REG_L is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: be97d0db5f ("riscv: VMAP_STACK overflow detection thread-safe")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Link: https://lore.kernel.org/r/20250725165410.2896641-5-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
emit_ld is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: 2ddec2c80b ("riscv, bpf: inline bpf_get_smp_processor_id()")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20250812090256.757273-4-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
emit_ld is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: 19c56d4e5b ("riscv, bpf: add internal-only MOV instruction to resolve per-CPU addrs")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250812090256.757273-3-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The type of the value to write should be determined by the size of the
destination, not by the value itself, which may be a constant. This
aligns the behavior with x86_64, where __typeof__(*(__gu_ptr)) is used
to infer the correct type.
This fixes an issue in put_cmsg, which was only writing 4 out of 8
bytes to the cmsg_len field, causing the glibc tst-socket-timestamp test
to fail.
Fixes: ca1a66cdd6 ("riscv: uaccess: do not do misaligned accesses in get/put_user()")
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250724220853.1969954-1-aurelien@aurel32.net
Signed-off-by: Paul Walmsley <pjw@kernel.org>
REG_L is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: 503638e0ba ("riscv: Stop emitting preventive sfence.vma for new vmalloc mappings")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Link: https://lore.kernel.org/r/20250725165410.2896641-4-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Simplify error handling in OMAP powerdomain, voltage, and VP code by
replacing open-coded '!ptr || IS_ERR(ptr)' checks with the combined
IS_ERR_OR_NULL() helper.
This improves readability and consistency across
omap_set_pwrdm_state(), voltdm_get_voltage(), voltdm_scale(),
voltdm_reset(), and related functions.
No functional change intended.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20250817083449.2249268-1-yangxiuwei2025@163.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Obvious driver patch plus update to sr to add back rotational media
flag since CDROMS are rotational.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaLsNQCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU2SAQCTyMtS
9Nryoq5XAzzWc+exbXrhmCQmx7vovM+G0VXRWwD/eyj76Y4OTioBbCpSOpkiTmu8
O2MxuKmUIyjbNm/gSBE=
=rEsa
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Obvious driver patch plus update to sr to add back rotational media
flag since CDROMS are rotational"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sr: Reinstate rotational media flag
scsi: lpfc: Fix buffer free/clear order in deferred receive path
Fixes the following dtschema check warning:
serial@0 (ti,am3352-uart): compatible: 'oneOf' conditional failed, one must be fixed:
['ti,am3352-uart', 'ti,omap3-uart'] is too long
'ti,am3352-uart' is not one of ['ti,am64-uart', 'ti,j721e-uart']
'ti,am654-uart' was expected
from schema $id: http://devicetree.org/schemas/serial/8250_omap.yaml#
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250721173741.6369-1-bruno.thomsen@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
There is an issue possible where TI AM33xx SoCs do not boot properly after
a reset if EMU0/EMU1 pins were used as GPIO and have been driving low level
actively prior to reset [1].
"Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before
ICEPick Samples
The state of the EMU[1:0] terminals are latched during reset to determine
ICEPick boot mode. For normal device operation, these terminals must be
pulled up to a valid high logic level ( > VIH min) before ICEPick samples
the state of these terminals, which occurs
[five CLK_M_OSC clock cycles - 10 ns] after the falling edge of WARMRSTn.
Many applications may not require the secondary GPIO function of the
EMU[1:0] terminals. In this case, they would only be connected to pull-up
resistors, which ensures they are always high when ICEPick samples.
However, some applications may need to use these terminals as GPIO where
they could be driven low before reset is asserted. This usage of the
EMU[1:0] terminals may require special attention to ensure the terminals
are allowed to return to a valid high-logic level before ICEPick samples
the state of these terminals.
When any device reset is asserted, the pin mux mode of EMU[1:0] terminals
configured to operate as GPIO (mode 7) will change back to EMU input
(mode 0) on the falling edge of WARMRSTn. This only provides a short period
of time for the terminals to return high if driven low before reset is
asserted...
If the EMU[1:0] terminals are configured to operate as GPIO, the product
should be designed such these terminals can be pulled to a valid high-logic
level within 190 ns after the falling edge of WARMRSTn."
We've noticed this problem with custom am335x hardware in combination with
recently implemented cold reset method
(commit 6521f6a195 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")).
It looks like the problem can affect other HW, for instance AM335x
Chiliboard, because the latter has LEDs on GPIO3_7/GPIO3_8 as well.
One option would be to check if the pins are in GPIO mode and either switch
to output active high, or switch to input and poll until the external
pull-ups have brought the pins to the desired high state. But fighting
with GPIO driver for these pins is probably not the most straight forward
approch in a reboot handler.
Fortunately we can easily control pinmuxing here and rely on the external
pull-ups. TI recommends 4k7 external pull up resistors [2] and even with
quite conservative estimation for pin capacity (1 uF should never happen)
the required delay shall not exceed 5ms.
[1] Link: https://www.ti.com/lit/pdf/sprz360
[2] Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/866346/am3352-emu-1-0-questions
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250717152708.487891-1-alexander.sverdlin@siemens.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Common name for Ethernet controllers is "ethernet", not "eth", also
recommended by Devicetree specification in "Generic Names
Recommendation". Verified lack of impact using dtx_diff.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250717142212.92333-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The prototype of __vdso_gettimeofday() uses this struct. However
gettime.h's own includes do not provide a definition for it.
Add a forward declaration, similar to other used structs.
Fixes: 42874e4eb3 ("arch: vdso: consolidate gettime prototypes")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250815-vdso-sparc64-generic-2-v2-1-b5ff80672347@linutronix.de
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075413.3218357-1-sakari.ailus@linux.intel.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If a GuC id lookup failed, the error message was 'Not engine present',
which is bad in multiple ways - incorrect English and 'engines' are
now called 'exec queues' in this context. So fix it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://lore.kernel.org/r/20250904195752.3846138-3-John.C.Harrison@Intel.com
All the field generation for the CTL defines (used for GuC init data)
were hand-rolled rather than using FIELD_PREP/REG_GENMASK/BIT macros.
Also, there were a bunch of macros defined for verbosity settings that
were never used.
So fix that all up.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250904195752.3846138-2-John.C.Harrison@Intel.com
The largest batch of fixes here is a series of fixes for the Freescale
LPSPI driver which James Clark pulled out of their BSP while looking at
support for the NXP S32G version of the controller. The majority of
this turned out to be bug fixes that affect existing systems with the
actual S32G support being just a small quirk that would be unremarkable
by itself, the whole series has had a good amount of testing and review
and the individual patches are all pretty straightforward by themselves.
We also have a few other driver specific fixes, including a relatively
large but simple one for the Cadence QuadSPI driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmi7LmEACgkQJNaLcl1U
h9AryAf8Df0+9Za/JDEfh1s8Ritm+0vbkrcSUPa0ZLRBVJP+upssBEEMwwLscrRI
hommkOawazLfTisCil+dWwEjxoBQpXyTDs+TUkHNjUX8aYHuKIAWqLelBDTpGl1e
ni3UynzuQ8QRDkQhWKQpV35Oi1DvfeHbux714mONw9bX4YCoZdMfsPv5eWYe2qqh
J/Ukflvg1NrR/lrJDB/iQLzDfHbHiQDUEo5Dj22CqEvRIpQpQvoazTnA5eFyKoVd
dKjSolY4UO8cQijaLBwzQvrvsvcWT/gZpQHjCgoVTwJO23H59ePtGTxpmZDEs1sm
QyVqP/ieQq23jq15eKnhwBK6VpKLyQ==
=/RyU
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The largest batch of fixes here is a series of fixes for the Freescale
LPSPI driver which James Clark pulled out of their BSP while looking
at support for the NXP S32G version of the controller.
The majority of this turned out to be bug fixes that affect existing
systems with the actual S32G support being just a small quirk that
would be unremarkable by itself, the whole series has had a good
amount of testing and review and the individual patches are all pretty
straightforward by themselves.
We also have a few other driver specific fixes, including a relatively
large but simple one for the Cadence QuadSPI driver"
* tag 'spi-fix-v6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qpic-snand: unregister ECC engine on probe error and device remove
spi: cadence-quadspi: Implement refcount to handle unbind during busy
spi: spi-fsl-lpspi: Add compatible for S32G
spi: spi-fsl-lpspi: Parameterize reading num-cs from hardware
spi: spi-fsl-lpspi: Treat prescale_max == 0 as no erratum
spi: spi-fsl-lpspi: Constify devtype datas
dt-bindings: lpspi: Document support for S32G
spi: spi-fsl-lpspi: Clear status register after disabling the module
spi: spi-fsl-lpspi: Reset FIFO and disable module on transfer abort
spi: spi-fsl-lpspi: Set correct chip-select polarity bit
spi: spi-fsl-lpspi: Fix transmissions when using CONT
spi: microchip-core-qspi: stop checking viability of op->max_freq in supports_op callback
- Incorrect __BITS_PER_LONG as 64 when compiling the compat vDSO
- Unreachable PLT for ftrace_caller() in a module's .init.text
following past reworking of the module VA range selection
- Memory leak in the ACPI iort_rmr_alloc_sids() after a failed
krealloc_array()
-----BEGIN PGP SIGNATURE-----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=LUMm
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Incorrect __BITS_PER_LONG as 64 when compiling the compat vDSO
- Unreachable PLT for ftrace_caller() in a module's .init.text
following past reworking of the module VA range selection
- Memory leak in the ACPI iort_rmr_alloc_sids() after a failed
krealloc_array()
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: fix unreachable PLT for ftrace_caller in init_module with CONFIG_DYNAMIC_FTRACE
ACPI/IORT: Fix memory leak in iort_rmr_alloc_sids()
arm64: uapi: Provide correct __BITS_PER_LONG for the compat vDSO
Fix the format of debugfs print in the mqd. Need to
add a colon so parser can parse it properly.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add more information in the debugfs which is needed to dump
a pagetable correctly for userqueues where vmid is not known
in the kernel.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct valid_bits and ms_chk_bits of section info field for bad page
threshold exceed CPER to match OOB's behavior.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When creating p2p links, KFD needs to check XGMI link
with two conditions, hive_id and is_sharing_enabled,
but it is missing to check is_sharing_enabled, so add
it to fix the error.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the 'ret' variable in ci_populate_all_graphic_levels()
and ci_populate_all_memory_levels() from u32 to int, as it needs to store
either negative error codes or zero returned by other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the error check from the call to mes_v12_inv_tlb_convert_hub_id
is always false because a uint32_t struct field hub_id is being used to
to perform the less than zero error check. Fix this by using the int
variable ret to perform the check.
Fixes: 87e6505261 ("drm/amd/amdgpu : Use the MES INV_TLBS API for tlb invalidation on gfx12")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If CONFIG_ACPI_PROCESSOR_IDLE=n, acpi_processor_register_idle_driver()
and acpi_processor_unregister_idle_driver() are never used and the
empty stubs of them are not needed. Moreover, they cause the compiler
to complain [1], so remove them.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508300519.tZQHY6HA-lkp@intel.com/ [1]
Fixes: 7a8c994cbb ("ACPI: processor: idle: Optimize ACPI idle driver registration")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20250905081900.663869-2-lihuisong@huawei.com
[ rjw: Changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the case user trigger tags grow by queue sysfs attribute nr_requests,
hctx->sched_tags will be freed directly and replaced with a new
allocated tags, see blk_mq_tag_update_depth().
The problem is that hctx->sched_tags is from elevator->et->tags, while
et->tags is still the freed tags, hence later elevator exit will try to
free the tags again, causing kernel panic.
Fix this problem by replacing et->tags with new allocated tags as well.
Noted there are still some long term problems that will require some
refactor to be fixed thoroughly[1].
[1] https://lore.kernel.org/all/20250815080216.410665-1-yukuai1@huaweicloud.com/
Fixes: f5a6604f7a ("block: fix lockdep warning caused by lock dependency in elv_iosched_store")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20250821060612.1729939-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current depth_updated has some problems:
1) depth_updated() will be called for each hctx, while all elevators
will update async_depth for the disk level, this is not related to hctx;
2) In blk_mq_update_nr_requests(), if previous hctx update succeed and
this hctx update failed, q->nr_requests will not be updated, while
async_depth is already updated with new nr_reqeuests in previous
depth_updated();
3) All elevators are using q->nr_requests to calculate async_depth now,
however, q->nr_requests is still the old value when depth_updated() is
called from blk_mq_update_nr_requests();
Those problems are first from error path, then mq-deadline, and recently
for bfq and kyber, fix those problems by:
- pass in request_queue instead of hctx;
- move depth_updated() after q->nr_requests is updated in
blk_mq_update_nr_requests();
- add depth_updated() call inside init_sched() method to initialize
async_depth;
- remove init_hctx() method for mq-deadline and bfq that is useless now;
Fixes: 77f1e0a52d ("bfq: update internal depth state when queue depth changes")
Fixes: 39823b47bb ("block/mq-deadline: Fix the tag reservation code")
Fixes: 42e6c6ce03 ("lib/sbitmap: convert shallow_depth from one word to the whole sbitmap")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250821060612.1729939-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=g/UF
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20250905' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single small audit patch to fix a potential out-of-bounds read
caused by a negative array index when comparing paths"
* tag 'audit-pr-20250905' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix out-of-bounds read in audit_compare_dname_path()
Otherwise if the nfsd filecache code releases the nfsd_file
immediately, it can trigger the BUG_ON(cred == current->cred) in
__put_cred() when it puts the nfsd_file->nf_file->f-cred.
Fixes: b9f5dd57f4 ("nfs/localio: use dedicated workqueues for filesystem read and write")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250807164938.2395136-1-smayhew@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add the ability to dump BPF program instructions directly from veristat.
Previously, inspecting a program required separate bpftool invocations:
one to load and another to dump it, which meant running multiple
commands.
During active development, it's common for developers to use veristat
for testing verification. Integrating instruction dumping into veristat
reduces the need to switch tools and simplifies the workflow.
By making this information more readily accessible, this change aims
to streamline the BPF development cycle and improve usability for
developers.
This implementation leverages bpftool, by running it directly via popen
to avoid any code duplication and keep veristat simple.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250905140835.1416179-1-mykyta.yatsenko5@gmail.com
The intel_pstate driver does not enable HWP mode when CPUID.06H:EAX[10]
is not set, indicating that EPP (Energy Performance Preference) is not
supported by the hardware.
When EPP is unavailable, the system falls back to using EPB (Energy
Performance Bias) if the feature is supported. However, since the
intel_pstate driver will not enable HWP in this scenario, any EPB-related
code becomes unreachable and irrelevant. Remove the EPB handling code
paths simplifying the driver logic and reducing code size.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250904000608.260817-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since strcpy() is deprecated and the last user of it in the thermal
subsystem is thermal_hwmon_lookup_by_type(), replace strcpy() in that
function with strscpy().
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20250903192059.11353-1-osama.abdelkader@gmail.com
[ rjw: Changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Follow cleanup.h recommendations and define and assign a variable
in one statement when __free() is used.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/2251447.irdbgypaU6@rafael.j.wysocki
Follow cleanup.h recommendations and always define and assign variables
in one statement when __free() is used.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/4691667.LvFx2qVVIh@rafael.j.wysocki
Follow cleanup.h recommendations and always define and assign variables
in one statement when __free() is used.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/5934556.DvuYhMxLoT@rafael.j.wysocki
If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them. Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.
If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).
Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.
Fixes: 0d4b54c6fe ("PM / core: Add LEAVE_SUSPENDED driver flag")
Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki
Change the return type of the speedstep_get_freqs() function from unsigned
int to int because it may return negative error codes. For the same
reason, change the 'ret' variables to int type as well.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250902114545.651661-4-rongqianfeng@vivo.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change the 'ret' variable in store_scaling_setspeed() from unsigned int to
int, as it needs to store either negative error codes or zero returned
by kstrtouint().
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250902114545.651661-2-rongqianfeng@vivo.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ahead of the 2025 LTS kernel, disable by default the two features that
we promised to turn off in September 2025: V4 filesystems, and the
long-broken ASCII case insensitive directories.
Since online fsck has not had any major issues in the 16 months since it
was merged upstream, let's also turn that on by default.
With a bit of luck, this should all go splendidly.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCaLsHjgAKCRBKO3ySh0YR
ph/zAQDlcdAuhW/zrAqVgY79Lmtq1qVCMivrKiabSFG7yBintwEAjlzb5k3mwBAW
DUfyFOdpm1Qv/xEmeLLYCVH4VS8yGgk=
=8sPi
-----END PGP SIGNATURE-----
Merge tag 'kconfig-2025-changes_2025-09-05' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.18-merge
xfs: kconfig and feature changes for 2025 LTS [6.18 v2 2/2]
Ahead of the 2025 LTS kernel, disable by default the two features that
we promised to turn off in September 2025: V4 filesystems, and the
long-broken ASCII case insensitive directories.
Since online fsck has not had any major issues in the 16 months since it
was merged upstream, let's also turn that on by default.
With a bit of luck, this should all go splendidly.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
A few months ago, the multi-fsblock untorn writes patchset added a bunch
of log intent item helper functions to estimate the number of intent
items that could be added to a particular transaction. Those helpers
enabled us to compute a safe upper bound on the number of blocks that
could be written in an untorn fashion with filesystem-provided out of
place writes.
Currently, the online fsck code employs static limits on the number of
intent items that it's willing to accrue to a single transaction when
it's trying to reap what it thinks are the old blocks from a corrupt
structure. There have been no problems reported with this approach
after years of testing, but static limits are scary and gross because
overestimating the intent item limit could result in transaction
overflows and dead filesystems; and underestimating causes unnecessary
overhead.
This series uses the new log intent item size helpers to estimate the
limits dynamically based on worst-case per-block repair work vs. the
size of the scrub transaction. After several months of testing this,
there don't seem to be any problems here either.
v2: rearrange patches, add review tags
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCaLsHjgAKCRBKO3ySh0YR
pvmYAP9kqz/fFRwmU8Stc384u/MA1OewBpohIjjcoGL8W36VLQD8DofFiY/K7yfB
w4KUsJWk//uHFU31iRRKKp8+FCjKtgU=
=03sf
-----END PGP SIGNATURE-----
Merge tag 'fix-scrub-reap-calculations_2025-09-05' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.18-merge
xfs: improve online repair reap calculations [6.18 v2 1/2]
A few months ago, the multi-fsblock untorn writes patchset added a bunch
of log intent item helper functions to estimate the number of intent
items that could be added to a particular transaction. Those helpers
enabled us to compute a safe upper bound on the number of blocks that
could be written in an untorn fashion with filesystem-provided out of
place writes.
Currently, the online fsck code employs static limits on the number of
intent items that it's willing to accrue to a single transaction when
it's trying to reap what it thinks are the old blocks from a corrupt
structure. There have been no problems reported with this approach
after years of testing, but static limits are scary and gross because
overestimating the intent item limit could result in transaction
overflows and dead filesystems; and underestimating causes unnecessary
overhead.
This series uses the new log intent item size helpers to estimate the
limits dynamically based on worst-case per-block repair work vs. the
size of the scrub transaction. After several months of testing this,
there don't seem to be any problems here either.
v2: rearrange patches, add review tags
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Since commit e0b3165ba5 ("cpufreq: add 'freq_table' in struct
cpufreq_policy"), freq_table has been stored in struct cpufreq_policy
instead of being maintained separately.
However, several helpers in freq_table.c still take both policy and
freq_table as parameters, even though policy->freq_table can always be
used. This leads to redundant function arguments and increases the
chance of inconsistencies.
This patch removes the unnecessary freq_table argument from these
functions and updates their callers to only pass policy. This makes
the code simpler, more consistent, and avoids duplication.
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250902073323.48330-1-zhangzihuan@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
