Once all the MSC have been probed, the system wide usable number of
PARTID is known and the configuration arrays can be allocated.
After this point, checking all the MSC have been probed is pointless,
and the cpuhp callbacks should restore the configuration, instead of
just resetting the MSC.
Add a static key to enable this behaviour. This will also allow MPAM
to be disabled in response to an error, and the architecture code to
enable/disable the context switch of the MPAM system registers.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Register and enable error IRQs. All the MPAM error interrupts indicate a
software bug, e.g. out of range partid. If the error interrupt is ever
signalled, attempt to disable MPAM.
Only the irq handler accesses the MPAMF_ESR register, so no locking is
needed. The work to disable MPAM after an error needs to happen at process
context as it takes mutex. It also unregisters the interrupts, meaning
it can't be done from the threaded part of a threaded interrupt.
Instead, mpam_disable() gets scheduled.
Enabling the IRQs in the MSC may involve cross calling to a CPU that
can access the MSC.
Once the IRQ is requested, the mpam_disable() path can be called
asynchronously, which will walk structures sized by max_partid. Ensure
this size is fixed before the interrupt is requested.
CC: Rohit Mathew <rohit.mathew@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Rohit Mathew <rohit.mathew@arm.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
cpuhp callbacks aren't the only time the MSC configuration may need to
be reset. Resctrl has an API call to reset a class.
If an MPAM error interrupt arrives it indicates the driver has
misprogrammed an MSC. The safest thing to do is reset all the MSCs
and disable MPAM.
Add a helper to reset RIS via their class. Call this from mpam_disable(),
which can be scheduled from the error interrupt handler.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Resetting RIS entries from the cpuhp callback is easy as the
callback occurs on the correct CPU. This won't be true for any other
caller that wants to reset or configure an MSC.
Add a helper that schedules the provided function if necessary.
Callers should take the cpuhp lock to prevent the cpuhp callbacks from
changing the MSC state.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When a CPU comes online, it may bring a newly accessible MSC with
it. Only the default partid has its value reset by hardware, and
even then the MSC might not have been reset since its config was
previously dirtied. e.g. Kexec.
Any in-use partid must have its configuration restored, or reset.
In-use partids may be held in caches and evicted later.
MSC are also reset when CPUs are taken offline to cover cases where
firmware doesn't reset the MSC over reboot using UEFI, or kexec
where there is no firmware involvement.
If the configuration for a RIS has not been touched since it was
brought online, it does not need resetting again.
To reset, write the maximum values for all discovered controls.
CC: Rohit Mathew <Rohit.Mathew@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To make a decision about whether to expose an mpam class as
a resctrl resource we need to know its overall supported
features and properties.
Once we've probed all the resources, we can walk the tree
and produce overall values by merging the bitmaps. This
eliminates features that are only supported by some MSC
that make up a component or class.
If bitmap properties are mismatched within a component we
cannot support the mismatched feature.
Care has to be taken as vMSC may hold mismatched RIS.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Expand the probing support with the control and monitor types
we can use with resctrl.
CC: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MSC MON_SEL register needs to be accessed from hardirq for the overflow
interrupt, and when taking an IPI to access these registers on platforms
where MSC are not accessible from every CPU. This makes an irqsave
spinlock the obvious lock to protect these registers. On systems with SCMI
or PCC mailboxes it must be able to sleep, meaning a mutex must be used.
The SCMI or PCC platforms can't support an overflow interrupt, and
can't access the registers from hardirq context.
Clearly these two can't exist for one MSC at the same time.
Add helpers for the MON_SEL locking. For now, use a irqsave spinlock and
only support 'real' MMIO platforms.
In the future this lock will be split in two allowing SCMI/PCC platforms
to take a mutex. Because there are contexts where the SCMI/PCC platforms
can't make an access, mpam_mon_sel_lock() needs to be able to fail. Do
this now, so that all the error handling on these paths is present. This
allows the relevant paths to fail if they are needed on a platform where
this isn't possible, instead of having to make explicit checks of the
interface type.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
CPUs can generate traffic with a range of PARTID and PMG values,
but each MSC may also have its own maximum size for these fields.
Before MPAM can be used, the driver needs to probe each RIS on
each MSC, to find the system-wide smallest value that can be used.
The limits from requestors (e.g. CPUs) also need taking into account.
While doing this, RIS entries that firmware didn't describe are created
under MPAM_CLASS_UNKNOWN.
This adds the low level MSC write accessors.
While we're here, implement the mpam_register_requestor() call
for the arch code to register the CPU limits. Future callers of this
will tell us about the SMMU and ITS.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Because an MSC can only by accessed from the CPUs in its cpu-affinity
set we need to be running on one of those CPUs to probe the MSC
hardware.
Do this work in the cpuhp callback. Probing the hardware will only
happen before MPAM is enabled, walk all the MSCs and probe those we can
reach that haven't already been probed as each CPU's online call is made.
This adds the low-level MSC register read accessors.
Once all MSCs reported by the firmware have been probed from a CPU in
their respective cpu-affinity set, the probe-time cpuhp callbacks are
replaced. The replacement callbacks will ultimately need to handle
save/restore of the runtime MSC state across power transitions, but for
now there is nothing to do in them: so do nothing.
The architecture's context switch code will be enabled by a static-key,
this can be set by mpam_enable(), but must be done from process context,
not a cpuhp callback because both take the cpuhp lock.
Whenever a new MSC has been probed, the mpam_enable() work is scheduled
to test if all the MSCs have been probed. If probing fails, mpam_disable()
is scheduled to unregister the cpuhp callbacks and free memory.
CC: Lecopzer Chen <lecopzerc@nvidia.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Memory Partitioning and Monitoring (MPAM) has memory mapped devices
(MSCs) with an identity/configuration page.
Add the definitions for these registers as offset within the page(s).
Link: https://developer.arm.com/documentation/ihi0099/aa/
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
An MSC is a container of resources, each identified by their RIS index.
Some RIS are described by firmware to provide their position in the system.
Others are discovered when the driver probes the hardware.
To configure a resource it needs to be found by its class, e.g. 'L2'.
There are two kinds of grouping, a class is a set of components, which
are visible to user-space as there are likely to be multiple instances
of the L2 cache. (e.g. one per cluster or package)
Add support for creating and destroying structures to allow a hierarchy
of resources to be created.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Probing MPAM is convoluted. MSCs that are integrated with a CPU may
only be accessible from those CPUs, and they may not be online.
Touching the hardware early is pointless as MPAM can't be used until
the system-wide common values for num_partid and num_pmg have been
discovered.
Start with driver probe/remove and mapping the MSC.
Cc: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add code to parse the arm64 specific MPAM table, looking up the cache
level from the PPTT and feeding the end result into the MPAM driver.
This happens in two stages. Platform devices are created first for the
MSC devices. Once the driver probes it calls acpi_mpam_parse_resources()
to discover the RIS entries the MSC contains.
For now the MPAM hook mpam_ris_create() is stubbed out, but will update
the MPAM driver with optional discovered data about the RIS entries.
CC: Carl Worth <carl@os.amperecomputing.com>
Link: https://developer.arm.com/documentation/den0065/3-0bet/?lang=en
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Define a cleanup helper for use with __free to release the acpi table when
the pointer goes out of scope. Also, introduce the helper
acpi_get_table_pointer() to simplify a commonly used pattern involving
acpi_get_table().
These are first used in a subsequent commit.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Define a cleanup helper for use with __free to destroy platform devices
automatically when the pointer goes out of scope. This is only intended to
be used in error cases and so should be used with return_ptr() or
no_free_ptr() directly to avoid the automatic destruction on success.
A first use of this is introduced in a subsequent commit.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The bulk of the MPAM driver lives outside the arch code because it
largely manages MMIO devices that generate interrupts. The driver
needs a Kconfig symbol to enable it. As MPAM is only found on arm64
platforms, the arm64 tree is the most natural home for the Kconfig
option.
This Kconfig option will later be used by the arch code to enable
or disable the MPAM context-switch code, and to register properties
of CPUs with the MPAM driver.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
CC: Dave Martin <dave.martin@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
MPAM identifies CPUs by the cache_id in the PPTT cache structure.
The driver needs to know which CPUs are associated with the cache.
The CPUs may not all be online, so cacheinfo does not have the
information.
Add a helper to pull this information out of the PPTT.
CC: Rohit Mathew <Rohit.Mathew@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MPAM table identifies caches by id. The MPAM driver also wants to know
the cache level to determine if the platform is of the shape that can be
managed via resctrl. Cacheinfo has this information, but only for CPUs that
are online.
Waiting for all CPUs to come online is a problem for platforms where
CPUs are brought online late by user-space.
Add a helper that walks every possible cache, until it finds the one
identified by cache-id, then return the level.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In actbl2.h, acpi_pptt_cache describes the fields in the original
Cache Type Structure. In PPTT table version 3 a new field was added at the
end, cache_id. This is described in acpi_pptt_cache_v1 but rather than
including all v1 fields it just includes this one.
In lieu of this being fixed in acpica, introduce acpi_pptt_cache_v1_full to
contain all the fields of the Cache Type Structure . Update the existing
code to use this new struct. This simplifies the code and removes a
non-standard use of ACPI_ADD_PTR.
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In acpi_count_levels(), the initial value of *levels passed by the
caller is really an implementation detail of acpi_count_levels(), so it
is unreasonable to expect the callers of this function to know what to
pass in for this parameter. The only sensible initial value is 0,
which is what the only upstream caller (acpi_get_cache_info()) passes.
Use a local variable for the starting cache level in acpi_count_levels(),
and pass the result back to the caller via the function return value.
Get rid of the levels parameter, which has no remaining purpose.
Fix acpi_get_cache_info() to match.
Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ACPI MPAM table uses the UID of a processor container specified in
the PPTT to indicate the subset of CPUs and cache topology that can
access each MPAM System Component (MSC).
This information is not directly useful to the kernel. The equivalent
cpumask is needed instead.
Add a helper to find the processor container by its id, then walk
the possible CPUs to fill a cpumask with the CPUs that have this
processor container as a parent.
CC: Dave Martin <dave.martin@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In commit 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the
new function report_idle_softirq() was created by breaking code out of the
existing can_stop_idle_tick() for kernels v5.18 and newer.
In doing so, the code essentially went from this form:
if (A) {
static int ratelimit;
if (ratelimit < 10 && !C && A&D) {
pr_warn("NOHZ tick-stop error: ...");
ratelimit++;
}
return false;
}
to a new function:
static bool report_idle_softirq(void)
{
static int ratelimit;
if (likely(!A))
return false;
if (ratelimit < 10)
return false;
...
pr_warn("NOHZ tick-stop error: local softirq work is pending, handler #%02x!!!\n",
pending);
ratelimit++;
return true;
}
commit a7e282c777 ("tick/rcu: Fix bogus ratelimit condition") realized
ratelimit was essentially set to zero instead of ten, and hence *no*
softirq pending messages would ever be issued, but "fixed" it as:
- if (ratelimit < 10)
+ if (ratelimit >= 10)
return false;
However, this fix introduced another issue:
When ratelimit is greater than or equal 10, even if A is true, it will
directly return false. While ratelimit in the original code was only used
to control printing and will not affect the return value.
Restore the original logic and restrict ratelimit to control the printk and
not the return value.
Fixes: 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Fixes: a7e282c777 ("tick/rcu: Fix bogus ratelimit condition")
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251119174525.29470-1-wen.yang@linux.dev
Just a couple fixes for the A523 family. A couple clocks are marked as
critical, and the lower bound of the audio PLL was lowered to match
the datasheet.
-----BEGIN PGP SIGNATURE-----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=O3PS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=s72M
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clk-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes
Pull Allwinner clk driver fixes from Chen-Yu Tsai:
Just a couple fixes for the A523 family. A couple clocks are marked as
critical, and the lower bound of the audio PLL was lowered to match
the datasheet.
* tag 'sunxi-clk-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: sun55i-a523-ccu: Lower audio0 pll minimum rate
clk: sunxi-ng: sun55i-a523-r-ccu: Mark bus-r-dma as critical
clk: sunxi-ng: Mark A523 bus-r-cpucfg clock as critical
create_in_format_blob() is either supposed to return a valid
pointer or an error, but never NULL. The caller will dereference
the blob when it is not an error, and thus will oops if NULL
returned. Return proper error values in the failure cases.
Cc: stable@vger.kernel.org
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Fixes: 0d6dcd741c ("drm/plane: modify create_in_formats to acommodate async")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251112233030.24117-2-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
These are mainly devicetree fixes for the arm platforms from Rockchips
NXP, ASpeed and Broadcom, addressing issues with accidental overclocking,
pinctrl, network and dtc warnings.
There are additional fixes for regressions with the i.MX reset and memory
controller drivers as well as the Tegra memory controller driver
Minor updates to the MAINTAINERS file, tee documentation and defconfigs
bring those up to date with recent changes elsewhere.
-----BEGIN PGP SIGNATURE-----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=5SRf
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the arm platforms from Rockchips
NXP, ASpeed and Broadcom, addressing issues with accidental
overclocking, pinctrl, network and dtc warnings.
There are additional fixes for regressions with the i.MX reset and
memory controller drivers as well as the Tegra memory controller
driver.
Minor updates to the MAINTAINERS file, tee documentation and
defconfigs bring those up to date with recent changes elsewhere"
* tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
MAINTAINERS: sync omap devicetree maintainers with omap platform
MAINTAINERS: Update Krzysztof Kozlowski's email
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5
arm64: dts: rockchip: disable HS400 on RK3588 Tiger
arm64: dts: rockchip: drop reset from rk3576 i2c9 node
tee: <uapi/linux/tee.h: fix all kernel-doc issues
arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2
arm64: dts: broadcom: bcm2712: rpi-5: Add ethernet0 alias
arm64: dts: broadcom: Assign clock rates in eth node for RPi5
reset: imx8mp-audiomix: Fix bad mask values
ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY
arm64: defconfig: Fix V3D deferred probe timeout
arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2
arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1
arm64: dts: imx8mp-kontron: Fix USB OTG role switching
arm64: dts: imx95: Fix MSI mapping for PCIe endpoint nodes
arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred
arm: imx_v6_v7_defconfig: enable ext4 directly
memory: tegra210: Fix incorrect client ids
arm64: dts: rockchip: Fix indentation on rk3399 haikou demo dtso
...
Luke Wang found a problem in the pwm-adp5585 driver about how register
information is mapped to the different device variants. This effectively
made the driver non-functional. That didn't pop up before because the
driver change was developped as part of a bigger mfd series and the
original author didn't retest PWM functionality after it was tested in
an earlier revision but then reworked.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmkdoOoACgkQj4D7WH0S
/k632gf/U51WY5gEiIFKf37EGUvsgLdm2ND4FIcaorBwBmux8LATbcx6G9rKTWyK
pFk5+12QMVr9/DGTCkm8n3xGUURrgj7LrHrA+XLDXoLkmsx9RX3bfEfSXgnsKmew
oU0xCetmLAVvS6iISych76ACpRkCZetqrgm3h7gjbtQ0ghdImwuoIlK8hHKYPnSU
p8+A5zl2eSsiPUUyjoAjDYXCaIm/9YQYCsw/T39GmkQ8Pg7TfTVqgtJyh6VWdnPf
svNfejk7H6CC/2457X9zO+QSYEp06MY5Bdqfein+ZXlqC+VWIhiTVj5fLHej7A40
rmSB6oaGNuIRPEyEtdjpESn4/Ap8EA==
=f5ob
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.18-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Correct mismatched pwm chip info for adp5585.
Luke Wang found a problem in the pwm-adp5585 driver about how register
information is mapped to the different device variants. This
effectively made the driver non-functional.
That didn't pop up before because the driver change was developed as
part of a bigger mfd series and the original author didn't retest PWM
functionality after it was tested in an earlier revision but then
reworked"
* tag 'pwm/for-6.18-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: adp5585: Correct mismatched pwm chip info
When the genpd governor for CPUs, tries to select the most optimal idle
state for a group of CPUs managed in a PM domain, it fails far too often.
On a Dragonboard 410c, which is an arm64 based platform with 4 CPUs in one
cluster that is using PSCI OS-initiated mode, we can observe that we often
fail when trying to enter the selected idle state. This is certainly a
suboptimal behaviour that leads to many unnecessary requests being sent to
the PSCI FW.
A simple dd operation that reads from the eMMC, to generate some IRQs and
I/O handling helps us to understand the problem, while also monitoring the
rejected counters in debugfs for the corresponding idle states of the genpd
in question.
Menu governor:
cat /sys/kernel/debug/pm_genpd/power-domain-cluster/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 1451 437 91 149 0
S1 65194 558 149 172 0
dd if=/dev/mmcblk0 of=/dev/null bs=1M count=500
524288000 bytes (500.0MB) copied, 3.562698 seconds, 140.3MB/s
cat /sys/kernel/debug/pm_genpd/power-domain-cluster/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 2694 1073 265 892 1
S1 74567 829 561 790 0
The dd completed in ~3.6 seconds and rejects increased with 586.
Teo governor:
cat /sys/kernel/debug/pm_genpd/power-domain-cluster/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 4976 2096 392 1721 2
S1 160661 1893 1309 1904 0
dd if=/dev/mmcblk0 of=/dev/null bs=1M count=500
524288000 bytes (500.0MB) copied, 3.543225 seconds, 141.1MB/s
cat /sys/kernel/debug/pm_genpd/power-domain-cluster/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 5192 2194 433 1830 2
S1 167677 2891 3184 4729 0
The dd completed in ~3.6 seconds and rejects increased with 1916.
The main reason to the above problem is pending IPIs for one of the CPUs
that is affected by the idle state that the genpd governor selected. This
leads to that the PSCI FW refuses to enter it. To improve the behaviour,
let's start to take into account pending IPIs for CPUs in the genpd
governor, hence we fallback to use the shallower per CPU idle state.
Re-testing with this change shows a significant improved behaviour.
- Menu governor:
cat /sys/kernel/debug/pm_genpd/power-domain-cluster/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 2556 878 19 368 1
S1 69974 596 10 152 0
dd if=/dev/mmcblk0 of=/dev/null bs=1M count=500
524288000 bytes (500.0MB) copied, 3.522010 seconds, 142.0MB/s
cat /sys/kernel/debug/pm_genpd/power-domain-cluster/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 3360 1320 28 819 1
S1 70168 710 11 267 0
The dd completed in ~3.5 seconds and rejects increased with 10.
- Teo governor
cat /sys/kernel/debug/pm_genpd/power-domain-cluster/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 5145 1861 39 938 1
S1 188887 3117 51 1975 0
dd if=/dev/mmcblk0 of=/dev/null bs=1M count=500
524288000 bytes (500.0MB) copied, 3.653100 seconds, 136.9MB/s
cat /sys/kernel/debug/pm_genpd/power-domain-cluster/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 5260 1923 42 1002 1
S1 190849 4033 52 2892 0
The dd completed in ~3.7 seconds and rejects increased with 4.
Note that, the rejected counters in genpd are also being accumulated in the
rejected counters that are managed by cpuidle, yet on a per CPU idle states
basis. Comparing these counters before/after this change, through cpuidle's
sysfs interface shows the similar improvements.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When governors used during cpuidle try to find the most optimal idle state
for a CPU or a group of CPUs, they are known to quite often fail. One
reason for this is, that they are not taking into account whether there has
been an IPI scheduled for any of the CPUs that are affected by the selected
idle state.
To enable pending IPIs to be taken into account for cpuidle decisions,
introduce a new helper function, cpus_peek_for_pending_ipi().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The round_rate() clk ops is deprecated in the clk framework in favor
of the determine_rate() clk ops, so let's convert this driver so that
round_rate() can be removed from the clk core.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Starting with commit f99508074e ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
BCM2712 has a PM block but lacks asb and rpivid_asb register
spaces. To avoid unwanted results add a check for asb existence
during probe and also add a new register offset for bcm2712 to
control grafx_v3d power domain. The decision to use the new
register is implicit - if asb register base is null then the
driver is probed for bcm2712 (the other supported SoCs have
asb register space).
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The mtk-mfg pmdomain driver calls common mailbox framework functions. If
the common mailbox framework is not selected in the kernel's
configuration, the build runs into a linker error, as the symbols are
absent.
The hardware mailbox Kconfig system, MAILBOX, has no dependencies of its
own. It's therefore safe to "select" it rather than use "depend on".
Declare this "select" dependency in the Kconfig for the driver.
Fixes: 1ff1f0db6aec ("pmdomain: mediatek: Add support for MFlexGraphics")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510301311.TcOCnZ1s-lkp@intel.com/
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Various MediaTek SoCs use GPU integration silicon named "MFlexGraphics"
by MediaTek. On the MT8196 and MT6991 SoCs, interacting with this
integration silicon is required to power on the GPU.
This glue silicon is in the form of an embedded microcontroller running
special-purpose firmware, which autonomously adjusts clocks and
regulators.
Implement a driver, modelled as a pmdomain driver with a
set_performance_state operation, to support these SoCs.
The driver also exposes the actual achieved clock rate, as read back
from the MCU, as common clock framework clocks, by acting as a clock
provider as well.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Let's add the missing header to fix the reported build-errors.
Fixes: df4e9ec1ed86 ("pmdomain: mediatek: Add support for secure HWCCF infra power on")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510231317.ZZxNaFG0-lkp@intel.com/
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the HFRPSYS Multimedia power domains found in the
MediaTek MT8196 Chromebook SoC.
Those power domains are all managed by the Hardware Voter MCU.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a new SPM bus protection block and add support for both the
direct control and HW Voter control SCPSYS power domains found
in the MT8196 and MT6991 SoCs.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some SoCs, like the MediaTek Dimensity 9400 (MT6991), have granular
power controls and will disable power to the infracfg to save power
when the platform is in deeper sleep states (or when no IP in the
the infracfg macro-block is in use).
These chips also cannot control the infracfg power states directly
via AP register writes as those are protected by the secure world.
Add a new MTK_SCPD_INFRA_PWR_CTL cap and, if present, make a call
to the secure world to poweron the infracfg block, as the HWV IP
resides in there, when executing HWV domains power sequences.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
New generation SoCs like MT8196/MT6991 feature a new type of power
domains, managed by a Hardware Voter (HWV) helper (through a SoC
internal fixed-function MCU): this is used to collect votes from
both the AP and the various other remote processors present in the
SoC and transparently power on/off various power domains, avoiding
unpowered access of registers in various internal IPs from all of
the integrated remote processors (or from the AP...!).
Add a new power domain type and differentiate between the old
SCPSYS_MTCMOS_TYPE_DIRECT_CTL - where power domains are controlled
directly by and exclusively from the Application Processor, and
the new SCPSYS_MTCMOS_TYPE_HW_VOTER, where the power domains are
voted through the HWV.
With the two needing different handling, check the power domain
type and assign a different power_{off,on} callback for pm_genpd:
for this specific reason, also move the check for the SCPD cap
MTK_SCPD_KEEP_DEFAULT_OFF after the assignment, and use the
assigned power_on function instead of calling scpsys_power_on()
directly to make that work for both HW_VOTER and DIRECT_CTL.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the RPMh power domains present in Kaanapali SoCs. Also increase the
maximum allowed number of levels for ARC resources from 16 to 32, as
needed starting on the Kaanapali SoC where the ARC vote registers have been
expanded from 4 to 5 bits.
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
i.MX95 DWC3 inside HSIOMIX could still wakeup Linux, even if HSIOMIX
power domain(Digital logic) is off. There is still always on logic
have the wakeup capability which is out band wakeup capbility.
So use device_set_out_band_wakeup for i.MX95 to make sure DWC3 could
wakeup system even if HSIOMIX power domain is in off state.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
i.MX95 USB2 inside HSIOMIX could still wakeup Linux, even if HSIOMIX
power domain(Digital logic) is off. There is still always on logic
have the wakeup capability which is out band wakeup capbility.
So use device_set_out_band_wakeup for i.MX95 to make sure usb2 could
wakeup system even if HSIOMIX power domain is in off state.
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When add a platform device by calling ci_hdrc_add_device(), this device
will reuse OF node of its parent device. If power-domains property is
provided in the OF node, both two platform devices will be attached to
the same power domain. This should be unnecessary and may bring other
inconsistent behavior. For example, to support wakeup capability, these
two platform device need different power domain state. The parent device
need NOT power domain on for out-band interrupt, but the ci_hdrc device
need power domain on for in-band interrupt. The i.MX95 Soc support
out-band wakeup interrupt, the user need to enable wakeup for the parent
device, but if the user also enable wakeup for ci_hdrc device, the power
domain will keep at on state finally. To exclude such inconsistent
behavior and simplify the power management, detach power domain for ci_hdrc
platform device.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, if a device is configured as a system wakeup source, the PM
domain core avoids powering off its power domain during system-wide
suspend. However, this can lead to unnecessary power consumption,
especially for devices whose wakeup logic resides in an always-on domain,
i.e., devices with out-of-band wakeup capability.
To address this, add a check for device_out_band_wakeup() in
genpd_finish_suspend(). If the device supports out-of-band wakeup, its
power domain can be safely powered off, just like regular devices without
wakeup enabled. And same check in genpd_finish_resume().
This change improves power efficiency without compromising wakeup
functionality.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some devices can wake up the system from suspend even when their power
domains are turned off. This is possible because their system-wakeup logic
resides in an always-on power domain - indicating that they support
out-of-band system wakeup.
Currently, PM domain core doesn't power off such devices if they are marked
as system wakeup sources. To better represent devices with out-of-band
wakeup capability, this patch introduces a new flag out_band_wakeup in
'struct dev_pm_info'.
Two helper APIs are added:
- device_set_out_band_wakeup() - to mark a device as having out-of-band
wakeup capability.
- device_out_band_wakeup() - to query the flag.
Allow the PM core and drivers to distinguish between regular and
out-of-band wakeup sources, enable more accurate power management decision.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use scsi_device_busy() instead of open-coding it. This patch prepares
for skipping the SCSI device budget map initialization in certain cases.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251113235252.2015185-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.19.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
