This patch prevents unnecessary programming of bits in ec_hdr and
vid_hdr that are not used or read during normal UBI operation. These
unused bits are typcially already set to 1 in erased flash and do not
need to be explicitly programmed to 0 if they are not used.
Programming such unused areas offers no functional benefit and may
result in unnecessary flash wear, reducing the overall lifetime of the
device. By skipping these writes, we preserve the flash state as much as
possible and minimize wear caused by redundant operations.
This change ensures that only necessary fields are written when preparing
UBI headers, improving flash efficiency without affecting functionality.
Additionally, the Kioxia TC58NVG1S3HTA00 datasheet (page 63) also notes
that continuous program/erase cycling with a high percentage of '0' bits
in the data pattern can accelerate block endurance degradation.
This further supports avoiding large 0x00 patterns.
Link: https://europe.kioxia.com/content/dam/kioxia/newidr/productinfo/datasheet/201910/DST_TC58NVG1S3HTA00-TDE_EN_31442.pdf
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
-----BEGIN PGP SIGNATURE-----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=uvkM
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.18-20251128' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Ensure that vectored registered buffer imports ties the lifetime of
those to the zero-copy send notification, not the parent request
- Fix a bug introduced in this merge window, with the introduction of
mixed sized CQE support
* tag 'io_uring-6.18-20251128' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix mixed cqe overflow handling
io_uring/net: ensure vectored buffer node import is tied to notification
When an error occurs, ubifs_err is used to directly print the error,
and different errors have different formats for printing. Therefore,
it's not necessary to use 'err' to locate the error occurrence.
Thus, remove the relevant assignments to 'err'.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Replace part of the code using ubifs_crc_node.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Because the variable *c is not used within the function,
remove it from the ubifs_crc_node function.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Make both handlers to be shorter and easier to understand.
While at it, unify their style.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251127190031.2998705-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOegAKCRCRxhvAZXjc
olHrAPwICALbFRDg/oj0kOFXEpUP2OrlCeKaZEMoxrKj1gZCUAEAzCATecAvZHZs
ks1d77a0z9qMvQXxISws8ByNPueTMAA=
=GH+q
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- afs: Fix delayed allocation of a cell's anonymous key
The allocation of a cell's anonymous key is done in a background
thread along with other cell setup such as doing a DNS upcall. The
normal key lookup tries to use the key description on the anonymous
authentication key as the reference for request_key() - but it may
not yet be set, causing an oops
- ovl: fail ovl_lock_rename_workdir() if either target is unhashed
As well as checking that the parent hasn't changed after getting the
lock, the code needs to check that the dentry hasn't been unhashed.
Otherwise overlayfs might try to rename something that has been
removed
- namespace: fix a reference leak in grab_requested_mnt_ns
lookup_mnt_ns() already takes a reference on mnt_ns, and so
grab_requested_mnt_ns() doesn't need to take an extra reference
* tag 'vfs-6.18-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Fix delayed allocation of a cell's anonymous key
ovl: fail ovl_lock_rename_workdir() if either target is unhashed
fs/namespace: fix reference leak in grab_requested_mnt_ns
Add a new VFIO selftest for measuring the time it takes to run
vfio_pci_device_init() in parallel for one or more devices.
This test serves as manual regression test for the performance
improvement of commit e908f58b6b ("vfio/pci: Separate SR-IOV VF
dev_set"). For example, when running this test with 64 VFs under the
same PF:
Before:
$ ./vfio_pci_device_init_perf_test -r vfio_pci_device_init_perf_test.iommufd.init 0000:1a:00.0 0000:1a:00.1 ...
...
Wall time: 6.653234463s
Min init time (per device): 0.101215344s
Max init time (per device): 6.652755941s
Avg init time (per device): 3.377609608s
After:
$ ./vfio_pci_device_init_perf_test -r vfio_pci_device_init_perf_test.iommufd.init 0000:1a:00.0 0000:1a:00.1 ...
...
Wall time: 0.122978332s
Min init time (per device): 0.108121915s
Max init time (per device): 0.122762761s
Avg init time (per device): 0.113816748s
This test does not make any assertions about performance, since any such
assertion is likely to be flaky due to system differences and random
noise. However this test can be fed into automation to detect
regressions, and can be used by developers in the future to measure
performance optimizations.
Suggested-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-19-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Eliminate INVALID_IOVA as there are platforms where UINT64_MAX is a
valid iova.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-18-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Split out the contents of libvfio.h into separate header files, but keep
libvfio.h as the top-level include that all tests can use.
Put all new header files into a libvfio/ subdirectory to avoid future
name conflicts in include paths when libvfio is used by other selftests
like KVM.
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-17-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Move the vfio_selftests_*() helpers into their own file libvfio.c. These
helpers have nothing to do with struct vfio_pci_device, so they don't
make sense in vfio_pci_device.c.
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-16-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Rename vfio_util.h to libvfio.h to match the name of libvfio.mk.
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-15-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Drop the struct vfio_pci_device wrappers for IOMMU map/unmap functions
and require tests to directly call iommu_map(), iommu_unmap(), etc. This
results in more concise code, and also makes it clear the map operations
are happening on a struct iommu, not necessarily on a specific device,
especially when multi-device tests are introduced.
Do the same for iova_allocator_init() as that function only needs the
struct iommu, not struct vfio_pci_device.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-14-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Move the IOVA allocator into its own file, to provide better separation
between the allocator and the struct vfio_pci_device helper code.
The allocator could go into iommu.c, but it is standalone enough that a
separate file seems cleaner. This also continues the trend of having a
.c for every major object in VFIO selftests (vfio_pci_device.c,
vfio_pci_driver.c, iommu.c, and now iova_allocator.c).
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-13-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Move all the IOMMU related library code into their own file iommu.c.
This provides a better separation between the vfio_pci_device helper
code and the iommu code.
No function change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-12-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Rename struct vfio_dma_region to dma_region. This is in preparation for
separating the VFIO PCI device library code from the IOMMU library code.
This name change also better reflects the fact that DMA mappings can be
managed by either VFIO or IOMMUFD. i.e. the "vfio_" prefix is
misleading.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-11-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Upgrade various logging in the VFIO selftests drivers from dev_info() to
dev_err(). All of these logs indicate scenarios that may be unexpected.
For example, the logging during probing indicates matching devices but
that aren't supported by the driver. And the memcpy errors can indicate
a problem if the caller was not trying to do something like exercise I/O
fault handling. Exercising I/O fault handling is certainly a valid thing
to do, but the driver can't infer the caller's expectations, so better
to just log with dev_err().
Suggested-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-10-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Prefix log messages with the device's BDF where relevant. This will help
understanding VFIO selftests logs when tests are run with multiple
devices.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-9-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Eliminate overly chatty logs that are printed during almost every test.
These logs are adding more noise than value. If a test cares about this
information it can log it itself. This is especially true as the VFIO
selftests gains support for multiple devices in a single test (which
multiplies all these logs).
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-8-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Support tests that want to add multiple devices to the same
container/iommufd by decoupling struct vfio_pci_device from
struct iommu.
Multi-devices tests can now put multiple devices in the same
container/iommufd like so:
iommu = iommu_init(iommu_mode);
device1 = vfio_pci_device_init(bdf1, iommu);
device2 = vfio_pci_device_init(bdf2, iommu);
device3 = vfio_pci_device_init(bdf3, iommu);
...
vfio_pci_device_cleanup(device3);
vfio_pci_device_cleanup(device2);
vfio_pci_device_cleanup(device1);
iommu_cleanup(iommu);
To account for the new separation of vfio_pci_device and iommu, update
existing tests to initialize and cleanup a struct iommu.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-7-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Introduce struct iommu, which logically represents either a VFIO
container or an iommufd IOAS, depending on which IOMMU mode is used by
the test.
This will be used in a subsequent commit to allow devices to be added to
the same container/iommufd.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-6-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Rename struct vfio_iommu_mode to struct iommu_mode since the mode can
include iommufd. This also prepares for splitting out all the IOMMU code
into its own structs/helpers/files which are independent from the
vfio_pci_device code.
No function change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-5-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Add support for passing multiple device BDFs to a test via the command
line. This is a prerequisite for multi-device tests.
Single-device tests can continue using vfio_selftests_get_bdf(), which
will continue to return argv[argc - 1] (if it is a BDF string), or the
environment variable $VFIO_SELFTESTS_BDF otherwise.
For multi-device tests, a new helper called vfio_selftests_get_bdfs() is
introduced which will return an array of all BDFs found at the end of
argv[], as well as the number of BDFs found (passed back to the caller
via argument). The array of BDFs returned does not need to be freed by
the caller.
The environment variable VFIO_SELFTESTS_BDF continues to support only a
single BDF for the time being.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-4-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Split run.sh into separate scripts (setup.sh, run.sh, cleanup.sh) to
enable multi-device testing, and prepare for VFIO selftests
automatically detecting which devices to use for testing by storing
device metadata on the filesystem.
- setup.sh takes one or more BDFs as arguments and sets up each device.
Metadata about each device is stored on the filesystem in the
directory:
${TMPDIR:-/tmp}/vfio-selftests-devices
Within this directory is a directory for each BDF, and then files in
those directories that cleanup.sh uses to cleanup the device.
- run.sh runs a selftest by passing it the BDFs of all set up devices.
- cleanup.sh takes zero or more BDFs as arguments and cleans up each
device. If no BDFs are provided, it cleans up all devices.
This split enables multi-device testing by allowing multiple BDFs to be
set up and passed into tests:
For example:
$ tools/testing/selftests/vfio/scripts/setup.sh <BDF1> <BDF2>
$ tools/testing/selftests/vfio/scripts/setup.sh <BDF3>
$ tools/testing/selftests/vfio/scripts/run.sh echo
<BDF1> <BDF2> <BDF3>
$ tools/testing/selftests/vfio/scripts/cleanup.sh
In the future, VFIO selftests can automatically detect set up devices by
inspecting ${TMPDIR:-/tmp}/vfio-selftests-devices. This will avoid the
need for the run.sh script.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-3-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Move run.sh in a new sub-directory scripts/. This directory will be used
to house various helper scripts to be used by humans and automation for
running VFIO selftests.
Opportunistically also switch run.sh from TEST_PROGS_EXTENDED to
TEST_FILES. The former is for actual test executables that are just not
run by default. TEST_FILES is a better fit for helper scripts.
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-2-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
A few last minute fixes came in this week:
- interrupt and gpio numbers in foud separate i.MX8 specific
devicetree files were wrong.
- The vector length property in the C906 CPU description
used the wrong unit.
- Two bugs with uninitialized stack variables in the tee
subsystem.
- Alexander Stein now maintains additional devicetree files.
-----BEGIN PGP SIGNATURE-----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=D1Mu
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes came in this week:
- interrupt and gpio numbers in foud separate i.MX8 specific
devicetree files were wrong
- The vector length property in the C906 CPU description used the
wrong unit
- Two bugs with uninitialized stack variables in the tee subsystem
- Alexander Stein now maintains additional devicetree files"
* tag 'soc-fixes-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: allwinner: d1: fix vlenb property
MAINTAINERS: Add entry for TQ-Systems AM335 device trees
tee: qcomtee: initialize result before use in release worker
arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity
tee: qcomtee: fix uninitialized pointers with free attribute
ARM: dts: nxp: imx6ul: correct SAI3 interrupt line
arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos
arm64: dts: imx8dxl: Correct pcie-ep interrupt number
- Fix vfio selftests to remove the expectation that the IOMMU
supports a 64-bit IOVA space. These manifest both in the original
set of tests introduced this development cycle in identity mapping
the IOVA to buffer virtual address space, as well as the more
recent boundary testing. Implement facilities for collecting the
valid IOVA ranges from the backend, implement a simple IOVA
allocator, and use the information for determining extents.
(Alex Mastro)
-----BEGIN PGP SIGNATURE-----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=ywvT
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.18-rc6' into v6.19/vfio/next
Merge mainline vfio-selftest updates for ongoing v6.19 work.
Signed-off-by: Alex Williamson <alex@shazbot.org>
Here are some much-delayed char/misc/iio driver fixes for 6.18-rc8.
Fixes in here include:
- lots of iio driver bugfixes for reported issues.
- counter driver bugfix
- slimbus driver bugfix
- mei tiny bugfix
- nvmem layout uevent bugfix
All of these have been in linux-next for a while, but due to travel on
my side, I haven't had a chance to get them to you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaSnL1g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUpACfaPn4EMLwg1fF60cmYoW0mr0RGg4An1xj6YB3
evzxFzdPf6HwPPkxSOmx
=3lRL
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO fixes from Greg KH:
"Here are some much-delayed char/misc/iio driver fixes for 6.18-rc8.
Fixes in here include:
- lots of iio driver bugfixes for reported issues.
- counter driver bugfix
- slimbus driver bugfix
- mei tiny bugfix
- nvmem layout uevent bugfix
All of these have been in linux-next for a while, but due to travel on
my side, I haven't had a chance to get them to you"
* tag 'char-misc-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits)
nvmem: layouts: fix nvmem_layout_bus_uevent
iio: accel: bmc150: Fix irq assumption regression
most: usb: fix double free on late probe failure
slimbus: ngd: Fix reference count leak in qcom_slim_ngd_notify_slaves
firmware: stratix10-svc: fix bug in saving controller data
mei: fix error flow in probe
iio: st_lsm6dsx: Fixed calibrated timestamp calculation
iio: humditiy: hdc3020: fix units for thresholds and hysteresis
iio: humditiy: hdc3020: fix units for temperature and humidity measurement
iio: imu: st_lsm6dsx: fix array size for st_lsm6dsx_settings fields
iio: accel: fix ADXL355 startup race condition
iio: adc: ad7124: fix temperature channel
iio:common:ssp_sensors: Fix an error handling path ssp_probe()
iio: adc: ad7280a: fix ad7280_store_balance_timer()
iio: buffer-dmaengine: enable .get_dma_dev()
iio: buffer-dma: support getting the DMA channel
iio: buffer: support getting dma channel from the buffer
iio: pressure: bmp280: correct meas_time_us calculation
iio: adc: stm32-dfsdm: fix st,adc-alt-channel property handling
iio: adc: ad7380: fix SPI offload trigger rate
...
Test disconnected directories with two test suites
(layout4_disconnected_leafs and layout5_disconnected_branch) and 43
variants to cover the main corner cases.
These tests are complementary to the previous commit.
Add test_renameat() and test_exchangeat() helpers.
Test coverage for security/landlock is 92.1% of 1927 lines according to
LLVM 20.
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-5-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This adds tests for the edge case discussed in [1], with specific ones
for rename and link operations when the operands are through
disconnected paths, as that go through a separate code path in Landlock.
This has resulted in a warning, due to collect_domain_accesses() not
expecting to reach a different root from path->mnt:
# RUN layout1_bind.path_disconnected ...
# OK layout1_bind.path_disconnected
ok 96 layout1_bind.path_disconnected
# RUN layout1_bind.path_disconnected_rename ...
[..] ------------[ cut here ]------------
[..] WARNING: CPU: 3 PID: 385 at security/landlock/fs.c:1065 collect_domain_accesses
[..] ...
[..] RIP: 0010:collect_domain_accesses (security/landlock/fs.c:1065 (discriminator 2) security/landlock/fs.c:1031 (discriminator 2))
[..] current_check_refer_path (security/landlock/fs.c:1205)
[..] ...
[..] hook_path_rename (security/landlock/fs.c:1526)
[..] security_path_rename (security/security.c:2026 (discriminator 1))
[..] do_renameat2 (fs/namei.c:5264)
# OK layout1_bind.path_disconnected_rename
ok 97 layout1_bind.path_disconnected_rename
Move the const char definitions a bit above so that we can use the path
for s4d1 in cleanup code.
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/027d5190-b37a-40a8-84e9-4ccbc352bcdf@maowtm.org [1]
Signed-off-by: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-4-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This is now possible thanks to the disconnected directory fix.
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Disconnected files or directories can appear when they are visible and
opened from a bind mount, but have been renamed or moved from the source
of the bind mount in a way that makes them inaccessible from the mount
point (i.e. out of scope).
Previously, access rights tied to files or directories opened through a
disconnected directory were collected by walking the related hierarchy
down to the root of the filesystem, without taking into account the
mount point because it couldn't be found. This could lead to
inconsistent access results, potential access right widening, and
hard-to-debug renames, especially since such paths cannot be printed.
For a sandboxed task to create a disconnected directory, it needs to
have write access (i.e. FS_MAKE_REG, FS_REMOVE_FILE, and FS_REFER) to
the underlying source of the bind mount, and read access to the related
mount point. Because a sandboxed task cannot acquire more access
rights than those defined by its Landlock domain, this could lead to
inconsistent access rights due to missing permissions that should be
inherited from the mount point hierarchy, while inheriting permissions
from the filesystem hierarchy hidden by this mount point instead.
Landlock now handles files and directories opened from disconnected
directories by taking into account the filesystem hierarchy when the
mount point is not found in the hierarchy walk, and also always taking
into account the mount point from which these disconnected directories
were opened. This ensures that a rename is not allowed if it would
widen access rights [1].
The rationale is that, even if disconnected hierarchies might not be
visible or accessible to a sandboxed task, relying on the collected
access rights from them improves the guarantee that access rights will
not be widened during a rename because of the access right comparison
between the source and the destination (see LANDLOCK_ACCESS_FS_REFER).
It may look like this would grant more access on disconnected files and
directories, but the security policies are always enforced for all the
evaluated hierarchies. This new behavior should be less surprising to
users and safer from an access control perspective.
Remove a wrong WARN_ON_ONCE() canary in collect_domain_accesses() and
fix the related comment.
Because opened files have their access rights stored in the related file
security properties, there is no impact for disconnected or unlinked
files.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Reported-by: Tingmao Wang <m@maowtm.org>
Closes: https://lore.kernel.org/r/027d5190-b37a-40a8-84e9-4ccbc352bcdf@maowtm.org
Closes: https://lore.kernel.org/r/09b24128f86973a6022e6aa8338945fcfb9a33e4.1749925391.git.m@maowtm.org
Fixes: b91c3e4ea7 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Fixes: cb2c7d1a17 ("landlock: Support filesystem access-control")
Link: https://lore.kernel.org/r/b0f46246-f2c5-42ca-93ce-0d629702a987@maowtm.org [1]
Reviewed-by: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Here are 2 serial driver fixes for reported issues for 6.18-rc8.
These are:
- fix for a much reported symbol build loop that broke the build for
some kernel configurations.
- amba-pl011 driver bugfix for a reported issue
Both have been in linux next (the last for weeks, the first for a
shorter amount of time), with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaSnMaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymg5QCfeiPTQKjBjgltevx4QCaxVMyoo54AmwTVgjub
iXAdo7xLL3tvpG1ubqgt
=y3e3
-----END PGP SIGNATURE-----
Merge tag 'tty-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two serial driver fixes for reported issues for 6.18-rc8.
These are:
- fix for a much reported symbol build loop that broke the build for
some kernel configurations
- amba-pl011 driver bugfix for a reported issue
Both have been in linux next (the last for weeks, the first for a
shorter amount of time), with no reported issues"
* tag 'tty-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix 8250_rsa symbol loop
serial: amba-pl011: prefer dma_mapping_error() over explicit address checking
Here are some last-minutes USB and Thunderbolt driver fixes and new
device ids for 6.18-rc8. Included in here are:
- usb storage quirk fixup
- xhci driver fixes for reported issues
- usb gadget driver fixes
- dwc3 driver fixes
- UAS driver fixup
- thunderbolt new device ids
- usb-serial driver new ids
All of these have been in linux-next with no reported issues, many for
many weeks.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaSnO0w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqyACgvNvTnpfj8lx0L9aESj6Hra0UZ20AoKlYRFW1
gAVcF4Wafnu7ehjAITXL
=cH0/
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some last-minutes USB and Thunderbolt driver fixes and new
device ids for 6.18-rc8. Included in here are:
- usb storage quirk fixup
- xhci driver fixes for reported issues
- usb gadget driver fixes
- dwc3 driver fixes
- UAS driver fixup
- thunderbolt new device ids
- usb-serial driver new ids
All of these have been in linux-next with no reported issues, many for
many weeks"
* tag 'usb-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: gadget: renesas_usbf: Handle devm_pm_runtime_enable() errors
USB: storage: Remove subclass and protocol overrides from Novatek quirk
usb: uas: fix urb unmapping issue when the uas device is remove during ongoing data transfer
usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() call paths
xhci: dbgtty: fix device unregister
usb: storage: sddr55: Reject out-of-bound new_pba
USB: serial: option: add support for Rolling RW101R-GL
usb: typec: ucsi: psy: Set max current to zero when disconnected
usb: gadget: f_eem: Fix memory leak in eem_unwrap
usb: dwc3: pci: Sort out the Intel device IDs
usb: dwc3: pci: add support for the Intel Nova Lake -S
drivers/usb/dwc3: fix PCI parent check
usb: storage: Fix memory leak in USB bulk transport
xhci: sideband: Fix race condition in sideband unregister
xhci: dbgtty: Fix data corruption when transmitting data form DbC to host
xhci: fix stale flag preventig URBs after link state error is cleared
USB: serial: ftdi_sio: add support for u-blox EVK-M101
usb: cdns3: Fix double resource release in cdns3_pci_probe
usb: gadget: udc: fix use-after-free in usb_gadget_state_work
usb: renesas_usbhs: Fix synchronous external abort on unbind
...
Speculative prefetches from CPU to GPU memory until the GPU is
ready after reset can cause harmless corrected RAS events to
be logged on Grace systems. It is thus preferred that the
mapping not be re-established until the GPU is ready post reset.
The GPU readiness can be checked through BAR0 registers similar
to the checking at the time of device probe.
It can take several seconds for the GPU to be ready. So it is
desirable that the time overlaps as much of the VM startup as
possible to reduce impact on the VM bootup time. The GPU
readiness state is thus checked on the first fault/huge_fault
request or read/write access which amortizes the GPU readiness
time.
The first fault and read/write checks the GPU state when the
reset_done flag - which denotes whether the GPU has just been
reset. The memory_lock is taken across map/access to avoid
races with GPU reset.
Also check if the memory is enabled, before waiting for GPU
to be ready. Otherwise the readiness check would block for 30s.
Lastly added PM handling wrapping on read/write access.
Cc: Shameer Kolothum <skolothumtho@nvidia.com>
Cc: Alex Williamson <alex@shazbot.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Vikram Sethi <vsethi@nvidia.com>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-7-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Introduce a new flag reset_done to notify that the GPU has just
been reset and the mapping to the GPU memory is zapped.
Implement the reset_done handler to set this new variable. It
will be used later in the patches to wait for the GPU memory
to be ready before doing any mapping or access.
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-6-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Split the function that check for the GPU device being ready on
the probe.
Move the code to wait for the GPU to be ready through BAR0 register
reads to a separate function. This would help reuse the code.
This also fixes a bug where the return status in case of timeout
gets overridden by return from pci_enable_device. With the fix,
a timeout generate an error as initially intended.
Fixes: d85f69d520 ("vfio/nvgrace-gpu: Check the HBM training and C2C link status")
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-5-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Remove code duplication in vfio_pci_core_mmap by calling
vfio_pci_core_setup_barmap to perform the bar mapping.
No functional change is intended.
Cc: Donald Dutile <ddutile@redhat.com>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-4-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
NVIDIA's Grace based systems have large device memory. The device
memory is mapped as VM_PFNMAP in the VMM VMA. The nvgrace-gpu
module could make use of the huge PFNMAP support added in mm [1].
To make use of the huge pfnmap support, fault/huge_fault ops
based mapping mechanism needs to be implemented. Currently nvgrace-gpu
module relies on remap_pfn_range to do the mapping during VM bootup.
Replace it to instead rely on fault and use vfio_pci_vmf_insert_pfn
to setup the mapping.
Moreover to enable huge pfnmap, nvgrace-gpu module is updated by
adding huge_fault ops implementation. The implementation establishes
mapping according to the order request. Note that if the PFN or the
VMA address is unaligned to the order, the mapping fallbacks to
the PTE level.
Link: https://lore.kernel.org/all/20240826204353.2228736-1-peterx@redhat.com/ [1]
Cc: Shameer Kolothum <skolothumtho@nvidia.com>
Cc: Alex Williamson <alex@shazbot.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Vikram Sethi <vsethi@nvidia.com>
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-3-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Refactor vfio_pci_mmap_huge_fault to take out the implementation
to map the VMA to the PTE/PMD/PUD as a separate function.
Export the new function to be used by nvgrace-gpu module.
Move the alignment check code to verify that pfn and VMA VA is
aligned to the page order to the header file and make it inline.
No functional change is intended.
Cc: Shameer Kolothum <skolothumtho@nvidia.com>
Cc: Alex Williamson <alex@shazbot.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-2-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
fill_sg_entry() splits large DMA buffers into multiple scatter-gather
entries, each holding up to UINT_MAX bytes. When calculating the DMA
address for entries beyond the second one, the expression (i * UINT_MAX)
causes integer overflow due to 32-bit arithmetic.
This manifests when the input arg length >= 8 GiB results in looping for
i >= 2.
Fix by casting i to dma_addr_t before multiplication.
Fixes: 3aa31a8bb1 ("dma-buf: provide phys_vec to scatter-gather mapping routine")
Signed-off-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Link: https://lore.kernel.org/r/20251125-dma-buf-overflow-v1-1-b70ea1e6c4ba@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Thanks to a device generating an ACS violation during bus reset,
lockdep reported the following circular locking issue:
CPU0: SET_IRQS (MSI/X): holds igate, acquires memory_lock
CPU1: HOT_RESET: holds memory_lock, acquires pci_bus_sem
CPU2: AER: holds pci_bus_sem, acquires igate
This results in a potential 3-way deadlock.
Remove the pci_bus_sem->igate leg of the triangle by using RCU
to peek at the eventfd rather than locking it with igate.
Fixes: 3be3a074cf ("vfio-pci: Don't use device_lock around AER interrupt setup")
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20251124223623.2770706-1-alex@shazbot.org
Signed-off-by: Alex Williamson <alex@shazbot.org>
Just one fix to correct the "thead,vlenb" property for the RISC-V based
D1 SoC family.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmkluhoQHHdlbnNAa2Vy
bmVsLm9yZwAKCRA4mlQhnA8kMAxAD/9mJbDwjSEg2ouGk6tXxXdnj8NS1qkmhbNu
3Nwc882eMroH9CQ7uj63TadXH1UxtE/f/ZOERmnDaVjB5VFWRPuvrVYrF1XChkLF
03D9PxDuFL2AghnWTYLiS3aAYEi65bphkBfbDFz4y0jZ1TZbzM1ePOf3K6Pq3QCq
AC+HXxvvZw8QMRSOabHruGMTieTdJj6k5lTYKV04ZVEmgKMtp2Wz/IvYMFC9N7Nu
PwX5+++ppP63Y/VdwLlpMJFRGcIWzC9uVdz5fYH9sHJyK/xlR11sE+n54DzvzlYl
/JpEdgSspkJ0V4hbM5N2iTiVBZ3ufjrniyrQHVYOzOVEv6dtIVewOP+cuCxD60fa
mpeCqaib5PZY+cLlhJTWzD9+s9hGsM6le99LLVM7nT96OKRsaKXm0zKjDN3YqZr/
DCJMo0Ykz86z8AnOCDfb/HdYxRV4pizUP1BWFifom4OC4OybSe+6sQXDgddrWK48
qVIEaFcd06RGw7dy2t+GmwSDxJThojKN7ayeuezhHQ99P4akapV/5rZAw4vezPdO
b8EVyV40JsDltVcI/UHhhtcYIk3O1AxGGzK4hOUEMosb5JztS2ROGHHeTVn0A2w1
IP99IlTNfyIaeEkopFAIMUNJXvzk5rd5fb0FmLZXpMtu2NtBdNM2+4SDripoxXB+
X1XNyLZADg==
=OqKr
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner fixes for 6.18
Just one fix to correct the "thead,vlenb" property for the RISC-V based
D1 SoC family.
* tag 'sunxi-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: fix vlenb property
In max16065_current_show, data->curr_sense is read twice: once for the
error check and again for the calculation. Since
i2c_smbus_read_byte_data returns negative error codes on failure, if the
data changes to an error code between the check and the use, ADC_TO_CURR
results in an incorrect calculation.
Read data->curr_sense into a local variable to ensure consistency. Note
that data->curr_gain is constant and safe to access directly.
This aligns max16065_current_show with max16065_input_show, which
already uses a local variable for the same reason.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: f5bae2642e ("hwmon: Driver for MAX16065 System Manager and compatibles")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251128124709.3876-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macros FAN_FROM_REG and TEMP_FROM_REG evaluate their arguments
multiple times. When used in lockless contexts involving shared driver
data, this causes Time-of-Check to Time-of-Use (TOCTOU) race
conditions.
Convert the macros to static functions. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: 85f03bccd6 ("hwmon: Add support for Winbond W83L786NG/NR")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251128123816.3670-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Modify kernel-doc comments in sbitmap.h to prevent warnings:
Warning: include/linux/sbitmap.h:84 struct member 'alloc_hint' not
described in 'sbitmap'
Warning: include/linux/sbitmap.h:151 struct member 'ws_active' not
described in 'sbitmap_queue'
Warning: include/linux/sbitmap.h:552 No description found for
return value of 'sbq_wait_ptr'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
