We use EXT4_BAD_INO for the buddy cache inode number. This inode is not
accessed via __ext4_new_inode() or __ext4_iget(), meaning
ext4_set_inode_mapping_order() is not called to set its folio order range.
However, future block size greater than page size support requires this
inode to support large folios, and the buddy cache code already handles
BS > PS. Therefore, ext4_set_inode_mapping_order() is now explicitly
called for this specific inode to set its folio order range.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-15-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, ext4_mb_init_cache() uses blocks_per_page to calculate the
folio index and offset. However, when blocksize is larger than PAGE_SIZE,
blocks_per_page becomes zero, leading to a potential division-by-zero bug.
Since we now have the folio, we know its exact size. This allows us to
convert {blocks, groups}_per_page to {blocks, groups}_per_folio, thus
supporting block sizes greater than page size.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-14-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, ext4_mb_get_buddy_page_lock() uses blocks_per_page to calculate
folio index and offset. However, when blocksize is larger than PAGE_SIZE,
blocks_per_page becomes zero, leading to a potential division-by-zero bug.
To support BS > PS, use bytes to compute folio index and offset within
folio to get rid of blocks_per_page.
Also, since ext4_mb_get_buddy_page_lock() already fully supports folio,
rename it to ext4_mb_get_buddy_folio_lock().
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-13-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, ext4_mb_load_buddy_gfp() uses blocks_per_page to calculate the
folio index and offset. However, when blocksize is larger than PAGE_SIZE,
blocks_per_page becomes zero, leading to a potential division-by-zero bug.
To support BS > PS, use bytes to compute folio index and offset within
folio to get rid of blocks_per_page.
Also, if buddy and bitmap land in the same folio, we get that folio’s ref
instead of looking it up again before updating the buddy.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-12-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As BS > PS support is coming, all block number to page index (and
vice-versa) conversions must now go via bytes. Added EXT4_LBLK_TO_PG()
and EXT4_PG_TO_LBLK() macros to simplify these conversions and handle
both BS <= PS and BS > PS scenarios cleanly.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-11-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-10-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_readdir(), page_cache_sync_readahead() is used to readahead mapped
physical blocks. With LBS support, this can lead to a negative right shift.
To fix this, the page index is now calculated by first converting the
physical block number (pblk) to a file position (pos) before converting
it to a page index. Also, the correct number of pages to readahead is now
passed.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-9-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_calculate_overhead() used a single page for its bitmap buffer, which
worked fine when PAGE_SIZE >= block size. However, with block size greater
than page size (BS > PS) support, the bitmap can exceed a single page.
To address this, we now use kvmalloc() to allocate memory of the filesystem
block size, to properly support BS > PS.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-8-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This commit introduces the s_min_folio_order field to the ext4_sb_info
structure. This field will store the minimum folio order required by the
current filesystem, laying groundwork for future support of block sizes
greater than PAGE_SIZE.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-7-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The dioread_nolock related processes already support large folio, so
dioread_nolock is enabled by default regardless of whether the blocksize
is less than, equal to, or greater than PAGE_SIZE.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-6-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When preparing for bs > ps support, clean up unnecessary PAGE_SIZE
references in ext4_punch_hole().
Previously, when a hole extended beyond i_size, we aligned the hole end
upwards to PAGE_SIZE to handle partial folio invalidation. Now that
truncate_inode_pages_range() already handles partial folio invalidation
correctly, this alignment is no longer required.
However, to save pointless tail block zeroing, we still keep rounding up
to the block size here.
In addition, as Honza pointed out, when the hole end equals i_size, it
should also be rounded up to the block size. This patch fixes that as well.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-5-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, ext4_rec_len_(to|from)_disk only performed complex rec_len
conversions when PAGE_SIZE >= 65536 to reduce complexity.
However, we are soon to support file system block sizes greater than
page size, which makes these conditional checks unnecessary. Thus, these
checks are now removed.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-4-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For bs <= ps scenarios, calculating the offset within the block is
sufficient. For bs > ps, an initial page offset calculation can lead to
incorrect behavior. Thus this redundant calculation has been removed.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-3-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For bs <= ps scenarios, calculating the offset within the block is
sufficient. For bs > ps, an initial page offset calculation can lead to
incorrect behavior. Thus this redundant calculation has been removed.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-2-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- mt76:
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- rtw89
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- rtl8xxxu: 40 MHz connection fixes/support
- brcmfmac: Acer A1 840 tablet quirk
-----BEGIN PGP SIGNATURE-----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=7c9f
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-11-27' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Apart from the usual small things just driver updates:
- mt76:
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- rtw89
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- rtl8xxxu: 40 MHz connection fixes/support
- brcmfmac: Acer A1 840 tablet quirk
* tag 'wireless-next-2025-11-27' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (152 commits)
wifi: mac80211: allow sharing identical chanctx for S1G interfaces
wifi: nl80211: vendor-cmd: intel: fix a blank kernel-doc line warning
wifi: cfg80211: include s1g_primary_2mhz when comparing chandefs
wifi: cfg80211: include s1g_primary_2mhz when sending chandef
wifi: ieee80211: correct FILS status codes
mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add()
wifi: mt76: mt792x: fix wifi init fail by setting MCU_RUNNING after CLC load
wifi: mt76: Strip whitespace from build ddate
wifi: mt76: mt7996: Add missing locking in mt7996_mac_sta_rc_work()
wifi: mt76: mt7996: skip ieee80211_iter_keys() on scanning link remove
wifi: mt76: mt7996: skip deflink accounting for offchannel links
wifi: mt76: Move mt76_abort_scan out of mt76_reset_device()
wifi: mt76: mt7996: move mt7996_update_beacons under mt76 mutex
wifi: mt76: mt7996: grab mt76 mutex in mt7996_mac_sta_event()
wifi: mt76: mt7925: ensure the 6GHz A-MPDU density cap from the hardware.
wifi: mt76: mt7996: fix EMI rings for RRO
wifi: mt76: mt7996: fix using wrong phy to start in mt7996_mac_restart()
wifi: mt76: mt7996: fix MLO set key and group key issues
wifi: mt76: mt7996: fix MLD group index assignment
wifi: mt76: mt7996: use correct link_id when filling TXD and TXP
...
====================
Link: https://patch.msgid.link/20251127103806.17776-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel message
catalog" from 2008 [1] which never made it upstream.
The macro was added to s390 code to allow for an out-of-tree patch which
used this to generate unique message ids. Also this out-of-tree patch
doesn't exist anymore.
The pattern of how the KMSG_COMPONENT macro is used can also be found at
some non s390 specific code, for whatever reasons. Besides adding an
indirection it is unused.
Remove the macro in order to get rid of a pointless indirection. Replace
all users with the string it defines. In all cases this leads to a simple
replacement like this:
- #define KMSG_COMPONENT "af_iucv"
- #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+ #define pr_fmt(fmt) "af_iucv: " fmt
[1] https://lwn.net/Articles/292650/
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20251126140705.1944278-1-hca@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix an uninitialised variable (key) in afs_alloc_anon_key() by setting it
to cell->anonymous_key. Without this change, the error check may return a
false failure with a bad error number.
Most of the time this is unlikely to happen because the first encounter
with afs_alloc_anon_key() will usually be from (auto)mount, for which all
subsequent operations must wait - apart from other (auto)mounts. Once the
call->anonymous_key is allocated, all further calls to afs_request_key()
will skip the call to afs_alloc_anon_key() for that cell.
Fixes: d27c712578 ("afs: Fix delayed allocation of a cell's anonymous key")
Reported-by: Paulo Alcantra <pc@manguebit.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: syzbot+41c68824eefb67cdf00c@syzkaller.appspotmail.com
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Clients of cs_dsp can provide optional callback function pointers, in
a struct cs_dsp_client_ops. The client had to provide a pointer to a
struct even if it didn't implement any of the callbacks.
Add basic HDR mode support for the svs I3C master driver.
Only support for private transfers and does not support sending CCC
commands in HDR mode.
Key differences:
- HDR uses commands (0x00-0x7F for write, 0x80-0xFF for read) to
distinguish transfer direction.
- HDR read/write commands must be written to FIFO before issuing the I3C
address command. The hardware automatically sends the standard CCC command
to enter HDR mode.
- HDR exit pattern must be sent instead of send a stop after transfer
completion.
- Read/write data size must be an even number.
Co-developed-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251106-i3c_ddr-v11-4-33a6a66ed095@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace the bool rnw field with a union in preparation for adding HDR
support. HDR uses a cmd field instead of the rnw bit to indicate read or
write direction.
Add helper function svc_cmd_is_read() to check transfer direction.
Add a local variable 'rnw' in svc_i3c_master_priv_xfers() to avoid
repeatedly accessing xfers[i].rnw.
No functional change.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251106-i3c_ddr-v11-3-33a6a66ed095@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Switch to use i3c_xfer instead of i3c_priv_xfer because framework update to
support HDR mode. i3c_priv_xfer is now an alias of i3c_xfer.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251106-i3c_ddr-v11-2-33a6a66ed095@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Rename struct i3c_priv_xfer to struct i3c_xfer, since private xfer in the
I3C spec refers only to SDR transfers. Ref: i3c spec ver1.2, section 3,
Technical Overview.
i3c_xfer will be used for both SDR and HDR.
Rename enum i3c_hdr_mode to i3c_xfer_mode. Previous definition need match
CCC GET_CAP1 bit position. Use 31 as SDR transfer mode.
Add i3c_device_do_xfers() with an xfer mode argument, while keeping
i3c_device_do_priv_xfers() as a wrapper that calls i3c_device_do_xfers()
with I3C_SDR for backward compatibility.
Introduce a 'cmd' field in struct i3c_xfer as an anonymous union with
'rnw', since HDR mode uses read/write commands instead of the SDR address
bit.
Add .i3c_xfers() callback for master controllers. If not implemented, fall
back to SDR with .priv_xfers(). The .priv_xfers() API can be removed once
all controllers switch to .i3c_xfers().
Add 'mode_mask' bitmask to advertise controller capability.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251106-i3c_ddr-v11-1-33a6a66ed095@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107132949.184944-1-marco.crivellari@suse.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
i3c_device_disable_ibi should be called before i3c_device_free_ibi,
however, a driver using devm actions cannot yield the call before the
bus_type.remove(), requiring to use a .remove method that is usually
discouraged for drivers that uses resources already manage. Since the
only consumer mctp-i3c.c of this method calls both
i3c_device_disable_ibi then i3c_device_free_ibi, remove the call from
the i3c_device_remove (bus_type.remove()).
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Link: https://patch.msgid.link/20251112-ibi-unsafe-v1-1-d8454db22613@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
runqslower was added in commit 9c01546d26 "tools/bpf: Add runqslower
tool to tools/bpf" as a BCC port to showcase early BPF CO-RE + libbpf
workflows. runqslower continues to live in BCC (libbpf-tools), so there
is no need to keep building and maintaining it.
Drop tools/bpf/runqslower and remove all build hooks in tools/bpf and
selftests accordingly.
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Link: https://lore.kernel.org/r/20251126093821.373291-1-hoyeon.lee@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A use-after-free bug may be triggered by calling bpf_inode_storage_get()
in a BPF LSM program hooked to file_alloc_security. Disable the hook to
prevent this from happening.
The cause of the bug is shown in the trace below. In alloc_file(), a
file struct is first allocated through kmem_cache_alloc(). Then,
file_alloc_security hook is invoked. Since the zero initialization or
assignment of f->f_inode happen after this LSM hook, a BPF program may
get a dangeld inode pointer by walking the file struct.
alloc_file()
-> alloc_empty_file()
-> f = kmem_cache_alloc()
-> init_file()
-> security_file_alloc() // f->f_inode not init-ed yet!
-> f->f_inode = NULL;
-> file_init_path()
-> f->f_inode = path->dentry->d_inode
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/1d2d1968.47cd3.19ab9528e94.Coremail.kaiyanm@hust.edu.cn/
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20251126202927.2584874-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Do not abuse the strict_alignment_once flag, and check if the map is
an instruction array inside the check_ptr_alignment() function.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20251128063224.1305482-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The original implementation added a hack to check_mem_access()
to prevent programs from writing into insn arrays. To get rid
of this hack, enforce BPF_F_RDONLY_PROG on map creation.
Also fix the corresponding selftest, as the error message changes
with this patch.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20251128063224.1305482-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Set d3cold_delay to 0 for Intel controllers because a delay is not needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-13-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for Latency Tolerance Reporting (LTR) for Intel controllers.
Implement PM ->set_latency_tolerance() callback to set LTR register values.
Also expose LTR register values via debugfs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-12-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare to add device-specific features that require cleanup
upon driver removal. Add ->exit() callback as a counterpart to ->init().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare to add more callbacks in mipi_i3c_hci_pci_info. Change ->init()
callback parameter from PCI device pointer to mipi_i3c_hci_pci_info device
pointer.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Allocate a structure for mipi_i3c_hci_pci device information, in
preparation for additional changes that need to store mipi_i3c_hci_pci
device-specific information.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
For neatness, factor out private registers ioremapping.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add const qualifier to driver data because it is constant.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use readl_poll_timeout() instead of open-coding the polling loop.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Rename some Intel-related identifiers to ensure Intel-related identifiers
begin "intel_" or INTEL_, and for brevity removing purposeless "PRIV" in
preparation to add more register definitions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move all Intel-related definitions together, to tidy the code slightly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
All Intel controllers support 64-bit DMA. Set the DMA mask accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code.
_ Properly handle SRCU readers within IRQ disabled sections in tiny SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture.
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write side
(using full RCU grace period ordering instead of simply full
ordering) as compared to "traditional" non-fast SRCU. But those
srcu-fast flavours are going to be optimized in two different
ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next cycle.
Only the new interfaces are added for now, along with related
torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering) without
waiting for the read side to tell which to use. Also this optimizes
the read side altogether with moving flavour debug checks to debug
config and with removing a costly RmW operation on their first call.
- Make some diagnostic functions tracing safe.
A disappointingly large set of device specific fixes that have built up
since I've been a bit tardy with sending a pull requests as people kept
sending me new new fixes. The bcm63xx and lpspi issues could lead to
corruption so the fixes are fairly important for the affected parts, the
other issues should all be relatively minor.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkqFaIACgkQJNaLcl1U
h9Cx4Af+N+WonkDRzn5iOEzu4dOFz4idB0mV2LkFwWgKaTXZ2G0YKwJqvWE9Yw1Z
bxOYOmJYaZAms4qOPJJVbPm38NrkjEnRdca9+zBsyu3nuvo8QLCefgLbzgwfUFcF
cy/9JPVdcOaI9yQsw0nfVa59NiddlnxWZM8iEbiUWkdG+Y6e6vkvs/iS0GutP39e
XDrCLLyfzK70Pl7PwjNtSvVAQSxIuIB6Y08Q5/ck3tdQYW48Nvf48e5NIhKp/dO1
ulIrtEYp9//pec/VRUAyNBT2JE/suDjHs+C3xeT9BLpzUlJEUq6e0yec8vtkrTiu
S2a9nMpexxTPlu9kH31PecS/seRyHg==
=8IkW
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A disappointingly large set of device specific fixes that have built
up since I've been a bit tardy with sending a pull requests as people
kept sending me new new fixes.
The bcm63xx and lpspi issues could lead to corruption so the fixes are
fairly important for the affected parts, the other issues should all
be relatively minor"
* tag 'spi-fix-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: nxp-fspi: Propagate fwnode in ACPI case as well
spi: tegra114: remove Kconfig dependency on TEGRA20_APB_DMA
spi: amlogic-spifc-a1: Handle devm_pm_runtime_enable() errors
spi: spi-fsl-lpspi: fix watermark truncation caused by type cast
spi: cadence-quadspi: Fix cqspi_probe() error handling for runtime pm
spi: bcm63xx: fix premature CS deassertion on RX-only transactions
spi: spi-cadence-quadspi: Remove duplicate pm_runtime_put_autosuspend() call
spi: spi-cadence-quadspi: Enable pm runtime earlier to avoid imbalance
A couple of fixes for incorrect device descriptions in the rtq2208
driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkqE5oACgkQJNaLcl1U
h9ByEQf/elFORcnRnri/ZOd+QqtAsO/aUtWeooGtavmayLiQEGESqjs/n0Zjb3fQ
Ajo1eUD2h11C+gEY4GTQr2iRG+/wksT5ogRB9B3TlOJ+MiQDkJsoZ4idv2UTeuqV
zZueCTBV1Kt5oGVMgMC/4atRLNLackr5xqUkl8AZ2+szDK9MTA/VGhDmU5ao6dTd
xgmXbEVGQTvOM8E+jXHEsnnHqyMIbuwXLUoDLVXvoiYww+yMqqvZCMdIqXT8Ue7W
vtc0WZmXAZ8h4EUtD/WxVH0aq5qPJEYHy9lWNPRJs9KPdmxZ1O1eAsqEygTs0+fa
zCdEKwIANV4cvkegX5Blf2qcv4L6Fg==
=/5ra
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes for incorrect device descriptions in the rtq2208
driver"
* tag 'regulator-fix-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Correct LDO2 logic judgment bits
regulator: rtq2208: Correct buck group2 phase mapping logic
Modify the dsp read and write functions of the chip and normalize
the dsp read and write functions of all awinic amplifier
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20251128130323.628091-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove array_size() calls and replace vmalloc() with vmalloc_array() in
ubifs_create_dflt_lpt()/lpt_init_rd()/lpt_init_wr(). vmalloc_array() is
optimized better, resulting in less instructions being used [1].
[1]: https://lore.kernel.org/lkml/abc66ec5-85a4-47e1-9759-2f60ab111971@vivo.com/
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The problem is that scan_fast() allocate memory for ubi->fm
and ubi->fm->e[x], but if the following attach process fails
in ubi_wl_init or ubi_read_volume_table, the whole attach
process will fail without executing ubi_wl_close to free the
memory under ubi->fm.
Fix this by add a new ubi_free_fastmap function in fastmap.c
to free the memory allocated for fm.
If SLUB_DEBUG and KUNIT are enabled, the following warning messages
will show:
ubi0: detaching mtd0
ubi0: mtd0 is detached
ubi0: default fastmap pool size: 200
ubi0: default fastmap WL pool size: 100
ubi0: attaching mtd0
ubi0: attached by fastmap
ubi0: fastmap pool size: 200
ubi0: fastmap WL pool size: 100
ubi0 error: ubi_wl_init [ubi]: no enough physical eraseblocks (4, need 203)
ubi0 error: ubi_attach_mtd_dev [ubi]: failed to attach mtd0, error -28
UBI error: cannot attach mtd0
=================================================================
BUG ubi_wl_entry_slab (Tainted: G B O L ): Objects remaining in ubi_wl_entry_slab on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Slab 0xffff2fd23a40cd00 objects=22 used=1 fp=0xffff2fd1d0334fd8 flags=0x883fffc010200(slab|head|section=34|node=0|zone=1|lastcpupid=0x7fff)
CPU: 0 PID: 5884 Comm: insmod Tainted: G B O L 5.10.0 #1
Hardware name: LS1043A RDB Board (DT)
Call trace:
dump_backtrace+0x0/0x198
show_stack+0x18/0x28
dump_stack+0xe8/0x15c
slab_err+0x94/0xc0
__kmem_cache_shutdown+0x1fc/0x39c
kmem_cache_destroy+0x48/0x138
ubi_init+0x1d4/0xf34 [ubi]
do_one_initcall+0xb4/0x24c
do_init_module+0x4c/0x1dc
load_module+0x212c/0x2260
__se_sys_finit_module+0xb4/0xd8
__arm64_sys_finit_module+0x18/0x28
el0_svc_common.constprop.0+0x78/0x1a0
do_el0_svc+0x78/0x90
el0_svc+0x20/0x38
el0_sync_handler+0xf0/0x140
normal+0x3d8/0x400
Object 0xffff2fd1d0334e68 @offset=3688
Allocated in ubi_scan_fastmap+0xf04/0xf40 [ubi] age=80 cpu=0 pid=5884
__slab_alloc.isra.21+0x6c/0xb4
kmem_cache_alloc+0x1e4/0x80c
ubi_scan_fastmap+0xf04/0xf40 [ubi]
ubi_attach+0x1f0/0x3a8 [ubi]
ubi_attach_mtd_dev+0x810/0xbc8 [ubi]
ubi_init+0x238/0xf34 [ubi]
do_one_initcall+0xb4/0x24c
do_init_module+0x4c/0x1dc
load_module+0x212c/0x2260
__se_sys_finit_module+0xb4/0xd8
__arm64_sys_finit_module+0x18/0x28
el0_svc_common.constprop.0+0x78/0x1a0
do_el0_svc+0x78/0x90
el0_svc+0x20/0x38
el0_sync_handler+0xf0/0x140
normal+0x3d8/0x400
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220744
Signed-off-by: Liyuan Pang <pangliyuan1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
