When using GPUVM in immediate mode, it is necessary to call
drm_gpuvm_unlink() from the fence signalling critical path. However,
unlink may call drm_gpuvm_bo_put(), which causes some challenges:
1. drm_gpuvm_bo_put() often requires you to take resv locks, which you
can't do from the fence signalling critical path.
2. drm_gpuvm_bo_put() calls drm_gem_object_put(), which is often going
to be unsafe to call from the fence signalling critical path.
To solve these issues, add a deferred version of drm_gpuvm_unlink() that
adds the vm_bo to a deferred cleanup list, and then clean it up later.
The new methods take the GEMs GPUVA lock internally rather than letting
the caller do it because it also needs to perform an operation after
releasing the mutex again. This is to prevent freeing the GEM while
holding the mutex (more info as comments in the patch). This means that
the new methods can only be used with DRM_GPUVM_IMMEDIATE_MODE.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20251006-vmbo-defer-v4-1-30cbd2c05adb@google.com
[aliceryhl: fix formatting of vm_bo = llist_entry(...) line]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Radxa E20C provides one of its GbE ports through RTL8111H connected to
SoC's PCIe controller. Let's enable the controller and the PHY used by
it to allow usage of the port.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://patch.msgid.link/20250918153057.56023-4-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Describes the PCIe Gen2x1 controller integrated in RK3528 SoC. The SoC
doesn't provide a separate MSI controller, thus the one integrated in
designware PCIe IP must be used.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patch.msgid.link/20250918153057.56023-3-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The callbacks in enabled_monitors_seq_ops are inconsistent. Some treat the
iterator as struct rv_monitor *, while others treat the iterator as struct
list_head *.
This causes a wrong type cast and crashes the system as reported by Nathan.
Convert everything to use struct list_head * as iterator. This also makes
enabled_monitors consistent with available_monitors.
Fixes: de090d1cca ("rv: Fix wrong type cast in enabled_monitors_next()")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/linux-trace-kernel/20250923002004.GA2836051@ax162/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20251002082235.973099-1-namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to directly convert
a pci::IrqVector into a generic IrqRequest, instead of taking the
indirection via an unrelated pci::Device method.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add DDR Perf Monitor for i.MX94.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This board is similar to the already upstream
imx8mp-skov-recv-tian-g07017.dts but uses a different 10" panel with a
different touch controller.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In preparation for adding a new device tree variant with a different
panel, describe the DT compatible in the binding.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Replace verbatim license text with a `SPDX-License-Identifier`.
The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).
Cc: Andrej Rosano <andrej@inversepath.com>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Acked-by: Andrej Rosano <andrej.rosano@reversec.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mass production lx2160 rev2 use designware PCIe Controller. Old Rev1
which use mobivel PCIe controller was not supported. Although uboot
fixup can change compatible string fsl,lx2160a-pcie to fsl,ls2088a-pcie
since 2019, it is quite confused and should correctly reflect hardware
status in dtb. Change freescale's board to use rev2's dtsi firstly.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
kvm_arch_vcpu_ioctl_set_fpu() always returns 0 and the local return
variable 'ret' is not used anymore. Remove it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Since we are no longer switching from a BSCA to a ESCA we can completely
get rid of the sca_lock. The write lock was only taken for that
conversion.
After removal of the lock some local code cleanups are possible.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Suggested-by: Janosch Frank <frankja@linux.ibm.com>
[frankja@linux.ibm.com: Added suggested-by tag as discussed on list]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
All modern IBM Z and Linux One machines do offer support for the
Extended System Control Area (ESCA). The ESCA is available since the
z114/z196 released in 2010.
KVM needs to allocate and manage the SCA for guest VMs. Prior to this
change the SCA was setup as Basic SCA only supporting a maximum of 64
vCPUs when initializing the VM. With addition of the 65th vCPU the SCA
was needed to be converted to a ESCA.
Instead of allocating a BSCA and upgrading it for PV or when adding the
65th cpu we can always allocate the ESCA directly upon VM creation
simplifying the code in multiple places as well as completely removing
the need to convert an existing SCA.
In cases where the ESCA is not supported (z10 and earlier) the use of
the SCA entries and with that SIGP interpretation are disabled for VMs.
This increases the number of exits from the VM in multiprocessor
scenarios and thus decreases performance.
The same is true for VSIE where SIGP is currently disabled and thus no
SCA entries are used.
The only downside of the change is that we will always allocate 4 pages
for a 248 cpu ESCA instead of a single page for the BSCA per VM.
In return we can delete a bunch of checks and special handling depending
on the SCA type as well as the whole BSCA to ESCA conversion.
With that behavior change we are no longer referencing a bsca_block in
kvm->arch.sca. This will always be esca_block instead.
By specifying the type of the sca as esca_block we can simplify access
to the sca and get rid of some helpers while making the code clearer.
KVM_MAX_VCPUS is also moved to kvm_host_types to allow using this in
future type definitions.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
In the main loop of mvebu_gpio_irq_handler() some calls to
irq_find_mapping() can be saved.
There is no point to find an irq number before checking if this something
has to be done.
By testing first, some calls can be saved.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7190f5def0489ed3f40435449c86cd7c710e6dd4.1760862679.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for module reset handling on the RZ/T2H SoC. Unlike earlier
CPG/MSSR variants, RZ/T2H uses a unified set of Module Reset Control
Registers (MRCR) where both reset and deassert actions are done via
read-modify-write (RMW) to the same register.
Introduce a new MRCR offset table (mrcr_for_rzt2h) for RZ/T2H and assign
it to reset_regs. For this SoC, the number of resets is based on the
number of MRCR registers rather than the number of module clocks. Also
add cpg_mrcr_reset_ops to implement reset, assert, and deassert using RMW
while holding the spinlock. This follows the RZ/T2H requirements, where
processing after releasing a module reset must be secured by performing
seven dummy reads of the same register, and where a module that is reset
and released again must ensure the target bit in the Module Reset Control
Register is set to 1.
Update the reset controller registration to select cpg_mrcr_reset_ops for
RZ/T2H, while keeping the existing cpg_mssr_reset_ops for other SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20250929112324.3622148-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()
This patch fixes this cocci report:
./platform/renesas/rcar_fdp1.c:2303:4-11: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Refresh the defconfig for Renesas ARM systems:
- Drop CONFIG_SCHED_MC=y (auto-enabled since commit 7bd291abe2
("sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig")),
- Disable CONFIG_SCHED_SMT (auto-enabled since commit 7bd291abe2
("sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig")),
- Restore CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1 (default changed to
zero (auto-detect) in commit 1c4b87c921
("clocksource/drivers/arm_global_timer: Add auto-detection for
initial prescaler values")),
- Disable CONFIG_RPCSEC_GSS_KRB5 (auto-enabled since commit
d8e97cc476 ("SUNRPC: Make RPCSEC_GSS_KRB5 select CRYPTO
instead of depending on it")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d0fcc82fb294021bf96f8a490234165e15aadb43.1760530468.git.geert+renesas@glider.be
The probe messages currently print "using AI" and "using no AI",
which can be confusing to users unfamiliar with the datasheet term.
Clarify these by spelling out "auto increment", which is the meaning
of the AI bit described in the register map.
No functional change, only clearer log wording and matching comment
update.
Signed-off-by: Michael Roth <mail@mroth.net>
Link: https://lore.kernel.org/r/20251018101404.3630905-1-mail@mroth.net
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since the channel list is used in different contexts, it must be ensured
that it is always consistent. Also, the channels contained in the list may
only be released when they are no longer needed in any context.
Add a lock to protect the list and reference handling for the channels.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Under certain circumstances, not every message written by the MCU to the
status mailbox may trigger a corresponding interrupt. This is likely when
multiple messages are generated in a very short period of time. Since the
current implementation only processes one message per interrupt, even if
multiple messages are already available in the mailbox, expected messages
are either not received or are processed late. This leads to various
subsequent problems and causes the driver to no longer function properly.
The behavior has been adjusted so that after an interrupt, all messages
available in the mailbox are processed.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This message can be helpful for troubleshooting and there is already a
corresponding message in case of a channel destroy timeout.
Add a similar message for channel creation.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Complete the "TODO: PROFILES" by enforcing profile-specific and
monochrome constraints as defined by the AV1 specification
(Section 5.5.2, "Color config syntax").
The validator now checks:
- Flags: reject any unknown bits set in sequence->flags
- Profile range: only profiles 0..2 are valid
- Profile 0: 8/10-bit only, subsampling must be 4:2:0 (sx=1, sy=1),
monochrome allowed
- Profile 1: 8/10-bit only, subsampling must be 4:4:4 (sx=0, sy=0),
monochrome forbidden
- Profile 2:
* 8/10-bit: only 4:2:2 allowed (sx=1, sy=0)
* 12-bit: 4:4:4 (sx=0, sy=0), 4:2:2 (sx=1, sy=0), or 4:2:0 (sx=1, sy=1)
allowed
- Monochrome path (all profiles except 1): forces subsampling_x=1,
subsampling_y=1, separate_uv_delta_q=0
These checks prevent userspace from providing invalid AV1 sequence
headers that would otherwise be accepted, leading to undefined driver
or hardware behavior.
Signed-off-by: Pavan Bobba <opensource206@gmail.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
vpu_get_plat_device() increases the reference count of the returned
platform device. However, when devm_kzalloc() fails, the reference
is not released, causing a reference leak.
Fix this by calling put_device() on fw_pdev->dev before returning
on the error path.
Fixes: e25a89f743 ("media: mtk-vcodec: potential dereference of null pointer")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
To avoid accessing the VPU register after release of the VPU core,
cancel the message work and destroy the workqueue that handles the
VPU message before release of the VPU core.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Currently the function vpu_vb_is_codecconfig() always returns 0.
Delete it and its related code.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix the Hantro G2 HEVC decoder so that we use DPB index 0 whenever a
ninvalid index is received from user space. This protects the hardware
from doing faulty memory access which then leads to bus errors.
To be noted that when a reference is missing, userspace such as GStreamer
passes an invalid DPB index of 255. This issue was found by seeking to a
CRA picture using GStreamer. The framework is currently missing the code
to skip over RASL pictures placed after the CRA. This situation can also
occur while doing live streaming over lossy transport.
Fixes: cb5dd5a0fa ("media: hantro: Introduce G2/HEVC decoder")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In some seek stress tests, we are getting IRQ from the G2 decoder where
the dec_bus_int and the dec_e bits are high, meaning the decoder is
still running despite the error.
Fix this by reworking the IRQ handler to only finish the job once we
have reached completion and move the software reset to when our software
watchdog triggers.
This way, we let the hardware continue on errors when it did not self
reset and in worse case scenario the hardware timeout will
automatically stop it. The actual error will be fixed in a follow up
patch.
Fixes: 3385c514ec ("media: hantro: Convert imx8m_vpu_g2_irq to helper")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Make sure to drop the references taken when looking up the subsys
devices during probe on probe failure (e.g. probe deferral) and on
driver unbind.
Similarly, drop the SCP device reference after retrieving its platform
data during probe to avoid leaking it.
Note that holding a reference to a device does not prevent its driver
data from going away.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Cc: stable@vger.kernel.org # 6.1
Cc: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Previously a mutex was added to protect the encoder and decoder context
lists from unexpected changes originating from the SCP IP block, causing
the context pointer to go invalid, resulting in a NULL pointer
dereference in the IPI handler.
Turns out on the MT8173, the VPU IPI handler is called from hard IRQ
context. This causes a big warning from the scheduler. This was first
reported downstream on the ChromeOS kernels, but is also reproducible
on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though
the actual capture format is not supported, the affected code paths
are triggered.
Since this lock just protects the context list and operations on it are
very fast, it should be OK to switch to a spinlock.
Fixes: 6467cda18c ("media: mediatek: vcodec: adding lock to protect decoder context list")
Fixes: afaaf3a0f6 ("media: mediatek: vcodec: adding lock to protect encoder context list")
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add the GS101 CPU clocks exposed through the ACPM protocol.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20250924-acpm-dvfs-dt-v4-2-3106d49e03f5@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Make the ACPM node a clock provider by adding the mandatory
"#clock-cells" property, which allows devices to reference
its clock outputs.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20250924-acpm-dvfs-dt-v4-1-3106d49e03f5@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Extend the Google Tensor SoC support list of files to include the
GS101 ACPM clock bindings. Add the ACPM clock driver under the
Samsung Exynos ACPM Protocol entry.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20251010-acpm-clk-v6-6-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add the Exynos ACPM clock driver. It provides support for clocks that
are controlled by firmware that implements the ACPM interface.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-4-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Register by hand a platform device for the ACPM clocks.
The ACPM clocks are not modeled as a DT child of ACPM because:
1/ they don't have their own resources.
2/ they are not a block that can be reused. The clock identifying
data is reduced (clock ID, clock name and mailbox channel ID)
and may differ from a SoC to another.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-3-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add ACPM DVFS protocol handler. It constructs DVFS messages that
the APM firmware can understand.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-2-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The firmware exposes clocks that can be controlled via the
Alive Clock and Power Manager (ACPM) interface.
Make the ACPM node a clock provider by adding the mandatory
"#clock-cells" property, which allows devices to reference its
clock outputs.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-1-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Intel Wildcat Lake derives its Thunderbolt/USB4 controller from Lunar
Lake platform. Add Wildcat Lake PCI ID to the driver list of supported
devices.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fix presumed copy-paste typo of tb_eeprom_ctl_read documentation
referring to tb_eeprom_ctl_write.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
devm_pm_runtime_enable() is used in the probe, so pm_runtime_disable()
should not be called explicitly in the remove function.
Fixes: 1c72774df0 ("PCI: sg2042: Add Sophgo SG2042 PCIe driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # on Pioneerbox.
Acked-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/242eca0ff6601de7966a53706e9950fbcb10aac8.1759169586.git.christophe.jaillet@wanadoo.fr
Sometimes, the result of the rhashtable_lookup() is expected to be found.
Therefore, we can use likely() for such cases.
Following new functions are introduced, which will use likely or unlikely
during the lookup:
rhashtable_lookup_likely
rhltable_lookup_likely
A micro-benchmark is made for these new functions: lookup a existed entry
repeatedly for 100000000 times, and rhashtable_lookup_likely() gets ~30%
speedup.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit afddce13ce ("crypto: api - Add reqsize to crypto_alg")
introduced cra_reqsize field in crypto_alg struct to replace type
specific reqsize fields. It looks like this was introduced specifically
for ahash and acomp from the commit description as subsequent commits
add necessary changes in these alg frameworks.
However, this is being recommended for use in all crypto algs
instead of setting reqsize using crypto_*_set_reqsize(). Using
cra_reqsize in aead algorithms, hence, causes memory corruptions and
crashes as the underlying functions in the algorithm framework have not
been updated to set the reqsize properly from cra_reqsize. [1]
Add proper set_reqsize calls in the aead init function to properly
initialize reqsize for these algorithms in the framework.
[1]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b
Fixes: afddce13ce ("crypto: api - Add reqsize to crypto_alg")
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- CAAM supports two types of protected keys:
-- Plain key encrypted with ECB
-- Plain key encrypted with CCM
Due to robustness, default encryption used for protected key is CCM.
- Generate protected key blob and add it to trusted key payload.
This is done as part of sealing operation, which is triggered
when below two operations are requested:
-- new key generation
-- load key,
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a section in trusted key document describing the protected-keys.
- Detailing need for protected keys.
- Detailing the usage for protected keys.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Events with an X modifier were reordered within a group, for example
slots was made the leader in:
```
$ perf record -e '{cpu/mem-stores/ppu,cpu/slots/uX}' -- sleep 1
```
Fix by making `dont_regroup` evsels always use their index for
sorting. Make the cur_leader, when fixing the groups, be that of
`dont_regroup` evsel so that the `dont_regroup` evsel doesn't become a
leader.
On a tigerlake this patch corrects this and meets expectations in:
```
$ perf stat -e '{cpu/mem-stores/,cpu/slots/uX}' -a -- sleep 0.1
Performance counter stats for 'system wide':
83,458,652 cpu/mem-stores/
2,720,854,880 cpu/slots/uX
0.103780587 seconds time elapsed
$ perf stat -e 'slots,slots:X' -a -- sleep 0.1
Performance counter stats for 'system wide':
732,042,247 slots (48.96%)
643,288,155 slots:X (51.04%)
0.102731018 seconds time elapsed
```
Closes: https://lore.kernel.org/lkml/18f20d38-070c-4e17-bc90-cf7102e1e53d@linux.intel.com/
Fixes: 035c178930 ("perf parse-events: Add 'X' modifier to exclude an event from being regrouped")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
