The UFS controller can be part of a power domain, so we need to allow
the relevant property 'power-domains'.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://patch.msgid.link/20251007-power-domains-scsi-ufs-dt-bindings-exynos-v1-1-1acfa81a887a@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As a best practice use kmalloc_array() to safely calculate dynamic
object sizes without overflow.
[mkp: line exceeding 100 chars, added newline]
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Link: https://patch.msgid.link/20251007065345.8853-1-bhanuseshukumar@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the new TRAILING_OVERLAP() helper to fix the following warnings:
drivers/scsi/megaraid/megaraid_sas_fusion.h:1153:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/scsi/megaraid/megaraid_sas_fusion.h:1198:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM) and a
set of MEMBERS that would otherwise follow it --in this case 'struct
MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES_DYN]' and 'struct
MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES]' in the corresponding
structures.
This overlays the trailing members onto the FAM (struct MR_LD_SPAN_MAP
ldSpanMap[];) while keeping the FAM and the start of MEMBERS aligned.
The static_assert() ensures this alignment remains, and it's
intentionally placed inmediately after the corresponding structures --no
blank line in between.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aM1E7Xa8qYdZ598N@kspp
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration (which happens to be in a union, so
we're moving the entire union) to the end of the corresponding
structure. Notice that `struct ssp_response_iu` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/scsi/isci/task.h:92:11: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aM09bpl1xj9KZSZl@kspp
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename guest_test_{phys,virt}_mem to g{p,v}a in the pre-fault memory test
to shorten line lengths and to use standard terminology.
Opportunsitically use "base_gva" in the guest code instead of "base_gpa"
to match the host side code, which now passes in "gva" (and because
referencing the virtual address avoids having to know that the data is
identity mapped).
No functional change intended.
Cc: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20251007224515.374516-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit 995412e23b ("blk-mq: Replace tags->lock with SRCU for tag
iterators") introduced the following regression:
Call trace:
__srcu_read_lock+0x30/0x80 (P)
blk_mq_tagset_busy_iter+0x44/0x300
scsi_host_busy+0x38/0x70
ufshcd_print_host_state+0x34/0x1bc
ufshcd_link_startup.constprop.0+0xe4/0x2e0
ufshcd_init+0x944/0xf80
ufshcd_pltfrm_init+0x504/0x820
ufs_rockchip_probe+0x2c/0x88
platform_probe+0x5c/0xa4
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x150
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1e0
bus_for_each_dev+0x7c/0xdc
driver_attach+0x24/0x30
bus_add_driver+0x110/0x230
driver_register+0x68/0x130
__platform_driver_register+0x20/0x2c
ufs_rockchip_pltform_init+0x1c/0x28
do_one_initcall+0x60/0x1e0
kernel_init_freeable+0x248/0x2c4
kernel_init+0x20/0x140
ret_from_fork+0x10/0x20
Fix this regression by making scsi_host_busy() check whether the SCSI
host tag set has already been initialized. tag_set->ops is set by
scsi_mq_setup_tags() just before blk_mq_alloc_tag_set() is called. This
fix is based on the assumption that scsi_host_busy() and
scsi_mq_setup_tags() calls are serialized. This is the case in the UFS
driver.
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20251007214800.1678255-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Running mmu_stress_test on a system with only one CPU is not a recipe for
success. However, there's no clear-cut reason why it absolutely
shouldn't work, so the test shouldn't completely reject such a platform.
At present, the *3/4 calculation will return zero on these platforms and
the test fails. So, instead just skip that calculation.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/20251007-b4-kvm-mmu-stresstest-1proc-v1-1-8c95aa0e30b6@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix 49 kernel-doc warnings in ib_verbs.h:
- Add struct short description for rdma_stat_desc, rdma_hw_stats.
- Fix kernel-doc format for struct members (use ':' instead of '-') for
several structs.
- Don't use "/**" kernel-doc notation for struct members in ib_device_ops
(most members are not documented and most of the kernel-doc was
not formatted correctly).
- Spell function parameters correctly in ib_dma_map_sgtable_attrs(),
ib_device_try_get(), rdma_roce_rescan_device().
- Add kernel-doc for the function parameter in
rdma_flow_label_to_udp_sport().
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251020034320.3011094-1-rdunlap@infradead.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This reverts commit 4660e50cf8.
Commit f6fd357f7a ("PCI: dwc: Prepare the driver for enabling ECAM
mechanism using iATU 'CFG Shift Feature'") enabled ECAM access by using
the config space start as DBI address.
However, this approach breaks vendor drivers that rely on the DBI address
for internal accesses, especially when the vendor config space is 256MB
aligned.
To resolve this, avoid using the DBI as the start of config space and
instead introduce a custom ECAM PCI ops implementation.
Revert the qcom specific ECAM preparation logic in 4660e50cf8 ("PCI:
qcom: Prepare for the DWC ECAM enablement") since it's no longer necessary.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251017-ecam_fix-v1-2-f6faa3d0edf3@oss.qualcomm.com
When the vendor configuration space is 256MB aligned, the DesignWare PCIe
host driver enables ECAM access and sets the DBI base to the start of the
config space. This causes vendor drivers to incorrectly program iATU
regions, as they rely on the DBI address for internal accesses.
To fix this, avoid overwriting the DBI base when ECAM is enabled. Instead,
introduce a custom pci_ops that accesses the DBI region directly for the
root bus and uses ECAM for other buses.
Fixes: f6fd357f7a ("PCI: dwc: Prepare the driver for enabling ECAM mechanism using iATU 'CFG Shift Feature'")
Reported-by: Ron Economos <re@w6rz.net>
Closes: https://lore.kernel.org/all/eac81c57-1164-4d74-a1b4-6f353c577731@w6rz.net/
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ron Economos <re@w6rz.net>
Link: https://patch.msgid.link/20251017-ecam_fix-v1-1-f6faa3d0edf3@oss.qualcomm.com
sock_{send,recv}msg() internally calls security_socket_{send,recv}msg(),
which does security checks (e.g. SELinux) for socket access against the
current task. However, _sock_xmit() in drivers/block/nbd.c may be called
indirectly from a userspace syscall, where the NBD socket access would
be incorrectly checked against the calling userspace task (which simply
tries to read/write a file that happens to reside on an NBD device).
To fix this, temporarily override creds to kernel ones before calling
the sock_*() functions. This allows the security modules to recognize
this as internal access by the kernel, which will normally be allowed.
A way to trigger the issue is to do the following (on a system with
SELinux set to enforcing):
### Create nbd device:
truncate -s 256M /tmp/testfile
nbd-server localhost:10809 /tmp/testfile
### Connect to the nbd server:
nbd-client localhost
### Create mdraid array
mdadm --create -l 1 -n 2 /dev/md/testarray /dev/nbd0 missing
After these steps, assuming the SELinux policy doesn't allow the
unexpected access pattern, errors will be visible on the kernel console:
[ 142.204243] nbd0: detected capacity change from 0 to 524288
[ 165.189967] md: async del_gendisk mode will be removed in future, please upgrade to mdadm-4.5+
[ 165.252299] md/raid1:md127: active with 1 out of 2 mirrors
[ 165.252725] md127: detected capacity change from 0 to 522240
[ 165.255434] block nbd0: Send control failed (result -13)
[ 165.255718] block nbd0: Request send failed, requeueing
[ 165.256006] block nbd0: Dead connection, failed to find a fallback
[ 165.256041] block nbd0: Receive control failed (result -32)
[ 165.256423] block nbd0: shutting down sockets
[ 165.257196] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.257736] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.258263] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.259376] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.259920] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.260628] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.261661] ldm_validate_partition_table(): Disk read failed.
[ 165.262108] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.262769] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.263697] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.264412] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.265412] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.265872] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.266378] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.267168] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.267564] md127: unable to read partition table
[ 165.269581] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.269960] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.270316] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.270913] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.271253] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.271809] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.272074] ldm_validate_partition_table(): Disk read failed.
[ 165.272360] nbd0: unable to read partition table
[ 165.289004] ldm_validate_partition_table(): Disk read failed.
[ 165.289614] nbd0: unable to read partition table
The corresponding SELinux denial on Fedora/RHEL will look like this
(assuming it's not silenced):
type=AVC msg=audit(1758104872.510:116): avc: denied { write } for pid=1908 comm="mdadm" laddr=::1 lport=32772 faddr=::1 fport=10809 scontext=system_u:system_r:mdadm_t:s0-s0:c0.c1023 tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 tclass=tcp_socket permissive=0
The respective backtrace looks like this:
@security[mdadm, -13,
handshake_exit+221615650
handshake_exit+221615650
handshake_exit+221616465
security_socket_sendmsg+5
sock_sendmsg+106
handshake_exit+221616150
sock_sendmsg+5
__sock_xmit+162
nbd_send_cmd+597
nbd_handle_cmd+377
nbd_queue_rq+63
blk_mq_dispatch_rq_list+653
__blk_mq_do_dispatch_sched+184
__blk_mq_sched_dispatch_requests+333
blk_mq_sched_dispatch_requests+38
blk_mq_run_hw_queue+239
blk_mq_dispatch_plug_list+382
blk_mq_flush_plug_list.part.0+55
__blk_flush_plug+241
__submit_bio+353
submit_bio_noacct_nocheck+364
submit_bio_wait+84
__blkdev_direct_IO_simple+232
blkdev_read_iter+162
vfs_read+591
ksys_read+95
do_syscall_64+92
entry_SYSCALL_64_after_hwframe+120
]: 1
The issue has started to appear since commit 060406c61c ("block: add
plug while submitting IO").
Cc: Ming Lei <ming.lei@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2348878
Fixes: 060406c61c ("block: add plug while submitting IO")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The negation operator is incorrectly placed outside the unlikely()
macro:
if (!unlikely(iwa))
This inverts the compiler branch prediction hint, marking the NULL case
as likely instead of unlikely. The intent is to indicate that allocation
failures are rare, consistent with common kernel patterns.
Moving the negation inside unlikely():
if (unlikely(!iwa))
Fixes: 2b4fc4cd43 ("io_uring/waitid: setup async data in the prep handler")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Agilex5 includes an ARM SMMU v3 (System Memory Management Unit) to provide
address translation and memory protection for DMA-capable devices such as
PCIe, USB, and other peripherals.
This commit adds the SMMU node to the Agilex5 device tree with compatible
string "arm,smmu-v3", along with its register space and interrupts.
The SMMU is required to:
- Enable DMA address translation for devices that cannot directly access
the full physical memory space.
- Provide isolation and memory protection by restricting device access
to specific regions of memory, improving system security.
- Support virtualization use cases by enabling safe and isolated device
passthrough to guest VMs.
- Align with ARM platform architecture requirements for IOMMU support.
By describing the SMMU in the device tree, the Linux IOMMU framework
can probe and initialize it during boot. Devices in the system can then
bind to the SMMU via the `iommus` property, enabling memory translation
and protection features as expected.
The following devices are updated to reference the SMMU:
- NAND controller
- DMA controller
- SPI controller
This change is a necessary step toward full enablement high-speed
peripherals on Agilex5.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Agilex5 integrates an ARM SMMU v3 (System Memory Management Unit) with
dedicated Translation Buffer Units (TBUs) assigned to various peripherals,
including the Synopsys DesignWare AXI DMA controller.
Each TBU handles address translation for its associated device by mapping
stream IDs to memory access permissions and virtual-to-physical address
mappings via the SMMU core.
The DesignWare AXI DMAC instances on Agilex5 are connected to their
respective TBUs. These TBUs forward DMA transactions from the controller
through the SMMU, enabling IOMMU-based features such as:
- Address translation for DMA operations
- Isolation and protection of memory regions accessed by the DMA controller
- Support for secure and virtualized environments through enforced access
control
To support this configuration, the `iommus` property must be added to the
binding schema for `snps,dw-axi-dmac`. This allows the device tree to
associate each DMA controller with the correct SMMU stream ID, enabling
the Linux IOMMU framework to configure translation contexts at runtime.
This change documents the IOMMU support for the DMA controller on Agilex5
and allows proper integration with the SMMUv3 hardware.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Since the commit c1f3f9797c ("can: netlink: can_changelink(): fix NULL
pointer deref of struct can_priv::do_set_mode"), the automatic restart
delay can only be set for devices that implement the restart handler struct
can_priv::do_set_mode. As it makes no sense to configure a automatic
restart for devices that doesn't support it.
However, since systemd commit 13ce5d4632e3 ("network/can: properly handle
CAN.RestartSec=0") [1], systemd-networkd correctly handles a restart delay
of "0" (i.e. the restart is disabled). Which means that a disabled restart
is always configured in the kernel.
On systems with both changes active this causes that CAN interfaces that
don't implement a restart handler cannot be brought up by systemd-networkd.
Solve this problem by allowing a delay of "0" to be configured, even if the
device does not implement a restart handler.
[1] 13ce5d4632
Cc: stable@vger.kernel.org
Cc: Andrei Lalaev <andrey.lalaev@gmail.com>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/all/20251020-certain-arrogant-vole-of-sunshine-141841-mkl@pengutronix.de
Fixes: c1f3f9797c ("can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode")
Link: https://patch.msgid.link/20251020-netlink-fix-restart-v1-1-3f53c7f8520b@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Agilex5 integrates an ARM SMMU (System Memory Management Unit) with
Translation Buffer Units (TBUs) assigned to various peripherals,
including the NAND controller.
The Cadence HP NAND controller ("cdns,hp-nfc") on Agilex5 is behind a
TBU connected to the system's SMMUv3. To support this, the controller
requires an `iommus` property in the device tree to properly configure
address translation through the IOMMU framework.
Adding the `iommus` property to the binding schema allows the OS
to associate the NAND controller with its corresponding SMMU stream ID.
This enables:
- DMA address translation between the controller and system memory
- Memory protection for NAND operations
- Proper functioning of the IOMMU framework in secure or virtualized
environments
This change documents the IOMMU integration for the NAND controller
on platforms like Agilex5 where such hardware is present.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Marc Kleine-Budde <mkl@pengutronix.de> says:
I notived that 3 drivers (bxcan, esd and rockchip) use the function
can_dropped_invalid_skb(), that doesn't check if the device is in listen
only mode. This series converts these driver to use the new
can_dev_dropped_skb() function.
Link: https://patch.msgid.link/20251017-fix-skb-drop-check-v1-0-556665793fa4@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
After a reply on the mailing lists [1] it emerged that the DT
property "firmware-name" should not be relied on because of
possible issues with firmware versions.
For MediaTek SCP, there has never been any firmware version vs
driver version desync issue but, regardless, the firmwares are
always using the same name and they're always located in a path
with a specific pattern.
Instead of unconditionally always relying on the firmware-name
devicetree property to get a path to the SCP FW file, drivers
should construct a name based on what firmware it knows and
what hardware it is running on.
In order to do that, add a `scp_get_default_fw_path()` function
that constructs the path and filename based on two of the infos
that the driver can get:
1. The compatible string with the highest priority (so, the
first one at index 0); and
2. The type of SCP HW - single-core or multi-core.
This means that the default firmware path is generated as:
- Single core SCP: mediatek/(soc_model)/scp.img
for example: mediatek/mt8183/scp.img;
- Multi core SCP: mediatek/(soc_model)/scp_c(core_number).img
for example: mediatek/mt8188/scp_c0.img for Core 0, and
mediatek/mt8188/scp_c1.img for Core 1.
Note that the generated firmware path is being used only if the
"firmware-name" devicetree property is not present in the SCP
node or in the SCP Core node(s).
[1 - Reply regarding firmware-name property]
Link: https://lore.kernel.org/all/7e8718b0-df78-44a6-a102-89529d6abcce@app.fastmail.com/
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20251015084103.10737-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add Intel Arrow Lake-H PCI ID to the driver list of supported devices.
This is the same controller found in previous generations.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20251020145415.3377022-3-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the recent hardware the flash component density can be increased to
128M. Update the driver to support this. While there log a warning if we
encounter an unsupported value in this field.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20251020145415.3377022-2-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recast Steven Price as Panfrost driver maintainer.
Also add Adrian Larumbe in the same role.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-13-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
panfrost_job_* prefixed functions in panfrost_job.c deal with both
panfrost_job objects and also the more general JM (Job Manager) side of
the device itself. This is confusing.
Reprefix functions that program the JM to panfrosot_jm_* instead.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-12-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
The as_in_use_mask device state variable is no longer in use.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-11-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
This is to make LLVM syntactic analysers happy.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-10-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Rather than remasking interrupts after a device reset in the main reset
path, allow selecting whether to do this with an additional bool parameter.
To this end, split reenabling job interrupts into two functions, one that
clears the interrupts and another one which unmasks them conditionally.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-9-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Up until now, panfrost_job_enable_interrupts() would always recalculate the
same job IRQ enablement mask, which is effectively a constant.
Replace it with a compile-time constant value, and also in another couple
places where an equivalent expression was being used.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-8-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
When mapping the pages of a BO, either a heap type at page fault time or
else a non-heap BO at object creation time, if the ARM page table mapping
function fails, we unmap what had been mapped so far and bail out.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-7-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
In the MMU's page fault ISR for a heap object, determine whether the
faulting address belongs to a 2MiB block that was already mapped by
checking its corresponding sgt in the Panfrost BO.
This is done in preparation for a future commit in which the MMU mapping
helper might fail, but the page array is left populated, so this cannot
be used as a check for an early bail-out.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-6-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
If we reach the beginning of the LRU AS list, then return an error.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-5-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Avoid waiting for the DRM scheduler job timedout handler, and instead, let
the DRM scheduler core signal the error fence immediately when HW job
submission fails.
That means we must also decrement the runtime-PM refcnt for the device,
because the job will never be enqueued or inflight.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-4-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Just in case we're dealing with a yet not recognised device.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-3-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Drop the deprecated DRM driver allocation method in favour of
devm_drm_dev_alloc(). Overall just make it the same as in Panthor.
Also discard now superfluous generic and platform device pointers inside
the main panfrost device structure.
Some ancient checkpatch issues unearthed as a result of these changes
were also fixed, like lines too long or double assignment in one line.
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20251019145225.3621989-2-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Add device tree for 100ASK DShanPi A1 with Rockchip RK3576 SoC
(4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). Enables
basic booting and connectivity.
Link: https://wiki.dshanpi.org/en/docs/DshanPi-A1/intro/
The device contains the following hardware that is tested/working:
- 32 or 64GB eMMC
- SDMMC card slot
- M.2 WiFi slot
- 4 or 8GB of RAM
- 2x 1Gbps Ethernet
- 2x USB 3.2 Gen 1 Type-A ports
- USB 3.0 port
- HDMI port
Signed-off-by: Hsun Lai <i@chainsx.cn>
Link: https://patch.msgid.link/77BB123A1F1E3D11+20251014021623.286121-3-i@chainsx.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
LinkEase EasePi R1 is a high-performance mini router based on RK3568.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
Link: https://patch.msgid.link/20251014051226.64255-3-jjm2473@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
LinkEase is a company focusing on the research and development of
network equipment and related software and hardware from Shenzhen.
Add vendor prefix for it.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
Link: https://patch.msgid.link/20251014051226.64255-2-jjm2473@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use min_t() instead of min() to resolve compiler warnings for mismatched
types.
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251015153715.184143-1-youssef.abdulrahman@oss.qualcomm.com
Use check_add_overflow instead of size_add in sahara when
64b types are being added to ensure compatibility with 32b
systems. The size_add function parameters are of size_t, so
64b data types may be truncated when cast to size_t on 32b
systems. When using check_add_overflow, no type casts are made,
making it a more portable option.
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251015165408.213645-1-youssef.abdulrahman@oss.qualcomm.com
Do some clean up before returning the error code.
Fixes: 281c97376c ("ASoC: codecs: va-macro: Rework version checking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/aPMyw_ryay9LA5SW@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
The VOP2 has limitations on its input and output sizes. The clipped
display region must be at least 4px in each dimension for both
framebuffer source and plane destination, and the clipped source region
must be no greater than a per-version limit.
It is never valid for VOP2 to have a framebuffer which is less than four
pixels in either dimension, so declare that as our min width/height,
enforced by AddFB failing if the user tries. It can theoretically be
valid to have a single large framebuffer of which only certain clipped
regions are shown, but this is a very uncommon case. Declaring to
userspace that the framebuffer's maximum width and height is the maximum
source clip helps it make better decisions as to which mode to use,
instead of trying unsupported sizes and having to fall back.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251015110042.41273-3-daniels@collabora.com
