Overlayfs plucks the relevant creds from the superblock. Extend the
override_creds cleanup class I added to override_creds_ovl which uses
the ovl_override_creds() function as initialization helper. Add
with_ovl_creds() based on this new class.
Link: https://patch.msgid.link/20251117-work-ovl-cred-guard-v4-1-b31603935724@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Bring in the directory locking changes as they touch overlayfs in a
pretty substantial way and we are about to change the credential
override semantics quite substantially as well.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Bring in the shared branch with the kbuild tree to enable
'-fms-extensions' for 6.19. The overlayfs cred guard work
depends on this.
Signed-off-by: Christian Brauner <brauner@kernel.org>
vgic_lpi_stress sends MAPTI and MAPC commands during guest GIC setup to
map interrupt events to ITT entries and collection IDs to
redistributors, respectively.
We have no guarantee that the ITS will finish handling these mapping
commands before the selftest calls KVM_SIGNAL_MSI to inject LPIs to the
guest. If LPIs are injected before ITS mapping completes, the ITS cannot
properly pass the interrupt on to the redistributor.
Fix by adding a SYNC command to the selftests ITS library, then calling
SYNC after ITS mapping to ensure mapping completes before signal_lpi()
writes to GITS_TRANSLATER.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://msgid.link/20251119135744.68552-2-mdittgen@amazon.de
Signed-off-by: Oliver Upton <oupton@kernel.org>
The selftests GIC library and tests assume that the
GICR_TYPER.Processor_number associated with a given CPU is the same as
the CPU's selftest index.
Since this assumption is not guaranteed by specification, add an assert
in gicv3_cpu_init() that validates this is true.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://msgid.link/20251119135744.68552-1-mdittgen@amazon.de
Signed-off-by: Oliver Upton <oupton@kernel.org>
Physically-allocated KVM structs aren't necessary when in VHE mode as
there's no need to share with the hyp's address space. Of course, there
can still be a performance benefit from physical allocations.
Use kvzalloc() for opportunistic physical allocations.
Acked-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://msgid.link/20251119093822.2513142-3-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
A recent change on the receiving end of vmalloc() started warning about
unsupported GFP flags passed by the caller. Nathan reports that this
warning fires in kvm_arch_alloc_vm(), owing to the fact that KVM is
passing a meaningless __GFP_HIGHMEM.
Do as the warning says and fix the code.
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/kvmarm/20251118224448.GA998046@ax162/
Acked-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://msgid.link/20251119093822.2513142-2-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
The upcoming imh_edac driver for Intel Diamond Rapids servers cannot
use skx_get_hi_lo() in skx_common to retrieve the TOHM (Top of High
Memory) and TOLM (Top of Low Memory) parameters. Instead, it obtains
these parameters within its own EDAC driver. To accommodate this,
prepare skx_set_hi_lo() to allow the driver to notify skx_common of
these parameters.
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-4-qiuxu.zhuo@intel.com
The Intel EDAC library 'skx_common' maintains the Intel server EDAC device
list for {skx, i10nm}_edac drivers, which use skx_get_all_bus_mappings()
to build and retrieve the EDAC device list.
However, the upcoming Intel EDAC driver, imh_edac, for Diamond Rapids
servers is designed for memory controllers that are MMIO-based devices
rather than PCI devices. Consequently, it can't use
skx_get_all_bus_mappings() due to the absence of a PCI bus. To accommodate
this, prepare skx_get_edac_list() to enable the upcoming imh_edac driver
to obtain the EDAC device list from the skx_common library and build the
EDAC device list independently.
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-3-qiuxu.zhuo@intel.com
Memory controllers in the new Intel server CPUs, such as Diamond Rapids,
are presented as MMIO-based devices rather than PCI devices.
Modify skx_register_mci() to be independent of 'pci_dev' and use a generic
'dev' of 'struct device' to prepare for support of such MMIO-based memory
controllers.
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-2-qiuxu.zhuo@intel.com
Create a maintainer entry for the new MPAM Driver. Add myself and
James Morse as maintainers. James created the driver and I have
taken up the later versions of his series.
Cc: James Morse <james.morse@arm.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When features are mismatched between MSC the way features are combined
to the class determines whether resctrl can support this SoC.
Add some tests to illustrate the sort of thing that is expected to
work, and those that must be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The bitmap reset code has been a source of bugs. Add a unit test.
This currently has to be built in, as the rest of the driver is
builtin.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
resctrl expects to reset the bandwidth counters when the filesystem
is mounted.
To allow this, add a helper that clears the saved mbwu state. Instead
of cross calling to each CPU that can access the component MSC to
write to the counter, set a flag that causes it to be zero'd on the
the next read. This is easily done by forcing a configuration update.
Signed-off-by: James Morse <james.morse@arm.com>
Cc: Peter Newman <peternewman@google.com>
Reviewed-by: Fenghua Yu <fenghuay@nvdia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that the larger counter sizes are probed, make use of them.
Callers of mpam_msmon_read() may not know (or care!) about the different
counter sizes. Allow them to specify mpam_feat_msmon_mbwu and have the
driver pick the counter to use.
Only 32bit accesses to the MSC are required to be supported by the
spec, but these registers are 64bits. The lower half may overflow
into the higher half between two 32bit reads. To avoid this, use
a helper that reads the top half multiple times to check for overflow.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
[morse: merged multiple patches from Rohit, added explicit counter selection ]
Signed-off-by: James Morse <james.morse@arm.com>
Cc: Peter Newman <peternewman@google.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
mpam v0.1 and versions above v1.0 support optional long counter for
memory bandwidth monitoring. The MPAMF_MBWUMON_IDR register has fields
indicating support for long counters.
Probe these feature bits.
The mpam_feat_msmon_mbwu feature is used to indicate that bandwidth
monitors are supported, instead of muddling this with which size of
bandwidth monitors, add an explicit 31 bit counter feature.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
[ morse: Added 31bit counter feature to simplify later logic ]
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Use the overflow status bit to track overflow on each bandwidth counter
read and add the counter size to the correction when overflow is detected.
This assumes that only a single overflow has occurred since the last read
of the counter. Overflow interrupts, on hardware that supports them could
be used to remove this limitation.
Cc: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bandwidth counters need to run continuously to correctly reflect the
bandwidth.
Save the counter state when the hardware is reset due to CPU hotplug.
Add struct mbwu_state to track the bandwidth counter. Support for
tracking overflow with the same structure will be added in a
subsequent commit.
Cc: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reading a monitor involves configuring what you want to monitor, and
reading the value. Components made up of multiple MSC may need values
from each MSC. MSCs may take time to configure, returning 'not ready'.
The maximum 'not ready' time should have been provided by firmware.
Add mpam_msmon_read() to hide all this. If (one of) the MSC returns
not ready, then wait the full timeout value before trying again.
CC: Shanker Donthineni <sdonthineni@nvidia.com>
Cc: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
MPAM's MSC support a number of monitors, each of which supports
bandwidth counters, or cache-storage-utilisation counters. To use
a counter, a monitor needs to be configured. Add helpers to allocate
and free CSU or MBWU monitors.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
MPAM supports more features than are going to be exposed to resctrl.
For partid other than 0, the reset values of these controls isn't
known.
Discover the rest of the features so they can be reset to avoid any
side effects when resctrl is in use.
PARTID narrowing allows MSC/RIS to support less configuration space than
is usable. If this feature is found on a class of device we are likely
to use, then reduce the partid_max to make it usable. This allows us
to map a PARTID to itself.
CC: Rohit Mathew <Rohit.Mathew@arm.com>
CC: Zeng Heng <zengheng4@huawei.com>
CC: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When CPUs come online the MSC's original configuration should be restored.
Add struct mpam_config to hold the configuration. For each component, this
has a bitmap of features that have been changed from the reset values. The
mpam_config is also used on RIS reset where all bits are set to ensure all
features are reset.
Once the maximum partid is known, allocate a configuration array for each
component, and reprogram each RIS configuration from this.
CC: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Cc: Fujitsu Fujitsu <Shaopeng Tan tan.shaopeng@fujitsu.com>
Cc: Peter Newman peternewman@google.com
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
