When a BPF program which is being loaded reaches the map limit
(MAX_USED_MAPS) or the BTF limit (MAX_USED_BTFS) the -E2BIG is
returned. However, in the former case there is an accompanying
verifier verbose message, and in the latter case there is not.
Add a verbose message to make the behaviour symmetrical.
Reported-by: Kevin Sheldrake <kevin.sheldrake@isovalent.com>
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250816151554.902995-1-a.s.protopopov@gmail.com
In the pin_config_set function, when handling PIN_CONFIG_BIAS_PULL_DOWN or
PIN_CONFIG_BIAS_PULL_UP, the function calls pcs_pinconf_clear_bias()
which writes the register. However, the subsequent operations continue
using the stale 'data' value from before the register write, effectively
causing the bias clear operation to be overwritten and not take effect.
Fix this by reading the 'data' value from the register after calling
pcs_pinconf_clear_bias().
This bug seems to have existed when this code was first merged in commit
9dddb4df90 ("pinctrl: single: support generic pinconf").
Signed-off-by: Chi Zhang <chizhang@asrmicro.com>
Link: https://lore.kernel.org/20250807062038.13610-1-chizhang@asrmicro.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The debug output for spacemit_pinconf_dbg_show() prints an extra newline
at the end. This is redundant as pinconf_pins_show() in pinconf.c already
adds a newline in its for loop.
Remove the newline to avoid the extra line in the output.
Example current output:
$ cat /sys/kernel/debug/pinctrl/d401e000.pinctrl/pinconf-pins
Pin config settings per pin
Format: pin (name): configs
pin 0 (GPIO_00): , bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)
pin 1 (GPIO_01): slew rate (0x0), bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)
pin 2 (GPIO_02): slew rate (0x0), bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)
...
Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck@hammernet.be>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/20250805150701.129113-1-hendrik.hamerlinck@hammernet.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the 'gpio-line-names' property in the MT8183 pinctrl
binding.
This allows naming the GPIOs, which is already done in several
device trees (e.g. mt8183-kukui-jacuzzi.dtsi, mt8183-kukui-kakadu.dtsi,
mt8183-kukui-krane.dtsi), but was previously generating DT schema
warnings.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250801-mtk-dtb-warnings-v1-7-6ba4e432427b@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Support decoding AMD's XOP prefix encoded instructions.
These instructions are introduced for Bulldozer micro architecture, and not
supported on Intel's processors. But when compiling kernel with
CONFIG_X86_NATIVE_CPU on some AMD processor (e.g. -march=bdver2), these
instructions can be used.
Closes: https://lore.kernel.org/all/871pq06728.fsf@wylie.me.uk/
Reported-by: Alan J. Wylie <alan@wylie.me.uk>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Alan J. Wylie <alan@wylie.me.uk>
Link: https://lore.kernel.org/175386161199.564247.597496379413236944.stgit@devnote2
When a VM is marked as an usuable we disallow new submissions from it,
however submissions that where already scheduled on the ring would still
be re-sent.
Since this can lead to further hangs, avoid emitting the actual IBs.
Fixes: 6a4d287a1a ("drm/msm: Mark VM as unusable on GPU hangs")
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668314/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/667895/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The reset reason value may be "all bits set", e.g. 0xFFFFFFFF. This is a
commonly used error response from hardware. This may occur due to a real
hardware issue or when running in a VM.
The user will see all reset reasons reported in this case.
Check for an error response value and return early to avoid decoding
invalid data.
Also, adjust the data variable type to match the hardware register size.
Fixes: ab81310287 ("x86/CPU/AMD: Print the reason for the last reset")
Reported-by: Libing He <libhe@redhat.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250721181155.3536023-1-yazen.ghannam@amd.com
Since commit 2ca34b5087 ("staging: axis-fifo: Correct handling of
tx_fifo_depth for size validation"), write() operations with packets
larger than 'tx_fifo_depth - 4' words are no longer rejected with -EINVAL.
Fortunately, the packets are not actually getting transmitted to hardware,
otherwise they would be raising a 'Transmit Packet Overrun Error'
interrupt, which requires a reset of the TX circuit to recover from.
Instead, the request times out inside wait_event_interruptible_timeout()
and always returns -EAGAIN, since the wake up condition can never be true
for these packets. But still, they unnecessarily block other tasks from
writing to the FIFO and the EAGAIN return code signals userspace to retry
the write() call, even though it will always fail and time out.
According to the AXI4-Stream FIFO reference manual (PG080), the maximum
valid packet length is 'tx_fifo_depth - 4' words, so attempting to send
larger packets is invalid and should not be happening in the first place:
> The maximum packet that can be transmitted is limited by the size of
> the FIFO, which is (C_TX_FIFO_DEPTH–4)*(data interface width/8) bytes.
Therefore, bring back the old behavior and outright reject packets larger
than 'tx_fifo_depth - 4' with -EINVAL. Add a comment to explain why the
check is necessary. The dev_err() message was removed to avoid cluttering
the dmesg log if an invalid packet is received from userspace.
Fixes: 2ca34b5087 ("staging: axis-fifo: Correct handling of tx_fifo_depth for size validation")
Cc: stable@vger.kernel.org
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250817171350.872105-1-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch corrects two minor spelling issues found in
Documentation/userspace-api/iommufd.rst:
- "primarly" -> "primarily"
- "sharable" -> "shareable"
Found using codespell(1).
Link: https://patch.msgid.link/r/20250815153840.188213-2-alessandro@0x65c.net
Signed-off-by: Alessandro Ratti <alessandro@0x65c.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use kvfree() instead of kfree() to free pages allocated by kvcalloc()
in iommufs_hw_queue_alloc_phys() to fix potential memory corruption.
Ensure the memory is properly freed, as kvcalloc may internally use
vmalloc or kmalloc depending on available memory in the system.
Fixes: 2238ddc2b0 ("iommufd/viommu: Add IOMMUFD_CMD_HW_QUEUE_ALLOC ioctl")
Link: https://patch.msgid.link/r/aJifyVV2PL6WGEs6@bhairav-test.ee.iitb.ac.in
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
LLVM/clang can not build the kernel for all architectures supported by
nolibc. The current setup uses the same compiler to build the kernel as
is used for nolibc-test. This prevents using the full qemu-system tests
for LLVM builds.
Instead always build the kernel with GCC. For the nolibc testsuite the
kernel does not need to be built with LLVM.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250719-nolibc-llvm-system-v1-3-1730216ce171@weissschuh.net
Various targets of the testsuite call back into the toplevel kernel
Makefile. These calls use various parameters and are quite long.
Introduce a common variable to make future changes smaller and the lines
shorter.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250719-nolibc-llvm-system-v1-1-1730216ce171@weissschuh.net
Only one of these variables is used.
$CC is preferred over $CROSS_COMPILE.
Make this clear in the help message.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20250817093905.GA14213@1wt.eu/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
B2120 boards are internal boards which never were commercialised.
Drop them.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
ST's STiH415 and STiH416 platforms have already been removed since
a while. Remove some remaining bits within the mach-sti.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
B2120 boards are internal boards which never were commercialised.
Remove them from bindings.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Stick to the documentation and rename both SATA phy-names properties to
what is expected.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The get_next_cpu() function was only used in one place to find
the next possible CPU, which can be replaced by cpumask_next_wrap().
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250818032344.23229-1-wangfushuai@baidu.com
Clobbering a lot of registers and stack slots helps exposing tail call
counter overwrite bugs in JITs.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-5-iii@linux.ibm.com
The tailcall_bpf2bpf_hierarchy_fentry test hangs on s390. Its call
graph is as follows:
entry()
subprog_tail()
trampoline()
fentry()
the rest of subprog_tail() # via BPF_TRAMP_F_CALL_ORIG
return to entry()
The problem is that the rest of subprog_tail() increments the tail call
counter, but the trampoline discards the incremented value. This
results in an astronomically large number of tail calls.
Fix by making the trampoline write the incremented tail call counter
back.
Fixes: 528eb2cb87 ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-4-iii@linux.ibm.com
The tailcall_bpf2bpf_hierarchy_1 test hangs on s390. Its call graph is
as follows:
entry()
subprog_tail()
bpf_tail_call_static(0) -> entry + tail_call_start
subprog_tail()
bpf_tail_call_static(0) -> entry + tail_call_start
entry() copies its tail call counter to the subprog_tail()'s frame,
which then increments it. However, the incremented result is discarded,
leading to an astronomically large number of tail calls.
Fix by writing the incremented counter back to the entry()'s frame.
Fixes: dd691e847d ("s390/bpf: Implement bpf_jit_supports_subprog_tailcalls()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-3-iii@linux.ibm.com
Only BPF functions make use of the tail call counter; helpers and
kfuncs ignore and most likely also clobber it. Writing it into these
functions' frames is pointless and misleading, so do not do it.
Fixes: dd691e847d ("s390/bpf: Implement bpf_jit_supports_subprog_tailcalls()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-2-iii@linux.ibm.com
__ADDRESSABLE_ASM_STR() is where the necessary stringification happens.
As long as "sym" doesn't contain any odd characters, no quoting is
required for its use with .quad / .long. In fact the quotation gets in
the way with gas 2.25; it's only from 2.26 onwards that quoted symbols
are half-way properly supported.
However, assembly being different from C anyway, drop
__ADDRESSABLE_ASM_STR() and its helper macro altogether. A simple
.global directive will suffice to get the symbol "declared", i.e. into
the symbol table. While there also stop open-coding STATIC_CALL_TRAMP()
and STATIC_CALL_KEY().
Fixes: 0ef8047b73 ("x86/static-call: provide a way to do very early static-call updates")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <609d2c74-de13-4fae-ab1a-1ec44afb948d@suse.com>
Validate that all indirect calls adhere to kCFI rules. Notably doing
nocfi indirect call to a cfi function is broken.
Apparently some Rust 'core' code violates this and explodes when ran
with FineIBT.
All the ANNOTATE_NOCFI_SYM sites are prime targets for attackers.
- runtime EFI is especially henous because it also needs to disable
IBT. Basically calling unknown code without CFI protection at
runtime is a massice security issue.
- Kexec image handover; if you can exploit this, you get to keep it :-)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/20250714103441.496787279@infradead.org
Now that FRED provides C-code entry points for handling IRQs, use the
FRED infrastructure for forwarding IRQs even if FRED is fully
disabled, e.g. isn't supported in hardware. Avoiding the non-FRED
assembly trampolines into the IDT handlers for IRQs eliminates the
associated non-CFI indirect call (KVM performs a CALL by doing a
lookup on the IDT using the IRQ vector).
Keep NMIs on the legacy IDT path, as the FRED NMI entry code relies on
FRED's architectural behavior with respect to NMI blocking, i.e. doesn't
jump through the myriad hoops needed to deal with IRET "unexpectedly"
unmasking NMIs. KVM's NMI path already makes a direct CALL to C-code,
i.e. isn't problematic for CFI. KVM does make a short detour through
assembly code to build the stack frame, but the "FRED entry from KVM"
path does the same.
Force FRED for 64-bit kernels if KVM_INTEL is enabled, as the benefits of
eliminating the IRQ trampoline usage far outwieghts the code overhead for
FRED.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250714103441.381946911@infradead.org
Modify asm_fred_entry_from_kvm() to allow it to be invoked by KVM even
when FRED isn't fully enabled, e.g. when running with
CONFIG_X86_FRED=y on non-FRED hardware. This will allow forcing KVM
to always use the FRED entry points for 64-bit kernels, which in turn
will eliminate a rather gross non-CFI indirect call that KVM uses to
trampoline IRQs by doing IDT lookups.
The point of asm_fred_entry_from_kvm() is to bridge between C
(vmx:handle_external_interrupt_irqoff()) and more C
(__fred_entry_from_kvm()) while changing the calling context to appear
like an interrupt (pt_regs). Making the whole thing bound by C ABI.
All that remains for non-FRED hardware is to restore RSP (to undo the
redzone and alignment). However the trivial change would result in
code like:
push %rbp
mov %rsp, %rbp
sub $REDZONE, %rsp
and $MASK, %rsp
PUSH_AND_CLEAR_REGS
push %rbp
POP_REGS
pop %rbp <-- *objtool fail*
mov %rbp, %rsp
pop %rbp
ret
And this will confuse objtool something wicked -- it gets confused by
the extra pop %rbp, not realizing the push and pop preserve the value.
Rather than trying to each objtool about this, recognise that since
the code is bound by C ABI on both ends and interrupts are not allowed
to change pt_regs (only exceptions are) it is sufficient to PUSH_REGS
in order to create pt_regs, but there is no reason to POP_REGS --
provided the callee-saved registers are preserved.
So avoid clearing callee-saved regs and skip POP_REGS.
[Original patch by Sean; much of this version by Josh; Changelog,
comments and final form by Peterz]
Originally-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/20250714103441.245417052@infradead.org
Install the system vector IRQ handlers for FRED even if FRED isn't fully
enabled in hardware. This will allow KVM to use the FRED IRQ path even
on non-FRED hardware, which in turn will eliminate a non-CFI indirect CALL
(KVM currently invokes the IRQ handler via an IDT lookup on the vector).
[sean: extract from diff, drop stub, write changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250714103441.121251108@infradead.org
Instead of using an indirect call to the hypercall page, use a direct
call instead. This avoids all CFI problems, including the one where
the hypercall page doesn't have IBT on.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/20250714103441.011387946@infradead.org
What used to be a simple few instructions has turned into a giant mess
(for x86_64). Not only does it use static_branch wrong, it mixes it
with dynamic branches for no apparent reason.
Notably it uses static_branch through an out-of-line function call,
which completely defeats the purpose, since instead of a simple
JMP/NOP site, you get a CALL+RET+TEST+Jcc sequence in return, which is
absolutely idiotic.
Add to that a dynamic test of hyperv_paravisor_present, something
which is set once and never changed.
Replace all this idiocy with a single direct function call to the
right hypercall variant.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/20250714103440.897136093@infradead.org
Replace fastops with C based stubs. There are a bunch of problems with
the current fastop infrastructure, most all related to their special
calling convention, which bypasses the normal C-ABI.
There are two immediate problems with this at present:
- it relies on RET preserving EFLAGS; whereas C-ABI does not.
- it circumvents compiler based control-flow-integrity checking
because its all asm magic.
The first is a problem for some mitigations where the
x86_indirect_return_thunk needs to include non-trivial work that
clobbers EFLAGS (eg. the Skylake call depth tracking thing).
The second is a problem because it presents a 'naked' indirect call on
kCFI builds, making it a prime target for control flow hijacking.
Additionally, given that a large chunk of virtual machine performance
relies on absolutely avoiding vmexit these days, this emulation stuff
just isn't that critical for performance anymore.
As such, replace the fastop calls with normal C functions using the
'execute' member.
As noted by Paolo: this code was performance critical for pre-Westmere
(2010) and only when running big real mode code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/20250714103439.773781574@infradead.org
Current test_cc() uses the fastop infrastructure to test flags using
SETcc instructions. However, int3_emulate_jcc() already fully
implements the flags->CC mapping, use that.
Removes a pile of gnarly asm.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/20250714103439.637049932@infradead.org
Use min_t() to reduce the code in fsl_lpspi_setup_transfer() and
improve its readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250815082118.586422-2-rongqianfeng@vivo.com
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge all of Documentation/devicetree/bindings/trigger-source/* as a
single entry.
In the previous merge cycle, there was a merge conflict between the IIO
and SPI trees and we ended up with the current state, but the intention
was to have a single entry for all trigger-source bindings.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250815-spi-offload-trigger-followup-v1-1-8ec5413a8383@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace calls of 'devm_kzalloc(dev, count * sizeof([type]), flags)'
with 'devm_kcalloc(dev, count, sizeof([type]), flags)' in
setup_feedback_loop() for safer memory allocation with built-in
overflow protection.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250817142327.174531-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Word 'component' is commonly used in ASoC when referring to any
component, regardless if it is a platform-type or codec-type component.
Reword all avs_xxx_platform_register() to match the scheme present in
ASoC's core. In case of avs_soc_component_register(), the name is
simplified.
Summary:
- avs_xxx_platform_register() -> avs_register_xxx_component()
- avs_soc_component_register() -> avs_register_component()
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250818104126.526442-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By sharing 'name' directly, tearing down components may lead to
use-after-free errors. Duplicate the name to avoid that.
At the same time, update the order of operations - since commit
cee28113db ("ASoC: dmaengine_pcm: Allow passing component name via
config") the framework does not override component->name if set before
invoking the initializer.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250818104126.526442-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
