Add nodes for WSA8830 speakers and WCD9370 headset codec
on qcm6490-idp board and enable lpass macros along with
audio support pin controls.
Co-developed-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250903151337.1037246-8-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable LPASS macros (WSA, VA, RX, TX) and the lpass_tlmm clock required
for audioreach functionality. In audioreach solution mclk, npl, and fsgen
clocks are managed via the Q6PRM. On SC7280-based boards, the TX CORE
clock is used to drive both RX and WSA audio paths following as per
hardware design.
Co-developed-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250903151337.1037246-5-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce qcs6490-audioreach.dtsi to support AudioReach architecture on
QCS6490 platforms. The existing ADSP Bypass DTSI files such as sc7280.dtsi,
which is tailored for ADSP Bypass architecture as they lack DSP-specific
nodes required for AudioReach. The new qcs6490-audioreach.dtsi file defines
nodes for AudioReach specific components such as APM (Audio Process
Manager), PRM (Proxy Resource Manager), and GPR (Generic Packet Router).
This change enable the audio from the legacy ADSP Bypass solution to
the AudioReach framework.
Co-developed-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250903151337.1037246-3-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Nolibc now does have getauxval(), use it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The return value was not assigned to 'ret', so the check afterwards
does not do anything.
Fixes: 3d37d4307e ("kselftest/arm64: Add very basic GCS test program")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaL6SyQAKCRCRxhvAZXjc
ouTGAQDGiTnaENiOzRhzNl1XONTRv8a1uV0pxg4W3fNdiRlxgQEA/O90/+nM48KC
pdV3WHz5eGfcnMTpqgHxK6HYgwklJAY=
=oKnm
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"fuse:
- Prevent opening of non-regular backing files.
Fuse doesn't support non-regular files anyway.
- Check whether copy_file_range() returns a larger size than
requested.
- Prevent overflow in copy_file_range() as fuse currently only
supports 32-bit sized copies.
- Cache the blocksize value if the server returned a new value as
inode->i_blkbits isn't modified directly anymore.
- Fix i_blkbits handling for iomap partial writes.
By default i_blkbits is set to PAGE_SIZE which causes iomap to mark
the whole folio as uptodate even on a partial write. But fuseblk
filesystems support choosing a blocksize smaller than PAGE_SIZE
risking data corruption. Simply enforce PAGE_SIZE as blocksize for
fuseblk's internal inode for now.
- Prevent out-of-bounds acces in fuse_dev_write() when the number of
bytes to be retrieved is truncated to the fc->max_pages limit.
virtiofs:
- Fix page faults for DAX page addresses.
Misc:
- Tighten file handle decoding from userns.
Check that the decoded dentry itself has a valid idmapping in the
user namespace.
- Fix mount-notify selftests.
- Fix some indentation errors.
- Add an FMODE_ flag to indicate IOCB_HAS_METADATA availability.
This will be moved to an FOP_* flag with a bit more rework needed
for that to happen not suitable for a fix.
- Don't silently ignore metadata for sync read/write.
- Don't pointlessly log warning when reading coredump sysctls"
* tag 'vfs-6.17-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fuse: virtio_fs: fix page fault for DAX page address
selftests/fs/mount-notify: Fix compilation failure.
fhandle: use more consistent rules for decoding file handle from userns
fuse: Block access to folio overlimit
fuse: fix fuseblk i_blkbits for iomap partial writes
fuse: reflect cached blocksize if blocksize was changed
fuse: prevent overflow in copy_file_range return value
fuse: check if copy_file_range() returns larger than requested size
fuse: do not allow mapping a non-regular backing file
coredump: don't pointlessly check and spew warnings
fs: fix indentation style
block: don't silently ignore metadata for sync read/write
fs: add a FMODE_ flag to indicate IOCB_HAS_METADATA availability
Please enter a commit message to explain why this merge is necessary,
especially if it merges an updated upstream into a topic branch.
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-ID: <87frcx1yp5.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-ID: <87h5xd1ypa.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-ID: <87ikht1ypg.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-ID: <87jz291yrr.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace calls of devm_kzalloc() with devm_kcalloc() in master_stats_probe()
for safer memory allocation with built-in overflow protection.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250819035935.434121-1-rongqianfeng@vivo.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
configfs has a config_group_put() helper that was adopted by
commit 88df7939d7 ("drm/xe/configfs: Rename struct xe_config_device").
Another pending work to add psmi later landed in commit
afe902848b ("drm/xe/configfs: Allow to enable PSMI") and didn't use
the helper.
Use config_group_put() consistently to hide the inner workings of
configfs. No change in behavior since it does exactly the same thing
as currently being done.
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250905162236.578117-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of other structs, we use the `struct_group_tagged()` helper
to create a new tagged `struct bplus_header_fixed`. This structure
groups together all the members of the flexible `struct bplus_header`
except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct member currently causing
trouble from `struct bplus_header` to `struct bplus_header_fixed`.
We also want to ensure that when new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct bplus_header_fixed`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
We also use `container_of()` (via a wrapper) whenever we need to retrieve
a pointer to the flexible structure, through which we can access the
flexible-array member, if necessary.
So, with these changes, fix 26 of the following type of warnings:
fs/hpfs/hpfs.h:456:23: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/hpfs/hpfs.h:498:23: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
A750 GPU has similar IFPC related configurations like X1-85. Add
the IFPC QUIRK to enable IFPC feature.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673386/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add the IFPC restore register list and enable IFPC support on Adreno
X1-85 gpu.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673384/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Now with IFPC, GX domain can collapse as soon as GPU becomes IDLE. So
add gx_is_on check before accessing any GX registers during crashstate
capture and recovery.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673383/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Moving to IFPC state clears the 'Perfcounter Select' register setup
by the userspace. So, lets block the IFPC when sysprof is active by
using the perfcounter oob signal to the GMU.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673380/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
From the hangcheck handler, KMD checks a few registers in GX
domain to see if the GPU made any progress. But it cannot access
those registers when IFPC is enabled. Since HW based hang detection
is pretty decent, lets rely on it instead of these registers when
IFPC is enabled.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673378/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add a new quirk to denote IFPC (Inter-Frame Power Collapse) support
for a gpu. Based on this flag send the feature ctrl hfi message to
GMU to enable IFPC support.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673375/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Even though the GX power domain is kept ON when there is a pending GPU
interrupt, there is a small window of potential race with GMU where it
may move the AHB fence to 'Drop' mode. Once the GMU sees the pending IRQ,
it will move back the fence state to ALLOW mode. Close this race window
by polling for AHB fence to ensure that it is in 'Allow' mode.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673377/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
CP_ALWAYS_ON counter falls under GX domain which is collapsed during
IFPC. So switch to GMU_ALWAYS_ON counter for any CPU reads since it is
not impacted by IFPC. Both counters are clocked by same xo clock source.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673373/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Set Keepalive votes at appropriate places to block IFPC power collapse
until we access all the required registers. This is required during gpu
IRQ handling and also during preemption.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673369/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
There are some special registers which are accessible even when GX power
domain is collapsed during an IFPC sleep. Accessing these registers
wakes up GPU from power collapse and allow programming these registers
without additional handshake with GMU. This patch adds support for this
special register write sequence.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673368/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
With IFPC, there is a probability of accessing a GX domain register when
it is collapsed, which leads to gmu fence errors. To debug this, we need
to trace every gpu register accesses and identify the one just before a
gmu fence error. So, add an ftrace to track all gpu register accesses.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673366/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
A minor refactor to combine the subroutines for legacy a6xx GMUs under
a single check. This helps to avoid an unnecessary check and return
early from the subroutine for majority of a6xx gpus.
Also, document an intermediate unknown low power state which is not
exposed by the GMU firmware.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673364/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Since the PDC resides out of the GPU subsystem and cannot be reset in
case it enters bad state, utmost care must be taken to trigger the PDC
wake/sleep routines in the correct order.
The PDC wake sequence can be exercised only after a PDC sleep sequence.
Additionally, GMU firmware should initialize a few registers before the
KMD can trigger a PDC sleep sequence. So PDC sleep can't be done if the
GMU firmware has not initialized. Track these dependencies using a new
status variable and trigger PDC sleep/wake sequences appropriately.
Cc: stable@vger.kernel.org
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673362/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
A7XX_GEN2 generation has additional TCS slots. Poll the respective
DRV status registers before pm suspend.
Fixes: 1f8c29e800 ("drm/msm/a6xx: Add A740 support")
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673361/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Bitfield definition for REG_A6XX_GMU_SPTPRAC_PWR_CLK_STATUS register is
different in A7XX family. Check the correct bits to see if GX is
collapsed on A7XX series.
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673358/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Update GMU register xml with additional definitions for a7x family.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673356/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Descirbe A505 clocks it is using same clocks like A506.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Patchwork: https://patchwork.freedesktop.org/patch/672751/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Use the msm_kms_init_vm() function to allocate memory manager instead of
hand-coding a copy of it. Although MDP4 platforms don't have MDSS
device, it's still safe to use the function as all MDP4 devices have
IOMMU and the parent of the MDP4 is the root SoC device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672563/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
As we've dropped no-IOMMU support, there is no reason to specially
handle the no-IOMMU case inside msm_iommu_new(). Make it return -ENODEV
if there is no IOMMU (instead of returning NULL) and simplify all
calling sites accordingly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672561/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
With the switch to GPUVM the msm driver no longer supports the no-IOMMU
configurations (even without the actual GPU). Return an error in case we
face the lack of the IOMMU.
Fixes: 111fdd2198 ("drm/msm: drm_gpuvm conversion")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672559/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
With the switch to GPUVM the msm driver no longer supports the no-IOMMU
configurations (even without the actual GPU). Return an error in case we
face the lack of the IOMMU for an MDP4 device.
Fixes: 111fdd2198 ("drm/msm: drm_gpuvm conversion")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672557/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add the speedbin mappings for Adreno 623 GPU.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672462/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
On repeated cold boots we occasionally hit a NULL pointer crash in
blk_should_throtl() when throttling is consulted before the throttle
policy is fully enabled for the queue. Checking only q->td != NULL is
insufficient during early initialization, so blkg_to_pd() for the
throttle policy can still return NULL and blkg_to_tg() becomes NULL,
which later gets dereferenced.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000156
...
pc : submit_bio_noacct+0x14c/0x4c8
lr : submit_bio_noacct+0x48/0x4c8
sp : ffff800087f0b690
x29: ffff800087f0b690 x28: 0000000000005f90 x27: ffff00068af393c0
x26: 0000000000080000 x25: 000000000002fbc0 x24: ffff000684ddcc70
x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
x20: 0000000000080000 x19: ffff000684ddcd08 x18: ffffffffffffffff
x17: 0000000000000000 x16: ffff80008132a550 x15: 0000ffff98020fff
x14: 0000000000000000 x13: 1fffe000d11d7021 x12: ffff000688eb810c
x11: ffff00077ec4bb80 x10: ffff000688dcb720 x9 : ffff80008068ef60
x8 : 00000a6fb8a86e85 x7 : 000000000000111e x6 : 0000000000000002
x5 : 0000000000000246 x4 : 0000000000015cff x3 : 0000000000394500
x2 : ffff000682e35e40 x1 : 0000000000364940 x0 : 000000000000001a
Call trace:
submit_bio_noacct+0x14c/0x4c8
verity_map+0x178/0x2c8
__map_bio+0x228/0x250
dm_submit_bio+0x1c4/0x678
__submit_bio+0x170/0x230
submit_bio_noacct_nocheck+0x16c/0x388
submit_bio_noacct+0x16c/0x4c8
submit_bio+0xb4/0x210
f2fs_submit_read_bio+0x4c/0xf0
f2fs_mpage_readpages+0x3b0/0x5f0
f2fs_readahead+0x90/0xe8
Tighten blk_throtl_activated() to also require that the throttle policy
bit is set on the queue:
return q->td != NULL &&
test_bit(blkcg_policy_throtl.plid, q->blkcg_pols);
This prevents blk_should_throtl() from accessing throttle group state
until policy data has been attached to blkgs.
Fixes: a3166c5170 ("blk-throttle: delay initialization until configuration")
Co-developed-by: Liang Jie <liangjie@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Signed-off-by: Han Guangjiang <hanguangjiang@lixiang.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thanks to -Waddress, the compiler warns that the ksft_test_result()
invocations in the arm64 tpidr2 selftest are always true. Oops.
Fix the test by, err, actually running the test functions.
Fixes: 6d80cb7313 ("kselftest/arm64: Convert tpidr2 test to use kselftest.h")
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Fixes for regressions found from refactor around
EPP handling at suspend/resume and minimum frequency
while using the performance governor.
-----BEGIN PGP SIGNATURE-----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=TYFL
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.17-2025-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 6.17 (09/04/25) from Mario Limonciello:
"Fixes for regressions found from refactor around
EPP handling at suspend/resume and minimum frequency
while using the performance governor."
* tag 'amd-pstate-v6.17-2025-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after resume
cpufreq/amd-pstate: Fix setting of CPPC.min_perf in active mode for performance governor
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify io_probe().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A manual application of this patch resulted in a typo for the stub
function __io_uring_cmd_do_in_task(), for the case where CONFIG_IO_URING
isn't true. Fix that up.
Reported-by: Klara Modin <klarasmodin@gmail.com>
Fixes: df3a7762ee ("io_uring/uring_cmd: add io_uring_cmd_tw_t type alias")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use ksft_perror() to report error codes from failing ptrace operations to
make it easier to interpret logs when things go wrong.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
There are many parameters users might want to query about io_uring like
available request types or the ring sizes. This patch introduces an
interface for such slow path queries.
It was written with several requirements in mind:
- Can be used with or without an io_uring instance. Asking for supported
setup flags before creating an instance as well as qeurying info about
an already created ring are valid use cases.
- Should be moderately fast. For example, users might use it to
periodically retrieve ring attributes at runtime. As a consequence,
it should be able to query multiple attributes in a single syscall.
- Backward and forward compatible.
- Should be reasobably easy to use.
- Reduce the kernel code size for introducing new query types.
It's implemented as a new registration opcode IORING_REGISTER_QUERY.
The user passes one or more query strutctures linked together, each
represented by struct io_uring_query_hdr. The header stores common
control fields needed for processing and points to query type specific
information.
The header contains
- The query type
- The result field, which on return contains the error code for the query
- Pointer to the query type specific information
- The size of the query structure. The kernel will only populate up to
the size, which helps with backward compatibility. The kernel can also
reduce the size, so if the current kernel is older than the inteface
the user tries to use, it'll get only the supported bits.
- next_entry field is used to chain multiple queries.
Apart from common registeration syscall failures, it can only immediately
return an error code in case when the headers are incorrect or any
other addresses and invalid. That usually mean that the userspace
doesn't use the API right and should be corrected. All query type
specific errors are returned in the header's result field.
As an example, the patch adds a single query type for now, i.e.
IO_URING_QUERY_OPCODES, which tells what register / request / etc.
opcodes are supported, but there are particular plans to extend it.
Note: there is a request probing interface via IORING_REGISTER_PROBE,
but it's a mess. It requires the user to create a ring first, it only
works for requests, and requires dynamic allocations.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add constants for supported setup / request / feature flags as well as
the feature mask. They'll be used in the next patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move handling of IORING_REGISTER_SEND_MSG_RING into a separate function
in preparation to growing io_uring_register_blind().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When executing modinfo null_blk, there is an error in the description
of module parameter mbps, and the output information of cache_size is
incomplete.The output of modinfo before and after applying this patch
is as follows:
Before:
[...]
parm: cache_size:ulong
[...]
parm: mbps:Cache size in MiB for memory-backed device.
Default: 0 (none) (uint)
[...]
After:
[...]
parm: cache_size:Cache size in MiB for memory-backed device.
Default: 0 (none) (ulong)
[...]
parm: mbps:Limit maximum bandwidth (in MiB/s).
Default: 0 (no limit) (uint)
[...]
Fixes: 058efe000b ("null_blk: add module parameters for 4 options")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the spinlock in blk_mq_find_and_get_req() with an SRCU read lock
around the tag iterators.
This is done by:
- Holding the SRCU read lock in blk_mq_queue_tag_busy_iter(),
blk_mq_tagset_busy_iter(), and blk_mq_hctx_has_requests().
- Removing the now-redundant tags->lock from blk_mq_find_and_get_req().
This change fixes lockup issue in scsi_host_busy() in case of shost->host_blocked.
Also avoids big tags->lock when reading disk sysfs attribute `inflight`.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The freeing of the flush queue/request in blk_mq_exit_hctx() can race with
tag iterators that may still be accessing it. To prevent a potential
use-after-free, the deallocation should be deferred until after a grace
period. With this way, we can replace the big tags->lock in tags iterator
code path with srcu for solving the issue.
This patch introduces an SRCU-based deferred freeing mechanism for the
flush queue.
The changes include:
- Adding a `rcu_head` to `struct blk_flush_queue`.
- Creating a new callback function, `blk_free_flush_queue_callback`,
to handle the actual freeing.
- Replacing the direct call to `blk_free_flush_queue()` in
`blk_mq_exit_hctx()` with `call_srcu()`, using the `tags_srcu`
instance to ensure synchronization with tag iterators.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
