Currently link ID information is not passed to mac80211 via Rx status by
mac80211_hwsim. This leads to packet getting dropped in function
__ieee80211_rx_handle_packet since it expects the link ID if packet is
intended for a MLO station and the station is not directly passed via
pubsta function argument.
Add changes to pass the link ID information in Rx status.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240313145402.456514-1-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently kernel-doc raises "warning: bad line:" for several comments
that have invalid multi-line comment style; they are missing the
leading '*'. And checkpatch.pl raises "WARNING: please, no space
before tabs" for a large number of comments which have space then tab
after the leading '*'.
Fix those issues.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240319-kdoc-nl80211-v1-2-549e09d52866@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
kernel-doc flagged the following issue:
include/uapi/linux/nl80211.h:6081: warning: expecting prototype for enum nl80211_plink_action. Prototype was for enum plink_actions instead
This is because the documentation doesn't match the code. Normally the
correct fix for such an issue is to modify the documentation to match
the code. However, in this case, since the actual name plink_actions
is not referenced by any code, rename it to nl80211_plink_action to
give it a proper prefix and match the documentation.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240319-kdoc-nl80211-v1-1-549e09d52866@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current mac80211 won't parsing puncturing bitmap when process EHT
Operation element in 6 GHz band or Bandwidth Indication element. This
leads to puncturing bitmap cannot be updated in related situations, such
as connecting to an EHT AP in 6 GHz band.
So supplement parsing of puncturing bitmap for these elements.
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Link: https://msgid.link/20240312045947.576231-2-quic_kangyang@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a duplicate entry for 0x51f1, which shouldn't be present,
though the first entry will correctly be taken. Remove the second
one.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.3e995954d519.I0d028993e17e26b63c0ee89d7b1714ec88f2a158@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To support staring internal scan, refactor the scan code such
that the body iwl_mvm_reg_scan_start() is now moved to a local
function that can be used by other flows as well.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.e7833d4cfc53.I43c1c533c2a5243229002fde6360d423946c54fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware has handled quiet in CSA for a long time now, but
it didn't really matter much. However, now with quiet CSA on a
perhaps secondary link, we don't want mac80211 to stop queues,
we can continue using a link that's not requiring quiet. Set
the feature flag for MLO-capable devices indicating that we'll
handle the quiet entirely in the driver/device.
However, the firmware doesn't handle quiet in AP mode since we
don't really expect to really be needing that (without radar
detection), but - even for testing - make that work properly
by simply not pulling from TXQs in this scenario.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.fa75403b5eaa.Ie3ff02215f810fcfefd6a22c481567f94f61c0c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If, for any reason, we're going to attempt to flush the queues
while quiet CSA is happening, this cannot succeed. This could
be the case if for example mac80211 were to flush after TXing
e.g. a deauth frame due to disconnecting during the CSA.
In this case, drop the frames instead, the firmware won't let
us do any transmissions and may also become unhappy if we're
not going to disconnect quickly enough.
Currently this doesn't happen as mac80211 stops queues, but
we'll want to let mac80211 know not to stop queues for proper
multi-link support during CSA, so we need to handle this case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.d5d629f32ea8.I86d9b849d92273542bfc2d9c671b66179e7ebb72@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In version 4, in case of MLO GTK rekey during D3,
the firmware sends all the new keys, including
the keys on the non-active links.
Update also the non active link keys.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.6524de988ed3.Id065ddd2f4a71b0243c33ae0c5476ac41bfe2dc2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When waking up from wowlan, we iterate over the current
keys and remove those that were rekeyed.
With MLO, there might be keys of other links which should
not be removed.
Skip MLO keys on other links (other than the wowlan
active link).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.fdf527b50d61.I605a971d2d68107769dd363b896b471998259e64@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO, the station id in d3 can be other than 0.
Do not assume the station id is 0 when waking
up from d3.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.6379619f2987.I83de9d868224df76eee8df8dbcf352636535821a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With MLO, the station id in wowlan can be other than 0.
Set the correct station in the protocol offload command.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.ace4f793872d.Id984110576a72acc84493217ca95564c3cd362bd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from struct qtnf_bus by converting it
into a pointer. Then use the leverage alloc_netdev() to allocate the
net_device object at qtnf_pcie_probe(). The free of the device occurs at
qtnf_pcie_remove().
[1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240319172634.894327-1-leitao@debian.org
Fix the following sparse warnings:
drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:1133:29: error: too long token expansion
drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:1133:29: error: too long token expansion
drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:1133:29: error: too long token expansion
drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:1133:29: error: too long token expansion
No functional changes, compile tested only.
Fixes: e3296759f3 ("wifi: mt76: mt7915: enable per bandwidth power limit support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/5457b92e41909dd75ab3db7a0e9ec372b917a386.1710858172.git.lorenzo@kernel.org
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() will be converted as weel if they have.
Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended
CC: Kalle Valo <kvalo@kernel.org>
CC: linux-wireless@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240315055211.1347548-3-lizhijian@fujitsu.com
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() will be converted as weel if they have.
Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended
CC: Larry Finger <Larry.Finger@lwfinger.net>
CC: Kalle Valo <kvalo@kernel.org>
CC: linux-wireless@vger.kernel.org
CC: b43-dev@lists.infradead.org
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240315055211.1347548-2-lizhijian@fujitsu.com
The module metadata for the firmware file mrvl/sd8801_uapsta.bin
is missing.
Signed-off-by: Víctor Gonzalo <victor.gonzalo@anddroptable.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240313183156.2234301-1-victor.gonzalo@anddroptable.net
This driver uses the new rtw8703b chip driver code.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For SDIO
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240311103735.615541-10-fiona.klute@gmx.de
Sometimes 8703b firmware is still active from previous use when the
driver needs to download the firmware during MAC activation. Reset it
in that case.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240311103735.615541-9-fiona.klute@gmx.de
Initialization tables for rtw8703b: Initial register values and TX
power limits.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240311103735.615541-8-fiona.klute@gmx.de
This is the main source for the new rtw88_8703b chip driver.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240311103735.615541-6-fiona.klute@gmx.de
This is the main header for the new rtw88_8703b chip driver.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240311103735.615541-5-fiona.klute@gmx.de
default_cck_index is used in power track, the rx_cck_agc_report_type
for RX PHY status. GET_RX_DESC_BW is an RX descriptor field not used
by the other chip drivers.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240311103735.615541-4-fiona.klute@gmx.de
Some 8703b chips contain invalid EFUSE data, getting detailed
information is critical when analyzing issues caused by that.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240311103735.615541-3-fiona.klute@gmx.de
The already supported 8723d chip is very similar to 8703b/8723cs,
split code that can be shared into a new module. The spec definition
tables are combined into a struct so we only need one EXPORT_SYMBOL
for them all.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240311103735.615541-2-fiona.klute@gmx.de
Add 8922AE to Makefile and Kconfig. Currently, it can support STA, AP and
monitor modes with good performance. Implemented initial BT-coexistence
function only, and will to fine tune this component.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240312013721.17452-7-pkshih@realtek.com
Implement the chip operation function for 8922a, it related to TX power,
RX gain, antenna position, packet priority and so on. Also assign
coexistence priority table for hardware PTA using. Add settings to avoid
uncertainties propagation when Wi-Fi Rx due to RF gain mismatch.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240312013721.17452-6-pkshih@realtek.com
In order to packet up the slots information, the TLV header has updated.
TDMA slot parameters also use the TLV header to packet up to H2C, so
upgrade to version 7.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240312013721.17452-5-pkshih@realtek.com
In order to packet up the slots information, the TLV header has updated.
TDMA also use the TLV header to packet up to H2C, so upgrade to version 7.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240312013721.17452-4-pkshih@realtek.com
Because there is new hardware structure and Wi-Fi 7 protocol,
the antenna settings need to concern more complex for Wi-Fi 7
using. The antenna setting included grant control signal, they
decide which MAC/Port or Bluetooth can do traffic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240312013721.17452-3-pkshih@realtek.com
In order to control the hardware band and related protocol control,
add version 8 format and related logic to control the mechanism.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240312013721.17452-2-pkshih@realtek.com
Having an empty default: case in a switch statement causes a warning
(when using Clang; I don't see the warning when using gcc),
so add a "break;" to the default case to prevent the warning:
drivers/ssb/main.c:1149:2: warning: label at end of compound statement is a C2x extension [-Wc2x-extensions]
Fixes: e27b02e23a ("ssb: drop use of non-existing CONFIG_SSB_DEBUG symbol")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403130717.TWm17FiD-lkp@intel.com/
Cc: Michael Büsch <m@bues.ch>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: llvm@lists.linux.dev
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240313001305.18820-1-rdunlap@infradead.org
CONFIG_SSB_DEBUG is used in one header file and nowhere else, so
remove it and the now-empty inline function that contained it. Also
remove the call to the empty inline function. The empty "default:"
case is kept to prevent 2 compiler warnings:
drivers/ssb/main.c:1133:9: warning: enumeration value 'SSB_BUSTYPE_PCMCIA' not handled in switch [-Wswitch]
drivers/ssb/main.c:1133:9: warning: enumeration value 'SSB_BUSTYPE_SDIO' not handled in switch [-Wswitch]
Reported-by: Ying Sun <sunying@isrc.iscas.ac.cn>
Link: https://lore.kernel.org/lkml/4e8525fe.607e2.18a8ddfdce8.Coremail.sunying@isrc.iscas.ac.cn/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Büsch <m@bues.ch>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@kernel.org>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240309224540.22682-1-rdunlap@infradead.org
CYW43439 is a Wi-Fi + Bluetooth combo device from Infineon. The
WiFi part is capable of 802.11 b/g/n. This chip is present e.g.
on muRata 1YN module. Extend the binding with its DT compatible.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240309031355.269835-1-marex@denx.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/a92e4b2f7aace64a1e3a91af7974a6982700a18f.1709886922.git.u.kleine-koenig@pengutronix.de
The kzalloc() in brcmf_pcie_download_fw_nvram() will return null
if the physical memory has run out. As a result, if we use
get_random_bytes() to generate random bytes in the randbuf, the
null pointer dereference bug will happen.
In order to prevent allocation failure, this patch adds a separate
function using buffer on kernel stack to generate random bytes in
the randbuf, which could prevent the kernel stack from overflow.
Fixes: 91918ce88d ("wifi: brcmfmac: pcie: Provide a buffer of random bytes to the device")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240306140437.18177-1-duoming@zju.edu.cn
The ssb_device_uevent() function first attempts to convert the 'dev' pointer
to 'struct ssb_device *'. However, it mistakenly dereferences 'dev' before
performing the NULL check, potentially leading to a NULL pointer
dereference if 'dev' is NULL.
To fix this issue, move the NULL check before dereferencing the 'dev' pointer,
ensuring that the pointer is valid before attempting to use it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240306123028.164155-1-rand.sec96@gmail.com
We used EHT capability of 20MHz-only as rate mask to RA (rate adaptive)
H2C command when connecting with AP set EHT 20MHz. It would get the
wrong rate mask and the MCS rate can only reach MCS11.
According to the description of 802.11be spec, if all supported channel
bandwidth field of HE PHY capabilities are zero, then the EHT capability
of 20MHz-only is valid. As a result, we adjust the code to set correct
rate mask based on HE PHY bandwidth capability.
Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240305004502.6655-1-pkshih@realtek.com
Herve Codina says:
====================
Add support for QMC HDLC
This series introduces the QMC HDLC support.
Patches were previously sent as part of a full feature series and were
previously reviewed in that context:
"Add support for QMC HDLC, framer infrastructure and PEF2256 framer" [1]
In order to ease the merge, the full feature series has been split and
needed parts were merged in v6.8-rc1:
- "Prepare the PowerQUICC QMC and TSA for the HDLC QMC driver" [2]
- "Add support for framer infrastructure and PEF2256 framer" [3]
This series contains patches related to the QMC HDLC part (QMC HDLC
driver):
- Introduce the QMC HDLC driver (patches 1 and 2)
- Add timeslots change support in QMC HDLC (patch 3)
- Add framer support as a framer consumer in QMC HDLC (patch 4)
Compare to the original full feature series, a modification was done on
patch 3 in order to use a coherent prefix in the commit title.
I kept the patches unsquashed as they were previously sent and reviewed.
Of course, I can squash them if needed.
Compared to the previous iteration:
https://lore.kernel.org/linux-kernel/20240306080726.167338-1-herve.codina@bootlin.com/
this v7 series mainly:
- Rename a variable.
- Fix reverse xmas tree declarations.
- Add 'Acked-by' tag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add framer support in the fsl_qmc_hdlc driver in order to be able to
signal carrier changes to the network stack based on the framer status
Also use this framer to provide information related to the E1/T1 line
interface on IF_GET_IFACE and configure the line interface according to
IF_IFACE_{E1,T1} information.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QMC channels support runtime timeslots changes but nothing is done at
the QMC HDLC driver to handle these changes.
Use existing IFACE ioctl in order to configure the timeslots to use.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These helpers scatters or gathers a bitmap with the help of the mask
position bits parameter.
bitmap_scatter() does the following:
src: 0000000001011010
||||||
+------+|||||
| +----+||||
| |+----+|||
| || +-+||
| || | ||
mask: ...v..vv...v..vv
...0..11...0..10
dst: 0000001100000010
and bitmap_gather() performs this one:
mask: ...v..vv...v..vv
src: 0000001100000010
^ ^^ ^ 0
| || | 10
| || > 010
| |+--> 1010
| +--> 11010
+----> 011010
dst: 0000000000011010
bitmap_gather() can the seen as the reverse bitmap_scatter() operation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230926052007.3917389-3-andriy.shevchenko@linux.intel.com/
Co-developed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After contributing the driver, add myself as the maintainer for the
Freescale QMC HDLC driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The QMC HDLC driver provides support for HDLC using the QMC (QUICC
Multichannel Controller) to transfer the HDLC data.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
ethtool: ice: Support for RSS settings to GTP
Takeru Hayasaka enables RSS functionality for GTP packets on ice driver
with ethtool.
A user can include TEID and make RSS work for GTP-U over IPv4 by doing the
following:`ethtool -N ens3 rx-flow-hash gtpu4 sde`
In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e,
gtpu(4|6)u, and gtpu(4|6)d.
gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does
not include a TEID.
gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that
includes a TEID.
gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios.
gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6.
gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended
header includes Uplink, applicable to both IPv4 and IPv6.
gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink,
for both IPv4 and IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
