We can't call destroy_workqueue(smb_direct_wq); before stop_sessions()!
Otherwise already existing connections try to use smb_direct_wq as
a NULL pointer.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
VFs without native PCIe Power Management (PM) capabilities inherit their
PF's power state as per PCIe specifications(§5.10.1 PCIe Base Spec 7.0).
Enabling Runtime Power Management (RPM) for these VFs trigger unnecessary
driver suspend/resume operations that ultimately perform no PCI-level power
transition.
Since VFs without PM capabilities cannot independently enter low-power
states, the existing RPM workflow becomes redundant:
1. Driver executes full suspend/resume sequence
2. PCI PM transition step becomes no-op
3. VF power state remains tied to PF's status
Disabling RPM for VFs eliminates this redundant processing while
maintaining proper power management through PF dependency. This
optimization ensures VFs follow their PF's power state without superfluous
runtime handling.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250812163613.9954-1-satyanarayana.k.v.p@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If VGA and DP connected together, there will be only one can get crtc.
Add encoder possible_clones to support two connectors enable.
Fixes: 3c7623fb5b ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-8-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In some case, the dp link training success at 8.1Gbps, but the sink's
maximum supported rate is less than 8.1G. So change the default 8.1Gbps
link rate to the rate that reads from devices' capabilities.
Fixes: 54063d86e0 ("drm/hisilicon/hibmc: add dp link moduel in hibmc drivers")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-6-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When hibmc loaded failed, the driver use hibmc_unload to free the
resource, but the mutexes in mode.config are not init, which will
access an NULL pointer. Just change goto statement to return, because
hibnc_hw_init() doesn't need to free anything.
Fixes: b3df5e65cc ("drm/hibmc: Drop drm_vblank_cleanup")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-5-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The local variable is passed in request_irq (), and there will be use
after free problem, which will make request_irq failed. Using the global
irq name instead of it to fix.
Fixes: b11bc1ae46 ("drm/hisilicon/hibmc: Add MSI irq getting and requesting for HPD")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-4-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Currently the driver missed to clean the i2c adapter when vdac init failed.
It may cause resource leak.
Fixes: a0d078d06e ("drm/hisilicon: Features to support reading resolutions from EDID")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-2-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The clamp macro returns a value within the specified range.
In ad7768_set_freq(), the value returned from clamp() is checked against
zero, which is not possible since the value would always be between
50 and 1024000.
Removed the 'if' check.
This issue was reported by static coverity analyser as logically
dead code.
Signed-off-by: Chandra Mohan Sundar <chandramohan.explore@gmail.com>
Link: https://patch.msgid.link/20250816133757.98624-1-chandramohan.explore@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use min() to reduce code in inv_icm42600_buffer_update_fifo_period()
and inv_icm42600_buffer_update_watermark(), and improve readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250816120510.355835-1-rongqianfeng@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
a fallback during cpuid helpers reorg
- Initialize reserved fields in the SVSM page validation calls structure
to zero in order to allow for future structure extensions
- Have the sev-guest driver's buffers used in encryption operations be
in linear mapping space as the encryption operation can be offloaded
to an accelerator
- Have a read-only MSR write when in an AMD SNP guest trap to the
hypervisor as it is usually done. This makes the guest user experience
better by simply raising a #GP instead of terminating said guest
- Do not output AVX512 elapsed time for kernel threads because the data
is wrong and fix a NULL pointer dereferencing in the process
- Adjust the SRSO mitigation selection to the new attack vectors
-----BEGIN PGP SIGNATURE-----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=zsPJ
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove a transitional asm/cpuid.h header which was added only as a
fallback during cpuid helpers reorg
- Initialize reserved fields in the SVSM page validation calls
structure to zero in order to allow for future structure extensions
- Have the sev-guest driver's buffers used in encryption operations be
in linear mapping space as the encryption operation can be offloaded
to an accelerator
- Have a read-only MSR write when in an AMD SNP guest trap to the
hypervisor as it is usually done. This makes the guest user
experience better by simply raising a #GP instead of terminating said
guest
- Do not output AVX512 elapsed time for kernel threads because the data
is wrong and fix a NULL pointer dereferencing in the process
- Adjust the SRSO mitigation selection to the new attack vectors
* tag 'x86_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpuid: Remove transitional <asm/cpuid.h> header
x86/sev: Ensure SVSM reserved fields in a page validation entry are initialized to zero
virt: sev-guest: Satisfy linear mapping requirement in get_derived_key()
x86/sev: Improve handling of writes to intercepted TSC MSRs
x86/fpu: Fix NULL dereference in avx512_status()
x86/bugs: Select best SRSO mitigation
type of task so that they don't trigger falsely
- Use the write unsafe user access pairs when writing a futex value to prevent
an error on PowerPC which does user read and write accesses differently
-----BEGIN PGP SIGNATURE-----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=q1tX
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Make sure sanity checks down in the mutex lock path happen on the
correct type of task so that they don't trigger falsely
- Use the write unsafe user access pairs when writing a futex value to
prevent an error on PowerPC which does user read and write accesses
differently
* tag 'locking_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Fix __clear_task_blocked_on() warning from __ww_mutex_wound() path
futex: Use user_write_access_begin/_end() in futex_put_value()
The software_node_register_node_group() and
software_node_unregister_node_group() functions take in essence an
array of pointers to software_node structs. Since the functions do not
modify the array declare the argument as constant, so that static
arrays can be declared as const and annotated as __initconst.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/2zny5grbgtwbplynxffxg6dkgjgqf45aigwmgxio5stesdr3wi@gf2zamk5amic
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The minimum supported version of LLVM for building the x86 kernel
was bumped to 15.0.0 in
7861640aac ("x86/build: Raise the minimum LLVM version to 15.0.0"),
so the checks for Clang 14.0.0 and ld.lld 14.0.0 or newer will always been
true. Clean them up.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250814-x86-min-ver-cleanups-v1-6-ff7f19457523@kernel.org
After hvc_write completes, call hvc_kick also in the case the output
buffer has been drained, to ensure tty_wakeup gets called.
This fixes that functions which wait for a drained buffer got stuck
occasionally.
Cc: stable <stable@kernel.org>
Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1230062
Signed-off-by: Fabian Vogt <fvogt@suse.de>
Link: https://lore.kernel.org/r/2011735.PYKUYFuaPT@fvogt-thinkpad
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having the new tty_port_tty guard, use it in tty3270_resize(). This
makes the code easier to read. The winsize is now defined in the
scope and initialized immediately, so that it's obvious.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250814072456.182853-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the vt code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
A local free_page_ptr __free guard is introduced for
__get_free_page/free_page (with proper casts). This could be made public
in include/. But I am not sure if there are more possible users, so
keeping completely private here.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the 8250_rsa code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
The new __free()-annotated declarations are moved to the allocation points
as is preferred:
https://lore.kernel.org/all/CAHk-=wjvh_LUpa=864joG2JJXs3+viO-kLzLidR2JLyMr4MNwA@mail.gmail.com/
Except font_data in con_font_get(). The scope in there would not match
the expected lifetime. But the declaration is moved closer.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-15-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the 8250_rsa code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the 8250_omap code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
For this to work, UART_CAP_RPM has to be set to up->capabilities a bit
earlier.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To use guard()s easily in omap_8250_set_termios(), split it into atomic
and non-atomic part. The former can be easily guarded -- without a need
of indenting or moving code.
omap_8250_set_termios() would likely profit from a cleanup similar to
one in serial8250_do_set_termios() in commit cdc4a3e0b2 ("serial:
8250: extract serial8250_set_fcr()") and earlier.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-12-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the 8250 code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
serial_unlink_irq_chain() is done separately here because with the
guard() used, those BUG_ON()s can be switched WARN_ON()s as we can
actually handle the conditions and return (despite something went really
wrong).
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-11-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the 8250 code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the serial_core code. This
improves readability, makes error handling easier, and marks locked
portions of code explicit.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the mxser code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use scoped_guard() and reorder the function. This is done separately
from the other changes, as it is slighly more intrusive: scoped_guard()
handles the have-tty case and returns. The non-tty case is done at the
end of the function.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the tty_port code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having this, guards like these work:
guard(serial8250_rpm)(up);
or
scoped_guard(serial8250_rpm, up) {
...
}
See e.g. "serial: 8250: use guard()s" later in this series.
And make them available to anyone (EXPORT + put in 8250.h) as drivers
open code this anyway.
The _tx ones are not defined as they would have no user.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having this, guards like these work:
guard(uart_port_lock_irq)(&up->port);
or
scoped_guard(uart_port_lock_irqsave, port) {
...
}
See e.g. "serial: 8250: use guard()s" later in this series.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having this, guards like these work:
scoped_guard(tty_port_tty, port)
tty_wakeup(scoped_tty());
See e.g. "tty_port: use scoped_guard()" later in this series.
The definitions depend on CONFIG_TTY. It's due to tty_kref_put().
On !CONFIG_TTY, it is an inline and its declaration would conflict. The
guards are not needed in that case, of course.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having this, guards like these work:
guard(console_lock)();
or
scoped_guard(console_lock) {
...
}
See e.g. "vc_screen: use guard()s" later in this series.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The text was presenting the team, the the e-mail address, then some of
the expectations, then what form of e-mail is expected. By switching
the e-mail paragraph two paragraphs later and dropping the "Contact"
sub-section, we can have a more natural flow that presents the team,
then its expectation, then how to best contribute, then where to send.
And more importantly, it increases the chances that reporters have read
the prerequisites before finding the e-mail address.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250814192730.19252-2-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some bug reports sent to the security team sometimes lack any explanation,
are only AI-generated without verification, or sometimes it can simply be
difficult to have a conversation with an invisible reporter belonging to
an opaque team. This fortunately remains rare but the trend has been
steadily increasing over the last years and it seems important to clarify
what developers expect from reporters to avoid frustration on any side and
keep the process efficient.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250814192730.19252-1-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mount options (uid, gid, mode) are silently ignored when debugfs is
mounted. This is a regression introduced during the conversion to the
new mount API.
When the mount API conversion was done, the parsed options were never
applied to the superblock when it was reused. As a result, the mount
options were ignored when debugfs was mounted.
Fix this by following the same pattern as the tracefs fix in commit
e4d32142d1 ("tracing: Fix tracefs mount options"). Call
debugfs_reconfigure() in debugfs_get_tree() to apply the mount options
to the superblock after it has been created or reused.
As an example, with the bug the "mode" mount option is ignored:
$ mount -o mode=0666 -t debugfs debugfs /tmp/debugfs_test
$ mount | grep debugfs_test
debugfs on /tmp/debugfs_test type debugfs (rw,relatime)
$ ls -ld /tmp/debugfs_test
drwx------ 25 root root 0 Aug 4 14:16 /tmp/debugfs_test
With the fix applied, it works as expected:
$ mount -o mode=0666 -t debugfs debugfs /tmp/debugfs_test
$ mount | grep debugfs_test
debugfs on /tmp/debugfs_test type debugfs (rw,relatime,mode=666)
$ ls -ld /tmp/debugfs_test
drw-rw-rw- 37 root root 0 Aug 2 17:28 /tmp/debugfs_test
Fixes: a20971c187 ("vfs: Convert debugfs to use the new mount API")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220406
Cc: stable <stable@kernel.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/r/20250816-debugfs-mount-opts-v3-1-d271dad57b5b@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fix is already present in f_ecm.c and was never
propagated to f_ncm.c
When creating multiple NCM ethernet devices
on a composite usb gadget device
each MAC address on the HOST side will be identical.
Having the same MAC on different network interfaces is bad.
This fix updates the MAC address inside the
ncm_strings_defs global during the ncm_bind call.
This ensures each device has a unique MAC.
In f_ecm.c ecm_string_defs is updated in the same way.
The defunct MAC assignment in ncm_alloc has been removed.
Signed-off-by: raub camaioni <raubcameo@gmail.com>
Link: https://lore.kernel.org/r/20250815131358.1047525-1-raubcameo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pm_runtime_resume_and_get() always returns a negative error code or zero;
there's no need to check for positive values such as returned by
pm_runtime_get_sync(). Simply drop the check.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250815113121.925641-1-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for UCSI READ_POWER_LEVEL command as per
UCSI specification v2.1 and above to debugfs.
Following power related fields will be exposed as files in debugfs:-
peak_current (Peak current),
avg_current (Average current) and
vbus_voltage (VBUS voltage)
These files will be updated either when a READ_POWER_LEVEL
command is sent from OS or when a device is connected.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Venkat Jayaraman <venkat.jayaraman@intel.com>
Link: https://lore.kernel.org/r/20250814163028.18058-1-venkat.jayaraman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Presently in `max_contaminant_is_contaminant()` if there's no
contaminant detected previously, CC is open & stopped toggling and no
contaminant is currently present, TCPC.RC would be programmed to do DRP
toggling. However, it didn't actively look for a connection. This would
lead to Type-C not detect *any* new connections. Hence, in the above
situation, re-enable toggling & program TCPC to look for a new
connection.
Also, return early if TCPC was looking for connection as this indicates
TCPC has neither detected a potential connection nor a change in
contaminant state.
In addition, once dry detection is complete (port is dry), restart
toggling.
Fixes: 02b332a063 ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-2-6c8d6c3adafb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Low power mode is enabled when reading CC resistance as part of
`max_contaminant_read_resistance_kohm()` and left in that state.
However, it's supposed to work with 1uA current source. To read CC
comparator values current source is changed to 80uA. This causes a storm
of CC interrupts as it (falsely) detects a potential contaminant. To
prevent this, disable low power mode current sourcing before reading
comparator values.
Fixes: 02b332a063 ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Rule: add
Link: https://lore.kernel.org/stable/20250814-fix-upstream-contaminant-v1-1-801ce8089031%40google.com
Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-1-6c8d6c3adafb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit addresses a rarely observed endpoint command timeout
which causes kernel panic due to warn when 'panic_on_warn' is enabled
and unnecessary call trace prints when 'panic_on_warn' is disabled.
It is seen during fast software-controlled connect/disconnect testcases.
The following is one such endpoint command timeout that we observed:
1. Connect
=======
->dwc3_thread_interrupt
->dwc3_ep0_interrupt
->configfs_composite_setup
->composite_setup
->usb_ep_queue
->dwc3_gadget_ep0_queue
->__dwc3_gadget_ep0_queue
->__dwc3_ep0_do_control_data
->dwc3_send_gadget_ep_cmd
2. Disconnect
==========
->dwc3_thread_interrupt
->dwc3_gadget_disconnect_interrupt
->dwc3_ep0_reset_state
->dwc3_ep0_end_control_data
->dwc3_send_gadget_ep_cmd
In the issue scenario, in Exynos platforms, we observed that control
transfers for the previous connect have not yet been completed and end
transfer command sent as a part of the disconnect sequence and
processing of USB_ENDPOINT_HALT feature request from the host timeout.
This maybe an expected scenario since the controller is processing EP
commands sent as a part of the previous connect. It maybe better to
remove WARN_ON in all places where device endpoint commands are sent to
avoid unnecessary kernel panic due to warn.
Cc: stable <stable@kernel.org>
Co-developed-by: Akash M <akash.m5@samsung.com>
Signed-off-by: Akash M <akash.m5@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250808125315.1607-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many Realtek USB Wi-Fi dongles released in recent years have two modes:
one is driver CD mode which has Windows driver onboard, another one is
Wi-Fi mode. Add the US_FL_IGNORE_DEVICE quirk for these multi-mode devices.
Otherwise, usb_modeswitch may fail to switch them to Wi-Fi mode.
Currently there are only two USB IDs known to be used by these multi-mode
Wi-Fi dongles: 0bda:1a2b and 0bda:a192.
Information about Mercury MW310UH in /sys/kernel/debug/usb/devices.
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=a192 Rev= 2.00
S: Manufacturer=Realtek
S: Product=DISK
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Information about D-Link AX9U rev. A1 in /sys/kernel/debug/usb/devices.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 55 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=1a2b Rev= 0.00
S: Manufacturer=Realtek
S: Product=DISK
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable <stable@kernel.org>
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250813162415.2630-1-zenmchen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clock_nanosleep() returns a positive error value. Unlike other libc
functions it *does not* return -1 nor set errno.
Fix the return value and also adapt nanosleep().
Fixes: 7c02bc4088 ("tools/nolibc: add support for clock_nanosleep() and nanosleep()")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250731-nolibc-clock_nanosleep-ret-v1-1-9e4af7855e61@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This has been supported in GCC for forever and clang gained support for it as
an alias of '-mno-x87' in LLVM 14. Now that x86 requires LLVM 15 or newer
since
7861640aac ("x86/build: Raise the minimum LLVM version to 15.0.0"),
this flag can be unconditionally added, saving a compiler invocation.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: a9fba2be35
Link: https://lore.kernel.org/20250814-x86-min-ver-cleanups-v1-4-ff7f19457523@kernel.org
Commit fde578c862 ("rust: alloc: replace aligned_size() with
Kmalloc::aligned_layout()") provides a public `aligned_layout` function
in `Kamlloc`, but not in `Cmalloc`, and thus uses of it will trigger an
error in `rusttest`.
Such a user appeared in the following commit 22ab0641b9 ("rust: drm:
ensure kmalloc() compatible Layout"):
error[E0599]: no function or associated item named `aligned_layout` found for struct `alloc::allocator_test::Cmalloc` in the current scope
--> rust/kernel/drm/device.rs💯31
|
100 | let layout = Kmalloc::aligned_layout(Layout:🆕:<Self>());
| ^^^^^^^^^^^^^^ function or associated item not found in `Cmalloc`
|
::: rust/kernel/alloc/allocator_test.rs:19:1
|
19 | pub struct Cmalloc;
| ------------------ function or associated item `aligned_layout` not found for this struct
Thus add an equivalent one for `Cmalloc`.
Fixes: fde578c862 ("rust: alloc: replace aligned_size() with Kmalloc::aligned_layout()")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250816204215.2719559-1-ojeda@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Toolchain and infrastructure:
- Workaround 'rustdoc' target modifiers bug in Rust >= 1.88.0. It will
be fixed in Rust 1.90.0 (expected 2025-09-18).
- Clean 'rustdoc' output before running it to avoid confusing the tool
when files from previous versions remain.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmig+UEACgkQGXyLc2ht
IW1s4RAAzT1MCd+CMXfPFyVQnsyXblCa5I3UWhE0+T2nPlicdQqD8NmmkvsxyGLB
SpoZnYk1yDl9L0wxx7Bw/elGeaoIf/EDqsF2Jl7jg9czhWuQhUTsnHemhw93gaOW
uCpCUduiTRlZH3Zp2jCQ7rglXdbAzWTPhyCOTJ5oxn3XTj9GL5iFE8iCea2/vjgV
sYf9GMkwy6I1+HmLsf7rhKVtrt+vozI8PVTXiPX1OlYpRBH0VjmRwjHIDJiGL1qU
FO0AZzNJqZ8yctheCvTJLxezf2SWXxgMaRuEPY7dEXNvyf7LcmXcxvnAnuQbbh0v
7wWTRd427bcKLG4NQ6Mqs1bB53YrgC/qfnSgczAtmULXTYoKHq26Ei6bUG2RnBr6
Br534xF1o1k71Fi5vebtbaGRoLAQFVSB1eTU+iaSZy01YZAevqP4+Ot2Y4NntJtP
CYnU9cUMZiWIOa42RnBI0YHOtdW7QeNSKKIAH2eT1GTB2bbqUtWuioN67jbHG3uq
kt3q7Mu8BwLoH6x6/vkPVW9KKahK5LMlB/uOspZhoaEHeGLO7JluoRwc0+EWV8Zm
QOaCB+lQC1gsEJTmNt0SaexYc7T2ml7zh8uXf+7jXOPzJ1UGUtCXq74un5kkYSOG
CKMmDKAhZa76BwSiFhlrYKlKBxhnYatyzQKXxe6u7caKoJAixfc=
=uT2O
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Workaround 'rustdoc' target modifiers bug in Rust >= 1.88.0. It will
be fixed in Rust 1.90.0 (expected 2025-09-18).
- Clean 'rustdoc' output before running it to avoid confusing the tool
when files from previous versions remain.
* tag 'rust-fixes-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: clean output before running `rustdoc`
rust: workaround `rustdoc` target modifiers bug
The minimum supported version of GCC to build the x86 kernel was bumped
to GCC 8.1 in
a3e8fe814a ("x86/build: Raise the minimum GCC version to 8.1").
Prior to GCC 7.1, '-mpreferred-stack-boundary=3' was not allowed with
'-msse', so areas of the kernel that needed floating point had a
different alignment. Now that GCC > 7.1 is mandatory, there is no need
to have a different value of '-mpreferred-stack-boundary' from the rest
of the kernel, so remove this handling from CC_FLAGS_FPU.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=34fac449e121be97dd073c5428cc855367b2872c
Link: https://lore.kernel.org/20250814-x86-min-ver-cleanups-v1-3-ff7f19457523@kernel.org
strcpy() is deprecated; use strscpy() and memcpy() instead.
In param_set_copystring(), we can safely use memcpy() because we already
know the length of the source string 'val' and that it is guaranteed to
be NUL-terminated within the first 'kps->maxlen' bytes.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20250813132200.184064-2-thorsten.blum@linux.dev
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
This new function allows for runtime checks on the provided source buffer
being of sufficient size to accommodate the enabled channel data layout and
the naturally aligned s64 timestamp (which is non obvious and a frequent
source of bugs in the past).
This patch includes the remaining simple cases for light sensor drivers.
Cc: Mudit Sharma <muditsharma.info@gmail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250802164436.515988-17-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
