[ Upstream commit fd5bed798f ]
devm_add_action_or_reset() already invokes the action on failure,
so the explicit put causes a double-put.
Fixes: 9b07cdf86a ("pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2539b92e4 ]
The of_get_parent() function returns a device_node with an incremented
reference count.
Use the __free(device_node) cleanup attribute to ensure of_node_put()
is automatically called when pnode goes out of scope, fixing a
reference leak.
Fixes: 6e9be3abb7 ("pinctrl: Add driver support for Amlogic SoCs")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c5a40f292 ]
pinconf_generic_dt_node_to_map_pinmux() is not actually a generic
function, and really belongs in the amlogic-am4 driver. There are three
reasons why.
First, and least, of the reasons is that this function behaves
differently to the other dt_node_to_map functions in a way that is not
obvious from a first glance. This difference stems for the devicetree
properties that the function is intended for use with, and how they are
typically used. The other generic dt_node_to_map functions support
platforms where the pins, groups and functions are described statically
in the driver and require a function that will produce a mapping from dt
nodes to these pre-established descriptions. No other code in the driver
is require to be executed at runtime.
pinconf_generic_dt_node_to_map_pinmux() on the other hand is intended for
use with the pinmux property, where groups and functions are determined
entirely from the devicetree. As a result, there are no statically
defined groups and functions in the driver for this function to perform
a mapping to. Other drivers that use the pinmux property (e.g. the k1)
their dt_node_to_map function creates the groups and functions as the
devicetree is parsed. Instead of that,
pinconf_generic_dt_node_to_map_pinmux() requires that the devicetree is
parsed twice, once by it and once at probe, so that the driver
dynamically creates the groups and functions before the dt_node_to_map
callback is executed. I don't believe this double parsing requirement is
how developers would expect this to work and is not necessary given
there are drivers that do not have this behaviour.
Secondly and thirdly, the function bakes in some assumptions that only
really match the amlogic platform about how the devicetree is constructed.
These, to me, are problematic for something that claims to be generic.
The other dt_node_to_map implementations accept a being called for
either a node containing pin configuration properties or a node
containing child nodes that each contain the configuration properties.
IOW, they support the following two devicetree configurations:
| cfg {
| label: group {
| pinmux = <asjhdasjhlajskd>;
| config-item1;
| };
| };
| label: cfg {
| group1 {
| pinmux = <dsjhlfka>;
| config-item2;
| };
| group2 {
| pinmux = <lsdjhaf>;
| config-item1;
| };
| };
pinconf_generic_dt_node_to_map_pinmux() only supports the latter.
The other assumption about devicetree configuration that the function
makes is that the labeled node's parent is a "function node". The amlogic
driver uses these "function nodes" to create the functions at probe
time, and pinconf_generic_dt_node_to_map_pinmux() finds the parent of
the node it is operating on's name as part of the mapping. IOW, it
requires that the devicetree look like:
| pinctrl@bla {
|
| func-foo {
| label: group-default {
| pinmuxes = <lskdf>;
| };
| };
| };
and couldn't be used if the nodes containing the pinmux and
configuration properties are children of the pinctrl node itself:
| pinctrl@bla {
|
| label: group-default {
| pinmuxes = <lskdf>;
| };
| };
These final two reasons are mainly why I believe this is not suitable as
a generic function, and should be moved into the driver that is the sole
user and originator of the "generic" function.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Stable-dep-of: a2539b92e4 ("pinctrl: meson: amlogic-a4: Fix device node reference leak in aml_dt_node_to_map_pinmux()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7b4bc094f ]
In the error path of load_module(), under the free_module label, the
code calls lockdep_free_key_range() to release lock classes associated
with the MOD_DATA, MOD_RODATA and MOD_RO_AFTER_INIT module regions, and
subsequently invokes module_deallocate().
Since commit ac3b432839 ("module: replace module_layout with
module_memory"), the module_deallocate() function calls free_mod_mem(),
which releases the lock classes as well and considers all module
regions.
Attempting to free these classes twice is unnecessary. Remove the
redundant code in load_module().
Fixes: ac3b432839 ("module: replace module_layout with module_memory")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53e977b1d5 ]
Check whether the battery supports the relevant charge threshold before
reading the value to silence these errors:
thinkpad_acpi: acpi_evalf(BCTG, dd, ...) failed: AE_NOT_FOUND
ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCTG: evaluate failed
thinkpad_acpi: acpi_evalf(BCSG, dd, ...) failed: AE_NOT_FOUND
ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCSG: evaluate failed
when reading the charge thresholds via sysfs on platforms that do not
support them such as the ThinkPad T400.
Fixes: 2801b9683f ("thinkpad_acpi: Add support for battery thresholds")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202619
Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/MI0P293MB01967B206E1CA6F337EBFB12926CA@MI0P293MB0196.ITAP293.PROD.OUTLOOK.COM
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7497b5a99 ]
According to the AHT20 datasheet (updated to V1.0 after the 2023.09
version), the initialization command for AHT20 is 0b10111110 (0xBE).
The previous sequence (0xE1) used in earlier versions is no longer
compatible with newer AHT20 sensors. Update the initialization
command to ensure the sensor is properly initialized.
While at it, use binary notation for DHT20_CMD_INIT to match the notation
used in the datasheet.
Fixes: d2abcb5cc8 ("hwmon: (aht10) Add support for compatible aht20")
Signed-off-by: Hao Yu <haoyufine@gmail.com>
Link: https://lore.kernel.org/r/20260222170332.1616-3-haoyufine@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3eaf1b6315 ]
Add support for dht20 temperature and humidity sensor from Aosong.
Modify aht10 driver to handle different init command for dht20 sensor by
adding init_cmd entry in the driver data. dht20 sensor is compatible with
aht10 hwmon driver with this change.
Tested on TI am62x SK board with dht20 sensor connected at i2c-2 port.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Link: https://lore.kernel.org/r/2025112-94320-906858@bhairav-test.ee.iitb.ac.in
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: b7497b5a99 ("hwmon: (aht10) Fix initialization commands for AHT20")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b84bb7bd91 ]
When nvme_alloc_admin_tag_set() is called during a controller reset,
a previous admin queue may still exist. Release it properly before
allocating a new one to avoid orphaning the old queue.
This fixes a regression introduced by commit 03b3bcd319 ("nvme: fix
admin request_queue lifetime").
Cc: Keith Busch <kbusch@kernel.org>
Fixes: 03b3bcd319 ("nvme: fix admin request_queue lifetime").
Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAHj4cs9wv3SdPo+N01Fw2SHBYDs9tj2M_e1-GdQOkRy=DsBB1w@mail.gmail.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 28dfe43175 upstream.
This can be called while preemption is disabled, for example by
dcn32_internal_validate_bw which is called with the FPU active.
Fixes "BUG: scheduling while atomic" messages I encounter on my Navi31
machine.
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b42dae2ebc)
Cc: stable@vger.kernel.org
[ Context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cff9a40c6 upstream.
This fixes the condition for sending the LE Set Host Feature command.
The command is sent to indicate host support for Connected Isochronous
Streams in this case. It has been observed that the system could not
initialize BIS-only capable controllers because the controllers do not
support the command.
As per Core v6.2 | Vol 4, Part E, Table 3.1 the command shall be
supported if CIS Central or CIS Peripheral is supported; otherwise,
the command is optional.
Fixes: 709788b154 ("Bluetooth: hci_core: Fix using {cis,bis}_capable for current settings")
Cc: stable@vger.kernel.org
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
[ iso_capable() => cis_capable() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14eb64db8f upstream.
The dwmac databook for v3.74a states that lpi_intr_o is a sideband
signal which should be used to ungate the application clock, and this
signal is synchronous to the receive clock. The receive clock can run
at 2.5, 25 or 125MHz depending on the media speed, and can stop under
the control of the link partner. This means that the time it takes to
clear is dependent on the negotiated media speed, and thus can be 8,
40, or 400ns after reading the LPI control and status register.
It has been observed with some aggressive link partners, this clock
can stop while lpi_intr_o is still asserted, meaning that the signal
remains asserted for an indefinite period that the local system has
no direct control over.
The LPI interrupts will still be signalled through the main interrupt
path in any case, and this path is not dependent on the receive clock.
This, since we do not gate the application clock, and the chances of
adding clock gating in the future are slim due to the clocks being
ill-defined, lpi_intr_o serves no useful purpose. Remove the code which
requests the interrupt, and all associated code.
Reported-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> # Renesas RZ/V2H board
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnJbt-00000007YYN-28nm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 916727cfdb ]
Some systems have much larger amounts of enumeration attributes
than have been previously encountered. This can lead to page allocation
failures when using kcalloc(). Switch over to using kvcalloc() to
allow larger allocations.
Fixes: 6b2770bfd6 ("platform/x86: hp-bioscfg: enum-attributes")
Cc: stable@vger.kernel.org
Reported-by: Paul Kerry <p.kerry@sheffield.ac.uk>
Tested-by: Paul Kerry <p.kerry@sheffield.ac.uk>
Closes: https://bugs.debian.org/1127612
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260225210646.59381-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[ kcalloc() => kvcalloc() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a09dc10d13 ]
There are two places where ksmbd_vfs_kern_path_end_removing() needs to be
called in order to balance what the corresponding successful call to
ksmbd_vfs_kern_path_start_removing() has done, i.e. drop inode locks and
put the taken references. Otherwise there might be potential deadlocks
and unbalanced locks which are caught like:
BUG: workqueue leaked lock or atomic: kworker/5:21/0x00000000/7596
last function: handle_ksmbd_work
2 locks held by kworker/5:21/7596:
#0: ffff8881051ae448 (sb_writers#3){.+.+}-{0:0}, at: ksmbd_vfs_kern_path_locked+0x142/0x660
#1: ffff888130e966c0 (&type->i_mutex_dir_key#3/1){+.+.}-{4:4}, at: ksmbd_vfs_kern_path_locked+0x17d/0x660
CPU: 5 PID: 7596 Comm: kworker/5:21 Not tainted 6.1.162-00456-gc29b353f383b #138
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x5b
process_one_work.cold+0x57/0x5c
worker_thread+0x82/0x600
kthread+0x153/0x190
ret_from_fork+0x22/0x30
</TASK>
Found by Linux Verification Center (linuxtesting.org).
Fixes: d5fc1400a3 ("smb/server: avoid deadlock when linking with ReplaceIfExists")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ ksmbd_vfs_kern_path_end_removing() -> ksmbd_vfs_kern_path_unlock() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 594c11d0e1 upstream.
The analysis from Breno:
When the SMI sender returns an error, smi_work() delivers an error
response but then jumps back to restart without cleaning up properly:
1. intf->curr_msg is not cleared, so no new message is pulled
2. newmsg still points to the message, causing sender() to be called
again with the same message
3. If sender() fails again, deliver_err_response() is called with
the same recv_msg that was already queued for delivery
This causes list_add corruption ("list_add double add") because the
recv_msg is added to the user_msgs list twice. Subsequently, the
corrupted list leads to use-after-free when the memory is freed and
reused, and eventually a NULL pointer dereference when accessing
recv_msg->done.
The buggy sequence:
sender() fails
-> deliver_err_response(recv_msg) // recv_msg queued for delivery
-> goto restart // curr_msg not cleared!
sender() fails again (same message!)
-> deliver_err_response(recv_msg) // tries to queue same recv_msg
-> LIST CORRUPTION
Fix this by freeing the message and setting it to NULL on a send error.
Also, always free the newmsg on a send error, otherwise it will leak.
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/lkml/20260127-ipmi-v1-0-ba5cc90f516f@debian.org/
Fixes: 9cf93a8fa9 ("ipmi: Allow an SMI sender to return an error")
Cc: stable@vger.kernel.org # 4.18
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08fd332eeb upstream.
This driver uses multiple regmaps, which will causes name conflicts
in debugfs like:
debugfs: '30cc0000.xcvr' already exists in 'regmap'
Fix this by adding a name for the non-core regmap configurations.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251216084931.553328-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ae28d0459 upstream.
Use dev_err_probe() to simplify the code. This also silences -517 errors.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251125101334.1596381-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 12b1681793 which is
commit 648946966a upstream.
It is causing netfilter issues, so revert it for now.
Link: https://lore.kernel.org/r/aaeEd8UqYQ33Af7_@chamomile
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8678591b47 upstream.
Commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3e ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f210913 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1777f349ff upstream.
This validates the previous commit: endpoints with both the signal and
subflow flags should always be marked as used even if it was not
possible to create new subflows due to the MPTCP PM limits.
For this test, an extra endpoint is created with both the signal and the
subflow flags, and limits are set not to create extra subflows. In this
case, an ADD_ADDR is sent, but no subflows are created. Still, the local
endpoint is marked as used, and no warning is fired when removing the
endpoint, after having sent a RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 85df533a78 ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-5-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 560edd99b5 upstream.
This validates the previous commit: RM_ADDR were sent over the first
found active subflow which could be the same as the one being removed.
It is more likely to loose this notification.
For this check, RM_ADDR are explicitly dropped when trying to send them
over the initial subflow, when removing the endpoint attached to it. If
it is dropped, the test will complain because some RM_ADDR have not been
received.
Note that only the RM_ADDR are dropped, to allow the linked subflow to
be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte
code is used. If the IPTables commands fail, that's OK, the tests will
continue to pass, but not validate this part. This can be ignored:
another subtest fully depends on such command, and will be marked as
skipped.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 8dd5efb1f9 ("mptcp: send ack for rm_addr")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-3-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c09412e58 upstream.
By default, the netem qdisc can keep up to 1000 packets under its belly
to deal with the configured rate and delay. The simult flows test-case
simulates very low speed links, to avoid problems due to slow CPUs and
the TCP stack tend to transmit at a slightly higher rate than the
(virtual) link constraints.
All the above causes a relatively large amount of packets being enqueued
in the netem qdiscs - the longer the transfer, the longer the queue -
producing increasingly high TCP RTT samples and consequently increasingly
larger receive buffer size due to DRS.
When the receive buffer size becomes considerably larger than the needed
size, the tests results can flake, i.e. because minimal inaccuracy in the
pacing rate can lead to a single subflow usage towards the end of the
connection for a considerable amount of data.
Address the issue explicitly setting netem limits suitable for the
configured link speeds and unflake all the affected tests.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 579a752464 upstream.
Syzkaller managed to find a combination of actions that was generating
this warning:
msk->pm.local_addr_used == 0
WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961
Modules linked in:
CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline]
RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline]
RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210
Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a
RSP: 0018:ffffc90001663880 EFLAGS: 00010293
RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff
R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640
R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650
FS: 00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:742
____sys_sendmsg+0x272/0x3b0 net/socket.c:2592
___sys_sendmsg+0x2de/0x320 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f66346f826d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d
RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8
R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770
</TASK>
The actions that caused that seem to be:
- Set the MPTCP subflows limit to 0
- Create an MPTCP endpoint with both the 'signal' and 'subflow' flags
- Create a new MPTCP connection from a different address: an ADD_ADDR
linked to the MPTCP endpoint will be sent ('signal' flag), but no
subflows is initiated ('subflow' flag)
- Remove the MPTCP endpoint
In this case, msk->pm.local_addr_used has been kept to 0 -- because no
subflows have been created -- but the corresponding bit in
msk->pm.id_avail_bitmap has been cleared when the ADD_ADDR has been
sent. This later causes a splat when removing the MPTCP endpoint because
msk->pm.local_addr_used has been kept to 0.
Now, if an endpoint has both the signal and subflow flags, but it is not
possible to create subflows because of the limits or the c-flag case,
then the local endpoint counter is still incremented: the endpoint is
used at the end. This avoids issues later when removing the endpoint and
calling __mark_subflow_endp_available(), which expects
msk->pm.local_addr_used to have been previously incremented if the
endpoint was marked as used according to msk->pm.id_avail_bitmap.
Note that signal_and_subflow variable is reset to false when the limits
and the c-flag case allows subflows creation. Also, local_addr_used is
only incremented for non ID0 subflows.
Fixes: 85df533a78 ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/613
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-4-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb8d0bccb2 upstream.
RM_ADDR are sent over an active subflow, the first one in the subflows
list. There is then a high chance the initial subflow is picked. With
the in-kernel PM, when an endpoint is removed, a RM_ADDR is sent, then
linked subflows are closed. This is done for each active MPTCP
connection.
MPTCP endpoints are likely removed because the attached network is no
longer available or usable. In this case, it is better to avoid sending
this RM_ADDR over the subflow that is going to be removed, but prefer
sending it over another active and non stale subflow, if any.
This modification avoids situations where the other end is not notified
when a subflow is no longer usable: typically when the endpoint linked
to the initial subflow is removed, especially on the server side.
Fixes: 8dd5efb1f9 ("mptcp: send ack for rm_addr")
Cc: stable@vger.kernel.org
Reported-by: Frank Lorenz <lorenz-frank@web.de>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/612
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-2-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ac22c8eae upstream.
This leak will cause a hang when tearing down the SCSI host. For example,
iscsid hangs with the following call trace:
[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid"
#0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4
#1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f
#2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0
#3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f
#4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b
#5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp]
#6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi]
#7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi]
#8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6
#9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef
Fixes: 8fe4ce5836 ("scsi: core: Fix a use-after-free")
Cc: stable@vger.kernel.org
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223232728.93350-1-junxiao.bi@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 048efe129a upstream.
If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst.
Reported-by: Thiago Becker <tbecker@redhat.com>
Fixes: 1cf9f2a6a5 ("smb: client: handle unlink(2) of files open by different clients")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f37dc436d upstream.
When debug logging is enabled, cifs_set_cifscreds() logs the key
payload and exposes the plaintext username and password. Remove the
debug log to avoid exposing credentials.
Fixes: 8a8798a5ff ("cifs: fetch credentials out of keyring for non-krb5 auth multiuser mounts")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9d1e319b3 upstream.
When mounting a share with 'multichannel,max_channels=n,sec=krb5i',
the client was duplicating signing key for all secondary channels,
thus making the server fail all commands sent from secondary channels
due to bad signatures.
Every channel has its own signing key, so when establishing a new
channel with krb5 auth, make sure to use the new session key as the
derived key to generate channel's signing key in SMB2_auth_kerberos().
Repro:
$ mount.cifs //srv/share /mnt -o multichannel,max_channels=4,sec=krb5i
$ sleep 5
$ umount /mnt
$ dmesg
...
CIFS: VFS: sign fail cmd 0x5 message id 0x2
CIFS: VFS: \\srv SMB signature verification returned error = -13
CIFS: VFS: sign fail cmd 0x5 message id 0x2
CIFS: VFS: \\srv SMB signature verification returned error = -13
CIFS: VFS: sign fail cmd 0x4 message id 0x2
CIFS: VFS: \\srv SMB signature verification returned error = -13
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 663c28469d upstream.
cifs_pick_channel uses (start % chan_count) when channels are equally
loaded, but that can return a channel that failed the eligibility
checks.
Drop the fallback and return the scan-selected channel instead. If none
is eligible, keep the existing behavior of using the primary channel.
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Acked-by: Meetakshi Setiya <msetiya@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cddfa648f1 upstream.
The function try_lookup_noperm() can return an error pointer and is not
checked for one.
Add checks for error pointer in xrep_adoption_check_dcache() and
xrep_adoption_zap_dcache().
Detected by Smatch:
fs/xfs/scrub/orphanage.c:449 xrep_adoption_check_dcache() error:
'd_child' dereferencing possible ERR_PTR()
fs/xfs/scrub/orphanage.c:485 xrep_adoption_zap_dcache() error:
'd_child' dereferencing possible ERR_PTR()
Fixes: 73597e3e42 ("xfs: ensure dentry consistency when the orphanage adopts a file")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb8550fb75 upstream.
Chris Mason reports that his AI tools noticed that we were using
xfs_perag_put and xfs_group_put to release the group reference returned
by xfs_group_next_range. However, the iterator function returns an
object with an active refcount, which means that we must use the correct
function to release the active refcount, which is _rele.
Cc: <stable@vger.kernel.org> # v6.0
Fixes: 6f643c57d5 ("xfs: implement ->notify_failure() for XFS")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d195d3b20 upstream.
In drbd_request_endio(), READ_COMPLETED_WITH_ERROR is passed to
__req_mod() with a NULL peer_device:
__req_mod(req, what, NULL, &m);
The READ_COMPLETED_WITH_ERROR handler then unconditionally passes this
NULL peer_device to drbd_set_out_of_sync(), which dereferences it,
causing a null-pointer dereference.
Fix this by obtaining the peer_device via first_peer_device(device),
matching how drbd_req_destroy() handles the same situation.
Cc: stable@vger.kernel.org
Reported-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/linux-block/20260104165355.151864-1-islituo@gmail.com
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab140365fb upstream.
Even though we check that we "should" be able to do lc_get_cumulative()
while holding the device->al_lock spinlock, it may still fail,
if some other code path decided to do lc_try_lock() with bad timing.
If that happened, we logged "LOGIC BUG for enr=...",
but still did not return an error.
The rest of the code now assumed that this request has references
for the relevant activity log extents.
The implcations are that during an active resync, mutual exclusivity of
resync versus application IO is not guaranteed. And a potential crash
at this point may not realizs that these extents could have been target
of in-flight IO and would need to be resynced just in case.
Also, once the request completes, it will give up activity log references it
does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put().
Fix:
Do not crash the kernel for a condition that is harmless during normal
operation: also catch "e->refcnt == 0", not only "e == NULL"
when being noisy about "al_complete_io() called on inactive extent %u\n".
And do not try to be smart and "guess" whether something will work, then
be surprised when it does not.
Deal with the fact that it may or may not work. If it does not, remember a
possible "partially in activity log" state (only possible for requests that
cross extent boundaries), and return an error code from
drbd_al_begin_io_nonblock().
A latter call for the same request will then resume from where we left off.
Cc: stable@vger.kernel.org
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdb24a820a upstream.
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases.
Link: https://lkml.kernel.org/r/20260217050955.138351-1-phillip@squashfs.org.uk
Fixes: f400e12656 ("Squashfs: cache operations")
Reported-by: syzbot+a9747fe1c35a5b115d3f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/699234e2.a70a0220.2c38d7.00e2.GAE@google.com/
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd085fe9a8 upstream.
file_thp_enabled() incorrectly allows THP for files on anonymous inodes
(e.g. guest_memfd and secretmem). These files are created via
alloc_file_pseudo(), which does not call get_write_access() and leaves
inode->i_writecount at 0. Combined with S_ISREG(inode->i_mode) being
true, they appear as read-only regular files when
CONFIG_READ_ONLY_THP_FOR_FS is enabled, making them eligible for THP
collapse.
Anonymous inodes can never pass the inode_is_open_for_write() check
since their i_writecount is never incremented through the normal VFS
open path. The right thing to do is to exclude them from THP eligibility
altogether, since CONFIG_READ_ONLY_THP_FOR_FS was designed for real
filesystem files (e.g. shared libraries), not for pseudo-filesystem
inodes.
For guest_memfd, this allows khugepaged and MADV_COLLAPSE to create
large folios in the page cache via the collapse path, but the
guest_memfd fault handler does not support large folios. This triggers
WARN_ON_ONCE(folio_test_large(folio)) in kvm_gmem_fault_user_mapping().
For secretmem, collapse_file() tries to copy page contents through the
direct map, but secretmem pages are removed from the direct map. This
can result in a kernel crash:
BUG: unable to handle page fault for address: ffff88810284d000
RIP: 0010:memcpy_orig+0x16/0x130
Call Trace:
collapse_file
hpage_collapse_scan_file
madvise_collapse
Secretmem is not affected by the crash on upstream as the memory failure
recovery handles the failed copy gracefully, but it still triggers
confusing false memory failure reports:
Memory failure: 0x106d96f: recovery action for clean unevictable
LRU page: Recovered
Check IS_ANON_FILE(inode) in file_thp_enabled() to deny THP for all
anonymous inode files.
Link: https://syzkaller.appspot.com/bug?extid=33a04338019ac7e43a44
Link: https://lore.kernel.org/linux-mm/CAEvNRgHegcz3ro35ixkDw39ES8=U6rs6S7iP0gkR9enr7HoGtA@mail.gmail.com
Link: https://lkml.kernel.org/r/20260214001535.435626-1-kartikey406@gmail.com
Fixes: 7fbb5e1882 ("mm: remove VM_EXEC requirement for THP eligibility")
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Reported-by: syzbot+33a04338019ac7e43a44@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=33a04338019ac7e43a44
Tested-by: syzbot+33a04338019ac7e43a44@syzkaller.appspotmail.com
Tested-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Fangrui Song <i@maskray.me>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14d4ac19d1 upstream.
In flush_write_buffer, &p->frag_sem is acquired and then the loaded store
function is called, which, here, is target_core_item_dbroot_store(). This
function called filp_open(), following which these functions were called
(in reverse order), according to the call trace:
down_read
__configfs_open_file
do_dentry_open
vfs_open
do_open
path_openat
do_filp_open
file_open_name
filp_open
target_core_item_dbroot_store
flush_write_buffer
configfs_write_iter
target_core_item_dbroot_store() tries to validate the new file path by
trying to open the file path provided to it; however, in this case, the bug
report shows:
db_root: not a directory: /sys/kernel/config/target/dbroot
indicating that the same configfs file was tried to be opened, on which it
is currently working on. Thus, it is trying to acquire frag_sem semaphore
of the same file of which it already holds the semaphore obtained in
flush_write_buffer(), leading to acquiring the semaphore in a nested manner
and a possibility of recursive locking.
Fix this by modifying target_core_item_dbroot_store() to use kern_path()
instead of filp_open() to avoid opening the file using filesystem-specific
function __configfs_open_file(), and further modifying it to make this fix
compatible.
Reported-by: syzbot+f6e8174215573a84b797@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f6e8174215573a84b797
Tested-by: syzbot+f6e8174215573a84b797@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20260216062002.61937-1-activprithvi@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e39bb9e02b upstream.
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://patch.msgid.link/20260227025842.1085206-1-wangqing7171@gmail.com
Fixes: cf9f0f7c4c ("tracing: Allow user-space mapping of the ring-buffer")
Reported-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b5dd2030fe08afdf65d
Tested-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cb968a201 upstream.
syzbot reported memory leak of struct cred. [0]
nfsd_nl_threads_set_doit() passes get_current_cred() to
nfsd_svc(), but put_cred() is not called after that.
The cred is finally passed down to _svc_xprt_create(),
which calls get_cred() with the cred for struct svc_xprt.
The ownership of the refcount by get_current_cred() is not
transferred to anywhere and is just leaked.
nfsd_svc() is also called from write_threads(), but it does
not bump file->f_cred there.
nfsd_nl_threads_set_doit() is called from sendmsg() and
current->cred does not go away.
Let's use current_cred() in nfsd_nl_threads_set_doit().
[0]:
BUG: memory leak
unreferenced object 0xffff888108b89480 (size 184):
comm "syz-executor", pid 5994, jiffies 4294943386
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 369454a7):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x412/0x580 mm/slub.c:5270
prepare_creds+0x22/0x600 kernel/cred.c:185
copy_creds+0x44/0x290 kernel/cred.c:286
copy_process+0x7a7/0x2870 kernel/fork.c:2086
kernel_clone+0xac/0x6e0 kernel/fork.c:2651
__do_sys_clone+0x7f/0xb0 kernel/fork.c:2792
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 924f4fb003 ("NFSD: convert write_threads to netlink command")
Cc: stable@vger.kernel.org
Reported-by: syzbot+dd3b43aa0204089217ee@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69744674.a00a0220.33ccc7.0000.GAE@google.com/
Tested-by: syzbot+dd3b43aa0204089217ee@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b050482ec upstream.
When the system is booted with kernel command line argument "nosmt" or
"maxcpus" to limit the number of CPUs, disabling turbo via:
echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in a crash:
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
...
RIP: 0010:store_no_turbo+0x100/0x1f0
...
This occurs because for_each_possible_cpu() returns CPUs even if they
are not online. For those CPUs, all_cpu_data[] will be NULL. Since
commit 973207ae3d ("cpufreq: intel_pstate: Rearrange max frequency
updates handling code"), all_cpu_data[] is dereferenced even for CPUs
which are not online, causing the NULL pointer dereference.
To fix that, pass CPU number to intel_pstate_update_max_freq() and use
all_cpu_data[] for those CPUs for which there is a valid cpufreq policy.
Fixes: 973207ae3d ("cpufreq: intel_pstate: Rearrange max frequency updates handling code")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221068
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/20260225001752.890164-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faa72102b1 upstream.
struct ionic_cq_resp resp {
__u32 cqid[2]; // offset 0 - PARTIALLY SET (see below)
__u8 udma_mask; // offset 8 - SET (resp.udma_mask = vcq->udma_mask)
__u8 rsvd[7]; // offset 9 - NEVER SET <- LEAK
};
rsvd[7]: 7 bytes of stack memory leaked unconditionally.
cqid[2]: The loop at line 1256 iterates over udma_idx but skips indices
where !(vcq->udma_mask & BIT(udma_idx)). The array has 2 entries but
udma_count could be 1, meaning cqid[1] might never be written via
ionic_create_cq_common(). If udma_mask only has bit 0 set, cqid[1] (4
bytes) is also leaked. So potentially 11 bytes leaked.
Cc: stable@vger.kernel.org
Fixes: e8521822c7 ("RDMA/ionic: Register device ops for control path")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/4-v1-83e918d69e73+a9-rdma_udata_rc_jgg@nvidia.com
Acked-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74586c6da9 upstream.
struct irdma_create_ah_resp { // 8 bytes, no padding
__u32 ah_id; // offset 0 - SET (uresp.ah_id = ah->sc_ah.ah_info.ah_idx)
__u8 rsvd[4]; // offset 4 - NEVER SET <- LEAK
};
rsvd[4]: 4 bytes of stack memory leaked unconditionally. Only ah_id is assigned before ib_respond_udata().
The reserved members of the structure were not zeroed.
Cc: stable@vger.kernel.org
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/3-v1-83e918d69e73+a9-rdma_udata_rc_jgg@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8dbdc6e38 upstream.
There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and
LED_TRIGGER_PHY are enabled:
[ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock);
[ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234
[ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c
[ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c
[ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0
[ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0
[ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c
[ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78
[ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock();
[ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0
[ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c
[ 1362.104022] [<80014504>] syscall_common+0x34/0x58
Here LED_TRIGGER_PHY is registering LED triggers during phy_attach
while holding RTNL and then taking triggers_list_lock.
[ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock();
[ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4
[ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock);
[ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c
[ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc
[ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c
[ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4
[ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c
[ 1362.232164] [<80014504>] syscall_common+0x34/0x58
Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes
triggers_list_lock and then RTNL. A classical AB-BA deadlock.
phy_led_triggers_registers() does not require the RTNL, it does not
make any calls into the network stack which require protection. There
is also no requirement the PHY has been attached to a MAC, the
triggers only make use of phydev state. This allows the call to
phy_led_triggers_registers() to be placed elsewhere. PHY probe() and
release() don't hold RTNL, so solving the AB-BA deadlock.
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Closes: https://lore.kernel.org/all/OS7PR01MB13602B128BA1AD3FA38B6D1FFBC69A@OS7PR01MB13602.jpnprd01.prod.outlook.com/
Fixes: 06f502f57d ("leds: trigger: Introduce a NETDEV trigger")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://patch.msgid.link/20260222152601.1978655-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb868db5f4 upstream.
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers.
Cc: stable@vger.kernel.org
Fixes: a6fb8d5a8b ("gve: Tx path for DQO-QPL")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260220215324.1631350-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
