- hid-core fix for long-standing cornercase of Resolution Multiplier not being
present in any of the Logical Collections in the device HID report descriptor
(Alan Stern)
The new ASUS ProArt 16" laptop series come with their keyboards stuck in
an Out-Of-Box-Experience mode. While in this mode most functions will
not work such as LED control or Fn key combos. The correct init sequence
is now done to disable this OOBE.
This patch addresses only the ProArt series so far and it is unknown if
there may be others, in which case a new quirk may be required.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Co-developed-by: Connor Belli <connorbelli2003@gmail.com>
Signed-off-by: Connor Belli <connorbelli2003@gmail.com>
Tested-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When a force feedback command is sent from userspace, work is scheduled to pass
this data to the controller without blocking userspace itself. However, in
theory, this work might not be properly canceled if the controller is removed
at the exact right time. This patch ensures the work is properly canceled when
the device is removed.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
A report in 2019 by the syzbot fuzzer was found to be connected to two
errors in the HID core associated with Resolution Multipliers. One of
the errors was fixed by commit ea427a222d ("HID: core: Fix deadloop
in hid_apply_multiplier."), but the other has not been fixed.
This error arises because hid_apply_multipler() assumes that every
Resolution Multiplier control is contained in a Logical Collection,
i.e., there's no way the routine can ever set multiplier_collection to
NULL. This is in spite of the fact that the function starts with a
big comment saying:
* "The Resolution Multiplier control must be contained in the same
* Logical Collection as the control(s) to which it is to be applied.
...
* If no Logical Collection is
* defined, the Resolution Multiplier is associated with all
* controls in the report."
* HID Usage Table, v1.12, Section 4.3.1, p30
*
* Thus, search from the current collection upwards until we find a
* logical collection...
The comment and the code overlook the possibility that none of the
collections found may be a Logical Collection.
The fix is to set the multiplier_collection pointer to NULL if the
collection found isn't a Logical Collection.
Reported-by: syzbot+ec5f884c4a135aa0dbb9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000109c040597dc5843@google.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Fixes: 5a4abb36f3 ("HID: core: process the Resolution Multiplier")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The addition of the "System Do Not Disturb" event code caused the Generic
Desktop D-Pad configuration to be skipped. This commit allows both to be
configured without conflicting with each other.
Fixes: 22d6d060ac ("input: Add support for "Do Not Disturb"")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This device sometimes doesn't send touch release signals when moving
from >=2 fingers to <2 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.
Signed-off-by: Enze Xie <enze@nfschina.com>
Signed-off-by: Youwan Wang <youwan@nfschina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Updated the device name for Apple Magic Trackpad USB-C when connected via
Bluetooth.
This change ensures the correct recognition of the 2024 USB-C trackpad and
improves user experience.
Signed-off-by: Qingyan Li <soragoto@soragoto.io>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit c8000deb68 ("HID: multitouch: Add support for GT7868Q") added
support for 0x01e8 and 0x01e9, but the mt_device[] entries were added
twice for 0x01e8 and there was none added for 0x01e9. Fix that.
Fixes: c8000deb68 ("HID: multitouch: Add support for GT7868Q")
Reported-by: He Lugang <helugang@uniontech.com>
Reported-by: WangYuli <wangyuli@uniontech.com>
Reported-by: Ulrich Müller <ulm@gentoo.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This reverts commit 251efae73b.
Quoting Wang Yuli:
"The 27C6:01E0 touchpad doesn't require the workaround and applying it
would actually break functionality.
The initial report came from a BBS forum, but we suspect the
information provided by the forum user may be incorrect which could
happen sometimes. [1]
Further investigation showed that the Lenovo Y9000P 2024 doesn't even
use a Goodix touchpad. [2]
For the broader issue of 27c6:01e0 being unusable on some devices, it
just need to address it with a libinput quirk.
In conclusion, we should revert this commit, which is the best
solution."
Reported-by: Ulrich Müller <ulm@gentoo.org>
Reported-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/all/uikt4wwpw@gentoo.org/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Save some lines of code and prepare for the constification of
'struct bin_attribute'.
Also align the definitions within the source file.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This solves keyboard not working until suspend&resume issue on Dell XPS
9345 13" (codenamed 'tributo').
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
It appears some keyboards from vendor 'QTEC' will not work properly until
suspend & resume.
Empirically narrowed down to solution of re-sending power on command
_after_ initialization was completed before the end of initial probing.
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When compiling these selftests the host-tools directory is generated.
Add it to the .gitignore so git doesn't see these files as trackable.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
If an LED has a default_trigger set prior to being registered with
the subsystem, that trigger will be executed with a brightness value
defined by `trigger->brightness`. Our driver was not setting this
value, which was causing problems. It would cause the selected LED
to be turned off, as well as corrupt the hlv/llv values assigned to
other LEDs (since calling `wacom_led_brightness_set` will overite
these values).
This patch sets the value of `trigger->brightness` to an appropriate
value. We use `wacom_leds_brightness_get` to transform the llv/hlv
values into a brightness that is understood by the rest of the LED
subsystem.
Fixes: 822c91e72e ("leds: trigger: Store brightness set by led_trigger_event()")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
-----BEGIN PGP SIGNATURE-----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=9aQY
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmdO8FgACgkQ+iyteGJfRsqdmgCgqPArbZweV/LTPcZXx89MaIEd
hG8AoLrh8n5L08d6r5v1sII5To4KoZI7
=IX0/
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
-----BEGIN PGP SIGNATURE-----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=tI5g
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs about EFI screen info, hugetlb pte clear and Lockdep-RCU
splat in KVM, plus some trival cleanups"
* tag 'loongarch-fixes-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Protect kvm_io_bus_{read,write}() with SRCU
LoongArch: KVM: Protect kvm_check_requests() with SRCU
LoongArch: BPF: Adjust the parameter of emit_jirl()
LoongArch: Add architecture specific huge_pte_clear()
LoongArch/irq: Use seq_put_decimal_ull_width() for decimal values
LoongArch: Fix reserving screen info memory for above-4G firmware
Fixes:
- asus-nb-wmi: Silence unknown event warning when charger is plugged in
- asus-wmi: Handle return code variations during thermal policy writing
graciously
- samsung-laptop: Correct module description
The following is an automated shortlog grouped by driver:
asus-nb-wmi:
- Ignore unknown event 0xCF
asus-wmi:
- Ignore return value when writing thermal policy
samsung-laptop:
- Match MODULE_DESCRIPTION() to functionality
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ1BHIgAKCRBZrE9hU+XO
MYFkAQC0IAlh+vv8BUxsKgaikmbxwvhC8dIjDzMLqeQUnKTDmgD/ZaiKpwK508bN
SYrpL2CnVXFjX4ZAewZiewCVQdIbXAo=
=DOpQ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-nb-wmi: Silence unknown event warning when charger is plugged in
- asus-wmi: Handle return code variations during thermal policy writing
graciously
- samsung-laptop: Correct module description
* tag 'platform-drivers-x86-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-nb-wmi: Ignore unknown event 0xCF
platform/x86: asus-wmi: Ignore return value when writing thermal policy
platform/x86: samsung-laptop: Match MODULE_DESCRIPTION() to functionality
-----BEGIN PGP SIGNATURE-----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=4mFO
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- add lockdep annotations for io_uring/encoded read integration, inode
lock is held when returning to userspace
- properly reflect experimental config option to sysfs
- handle NULL root in case the rescue mode accepts invalid/damaged tree
roots (rescue=ibadroot)
- regression fix of a deadlock between transaction and extent locks
- fix pending bio accounting bug in encoded read ioctl
- fix NOWAIT mode when checking references for NOCOW files
- fix use-after-free in a rb-tree cleanup in ref-verify debugging tool
* tag 'for-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lockdep warnings on io_uring encoded reads
btrfs: ref-verify: fix use-after-free after invalid ref action
btrfs: add a sanity check for btrfs root in btrfs_search_slot()
btrfs: don't loop for nowait writes when checking for cross references
btrfs: sysfs: advertise experimental features only if CONFIG_BTRFS_EXPERIMENTAL=y
btrfs: fix deadlock between transaction commits and extent locks
btrfs: fix use-after-free in btrfs_encoded_read_endio()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmdO+0sACgkQnJ2qBz9k
QNmO3ggAj4+twojXoYiJrB2s2p0hLa9ZSEvUyWAAo7KiThoImceT/Duv2jMjEAzS
iOiNkzrsEYWXJXzE9qVjcWi6nar/SxV+P2T0fyrws3eYIQ1elj4Ju+6F+k8pM6Ji
twa6Y5JYLsFwmGvMsW/Sv46neFqPrdFK56R+zDPumTWxcRawqNU8IGtpEAodBEjo
F34J7/JZUraa3pTIDrEHDnyDqBeFY3XySofw/4+T6bQ4FE/hiqsXKI6cNc8nXqh4
GB+qISWes3YzGgt6tCC0PM9V1c4s1V//avO+6DRe+wrcVx3I6ZIZuC3Qcy2Eq4jh
bZ6tYYlSfMH15Ajkxhuw+3hVZDq8nw==
=imng
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and udf fixes from Jan Kara:
"Two small UDF fixes for better handling of corrupted filesystem and a
quota fix to fix handling of filesystem freezing"
* tag 'fs_for_v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Verify inode link counts before performing rename
udf: Skip parent dir link count update if corrupted
quota: flush quota_release_work upon quota writeback
* Use xchg() in xlog_cil_insert_pcp_aggregate()
* Fix ABBA deadlock on a race between mount and log shutdown
* Fix quota softlimit incoherency on delalloc
* Fix sparse inode limits on runt AG
* remove unknown compat feature checks in SB write valdation
* Eliminate a lockdep false positive
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQQMHYkcUKcy4GgPe2RGdaER5QtfpgUCZ072iwAKCRBGdaER5Qtf
prtCAX4kKOVnDzn2dX4YWpFaPAFvaWbiH0GIIVIiRuQLqzARya/lurNXjfanuotc
4oJ3JacBgJ1MWYiBX2j95AEHJaes/G3Nm+EsXeqefWWxxQvrCcQt5kdtw1fVY8kz
5NCMUtxjIQ==
=FM4s
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.13-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
- Use xchg() in xlog_cil_insert_pcp_aggregate()
- Fix ABBA deadlock on a race between mount and log shutdown
- Fix quota softlimit incoherency on delalloc
- Fix sparse inode limits on runt AG
- remove unknown compat feature checks in SB write valdation
- Eliminate a lockdep false positive
* tag 'xfs-fixes-6.13-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't call xfs_bmap_same_rtgroup in xfs_bmap_add_extent_hole_delay
xfs: Use xchg() in xlog_cil_insert_pcp_aggregate()
xfs: prevent mount and log shutdown race
xfs: delalloc and quota softlimit timers are incoherent
xfs: fix sparse inode limits on runt AG
xfs: remove unknown compat feature check in superblock write validation
xfs: eliminate lockdep false positives in xfs_attr_shortform_list
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts the misconversions introduced by commit cdd30ebb1b
("module: Convert symbol namespace to string literal").
The affected descriptions refer to MODULE_IMPORT_NS() tags in general,
rather than suggesting the use of the empty string ("") as the
namespace.
Fixes: cdd30ebb1b ("module: Convert symbol namespace to string literal")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit cdd30ebb1b ("module: Convert symbol namespace to string
literal"), when MODULE_IMPORT_NS() is missing, 'make nsdeps' inserts
pointless code:
MODULE_IMPORT_NS("ns");
Here, "ns" is not a namespace, but the variable in the semantic patch.
It must not be quoted. Instead, a string literal must be passed to
Coccinelle.
Fixes: cdd30ebb1b ("module: Convert symbol namespace to string literal")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On the Asus X541UAK an unknown event 0xCF is emited when the charger
is plugged in. This is caused by the following AML code:
If (ACPS ())
{
ACPF = One
Local0 = 0x58
If (ATKP)
{
^^^^ATKD.IANE (0xCF)
}
}
Else
{
ACPF = Zero
Local0 = 0x57
}
Notify (AC0, 0x80) // Status Change
If (ATKP)
{
^^^^ATKD.IANE (Local0)
}
Sleep (0x64)
PNOT ()
Sleep (0x0A)
NBAT (0x80)
Ignore the 0xCF event to silence the unknown event warning.
Reported-by: Pau Espin Pedrol <pespin@espeweb.net>
Closes: https://lore.kernel.org/platform-driver-x86/54d4860b-ec9c-4992-acf6-db3f90388293@espeweb.net
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241123224700.18530-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On some machines like the ASUS Vivobook S14 writing the thermal policy
returns the currently writen thermal policy instead of an error code.
Ignore the return code to avoid falsely returning an error when the
thermal policy was written successfully.
Reported-by: auslands-kv@gmx.de
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219517
Fixes: 2daa86e78c ("platform/x86: asus_wmi: Support throttle thermal policy")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241124171941.29789-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The branch instructions beq, bne, blt, bge, bltu, bgeu and jirl belong
to the format reg2i16, but the sequence of oprand is different for the
instruction jirl. So adjust the parameter order of emit_jirl() to make
it more readable correspond with the Instruction Set Architecture manual.
Here are the instruction formats:
beq rj, rd, offs16
bne rj, rd, offs16
blt rj, rd, offs16
bge rj, rd, offs16
bltu rj, rd, offs16
bgeu rj, rd, offs16
jirl rd, rj, offs16
Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#branch-instructions
Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When executing mm selftests run_vmtests.sh, there is such an error:
BUG: Bad page state in process uffd-unit-tests pfn:00000
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0
flags: 0xffff0000002000(reserved|node=0|zone=0|lastcpupid=0xffff)
raw: 00ffff0000002000 ffffbf0000000008 ffffbf0000000008 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Modules linked in: snd_seq_dummy snd_seq snd_seq_device rfkill vfat fat
virtio_balloon efi_pstore virtio_net pstore net_failover failover fuse
nfnetlink virtio_scsi virtio_gpu virtio_dma_buf dm_multipath efivarfs
CPU: 2 UID: 0 PID: 1913 Comm: uffd-unit-tests Not tainted 6.12.0 #184
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
Stack : 900000047c8ac000 0000000000000000 9000000000223a7c 900000047c8ac000
900000047c8af690 900000047c8af698 0000000000000000 900000047c8af7d8
900000047c8af7d0 900000047c8af7d0 900000047c8af5b0 0000000000000001
0000000000000001 900000047c8af698 10b3c7d53da40d26 0000010000000000
0000000000000022 0000000fffffffff fffffffffe000000 ffff800000000000
000000000000002f 0000800000000000 000000017a6d4000 90000000028f8940
0000000000000000 0000000000000000 90000000025aa5e0 9000000002905000
0000000000000000 90000000028f8940 ffff800000000000 0000000000000000
0000000000000000 0000000000000000 9000000000223a94 000000012001839c
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d
...
Call Trace:
[<9000000000223a94>] show_stack+0x5c/0x180
[<9000000001c3fd64>] dump_stack_lvl+0x6c/0xa0
[<900000000056aa08>] bad_page+0x1a0/0x1f0
[<9000000000574978>] free_unref_folios+0xbf0/0xd20
[<90000000004e65cc>] folios_put_refs+0x1a4/0x2b8
[<9000000000599a0c>] free_pages_and_swap_cache+0x164/0x260
[<9000000000547698>] tlb_batch_pages_flush+0xa8/0x1c0
[<9000000000547f30>] tlb_finish_mmu+0xa8/0x218
[<9000000000543cb8>] exit_mmap+0x1a0/0x360
[<9000000000247658>] __mmput+0x78/0x200
[<900000000025583c>] do_exit+0x43c/0xde8
[<9000000000256490>] do_group_exit+0x68/0x110
[<9000000000256554>] sys_exit_group+0x1c/0x20
[<9000000001c413b4>] do_syscall+0x94/0x130
[<90000000002216d8>] handle_syscall+0xb8/0x158
Disabling lock debugging due to kernel taint
BUG: non-zero pgtables_bytes on freeing mm: -16384
On LoongArch system, invalid huge pte entry should be invalid_pte_table
or a single _PAGE_HUGE bit rather than a zero value. And it should be
the same with invalid pmd entry, since pmd_none() is called by function
free_pgd_range() and pmd_none() return 0 by huge_pte_clear(). So single
_PAGE_HUGE bit is also treated as a valid pte table and free_pte_range()
will be called in free_pmd_range().
free_pmd_range()
pmd = pmd_offset(pud, addr);
do {
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
continue;
free_pte_range(tlb, pmd, addr);
} while (pmd++, addr = next, addr != end);
Here invalid_pte_table is used for both invalid huge pte entry and
pmd entry.
Cc: stable@vger.kernel.org
Fixes: 09cfefb7fa ("LoongArch: Add memory management")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Performance improvement for reading /proc/interrupts on LoongArch.
On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which is less efficient than
seq_put_decimal_ull_width(), stress reading /proc/interrupts indicates
~30% performance improvement with this patch (and its friends).
Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Since screen_info.lfb_base is a __u32 type, an above-4G address need an
ext_lfb_base to present its higher 32bits. In init_screen_info() we can
use __screen_info_lfb_base() to handle this case for reserving screen
info memory.
Signed-off-by: Xuefeng Zhao <zhaoxuefeng@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
core: add of based component probing
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
Instead of a delicate dance between drivers and device tree quirks, this
change introduces a simple I2C component probe function. For a given
class of devices on the same I2C bus, it will go through all of them,
doing a simple I2C read transfer and see which one of them responds. It
will then enable the device that responds.
-----BEGIN PGP SIGNATURE-----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=MAxU
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
- Remove unused bprintf() function
bprintf() was added with the rest of the "bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0yNShQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmJ6AP9i8pFOjeMfb2hOBpJTzORkIXEbz5nG
OCK/5aeSdjxy8QEAqafBSr5IQOxaTCFve1p7WSwdgmi2ZLmqEasaud0LmAk=
=5bp1
-----END PGP SIGNATURE-----
Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function __udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmdMQ2sACgkQEsHwGGHe
VUoRGBAAt8luiDBdMHIcD053RHsLr7Oocg5AI/t0PVxYxJ+89o0cSdDx2vaaXiyX
+vRSkdvH5mfwvwW4XRJZkVWbzOjMiA6m7FwH667XGzEedIq4vtgs5Rd/1YStSfIx
ceQfD2N+34esamxiGGBlzjNO2GdqI2XMo/Fc6LuPCTfPBqELCL8OpbEdOV8Ltwxr
mRsmbCNazBtw31Yo3zp9UZIVVSAzJFmWOoK0M+xm6S91YPYaKQ9RYk2QQwLizVgR
N++dniNV6yZuSLTzr4dNckrvl744Iqc4Sy8iy2CL9rNFZkb+3q5CAAQggGNlY2U9
0W95tgwpy/Qt6drfsyam3+PR5Smwjnh/0mrk3sLzUCdy9Y6L2HgKmrvHk4Rqq/66
N6uIjIDmou+L0FUcdUducRnMOgQnvfIB/l6hIAHHkDap7iL8oy74JDzzk0jnNKHw
1I5kGbKqXz0ucdxge6H1BHqCc/roobwC05/TWLPAQ5IG0BtQFPGAwd901AZtANkk
/FfWUq7IT6PW05T2co7O75NjgMvU3QV0Sf5E9vkV/+R9WtTKT13FmZ8+rC6zaC7o
Juml/lRWeTCyuot3vv29NtcvY6j+gy/RrKWL4iNWDlXznntR2DAhIkzRCF+1yTSb
z0RSOrY2BSsk2iqeUh8ydet5OEyPiMXwiHVbxUHzJ4R/7qaxsB8=
=X4bb
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
