: chengkaitao <chengkaitao@kylinos.cn>
Closes: https://lore.kernel.org/linux-block/20251009155253.14611-1-pilgrimtao@gmail.com/
Fixes: c807ab520f ("block/mq-deadline: Add I/O priority support")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moalv <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for adding a second caller of this function. No functionality
has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Yu Kuai <yukuai@kernel.org>
Cc: chengkaitao <chengkaitao@kylinos.cn>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add VMX exit handlers for SEAMCALL and TDCALL to inject a #UD if a non-TD
guest attempts to execute SEAMCALL or TDCALL. Neither SEAMCALL nor TDCALL
is gated by any software enablement other than VMXON, and so will generate
a VM-Exit instead of e.g. a native #UD when executed from the guest kernel.
Note! No unprivileged DoS of the L1 kernel is possible as TDCALL and
SEAMCALL #GP at CPL > 0, and the CPL check is performed prior to the VMX
non-root (VM-Exit) check, i.e. userspace can't crash the VM. And for a
nested guest, KVM forwards unknown exits to L1, i.e. an L2 kernel can
crash itself, but not L1.
Note #2! The Intel® Trust Domain CPU Architectural Extensions spec's
pseudocode shows the CPL > 0 check for SEAMCALL coming _after_ the VM-Exit,
but that appears to be a documentation bug (likely because the CPL > 0
check was incorrectly bundled with other lower-priority #GP checks).
Testing on SPR and EMR shows that the CPL > 0 check is performed before
the VMX non-root check, i.e. SEAMCALL #GPs when executed in usermode.
Note #3! The aforementioned Trust Domain spec uses confusing pseudocode
that says that SEAMCALL will #UD if executed "inSEAM", but "inSEAM"
specifically means in SEAM Root Mode, i.e. in the TDX-Module. The long-
form description explicitly states that SEAMCALL generates an exit when
executed in "SEAM VMX non-root operation". But that's a moot point as the
TDX-Module injects #UD if the guest attempts to execute SEAMCALL, as
documented in the "Unconditionally Blocked Instructions" section of the
TDX-Module base specification.
Cc: stable@vger.kernel.org
Cc: Kai Huang <kai.huang@intel.com>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20251016182148.69085-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the approach to set up a combination of Enclustra's SoM on a carrier
board and corresponding boot-mode as single device-tree target.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Remove the binding for the generic Mercury+ AA1 on PE1 carrier board.
The removed Mercury+ AA1 on PE1 carrier board is just a particular
setup case, which is actually replaced by the set of generic Mercury+
AA1 combinations patch.
In other words a combination of a Mercury+ AA1 on a PE1 base board,
with boot mode SD card is already covered by the generic AA1
combinations. There is no further reason to keep this particular case
now in a redundantly. Thus the redundant DT setup is removed.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Remove the older socfpga_arria10_mercury_pe1.dts, since it is duplicate,
the hardware is covered by the combination of Enclustra's .dtsi files.
The older .dts was limited to only the case of having an Enclustra
Mercury+ AA1 on a Mercury+ PE1 base board, booting from sdmmc. This
functionality is provided also by the generic Enclustra dtsi and dts
files, in particular socfpga_arria10_mercury_aa1_pe1_sdmmc.dts. Since
both .dts files cover the same, the older one is to e replaced in
favor of the more modularized approach.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Update binding with combined .dts for the Mercury+ PE1, PE3 and ST1
carrier boards with the Mercury+ AA1 SoM.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Introduce support for Enclustra's Mercury+ AA1 SoM, based on Intel
Arria10. This is a flexible approach to allow for combining SoM
with carrier board .dtsi and boot-mode .dtsi in a device-tree file.
Signed-off-by: Andreas Buerkler <andreas.buerkler@enclustra.com>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Introduce Enclustra's Mercury+ SA2 SoM based on Intel Cyclone5
technology as a .dtsi file.
Signed-off-by: Andreas Buerkler <andreas.buerkler@enclustra.com>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Update the DT binding for the Enclustra Mercury+ SA1 SoM
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Introduce support for Enclustra's Mercury SA1 SoM based on Intel Cyclone5
technology as a .dtsi file.
Signed-off-by: Andreas Buerkler <andreas.buerkler@enclustra.com>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add generic Enclustra base-board support for the Mercury+ PE1, the
Mercury+ PE3 and the Mercury+ ST1 board. The carrier boards can be
freely combined with the SoMs Mercury+ AA1, Mercury SA1 and
Mercury+ SA2.
Signed-off-by: Andreas Buerkler <andreas.buerkler@enclustra.com>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add generic boot-mode support to Enclustra Arria10 and Cyclone5 boards.
Some Enclustra carrier boards need hardware adjustments specific to the
selected boot-mode.
Enclustra's Arria10 SoMs allow for booting from different media. By
muxing certain IO pins, the media can be selected. This muxing can be
done by gpios at runtime e.g. when flashing QSPI from off the
bootloader. But also to have statically certain boot media available,
certain adjustments to the DT are needed:
- SD: QSPI must be disabled
- eMMC: QSPI must be disabled, bus width can be doubled to 8 byte
- QSPI: any mmc is disabled, QSPI then defaults to be enabled
The boot media must be accessible to the bootloader, e.g. to load a
bitstream file, but also to the system to mount the rootfs and to use
the specific performance.
Signed-off-by: Andreas Buerkler <andreas.buerkler@enclustra.com>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
To collect firmware debug information, the userspace application allocates
a AMDXDNA_BO_DEV buffer object through DRM_IOCTL_AMDXDNA_CREATE_BO.
Then it associates the buffer with the hardware context through
DRM_IOCTL_AMDXDNA_CONFIG_HWCTX which requests firmware to bind the buffer
through a mailbox command. The firmware then writes the debug data into
this buffer. The buffer can be mapped into userspace so that
applications can retrieve and analyze the firmware debug information.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20251016203016.819441-1-lizhi.hou@amd.com
The following NULL pointer dereference is encountered on mount of resctrl fs
after booting a system that supports assignable counters with the
"rdt=!mbmtotal,!mbmlocal" kernel parameters:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:mbm_cntr_get
Call Trace:
rdtgroup_assign_cntr_event
rdtgroup_assign_cntrs
rdt_get_tree
Specifying the kernel parameter "rdt=!mbmtotal,!mbmlocal" effectively disables
the legacy X86_FEATURE_CQM_MBM_TOTAL and X86_FEATURE_CQM_MBM_LOCAL features
and the MBM events they represent. This results in the per-domain MBM event
related data structures to not be allocated during early initialization.
resctrl fs initialization follows by implicitly enabling both MBM total and
local events on a system that supports assignable counters (mbm_event mode),
but this enabling occurs after the per-domain data structures have been
created.
After booting, resctrl fs assumes that an enabled event can access all its
state. This results in NULL pointer dereference when resctrl attempts to
access the un-allocated structures of an enabled event.
Remove the late MBM event enabling from resctrl fs.
This leaves a problem where the X86_FEATURE_CQM_MBM_TOTAL and
X86_FEATURE_CQM_MBM_LOCAL features may be disabled while assignable counter
(mbm_event) mode is enabled without any events to support. Switching between
the "default" and "mbm_event" mode without any events is not practical.
Create a dependency between the X86_FEATURE_{CQM_MBM_TOTAL,CQM_MBM_LOCAL} and
X86_FEATURE_ABMC (assignable counter) hardware features. An x86 system that
supports assignable counters now requires support of X86_FEATURE_CQM_MBM_TOTAL
or X86_FEATURE_CQM_MBM_LOCAL.
This ensures all needed MBM related data structures are created before use and
that it is only possible to switch between "default" and "mbm_event" mode when
the same events are available in both modes. This dependency does not exist in
the hardware but this usage of these feature settings work for known systems.
[ bp: Massage commit message. ]
Fixes: 13390861b4 ("x86,fs/resctrl: Detect Assignable Bandwidth Monitoring feature details")
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/a62e6ac063d0693475615edd213d5be5e55443e6.1760560934.git.babu.moger@amd.com
