Since there are too many variants available for Foxconn T99W696 modem, and
they all share the same configuration, use PCI_ANY_ID as the subsystem
device ID to match each possible SKUs and support all of them.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
[mani: reworded subject/description and dropped the fixes tag]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250819020013.122162-1-slark_xiao@163.com
Nam Cao <namcao@linutronix.de> says:
Hi,
This v4 is the follow-up to v3 at:
https://lore.kernel.org/linux-fsdevel/20250527090836.1290532-1-namcao@linutronix.de/
which resolves a priority inversion problem.
The v3 patch was merged, but then got reverted due to regression.
The direction of v3 was wrong in the first place. It changed the
eventpoll's event list to be lockless, making the code harder to read. I
stared at the patch again, but still couldn't figure out what the bug is.
The performance numbers were indeed impressive with lockless, but the
numbers are from a benchmark, which is unclear whether it really reflects
real workload.
This v4 takes a completely different approach: it converts the rwlock to
spinlock. Unfortunately, unlike rwlock, spinlock does not allow concurrent
readers. This patch therefore reduces the performance numbers.
I have some optimization tricks to reduce spinlock contention and bring the
numbers back. But Linus appeared and declared that epoll's performance
shouldn't be the priority. So I decided not to post those optimization
patches.
* patches from https://lore.kernel.org/cover.1752581388.git.namcao@linutronix.de:
eventpoll: Replace rwlock with spinlock
Link: https://lore.kernel.org/cover.1752581388.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The ready event list of an epoll object is protected by read-write
semaphore:
- The consumer (waiter) acquires the write lock and takes items.
- the producer (waker) takes the read lock and adds items.
The point of this design is enabling epoll to scale well with large number
of producers, as multiple producers can hold the read lock at the same
time.
Unfortunately, this implementation may cause scheduling priority inversion
problem. Suppose the consumer has higher scheduling priority than the
producer. The consumer needs to acquire the write lock, but may be blocked
by the producer holding the read lock. Since read-write semaphore does not
support priority-boosting for the readers (even with CONFIG_PREEMPT_RT=y),
we have a case of priority inversion: a higher priority consumer is blocked
by a lower priority producer. This problem was reported in [1].
Furthermore, this could also cause stall problem, as described in [2].
Fix this problem by replacing rwlock with spinlock.
This reduces the event bandwidth, as the producers now have to contend with
each other for the spinlock. According to the benchmark from
https://github.com/rouming/test-tools/blob/master/stress-epoll.c:
On 12 x86 CPUs:
Before After Diff
threads events/ms events/ms
8 7162 4956 -31%
16 8733 5383 -38%
32 7968 5572 -30%
64 10652 5739 -46%
128 11236 5931 -47%
On 4 riscv CPUs:
Before After Diff
threads events/ms events/ms
8 2958 2833 -4%
16 3323 3097 -7%
32 3451 3240 -6%
64 3554 3178 -11%
128 3601 3235 -10%
Although the numbers look bad, it should be noted that this benchmark
creates multiple threads who do nothing except constantly generating new
epoll events, thus contention on the spinlock is high. For real workload,
the event rate is likely much lower, and the performance drop is not as
bad.
Using another benchmark (perf bench epoll wait) where spinlock contention
is lower, improvement is even observed on x86:
On 12 x86 CPUs:
Before: Averaged 110279 operations/sec (+- 1.09%), total secs = 8
After: Averaged 114577 operations/sec (+- 2.25%), total secs = 8
On 4 riscv CPUs:
Before: Averaged 175767 operations/sec (+- 0.62%), total secs = 8
After: Averaged 167396 operations/sec (+- 0.23%), total secs = 8
In conclusion, no one is likely to be upset over this change. After all,
spinlock was used originally for years, and the commit which converted to
rwlock didn't mention a real workload, just that the benchmark numbers are
nice.
This patch is not exactly the revert of commit a218cc4914 ("epoll: use
rwlock in order to reduce ep_poll_callback() contention"), because git
revert conflicts in some places which are not obvious on the resolution.
This patch is intended to be backported, therefore go with the obvious
approach:
- Replace rwlock_t with spinlock_t one to one
- Delete list_add_tail_lockless() and chain_epi_lockless(). These were
introduced to allow producers to concurrently add items to the list.
But now that spinlock no longer allows producers to touch the event
list concurrently, these two functions are not necessary anymore.
Fixes: a218cc4914 ("epoll: use rwlock in order to reduce ep_poll_callback() contention")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/ec92458ea357ec503c737ead0f10b2c6e4c37d47.1752581388.git.namcao@linutronix.de
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: stable@vger.kernel.org
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Closes: https://lore.kernel.org/linux-rt-users/20210825132754.GA895675@lothringen/ [1]
Reported-by: Valentin Schneider <vschneid@redhat.com>
Closes: https://lore.kernel.org/linux-rt-users/xhsmhttqvnall.mognet@vschneid.remote.csb/ [2]
Signed-off-by: Christian Brauner <brauner@kernel.org>
The 'bridge' pointer started being assigned and used within this 'if' scope
in commit 0beba3f9d3 ("drm/bridge: connector: add support for HDMI codec
framework").
After that, commit 5d04b41889 ("drm/bridge: split HDMI Audio from
DRM_BRIDGE_OP_HDMI") removed the code dereferencing it from the same 'if'
scope, but did not remove the assignment.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250808-drm-bridge-alloc-getput-for_each_bridge-v2-2-edb6ee81edf1@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver allows reading some regulator settings and adjusting
output voltage. It is based on information from the datasheet
at https://www.nxp.com/docs/en/data-sheet/PF5300.pdf
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Message-ID: <20250902-pf530x-v7-2-10eb2542f944@carnegierobotics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Bindings for the pf530x series of voltage regulators
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20250902-pf530x-v7-1-10eb2542f944@carnegierobotics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When a PCI device is removed with surprise hotplug, there may still be
attempts to attach the device to the default domain as part of tear down
via (__iommu_release_dma_ownership()), or because the removal happens
during probe (__iommu_probe_device()). In both cases zpci_register_ioat()
fails with a cc value indicating that the device handle is invalid. This
is because the device is no longer part of the instance as far as the
hypervisor is concerned.
Currently this leads to an error return and s390_iommu_attach_device()
fails. This triggers the WARN_ON() in __iommu_group_set_domain_nofail()
because attaching to the default domain must never fail.
With the device fenced by the hypervisor no DMAs to or from memory are
possible and the IOMMU translations have no effect. Proceed as if the
registration was successful and let the hotplug event handling clean up
the device.
This is similar to how devices in the error state are handled since
commit 59bbf59679 ("iommu/s390: Make attach succeed even if the device
is in error state") except that for removal the domain will not be
registered later. This approach was also previously discussed at the
link.
Handle both cases, error state and removal, in a helper which checks if
the error needs to be propagated or ignored. Avoid magic number
condition codes by using the pre-existing, but never used, defines for
PCI load/store condition codes and rename them to reflect that they
apply to all PCI instructions.
Cc: stable@vger.kernel.org # v6.2
Link: https://lore.kernel.org/linux-iommu/20240808194155.GD1985367@ziepe.ca/
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Link: https://lore.kernel.org/r/20250904-iommu_succeed_attach_removed-v1-1-e7f333d2f80f@linux.ibm.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
switch_to_super_page() assumes the memory range it's working on is aligned
to the target large page level. Unfortunately, __domain_mapping() doesn't
take this into account when using it, and will pass unaligned ranges
ultimately freeing a PTE range larger than expected.
Take for example a mapping with the following iov_pfn range [0x3fe400,
0x4c0600), which should be backed by the following mappings:
iov_pfn [0x3fe400, 0x3fffff] covered by 2MiB pages
iov_pfn [0x400000, 0x4bffff] covered by 1GiB pages
iov_pfn [0x4c0000, 0x4c05ff] covered by 2MiB pages
Under this circumstance, __domain_mapping() will pass [0x400000, 0x4c05ff]
to switch_to_super_page() at a 1 GiB granularity, which will in turn
free PTEs all the way to iov_pfn 0x4fffff.
Mitigate this by rounding down the iov_pfn range passed to
switch_to_super_page() in __domain_mapping()
to the target large page level.
Additionally add range alignment checks to switch_to_super_page.
Fixes: 9906b9352a ("iommu/vt-d: Avoid duplicate removing in __domain_mapping()")
Signed-off-by: Eugene Koira <eugkoira@amazon.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Saenz Julienne <nsaenz@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20250826143816.38686-1-eugkoira@amazon.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
zpci_get_iommu_ctrs() returns counter information to be reported as part
of device statistics; these counters are stored as part of the s390_domain.
The problem, however, is that the identity domain is not backed by an
s390_domain and so the conversion via to_s390_domain() yields a bad address
that is zero'd initially and read on-demand later via a sysfs read.
These counters aren't necessary for the identity domain; just return NULL
in this case.
This issue was discovered via KASAN with reports that look like:
BUG: KASAN: global-out-of-bounds in zpci_fmb_enable_device
when using the identity domain for a device on s390.
Cc: stable@vger.kernel.org
Fixes: 64af12c6ec ("iommu/s390: implement iommu passthrough via identity domain")
Reported-by: Cam Miller <cam@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Cam Miller <cam@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20250827210828.274527-1-mjrosato@linux.ibm.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Fix a permanent ACPI table memory leak in early_amd_iommu_init() when
CMPXCHG16B feature is not supported
Fixes: 82582f85ed ("iommu/amd: Disable AMD IOMMU if CMPXCHG16B feature is not supported")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20250822024915.673427-1-zhen.ni@easystack.cn
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
It is not necessary to include the header for the struct definition for an
"extern " declaration. It can simply be dropped from the headers to reduce
the number of includes the preprocessor has to process. If needed, it can
be added to the actual C source file.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batadv_skb_crc32() helper was shared between Bridge Loop Avoidance and
Network Coding. With the removal of the network coding feature, it is
possible to just move this helper directly to Bridge Loop Avoidance.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The Network Coding feature, introduced in 2013, is based on the master
thesis "Inter-Flow Network Coding for Wireless Mesh Networks". It relies on
the assumption that neighboring mesh nodes can reliably overhear each
other's transmissions in promiscuous mode, allowing packets to be combined
to reduce forwarding overhead.
This assumption no longer holds for modern wireless mesh networks, which
are heterogeneous and make overhearing increasingly unreliable. Factors
such as multiple spatial streams, varying data rates, beamforming, and
OFDMA all prevent nodes from consistently overhearing each other. The current
implementation in batman-adv is not able to detect these conditions and would
require a more complex layer beyond its neighbor discovery process to do so.
In addition, the feature has been unmaintained for years and is discouraged
for use. None of the current maintainers have the required test
setup to verify its functionality, and known issues remain in its data
structures (reference counting, RCU usage, and cleanup handling). Its
continued presence also blocks necessary refactoring of the core originator
infrastructure.
Remove this obsolete and unmaintained feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Martin Hundebøll <martin@hundeboll.net>
Acked-by: Marek Lindner <marek.lindner@mailbox.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This version will contain all the (major or even only minor) changes for
Linux 6.18.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
RISC-V IO Mapping Table (RIMT) provides the information about the IOMMU
to the OS in ACPI. Add support for ACPI in RISC-V IOMMU drivers by using
RIMT data.
The changes at high level are,
a) Register the IOMMU with RIMT data structures.
b) Enable probing of platform IOMMU in ACPI way using the ACPIID defined
for the RISC-V IOMMU in the BRS spec [1]. Configure the MSI domain if
the platform IOMMU uses MSIs.
[1] - https://github.com/riscv-non-isa/riscv-brs/blob/main/acpi-id.adoc
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250818045807.763922-4-sunilvl@ventanamicro.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
acpi_iommu_configure_id() currently supports only IORT (ARM) and VIOT.
Add support for RISC-V as well.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250818045807.763922-3-sunilvl@ventanamicro.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
RISC-V IO Mapping Table (RIMT) is a static ACPI table to communicate
IOMMU information to the OS. The spec is available at [1].
The changes at high level are,
a) Initialize data structures required for IOMMU/device
configuration using the data from RIMT. Provide APIs required
for device configuration.
b) Provide an API for IOMMU drivers to register the
fwnode with RIMT data structures. This API will create a
fwnode for PCIe IOMMU.
[1] - https://github.com/riscv-non-isa/riscv-acpi-rimt
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250818045807.763922-2-sunilvl@ventanamicro.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Change the 'ret' variable from u32 to int to store negative error codes
or zero;
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly. Additionally, assigning negative error codes to
unsigned type may trigger a GCC warning when the -Wsign-conversion flag
is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250829140219.121783-1-rongqianfeng@vivo.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Introduce a DRM driver for the Mayqueen Pixpaper e-ink display panel,
which is controlled via SPI. The driver supports a 122x250 resolution
display with XRGB8888 format.
Also, add a MAINTAINERS entry for the Pixpaper driver.
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-v5-3-d77c678c4ae3@gmail.com
The binding is for the Mayqueen Pixpaper e-ink display panel,
controlled via an SPI interface.
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-v5-2-d77c678c4ae3@gmail.com
Mayqueen is a Taiwan-based company primarily focused on the development
of arm64 development boards and e-paper displays.
Signed-off-by: Wig Cheng <onlywig@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-v5-1-d77c678c4ae3@gmail.com
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250905073712.3791260-1-nichen@iscas.ac.cn
These registers exist and at least on the t602x variant the IRQ only
clears when theses are cleared.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250826-dart-t8110-stream-error-v1-1-e33395112014@jannau.net
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
After a panic if SNP is enabled in the previous kernel then the kdump
kernel boots with IOMMU SNP enforcement still enabled.
IOMMU command buffers and event buffer registers remain locked and
exclusive to the previous kernel. Attempts to enable command and event
buffers in the kdump kernel will fail, as hardware ignores writes to
the locked MMIO registers as per AMD IOMMU spec Section 2.12.2.1.
Skip enabling command buffers and event buffers for kdump boot as they
are already enabled in the previous kernel.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/576445eb4f168b467b0fc789079b650ca7c5b037.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Since SEV or SNP may already be initialized in the previous kernel,
attempting to initialize them again in the kdump kernel can result
in SNP initialization failures, which in turn lead to IOMMU
initialization failures. Moreover, SNP/SEV guests are not run under a
kdump kernel, so there is no need to initialize SEV or SNP during
kdump boot.
Skip SNP and SEV INIT if doing kdump boot.
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/d884eff5f6180d8b8c6698a6168988118cf9cba1.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
After a panic if SNP is enabled in the previous kernel then the kdump
kernel boots with IOMMU SNP enforcement still enabled.
IOMMU device table register is locked and exclusive to the previous
kernel. Attempts to copy old device table from the previous kernel
fails in kdump kernel as hardware ignores writes to the locked device
table base address register as per AMD IOMMU spec Section 2.12.2.1.
This causes the IOMMU driver (OS) and the hardware to reference
different memory locations. As a result, the IOMMU hardware cannot
process the command which results in repeated "Completion-Wait loop
timed out" errors and a second kernel panic: "Kernel panic - not
syncing: timer doesn't work through Interrupt-remapped IO-APIC".
Reuse device table instead of copying device table in case of kdump
boot and remove all copying device table code.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/3a31036fb2f7323e6b1a1a1921ac777e9f7bdddc.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
After a panic if SNP is enabled in the previous kernel then the kdump
kernel boots with IOMMU SNP enforcement still enabled.
IOMMU completion wait buffers (CWBs), command buffers and event buffer
registers remain locked and exclusive to the previous kernel. Attempts
to allocate and use new buffers in the kdump kernel fail, as hardware
ignores writes to the locked MMIO registers as per AMD IOMMU spec
Section 2.12.2.1.
This results in repeated "Completion-Wait loop timed out" errors and a
second kernel panic: "Kernel panic - not syncing: timer doesn't work
through Interrupt-remapped IO-APIC"
The list of MMIO registers locked and which ignore writes after failed
SNP shutdown are mentioned in the AMD IOMMU specifications below:
Section 2.12.2.1.
https://docs.amd.com/v/u/en-US/48882_3.10_PUB
Reuse the pages of the previous kernel for completion wait buffers,
command buffers, event buffers and memremap them during kdump boot
and essentially work with an already enabled IOMMU configuration and
re-using the previous kernel’s data structures.
Reusing of command buffers and event buffers is now done for kdump boot
irrespective of SNP being enabled during kdump.
Re-use of completion wait buffers is only done when SNP is enabled as
the exclusion base register is used for the completion wait buffer
(CWB) address only when SNP is enabled.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/ff04b381a8fe774b175c23c1a336b28bc1396511.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
In xe_migrate_copy(), when copy_only_ccs is true, we only need two
emit_pte() calls one for the BO and one for the raw CCS storage.
However, the current implementation issues three emit_pte() calls,
resulting in an unnecessary PTE programming job.
This fix removes the redundant emit_pte() call to avoid programming
the same PTEs twice and reducing overhead during CCS-only migration.
v2: Preserve correct behavior on DG2, which requires both CCS and
page copies.
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250904161423.2448727-1-sanjay.kumar.yadav@intel.com
The T8110 variant DART implementation on T602x SoCs indicates an IAS of
42, which requires an extra page table level. The extra level is
optional, but let's implement it.
Later it might be useful to restrict this based on the actual attached
devices, since most won't need that much address space anyway.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250821-apple-dart-4levels-v2-3-e39af79daa37@jannau.net
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
DARTs on t602x SoCs are of the t8110 variant but have an IAS of 42,
which means optional support for an extra page table level.
Refactor the PTE management to support an arbitrary level count, and
then calculate how many levels we need for any given configuration.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250821-apple-dart-4levels-v2-2-e39af79daa37@jannau.net
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The registers are 32-bit and the offsets definitely don't need 64 bits
either, these should've been u32s.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250821-apple-dart-4levels-v2-1-e39af79daa37@jannau.net
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Use the string choice helper function str_plural() to simplify the code.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Ankit Soni <Ankit.Soni@amd.com>
Link: https://lore.kernel.org/r/20250818070556.458271-1-zhao.xichao@vivo.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
skl_crtc_allocate_plane_ddb allow iter.data_rate to be zero
which could cause divide by zero in skl_allocate_plane_ddb,
check against that.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250905104626.1274147-3-juhapekka.heikkila@gmail.com
if __waitfor timeout, ret will have -ETIMEDOUT. Then if condition
was met, and read_ret will have error that's handled.
Then if ret was zero, read_ret was zero ksv_ready must have value.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250905104626.1274147-1-juhapekka.heikkila@gmail.com
Print the memory details even if the detection failed in some way
but we continued the driver initialization anyway. It'll be easier
to debug issues if we at least know what the final results were.
And while at it also print the number of PSF GV points. Previously
we only printed the QGV points.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently the icl codepaths first determine the memory type from the
memory controller registers (via skl_get_dram_info()->skl_get_dram_type())
and then overwrite the results with icl_pcode_read_mem_global_info().
Get rid of the pointless (and potentially incorrect) skl_get_dram_type()
stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use consistent spelling when talking about the 16Gb DIMM w/a.
Even currently language is a bit off as the w/a is actually
about DIMMs with 16Gb DRAM devices on them, not the total capacity
of the whole DIMM. But this language does more or less match how
Bspec talks about this stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We are incorrectly applying the 16Gb DIMM w/a (adding 1 extra
usec to WM0 latency) on MTL+ even though the w/a is only needed
for SKL/ICL.
The current way of setting this is up is a bit of a disaster:
1. always set has_16gb_dimms=true for all platforms except BXT/GLK
2. has_16gb_dimms potentially gets overwritten with something else
* BXT/GLK don't do anything since we never set has_16gb_dimms to
begin with
* skl_get_dram_info() overwrites has_16gb_dimms with the actual
detection results for SKL/ICL/derivatives
* gen12_get_dram_info() (correctly) resets has_16gb_dimms
for TGL/ADL/derivatives
* xelpdp_get_dram_info() doesn't do anything, leaving
has_16gb_dimms incorrectly set for MTL+
Clean up the whole mess by only setting has_16gb_dimms in the
SKL/ICL codepaths where we have the actual detection code for
it. This avois applying the w/a incorrectly on MTL+.
v2: Rewrite commit msg (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Set the MTP TC hotplug bits in the correct register.
Shouldn't matter really as this only gets used for eDP
detection and there should be never eDP on TC ports on
current hw.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902153915.4423-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use correct multi-line kernel-doc style if required.
Some members were described only in the commit message.
Some other members were described using wrong names.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250904144026.7222-1-michal.wajdeczko@intel.com
During system resume the display power state verification will print the
"power well x state mismatch (refcount 0/enabled 1)"
error message from the early resume sequence for a power well left
enabled by BIOS. This power well was probably left enabled by BIOS
inadvertently, since BIOS versions on current platforms do not leave any
display output enabled while resuming from an Sx power state, hence the
enabled display power well is unused. In theory however it is possible
that BIOS leaves a display output enabled, in that case the enabled
power well shouldn't be reported as an error.
According to the above, remove the display power state verification from
the early resume phase to avoid incorrectly reporting an enabled power
well without a power reference as an error.
Note: The refcount for any enabled and used power well (i.e. used for an
enabled display output) will be acquired following the early resume
sequence, after the HW state for display outputs (encoder/crtc etc.) is
read out. Any power well enabled but not used (hence not holding a
reference) will be disabled after the HW state readout. The display
power state will be verified afterwards in intel_power_domains_enable().
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6012
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250903122152.2526050-1-imre.deak@intel.com
