Add NAND support. The sama7g5's SMC IP is the same as sama5d2's with
a slightly change: it provides a synchronous clock output (SMC clock)
that is dedicated to FPGA usage. Since this doesn't interfere with the SMC
NAND configuration, thus code will not be added in the current nand driver
to address the FPGA usage, use the sama5d2's compatible and choose not to
introduce dedicated compatibles for sama7g5.
Tested with Micron MT29F4G08ABAEAWP NAND flash.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
[nicolas.ferre@microchip.com: add the definition of PMC_MCK1 in
include/dt-bindings/clock/at91.h from another patch]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220111130556.905978-1-tudor.ambarus@microchip.com
The "atmel,use-dma-rx", "atmel,use-dma-rx" dt properties are not used by
the i2c-at91 driver, nor they are defined in the bindings file, thus remove
them.
Cc: stable@vger.kernel.org
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220302161854.32177-1-tudor.ambarus@microchip.com
This regulator is powering the vddcore pins from MPU.
Its real value on the board and in the MPU datasheet is 1.15V.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220302160235.28336-1-nicolas.ferre@microchip.com
dma-cells property is required for dma-controller. Fixes dtbs_check
warnings like:
dma@c1128000: '#dma-cells' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20220129175514.298942-1-krzysztof.kozlowski@canonical.com
All 3 miniPCIe slots in Turris Omnia are designed for 10 W.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
New platforms: Snapdragon 625 and Snapdragon 632
New boards: Google Herobrine R1, Fairphone FP3, SHIFT6mq, Samsung Galaxy
Book2 and Snapdragon 8 Gen 1 Hardware Development Kit (HDK)
On IPQ6018 the USB reference period is corrected, GICv2m support is
enabled and the max-link-speed for PCIe is specified.
IPQ8074 adds description of GIVv2m and SMEM, and ensures that TrustZone
related memory is reserved from Linux.
On the Snapdragon 7c Gen 3 (SC7280) description of display, displayport,
L3 interconnect, bluetooth, CPU opp-tables are added. Another revision
of the Google Herobrine is introduced and a bunch of cleanups are
introduced.
On Snapdragon 845 new support for the SHIFT6mq device is introduced, the
OnePlus devices gains fuel gauge and the platform gains GSI DMA support,
which is enabled for SPI (for now).
On the Snapdragon 850 based WindowsOnSnapdragon laptops, initial support
for Samsugn Galaxy Book2 is introduced and the Lenovo Yoga C630 gains
description of its backlight controls.
The Snapdragon 625 platform (MSM8953) the thereof derrived Snapdragon
632 platform is introduced, with initial description of the Fairphone 3.
Fairphone 4 on the SM7225 platform gains proper WLED configuration.
On Snapdragon 855 (SM8150) description of the limits hardware (LMh) is
introduced and the SPI and I2C devices are wired to the GSI DMA controller.
On Snapdragon 865 (SM8250) the CPU and cluster idle states are
introduced, the MSI interrupts for PCIe 1 and 2 are corrected and the
CPUfreq driver gains knowledge about thermal pressure interrupts.
On Snapdragon 8 Gen 1 (SM8450) LLCC, interconnect and remoteproc
descriptions are added. The SM8450 Hardware Development Kit is
introduced and the QRD has its remoteproc instances enabled.
Cluster idle and RPMh parameters are corrected on SM8150, SM8350 and
SM8540.
The IPA device on SC7180, SC7280 and SM8350 gains knowledge of the AOSS
QMP mailbox, allowing it to enable retention of IPA registers during
power collapse.
DeviceTree validation issues related to thermal zone naming, missing
CPU, device and platform compatibles, APR, Google EC PWM, DB410c sound,
QCS404 opp-tables and SM8250 PCIe nodes are corrected.
A bunch of cleanups and style fixes for MSM8992, MSM8994, MSM8996 and
MSM8916 are introduced as well.
-----BEGIN PGP SIGNATURE-----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=rj9c
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=EUCM
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DeviceTree updates for v5.18
New platforms: Snapdragon 625 and Snapdragon 632
New boards: Google Herobrine R1, Fairphone FP3, SHIFT6mq, Samsung Galaxy
Book2 and Snapdragon 8 Gen 1 Hardware Development Kit (HDK)
On IPQ6018 the USB reference period is corrected, GICv2m support is
enabled and the max-link-speed for PCIe is specified.
IPQ8074 adds description of GIVv2m and SMEM, and ensures that TrustZone
related memory is reserved from Linux.
On the Snapdragon 7c Gen 3 (SC7280) description of display, displayport,
L3 interconnect, bluetooth, CPU opp-tables are added. Another revision
of the Google Herobrine is introduced and a bunch of cleanups are
introduced.
On Snapdragon 845 new support for the SHIFT6mq device is introduced, the
OnePlus devices gains fuel gauge and the platform gains GSI DMA support,
which is enabled for SPI (for now).
On the Snapdragon 850 based WindowsOnSnapdragon laptops, initial support
for Samsugn Galaxy Book2 is introduced and the Lenovo Yoga C630 gains
description of its backlight controls.
The Snapdragon 625 platform (MSM8953) the thereof derrived Snapdragon
632 platform is introduced, with initial description of the Fairphone 3.
Fairphone 4 on the SM7225 platform gains proper WLED configuration.
On Snapdragon 855 (SM8150) description of the limits hardware (LMh) is
introduced and the SPI and I2C devices are wired to the GSI DMA controller.
On Snapdragon 865 (SM8250) the CPU and cluster idle states are
introduced, the MSI interrupts for PCIe 1 and 2 are corrected and the
CPUfreq driver gains knowledge about thermal pressure interrupts.
On Snapdragon 8 Gen 1 (SM8450) LLCC, interconnect and remoteproc
descriptions are added. The SM8450 Hardware Development Kit is
introduced and the QRD has its remoteproc instances enabled.
Cluster idle and RPMh parameters are corrected on SM8150, SM8350 and
SM8540.
The IPA device on SC7180, SC7280 and SM8350 gains knowledge of the AOSS
QMP mailbox, allowing it to enable retention of IPA registers during
power collapse.
DeviceTree validation issues related to thermal zone naming, missing
CPU, device and platform compatibles, APR, Google EC PWM, DB410c sound,
QCS404 opp-tables and SM8250 PCIe nodes are corrected.
A bunch of cleanups and style fixes for MSM8992, MSM8994, MSM8996 and
MSM8916 are introduced as well.
* tag 'qcom-arm64-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (96 commits)
arm64: dts: qcom: sdm632: Add device tree for Fairphone 3
dt-bindings: arm: qcom: Document sdm632 and fairphone,fp3 board
arm64: dts: qcom: Add SDM632 device tree
arm64: dts: qcom: Add PM8953 PMIC
arm64: dts: qcom: Add MSM8953 device tree
dt-bindings: arm: cpus: Add Kryo 250 CPUs
arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor
arm64: dts: qcom: align Google CROS EC PWM node name with dtschema
arm64: dts: qcom: Add support for Samsung Galaxy Book2
arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1
arm64: dts: qcom: msm8996: add cxo and sleep-clk to gcc node
arm64: dts: qcom: sdm845: add bi_tcxo to camcc
arm64: dts: qcom: sdm845: enable dma for spi
arm64: dts: qcom: sdm845: Add gsi dma node
arm64: dts: qcom: sc7280: Add cpu OPP tables
arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider
arm64: dts: qcom: sm8450: Add LLCC/system-cache-controller node
arm64: dts: qcom: ipq6018: drop the clock-frequency property
arm64: dts: qcom: ipq8074: drop the clock-frequency property
arm64: dts: qcom: sm8450: add interconnect nodes
...
Link: https://lore.kernel.org/r/20220301053929.1809684-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch updates the format of memory node in DT adding the
device_type.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Link: https://lore.kernel.org/r/20220119123537.9968-3-sam.shih@mediatek.com
[mb: fixed commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch updates the format of memory node in DT adding the correct
device_type.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Link: https://lore.kernel.org/r/20220119123537.9968-2-sam.shih@mediatek.com
[mb: fixed commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-14-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon such as the MT7622.
Add basic support for Airoha EN7523, enough for booting to console.
The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-4-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add power domains controller node for SoC mt8192
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20210825010426.30303-1-chun-jie.chen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
CTERA Networks Intl. is a company based in Israel.
They manufacture NASes, network devices and provide software
products for cloud storage and IT security.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
With this change legacy INTA, INTB, INTC and INTD interrupts are reported
separately and not mixed into one Linux virq source anymore.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Luis Mendes <luis.p.mendes@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The clock binding documents PCIe clock for a long time already. Add
clock phande into the PCIe node.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
1. Minor fixes and cleanups in newly introduced support for Exynos850.
2. Add basic support for Exynos7885 and Samsung Galaxy A8 (2018):
SM-A530F.
-----BEGIN PGP SIGNATURE-----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=+2r/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=efOO
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.18, part two
1. Minor fixes and cleanups in newly introduced support for Exynos850.
2. Add basic support for Exynos7885 and Samsung Galaxy A8 (2018):
SM-A530F.
* tag 'samsung-dt64-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add initial device tree support for Exynos7885 SoC
arm64: dts: exynos: use dedicated wake-up pinctrl compatible in Exynos850
arm64: dts: exynos: align pinctrl with dtschema in Exynos850
arm64: dts: exynos: drop incorrectly placed wakeup interrupts in Exynos850
Link: https://lore.kernel.org/r/20220226220116.13452-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Based on the for-5.18/dt-bindings changes, this adds various new
features on Tegra234 such as IOMMU, audio, gpio-keys, I2C and PWM
support.
Device trees for 64-bit Tegra boards are now also built with overlay
support enabled, which allows firmware to apply overlays and customize
the DTB that is passed to the kernel.
There are also a couple of cleanups and additions for older devices,
such as USB device mode support on Jetson Xavier NX.
-----BEGIN PGP SIGNATURE-----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=ZfCL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=l0Ys
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.18-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.18-rc1
Based on the for-5.18/dt-bindings changes, this adds various new
features on Tegra234 such as IOMMU, audio, gpio-keys, I2C and PWM
support.
Device trees for 64-bit Tegra boards are now also built with overlay
support enabled, which allows firmware to apply overlays and customize
the DTB that is passed to the kernel.
There are also a couple of cleanups and additions for older devices,
such as USB device mode support on Jetson Xavier NX.
* tag 'tegra-for-5.18-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Drop arm,armv8-pmuv3 compatible string
arm64: tegra: Enable Jetson Xavier NX USB device mode
arm64: tegra: Enable UART instance on 40-pin header
arm64: tegra: Add HDA device tree node for Tegra234
arm64: tegra: Enable device-tree overlay support
arm64: tegra: APE sound card for Jetson AGX Orin
arm64: tegra: Add audio devices on Tegra234
arm64: tegra: Move audio IOMMU properties to ADMAIF node
arm64: tegra: Add Tegra234 IOMMUs
arm64: tegra: Enable gpio-keys on Jetson AGX Orin Developer Kit
arm64: tegra: Add GPCDMA node for tegra186 and tegra194
arm64: tegra: Add Tegra234 PWM devicetree nodes
arm64: tegra: Add Tegra234 I2C devicetree nodes
Link: https://lore.kernel.org/r/20220225164741.1064416-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The changes in this set are cleanups and fixes for 32-bit Tegra device
tree files. With these, some json-schema validation errors are fixed.
-----BEGIN PGP SIGNATURE-----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=gwvR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OP6Z
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.18-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.18-rc1
The changes in this set are cleanups and fixes for 32-bit Tegra device
tree files. With these, some json-schema validation errors are fixed.
* tag 'tegra-for-5.18-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tamonten: Fix I2C3 pad setting
ARM: tegra: Fix ethernet node names
ARM: tegra: paz00: Add MMC aliases
ARM: tegra: tf700t: Rename DSI node
ARM: tegra: transformer: Drop reg-shift for Tegra HS UART
ARM: tegra: asus-tf101: Enable S/PDIF and HDMI audio
ARM: tegra: Update jedec,lpddr2 revision-id binding
Link: https://lore.kernel.org/r/20220225164741.1064416-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AM62 StarterKit (SK) board is a low cost, small form factor board
designed for TI’s AM625 SoC. It supports the following interfaces:
* 2 GB DDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
* x1 HDMI Port with audio + x1 OLDI/LVDS Display interface for Dual Display
* x1 Headphone Jack
* x1 USB2.0 Hub with two Type A host and x1 USB Type-C DRP Port
* x1 UHS-1 capable µSD card slot
* 2.4/5 GHz WLAN + Bluetooth 4.2 through WL1837
* 512 Mbit OSPI flash
* x4 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* 40-pin User Expansion Connector
* 24-pin header for peripherals in MCU island (I2C, UART, SPI, IO)
* 20-pin header for Programmable Realtime Unit (PRU) IO pins
* 15-pin CSI header
Add basic support for AM62-SK.
Schematics: https://www.ti.com/lit/zip/sprr448
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20220225120239.1303821-6-vigneshr@ti.com
This add bare minimum DT for AM62 describing ARM compute clusters, Main,
MCU and Wakeup domain and interconnects, UARTs and I2Cs to enable
booting using ramdisk.
Hierarchy of dts files:
am62.dtsi:
base SoC skeleton which is common across am62xx family of SoCs,
includes am62-main.dtsi, am62-mcu.dtsi and am62-wakeup.dtsi
representing 3 domains and peripherals in each of these domain
am625.dtsi:
describes CPU cluster (Quad A53s). Since, am625 is a current superset
device with all peripherals, am625.dtsi includes am62.dtsi completing
SoC definition.
Individual EVMs using this SoC will just need to include am625.dtsi
thus making things easier for Board and SOM Vendors.
Future derivative SoCs will have their own am62{1-9}{1-9}.dtsi
overriding cluster / peripheral definitions with their own compatibles.
More details about the SoCs can be found in the Technical Reference Manual:
https://www.ti.com/lit/pdf/spruiv7
Co-developed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Co-developed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20220225120239.1303821-5-vigneshr@ti.com
Add pinctrl macros for AM62x SoCs. These macro definitions are similar
to that of previous platforms, but adding new definitions to avoid any
naming confusions in the SoC dts files.
checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses
However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220225120239.1303821-4-vigneshr@ti.com
The AM62 SoC family is the follow on AM335x built on K3 Multicore SoC
architecture platform, providing ultra-low-power modes, dual display,
multi-sensor edge compute, security and other BOM-saving integration.
The AM62 SoC targets broad market to enable applications such as
Industrial HMI, PLC/CNC/Robot control, Medical Equipment, Building
Automation, Appliances and more.
Some highlights of this SoC are:
* Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster.
Pin-to-pin compatible options for single and quad core are available.
* Cortex-M4F for general-purpose or safety usage.
* Dual display support, providing 24-bit RBG parallel interface and
OLDI/LVDS-4 Lane x2, up to 200MHz pixel clock support for 2K display
resolution.
* Selectable GPUsupport, up to 8GFLOPS, providing better user experience
in 3D graphic display case and Android.
* PRU(Programmable Realtime Unit) support for customized programmable
interfaces/IOs.
* Integrated Giga-bit Ethernet switch supporting up to a total of two
external ports (TSN capable).
* 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3x eMMC and SD, GPMC for
NAND/FPGA connection, OSPI memory controller, 3xMcASP for audio,
1x CSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals.
* Dedicated Centralized System Controller for Security, Power, and
Resource Management.
* Multiple low power modes support, ex: Deep sleep,Standby, MCU-only,
enabling battery powered system design.
AM625 is the first device of the family. Add DT bindings for the same.
More details can be found in the Technical Reference Manual:
https://www.ti.com/lit/pdf/spruiv7
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20220225120239.1303821-3-vigneshr@ti.com
Add watchdog device node to MT8192 SoC.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220207094024.22674-1-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Increase the size of the buffer and set the ftrace-size property in order
to collect event tracing during a crash.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211202224525.29178-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is a half-width, single-socket Epyc server board with an AST2500
BMC. This device tree is sufficient for basic OpenBMC functionality,
but we'll need to add a few more devices (as driver support becomes
available) before it's fully usable.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220105101719.7093-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Early Rainier builds had SPI NOR as a fallback boot device when eMMC
was not programmed. Most systems don't have the NOR populated, so remove
it from the device tree as it is not used.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220120063307.63898-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Move adc14 and adc15 (battery sensor) into single iio-hwmon node to
correct label to be read by single application for all adc sensors.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-6-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
GPIO hog nodes must have a "hog-" prefix or "-hog" suffix according to
the DT schema. Rename the node to pass dtbs_check.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-5-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
