commit 963845748f upstream.
Commit bc264fea0f ("iomap: support incremental iomap_iter advances")
changed the error handling logic in iomap_iter(). Previously any error
from iomap_dio_bio_iter() got propagated to userspace, after this commit
if ->iomap_end returns error, it gets propagated to userspace instead of
an error from iomap_dio_bio_iter(). This results in unaligned writes to
ext4 to silently fallback to buffered IO instead of erroring out.
Now returning ENOTBLK for DIO writes from ext4_iomap_end() seems
unnecessary these days. It is enough to return ENOTBLK from
ext4_iomap_begin() when we don't support DIO write for that particular
file offset (due to hole).
Fixes: bc264fea0f ("iomap: support incremental iomap_iter advances")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Message-ID: <20250901112739.32484-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8b90e6387 upstream.
The implicit __GFP_NOFAIL flag in ext4_sb_bread() was removed in commit
8a83ac5494 ("ext4: call bdev_getblk() from sb_getblk_gfp()"), meaning
the function can now fail under memory pressure.
Most callers of ext4_sb_bread() propagate the error to userspace and do not
remount the filesystem read-only. However, ext4_free_branches() handles
ext4_sb_bread() failure by remounting the filesystem read-only.
This implies that an ext3 filesystem (mounted via the ext4 driver) could be
forcibly remounted read-only due to a transient page allocation failure,
which is unacceptable.
To mitigate this, introduce a new helper function, ext4_sb_bread_nofail(),
which explicitly uses __GFP_NOFAIL, and use it in ext4_free_branches().
Fixes: 8a83ac5494 ("ext4: call bdev_getblk() from sb_getblk_gfp()")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56a2d85ee8 upstream.
For HFI Gen1, the instances substate is changed to LOAD_RESOURCES only
when a START command is issues to the firmware. If STOP is called
without a prior START, the firmware may reject the command and throw
some erros.
Handle this by adding a substate check before issuing STOP command to
the firmware.
Fixes: 11712ce70f ("media: iris: implement vb2 streaming ops")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2dbd2645c0 upstream.
Previously, the format validation relied on an array of supported
formats, which only listed formats for the OUTPUT plane. This caused
failures when validating formats for the CAPTURE plane.
Update the check to validate against the only supported format on the
CAPTURE plane, which is NV12.
Fixes: fde6161d91 ("media: iris: Add HEVC and VP9 formats for decoder")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8172f57746 upstream.
Improve drain handling by ensuring the LAST flag is attached to final
capture buffer when drain response is received from the firmware.
Previously, the driver failed to attach the V4L2_BUF_FLAG_LAST flag when
a drain response was received from the firmware, relying on userspace to
mark the next queued buffer as LAST. This update fixes the issue by
checking the pending drain status, attaching the LAST flag to the
capture buffer received from the firmware (with EOS attached), and
returning it to the V4L2 layer correctly.
Fixes: d09100763b ("media: iris: add support for drain sequence")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dec073dd84 upstream.
Firmware can handle a dummy address for buffers with the EOS flag. To
ensure consistent behavior across all codecs, update the drain
command to always send a dummy buffer address.
This makes the drain handling uniform and avoids any codec specific
assumptions.
Fixes: 478c447861 ("media: iris: Add codec specific check for VP9 decoder drain handling")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a432174ac upstream.
Update the vbuf flags appropriately in error cases before calling
v4l2_m2m_buf_done(). Previously, the flag update was skippied in error
scenario, which could result in incorrect state reporting for buffers.
Fixes: 17f2a485ca ("media: iris: implement vb2 ops for buf_queue and firmware response")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0fe10666d3 upstream.
Remove earlier complex conditional checks in the non-streaming path that
attempted to verify if stop was called on a plane that was previously
started. These explicit checks are redundant, as vb2 already ensures
that stop is only called on ports that have been started, maintaining
correct buffer state management.
Fixes: 11712ce70f ("media: iris: implement vb2 streaming ops")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cae3619e4 upstream.
Currently, internal buffers are destroyed only if 'PENDING_RELEASE' flag
is set when a release response is received from the firmware, which is
incorrect. Internal buffers should always be destroyed when the firmware
explicitly releases it, regardless of whether the 'PENDING_RELEASE' flag
was set by the driver. This is specially important during force-stop
scenarios, where the firmware may release buffers without driver marking
them for release.
Fix this by removing the incorrect check and ensuring all buffers are
properly cleaned up.
Fixes: 73702f45db ("media: iris: allocate, initialize and queue internal buffers")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65f72c6a8d upstream.
A client (e.g., GST for encoder) can initiate streaming on the capture
port before the output port, causing the instance state to transition to
OUTPUT_STREAMING. When streaming is subsequently started on the output
port, the instance state advances to STREAMING, and the substate should
transition to LOAD_RESOURCES.
Previously, the code blocked the substate transition to LOAD_RESOURCES
if the instance state was OUTPUT_STREAMING. This update modifies the
logic to permit the substate transition to LOAD_RESOURCES when the
instance state is OUTPUT_STREAMING, thereby supporting this client
streaming sequence.
Fixes: 547f7b8c50 ("media: iris: add check to allow sub states transitions")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cba6aed422 upstream.
Initialize the count variable to zero before counting unreleased
internal buffers in iris_check_num_queued_internal_buffers().
This prevents stale values from previous iterations and ensures accurate
error reporting for each buffer type. Without this initialization, the
count could accumulate across types, leading to incorrect log messages.
Fixes: d2abb1ff5a ("media: iris: Verify internal buffer release on close")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b67ef9b33 upstream.
The previous check to block capture port streaming before output port
was incorrect and caused some valid usecase to fail. While removing that
check allows capture port to enter streaming independently, it also
introduced firmware errors due to premature queuing of DPB buffers
before the firmware session was fully started which happens only when
streamon is called on output port.
Fix this by deferring DPB buffer queuing to the firmware until both
capture and output are streaming and state is 'STREAMING'.
Fixes: 11712ce70f ("media: iris: implement vb2 streaming ops")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93fad55aa9 upstream.
Add the missing write to AON_WRAPPER_MVP_NOC_LPI_CONTROL before
reading the LPI status register. Introduce a handshake loop to ensure
MNoC enters low power mode reliably during VPU3 hardware power-off with
timeout handling.
Fixes: 02083a1e00 ("media: platform: qcom/iris: add support for vpu33")
Cc: stable@vger.kernel.org
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57429b0fdd upstream.
When we succeed loading the firmware, we don't want to hold on to the
firmware pointer anymore, since it won't be freed anywhere else. The same
applies for the mapped memory. Unmapping the memory is particularly
important since the memory will be protected after the Iris firmware is
started, so we need to make sure there will be no accidental access to this
region (even if just a speculative one from the CPU).
Almost the same firmware loading code also exists in venus/firmware.c,
there it is implemented correctly.
Fix this by dropping the early "return ret" and move the call of
qcom_scm_pas_auth_and_reset() out of iris_load_fw_to_memory(). We should
unmap the memory before bringing the firmware out of reset.
Cc: stable@vger.kernel.org
Fixes: d19b163356 ("media: iris: implement video firmware load/unload")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fbb823a07 upstream.
Driver implements different callbacks for the power off controller
(.power_off_controller):
- iris_vpu_power_off_controller,
- iris_vpu33_power_off_controller,
The generic wrapper for handling power off - iris_vpu_power_off() -
calls them via 'iris_platform_data->vpu_ops', so shall the cleanup code
in iris_vpu_power_on().
This makes also sense if looking at caller of iris_vpu_power_on(), which
unwinds also with the wrapper calling respective platfortm code (unwinds
with iris_vpu_power_off()).
Otherwise power off sequence on the newer VPU3.3 in error path is not
complete.
Fixes: c69df5de4a ("media: platform: qcom/iris: add power_off_controller to vpu_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a082e4b4d0 upstream.
When v3 NLM request finds a conflicting delegation, it triggers
a delegation recall and nfsd_open fails with EAGAIN. nfsd_open
then translates EAGAIN into nfserr_jukebox. In nlm_fopen, instead
of returning nlm_failed for when there is a conflicting delegation,
drop this NLM request so that the client retries. Once delegation
is recalled and if a local lock is claimed, a retry would lead to
nfsd returning a nlm_lck_blocked error or a successful nlm lock.
Fixes: d343fce148 ("[PATCH] knfsd: Allow lockd to drop replies as appropriate")
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab1c282c01 upstream.
Commit 5304877936 ("NFSD: Fix strncpy() fortify warning") replaced
strncpy(,, sizeof(..)) with strlcpy(,, sizeof(..) - 1), but strlcpy()
already guaranteed NUL-termination of the destination buffer and
subtracting one byte potentially truncated the source string.
The incorrect size was then carried over in commit 72f78ae00a ("NFSD:
move from strlcpy with unused retval to strscpy") when switching from
strlcpy() to strscpy().
Fix this off-by-one error by using the full size of the destination
buffer again.
Cc: stable@vger.kernel.org
Fixes: 5304877936 ("NFSD: Fix strncpy() fortify warning")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4f574ca9c upstream.
A while back I had reported that an NFSv3 client could successfully
mount using '-o xprtsec=none' an export that had been exported with
'xprtsec=tls:mtls'. By "successfully" I mean that the mount command
would succeed and the mount would show up in /proc/mount. Attempting
to do anything futher with the mount would be met with NFS3ERR_ACCES.
This was fixed (albeit accidentally) by commit bb4f07f240 ("nfsd:
Fix NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT") and was
subsequently re-broken by commit 0813c5f012 ("nfsd: fix access
checking for NLM under XPRTSEC policies").
Transport Layer Security isn't an RPC security flavor or pseudo-flavor,
so we shouldn't be conflating them when determining whether the access
checks can be bypassed. Split check_nfsd_access() into two helpers, and
have __fh_verify() call the helpers directly since __fh_verify() has
logic that allows one or both of the checks to be skipped. All other
sites will continue to call check_nfsd_access().
Link: https://lore.kernel.org/linux-nfs/ZjO3Qwf_G87yNXb2@aion/
Fixes: 9280c57743 ("NFSD: Handle new xprtsec= export option")
Cc: stable@vger.kernel.org
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e18190b7e9 upstream.
damon_lru_sort_apply_parameters() allocates a new DAMON context, stages
user-specified DAMON parameters on it, and commits to running DAMON
context at once, using damon_commit_ctx(). The code is, however, directly
updating the monitoring attributes of the running context. And the
attributes are over-written by later damon_commit_ctx() call. This means
that the monitoring attributes parameters are not really working. Fix the
wrong use of the parameter context.
Link: https://lkml.kernel.org/r/20250916031549.115326-1-sj@kernel.org
Fixes: a309694364 ("mm/damon/lru_sort: use damon_commit_ctx()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: <stable@vger.kernel.org> [6.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b93af2cc8e upstream.
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem.
Link: https://lkml.kernel.org/r/20250930004410.55228-1-sj@kernel.org
Fixes: 7780d04046 ("mm/pagewalkers: ACTION_AGAIN if pte_offset_map_lock() fails")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Xinyu Zheng <zhengxinyu6@huawei.com>
Closes: https://lore.kernel.org/20250918030029.2652607-1-zhengxinyu6@huawei.com
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b322e88b3d upstream.
Optimize hugetlb_pages_alloc_boot() to return immediately when
max_huge_pages is 0, avoiding unnecessary CPU cycles and the below log
message when hugepages aren't configured in the kernel command line.
[ 3.702280] HugeTLB: allocation took 0ms with hugepage_allocation_threads=32
Link: https://lkml.kernel.org/r/20250814102333.4428-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Tested-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a204d4b14 upstream.
Commit 524c48072e ("mm/page_alloc: rename ALLOC_HIGH to
ALLOC_MIN_RESERVE") is the start of a series that explains how __GFP_HIGH,
which implies ALLOC_MIN_RESERVE, is going to be used instead of
__GFP_ATOMIC for high atomic reserves.
Commit eb2e2b425c ("mm/page_alloc: explicitly record high-order atomic
allocations in alloc_flags") introduced ALLOC_HIGHATOMIC for such
allocations of order higher than 0. It still used __GFP_ATOMIC, though.
Then, commit 1ebbb21811 ("mm/page_alloc: explicitly define how
__GFP_HIGH non-blocking allocations accesses reserves") just turned that
check for !__GFP_DIRECT_RECLAIM, ignoring that high atomic reserves were
expected to test for __GFP_HIGH.
This leads to high atomic reserves being added for high-order GFP_NOWAIT
allocations and others that clear __GFP_DIRECT_RECLAIM, which is
unexpected. Later, those reserves lead to 0-order allocations going to
the slow path and starting reclaim.
From /proc/pagetypeinfo, without the patch:
Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA32, type HighAtomic 1 8 10 9 7 3 0 0 0 0 0
Node 0, zone Normal, type HighAtomic 64 20 12 5 0 0 0 0 0 0 0
With the patch:
Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Link: https://lkml.kernel.org/r/20250814172245.1259625-1-cascardo@igalia.com
Fixes: 1ebbb21811 ("mm/page_alloc: explicitly define how __GFP_HIGH non-blocking allocations accesses reserves")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Tested-by: Helen Koike <koike@igalia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9658d698a8 upstream.
When splitting an mTHP and replacing a zero-filled subpage with the shared
zeropage, try_to_map_unused_to_zeropage() currently drops several
important PTE bits.
For userspace tools like CRIU, which rely on the soft-dirty mechanism for
incremental snapshots, losing the soft-dirty bit means modified pages are
missed, leading to inconsistent memory state after restore.
As pointed out by David, the more critical uffd-wp bit is also dropped.
This breaks the userfaultfd write-protection mechanism, causing writes to
be silently missed by monitoring applications, which can lead to data
corruption.
Preserve both the soft-dirty and uffd-wp bits from the old PTE when
creating the new zeropage mapping to ensure they are correctly tracked.
Link: https://lkml.kernel.org/r/20250930081040.80926-1-lance.yang@linux.dev
Fixes: b1f202060a ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ce6473d17 upstream.
When both THP and MTE are enabled, splitting a THP and replacing its
zero-filled subpages with the shared zeropage can cause MTE tag mismatch
faults in userspace.
Remapping zero-filled subpages to the shared zeropage is unsafe, as the
zeropage has a fixed tag of zero, which may not match the tag expected by
the userspace pointer.
KSM already avoids this problem by using memcmp_pages(), which on arm64
intentionally reports MTE-tagged pages as non-identical to prevent unsafe
merging.
As suggested by David[1], this patch adopts the same pattern, replacing the
memchr_inv() byte-level check with a call to pages_identical(). This
leverages existing architecture-specific logic to determine if a page is
truly identical to the shared zeropage.
Having both the THP shrinker and KSM rely on pages_identical() makes the
design more future-proof, IMO. Instead of handling quirks in generic code,
we just let the architecture decide what makes two pages identical.
[1] https://lore.kernel.org/all/ca2106a3-4bb2-4457-81af-301fd99fbef4@redhat.com
Link: https://lkml.kernel.org/r/20250922021458.68123-1-lance.yang@linux.dev
Fixes: b1f202060a ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Reported-by: Qun-wei Lin <Qun-wei.Lin@mediatek.com>
Closes: https://lore.kernel.org/all/a7944523fcc3634607691c35311a5d59d1a3f8d4.camel@mediatek.com
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: andrew.yang <andrew.yang@mediatek.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c24248ed78 upstream.
The value of skb_data->wait indicates whether skb is passed on to the
core mac80211 stack or released by the driver itself. Make sure that by
the time skb is added to txwd queue and becomes visible to the completing
side, it has already allocated and initialized TX wait related data (in
case it's needed).
This is found by code review and addresses a possible race scenario
described below:
Waiting thread Completing thread
rtw89_core_send_nullfunc()
rtw89_core_tx_write_link()
...
rtw89_pci_txwd_submit()
skb_data->wait = NULL
/* add skb to the queue */
skb_queue_tail(&txwd->queue, skb)
/* another thread (e.g. rtw89_ops_tx) performs TX kick off for the same queue */
rtw89_pci_napi_poll()
...
rtw89_pci_release_txwd_skb()
/* get skb from the queue */
skb_unlink(skb, &txwd->queue)
rtw89_pci_tx_status()
rtw89_core_tx_wait_complete()
/* use incorrect skb_data->wait */
rtw89_core_tx_kick_off_and_wait()
/* assign skb_data->wait but too late */
Found by Linux Verification Center (linuxtesting.org).
Fixes: 1ae5ca6152 ("wifi: rtw89: add function to wait for completion of TX skbs")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250919210852.823912-3-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32be3ca4cf upstream.
Don't deinitialize and reinitialize the HAL helpers. The dma memory is
deallocated and there is high possibility that we'll not be able to get
the same memory allocated from dma when there is high memory pressure.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org
Cc: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://patch.msgid.link/20250722053121.1145001-1-usama.anjum@collabora.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7381b9116 upstream.
alloc_slab_obj_exts() should mark failed obj_exts vector allocations
independent on whether the vector is being allocated for a new or an
existing slab. Current implementation skips doing this for existing
slabs. Fix this by marking failed allocations unconditionally.
Fixes: 09c46563ff ("codetag: debug: introduce OBJEXTS_ALLOC_FAIL to mark failed slab_ext allocations")
Reported-by: Shakeel Butt <shakeel.butt@linux.dev>
Closes: https://lore.kernel.org/all/avhakjldsgczmq356gkwmvfilyvf7o6temvcmtt5lqd4fhp5rk@47gp2ropyixg/
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org # v6.10+
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4038016397 upstream.
When object extension vector allocation fails, we set slab->obj_exts to
OBJEXTS_ALLOC_FAIL to indicate the failure. Later, once the vector is
successfully allocated, we will use this flag to mark codetag references
stored in that vector as empty to avoid codetag warnings.
slab_obj_exts() used to retrieve the slab->obj_exts vector pointer checks
slab->obj_exts for being either NULL or a pointer with MEMCG_DATA_OBJEXTS
bit set. However it does not handle the case when slab->obj_exts equals
OBJEXTS_ALLOC_FAIL. Add the missing condition to avoid extra warning.
Fixes: 09c46563ff ("codetag: debug: introduce OBJEXTS_ALLOC_FAIL to mark failed slab_ext allocations")
Reported-by: Shakeel Butt <shakeel.butt@linux.dev>
Closes: https://lore.kernel.org/all/jftidhymri2af5u3xtcqry3cfu6aqzte3uzlznhlaylgrdztsi@5vpjnzpsemf5/
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org # v6.10+
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa7a0a53ee upstream.
If the decompressor is compiled with clang this can lead to the following
warning:
In file included from arch/s390/boot/startup.c:4:
...
In file included from ./include/linux/pgtable.h:6:
./arch/s390/include/asm/pgtable.h:2065:48: warning: passing 'unsigned long *' to parameter of type
'long *' converts between pointers to integer types with different sign [-Wpointer-sign]
2065 | value = __atomic64_or_barrier(PGSTE_PCL_BIT, ptr);
Add -Wno-pointer-sign to the decompressor compile flags, like it is also
done for the kernel. This is similar to what was done for x86 to address
the same problem [1].
[1] commit dca5203e3f ("x86/boot: Add -Wno-pointer-sign to KBUILD_CFLAGS")
Cc: stable@vger.kernel.org
Reported-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f4ed0ce48 upstream.
Currently, if CCW request creation fails with -EINVAL, the DASD driver
returns BLK_STS_IOERR to the block layer.
This can happen, for example, when a user-space application such as QEMU
passes a misaligned buffer, but the original cause of the error is
masked as a generic I/O error.
This patch changes the behavior so that -EINVAL is returned as
BLK_STS_INVAL, allowing user space to properly detect alignment issues
instead of interpreting them as I/O errors.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Cc: stable@vger.kernel.org #6.11+
Signed-off-by: Jaehoon Kim <jhkim@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 130e6de621 upstream.
The block layer validates buffer alignment using the device's
dma_alignment value. If dma_alignment is smaller than
logical_block_size(bp_block) -1, misaligned buffer incorrectly pass
validation and propagate to the lower-level driver.
This patch adjusts dma_alignment to be at least logical_block_size -1,
ensuring that misalignment buffers are properly rejected at the block
layer and do not reach the DASD driver unnecessarily.
Fixes: 2a07bb64d8 ("s390/dasd: Remove DMA alignment")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Cc: stable@vger.kernel.org #6.11+
Signed-off-by: Jaehoon Kim <jhkim@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0edc8f113 upstream.
For the __xsch() inline assembly the conversion to flag output macros is
incomplete. Only the conditional shift of the return value was added, while
the required changes to the inline assembly itself are missing.
If compiled with GCC versions before 14.2 this leads to a double shift of
the cc output operand and therefore the returned value of __xsch() is
incorrectly always zero, instead of the expected condition code.
Fixes: e200565d43 ("s390/cio/ioasm: Convert to use flag output macros")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 008385efd0 upstream.
The previous commit adds an exception for the C-flag case. The
'mptcp_join.sh' selftest is extended to validate this case.
In this subtest, there is a typical CDN deployment with a client where
MPTCP endpoints have been 'automatically' configured:
- the server set net.mptcp.allow_join_initial_addr_port=0
- the client has multiple 'subflow' endpoints, and the default limits:
not accepting ADD_ADDRs.
Without the parent patch, the client is not able to establish new
subflows using its 'subflow' endpoints. The parent commit fixes that.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-2-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 833d4313bc upstream.
When a first MPTCP connection gets successfully established after a
blackhole period, 'active_disable_times' was supposed to be reset when
this connection was done via any non-loopback interfaces.
Unfortunately, the opposite condition was checked: only reset when the
connection was established via a loopback interface. Fixing this by
simply looking at the opposite.
This is similar to what is done with TCP FastOpen, see
tcp_fastopen_active_disable_ofo_check().
This patch is a follow-up of a previous discussion linked to commit
893c49a78d ("mptcp: Use __sk_dst_get() and dst_dev_rcu() in
mptcp_active_enable()."), see [1].
Fixes: 27069e7cb3 ("mptcp: disable active MPTCP in case of blackhole")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/4209a283-8822-47bd-95b7-87e96d9b7ea3@kernel.org [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250918-net-next-mptcp-blackhole-reset-loopback-v1-1-bf5818326639@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b1ff850e0 upstream.
When servers set the C-flag in their MP_CAPABLE to tell clients not to
create subflows to the initial address and port, clients will likely not
use their other endpoints. That's because the in-kernel path-manager
uses the 'subflow' endpoints to create subflows only to the initial
address and port.
If the limits have not been modified to accept ADD_ADDR, the client
doesn't try to establish new subflows. If the limits accept ADD_ADDR,
the routing routes will be used to select the source IP.
The C-flag is typically set when the server is operating behind a legacy
Layer 4 load balancer, or using anycast IP address. Clients having their
different 'subflow' endpoints setup, don't end up creating multiple
subflows as expected, and causing some deployment issues.
A special case is then added here: when servers set the C-flag in the
MPC and directly sends an ADD_ADDR, this single ADD_ADDR is accepted.
The 'subflows' endpoints will then be used with this new remote IP and
port. This exception is only allowed when the ADD_ADDR is sent
immediately after the 3WHS, and makes the client switching to the 'fully
established' mode. After that, 'select_local_address()' will not be able
to find any subflows, because 'id_avail_bitmap' will be filled in
mptcp_pm_create_subflow_or_signal_addr(), when switching to 'fully
established' mode.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/536
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-1-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27b1fd6201 upstream.
Filter out the register forms of 0F 01 when determining whether or not to
emulate in response to a potential UMIP violation #GP, as SGDT and SIDT only
accept memory operands. The register variants of 0F 01 are used to encode
instructions for things like VMX and SGX, i.e. not checking the Mod field
would cause the kernel to incorrectly emulate on #GP, e.g. due to a CPL
violation on VMLAUNCH.
Fixes: 1e5db22369 ("x86/umip: Add emulation code for UMIP instructions")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32278c6779 upstream.
When checking for a potential UMIP violation on #GP, verify the decoder found
at least two opcode bytes to avoid false positives when the kernel encounters
an unknown instruction that starts with 0f. Because the array of opcode.bytes
is zero-initialized by insn_init(), peeking at bytes[1] will misinterpret
garbage as a potential SLDT or STR instruction, and can incorrectly trigger
emulation.
E.g. if a VPALIGNR instruction
62 83 c5 05 0f 08 ff vpalignr xmm17{k5},xmm23,XMMWORD PTR [r8],0xff
hits a #GP, the kernel emulates it as STR and squashes the #GP (and corrupts
the userspace code stream).
Arguably the check should look for exactly two bytes, but no three byte
opcodes use '0f 00 xx' or '0f 01 xx' as an escape, i.e. it should be
impossible to get a false positive if the first two opcode bytes match '0f 00'
or '0f 01'. Go with a more conservative check with respect to the existing
code to minimize the chances of breaking userspace, e.g. due to decoder
weirdness.
Analyzed by Nick Bray <ncbray@google.com>.
Fixes: 1e5db22369 ("x86/umip: Add emulation code for UMIP instructions")
Reported-by: Dan Snyder <dansnyder@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3da01ffe1a upstream.
The FRED specification has been changed in v9.0 to state that there
is no need for FRED event handlers to begin with ENDBR64, because
in the presence of supervisor indirect branch tracking, FRED event
delivery does not enter the WAIT_FOR_ENDBRANCH state.
As a result, remove ENDBR64 from FRED entry points.
Then add ANNOTATE_NOENDBR to indicate that FRED entry points will
never be used for indirect calls to suppress an objtool warning.
This change implies that any indirect CALL/JMP to FRED entry points
causes #CP in the presence of supervisor indirect branch tracking.
Credit goes to Jennifer Miller <jmill@asu.edu> and other contributors
from Arizona State University whose research shows that placing ENDBR
at entry points has negative value thus led to this change.
Note: This is obviously an incompatible change to the FRED
architecture. But, it's OK because there no FRED systems out in the
wild today. All production hardware and late pre-production hardware
will follow the FRED v9 spec and be compatible with this approach.
[ dhansen: add note to changelog about incompatibility ]
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lore.kernel.org/linux-hardening/Z60NwR4w%2F28Z7XUa@ubun/
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250716063320.1337818-1-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd32a0c0dc upstream.
When we're removing rmap records for crosslinked blocks, use deferred
intent items so that we can try to free/unmap as many of the old data
structure's blocks as we can in the same transaction as the commit.
Cc: <stable@vger.kernel.org> # v6.6
Fixes: 1c7ce115e5 ("xfs: reap large AG metadata extents when possible")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 858d4d9e0a upstream.
The 'max_cs' stores the largest chip select number. It should only
be updated when the current 'cs' is greater than existing 'max_cs'. So,
fix the condition accordingly.
Also, return failure if there are no flash device declared.
Fixes: 0f3841a5e1 ("spi: cadence-qspi: report correct number of chip-select")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-4-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ad55767e7 upstream.
cqspi_read_setup() and cqspi_write_setup() program the address width as
the last step in the setup. This is likely to be immediately followed by
a DAC region read/write. On TI K3 SoCs the DAC region is on a different
endpoint from the register region. This means that the order of the two
operations is not guaranteed, and they might be reordered at the
interconnect level. It is possible that the DAC read/write goes through
before the address width update goes through. In this situation if the
previous command used a different address width the OSPI command is sent
with the wrong number of address bytes, resulting in an invalid command
and undefined behavior.
Read back the size register to make sure the write gets flushed before
accessing the DAC region.
Fixes: 1406234105 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-3-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29e0b471cc upstream.
cqspi_indirect_read_execute() and cqspi_indirect_write_execute() first
set the enable bit on APB region and then start reading/writing to the
AHB region. On TI K3 SoCs these regions lie on different endpoints. This
means that the order of the two operations is not guaranteed, and they
might be reordered at the interconnect level.
It is possible for the AHB write to be executed before the APB write to
enable the indirect controller, causing the transaction to be invalid
and the write erroring out. Read back the APB region write before
accessing the AHB region to make sure the write got flushed and the race
condition is eliminated.
Fixes: 1406234105 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-2-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc32e9346b upstream.
Make sure to drop the reference to the pwrctrl device taken by
of_find_device_by_node() when stopping a PCI device.
Fixes: 681725afb6 ("PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # v6.13
Link: https://patch.msgid.link/20250721153609.8611-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e24bbbe078 upstream.
Make sure to drop the references to the pwrctrl OF node and device taken by
of_pci_find_child_device() and of_find_device_by_node() respectively when
scanning the bus.
Fixes: 957f40d039 ("PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # v6.15
Link: https://patch.msgid.link/20250721153609.8611-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39f9be6aba upstream.
Make sure to drop the reference to the pwrctrl device taken by
of_find_device_by_node() when registering a PCI device.
Fixes: b458ff7e81 ("PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # v6.13
Link: https://patch.msgid.link/20250721153609.8611-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42f9c66a6d upstream.
Tegra already defines all BARs except BAR0 as BAR_RESERVED. This is
sufficient for pci-epf-test to not allocate backing memory and to not call
set_bar() for those BARs. However, marking a BAR as BAR_RESERVED does not
mean that the BAR gets disabled.
The host side driver, pci_endpoint_test, simply does an ioremap for all
enabled BARs and will run tests against all enabled BARs, so it will run
tests against the BARs marked as BAR_RESERVED.
After running the BAR tests (which will write to all enabled BARs), the
inbound address translation is broken. This is because the tegra controller
exposes the ATU Port Logic Structure in BAR4, so when BAR4 is written, the
inbound address translation settings get overwritten.
To avoid this, implement the dw_pcie_ep_ops .init() callback and start off
by disabling all BARs (pci-epf-test will later enable/configure BARs that
are not defined as BAR_RESERVED).
This matches the behavior of other PCIe endpoint drivers: dra7xx, imx6,
layerscape-ep, artpec6, dw-rockchip, qcom-ep, rcar-gen4, and uniphier-ep.
With this, the PCI endpoint kselftest test case CONSECUTIVE_BAR_TEST (which
was specifically made to detect address translation issues) passes.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250922140822.519796-7-cassel@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
