commit c00b413a96 upstream.
The 5-level paging code parses the command line to look for the 'no5lvl'
string, and does so very early, before sanitize_boot_params() has been
called and has been given the opportunity to wipe bogus data from the
fields in boot_params that are not covered by struct setup_header, and
are therefore supposed to be initialized to zero by the bootloader.
This triggers an early boot crash when using syslinux-efi to boot a
recent kernel built with CONFIG_X86_5LEVEL=y and CONFIG_EFI_STUB=n, as
the 0xff padding that now fills the unused PE/COFF header is copied into
boot_params by the bootloader, and interpreted as the top half of the
command line pointer.
Fix this by sanitizing the boot_params before use. Note that there is no
harm in calling this more than once; subsequent invocations are able to
spot that the boot_params have already been cleaned up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org> # v6.1+
Link: https://lore.kernel.org/r/20250306155915.342465-2-ardb+git@google.com
Closes: https://lore.kernel.org/all/202503041549.35913.ulrich.gemkow@ikr.uni-stuttgart.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0d10eaedc upstream.
Based on the dmesg messages from the original reporter:
[ 4.964073] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
[ 4.964083] thinkpad_acpi: Error probing battery 2
Lenovo ThinkPad X131e also needs this battery quirk.
Reported-by: Fan Yang <804284660@qq.com>
Tested-by: Fan Yang <804284660@qq.com>
Co-developed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250221164825.77315-1-jeffbai@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a7565ee6e upstream.
This reverts commit a5c6bc5900.
The general approach described in commit e076eaca59 ("selftests: break
the dependency upon local header files") was taken one step too far here:
it should not have been extended to include the syscall numbers. This is
because doing so would require per-arch support in tools/include/uapi, and
no such support exists.
This revert fixes two separate reports of test failures, from Dave
Hansen[1], and Li Wang[2]. An excerpt of Dave's report:
Before this commit (a5c6bc5900) things are
fine. But after, I get:
running PKEY tests for unsupported CPU/OS
An excerpt of Li's report:
I just found that mlock2_() return a wrong value in mlock2-test
[1] https://lore.kernel.org/dc585017-6740-4cab-a536-b12b37a7582d@intel.com
[2] https://lore.kernel.org/CAEemH2eW=UMu9+turT2jRie7+6ewUazXmA6kL+VBo3cGDGU6RA@mail.gmail.com
Link: https://lkml.kernel.org/r/20250214033850.235171-1-jhubbard@nvidia.com
Fixes: a5c6bc5900 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Li Wang <liwang@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eae116d1f0 upstream.
Commit 96a5c186ef ("mm/page_alloc.c: don't show protection in zone's
->lowmem_reserve[] for empty zone") removes the protection of lower zones
from allocations targeting memory-less high zones. This had an unintended
impact on the pattern of reclaims because it makes the high-zone-targeted
allocation more likely to succeed in lower zones, which adds pressure to
said zones. I.e, the following corresponding checks in
zone_watermark_ok/zone_watermark_fast are less likely to trigger:
if (free_pages <= min + z->lowmem_reserve[highest_zoneidx])
return false;
As a result, we are observing an increase in reclaim and kswapd scans, due
to the increased pressure. This was initially observed as increased
latency in filesystem operations when benchmarking with fio on a machine
with some memory-less zones, but it has since been associated with
increased contention in locks related to memory reclaim. By reverting
this patch, the original performance was recovered on that machine.
The original commit was introduced as a clarification of the
/proc/zoneinfo output, so it doesn't seem there are usecases depending on
it, making the revert a simple solution.
For reference, I collected vmstat with and without this patch on a freshly
booted system running intensive randread io from an nvme for 5 minutes. I
got:
rpm-6.12.0-slfo.1.2 -> pgscan_kswapd 5629543865
Patched -> pgscan_kswapd 33580844
33M scans is similar to what we had in kernels predating this patch.
These numbers is fairly representative of the workload on this machine, as
measured in several runs. So we are talking about a 2-order of magnitude
increase.
Link: https://lkml.kernel.org/r/20250226032258.234099-1-krisman@suse.de
Fixes: 96a5c186ef ("mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29ffeb73b2 upstream.
num_gb_pipes was set to a wrong value using r420_pipe_config
This have lead to HyperZ glitches on fast Z clearing.
Closes: https://bugs.freedesktop.org/show_bug.cgi?id=110897
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Richard Thier <u9vata@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 044e59a85c)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68c3de7f70 upstream.
Ensure job done fences are only initialised once.
This fixes a memory manager not clean warning from drm_mm_takedown
on module unload.
Cc: stable@vger.kernel.org
Fixes: eaf01ee5ba ("drm/imagination: Implement job submission and scheduling")
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226-init-done-fences-once-v2-1-c1b2f556b329@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5c4c3ba95 upstream.
Avoid a warning from drm_gem_gpuva_assert_lock_held in drm_gpuva_unlink.
The Imagination driver uses the GEM object reservation lock to protect
the gpuva list, but the GEM object was not always known in the code
paths that ended up calling drm_gpuva_unlink. When the GEM object isn't
known, it is found by calling drm_gpuva_find to lookup the object
associated with a given virtual address range, or by calling
drm_gpuva_find_first when removing all mappings.
Cc: stable@vger.kernel.org
Fixes: 4bc736f890 ("drm/imagination: vm: make use of GPUVM's drm_exec helper")
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226-hold-drm_gem_gpuva-lock-for-unmap-v2-1-3fdacded227f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df1a1ed5e1 upstream.
Do scheduler queue fence release processing on a workqueue, rather
than in the release function itself.
Fixes deadlock issues such as the following:
[ 607.400437] ============================================
[ 607.405755] WARNING: possible recursive locking detected
[ 607.415500] --------------------------------------------
[ 607.420817] weston:zfq0/24149 is trying to acquire lock:
[ 607.426131] ffff000017d041a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: pvr_gem_object_vunmap+0x40/0xc0 [powervr]
[ 607.436728]
but task is already holding lock:
[ 607.442554] ffff000017d105a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_ioctl+0x250/0x554
[ 607.451727]
other info that might help us debug this:
[ 607.458245] Possible unsafe locking scenario:
[ 607.464155] CPU0
[ 607.466601] ----
[ 607.469044] lock(reservation_ww_class_mutex);
[ 607.473584] lock(reservation_ww_class_mutex);
[ 607.478114]
*** DEADLOCK ***
Cc: stable@vger.kernel.org
Fixes: eaf01ee5ba ("drm/imagination: Implement job submission and scheduling")
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226-fence-release-deadlock-v2-1-6fed2fc1fe88@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da552bda98 upstream.
always allow ih interrupt from fw on smu v14 based on
the interface requirement
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3199eba46)
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd617ea3b7 upstream.
Through KFD IOCTL Fuzzing we encountered a NULL pointer derefrence
when calling kfd_queue_acquire_buffers.
Fixes: 629568d25f ("drm/amdkfd: Validate queue cwsr area and eop buffer size")
Signed-off-by: Andrew Martin <Andrew.Martin@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Andrew Martin <Andrew.Martin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 049e5bf3c8)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 374c9faac5 upstream.
Null pointer dereference issue could occur when pipe_ctx->plane_state
is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not
null before accessing. This prevents a null pointer dereference.
Found by code review.
Fixes: 3be5262e35 ("drm/amd/display: Rename more dc_surface stuff to plane_state")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 63e6a77ccf)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5797c04400 upstream.
When an Icelake or Sapphire Rapids CPU isn't providing the maximum and
critical thresholds for particular DIMM the driver should return an
error to the userspace instead of giving it stale (best case) or wrong
(the structure contains all zeros after kzalloc() call) data.
The issue can be reproduced by binding the peci driver while the host is
fully booted and idle, this makes PECI interaction unreliable enough.
Fixes: 73bc1b885d ("hwmon: peci: Add dimmtemp driver")
Fixes: 621995b6d7 ("hwmon: (peci/dimmtemp) Add Sapphire Rapids support")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20250123122003.6010-1-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35d99c68af upstream.
Add btrfs_free_chunk_map() to free the memory allocated
by btrfs_alloc_chunk_map() if btrfs_add_chunk_map() fails.
Fixes: 7dc66abb5a ("btrfs: use a dedicated data structure for chunk maps")
CC: stable@vger.kernel.org
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca0dedaff9 upstream.
Add ALC222 its own depop functions for alc_init and alc_shutup.
[note: this fixes pop noise issues on the models with two headphone
jacks -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f603b15923 upstream.
Support Mic Mute LED for ThinkCentre M series.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/c211a2702f1f411e86bd7420d7eebc03@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ee5aa765c upstream.
Dell XPS 13 7390 with the Realtek ALC3271 codec experiences
persistent humming noise when the power_save mode is enabled.
This issue occurs when the codec enters power saving mode,
leading to unwanted noise from the speakers.
This patch adds the affected model (PCI ID 0x1028:0x0962) to the
power_save denylist to ensure power_save is disabled by default,
preventing power-off related noise issues.
Steps to Reproduce
1. Boot the system with `snd_hda_intel` loaded.
2. Verify that `power_save` mode is enabled:
```sh
cat /sys/module/snd_hda_intel/parameters/power_save
````
output: 10 (default power save timeout)
3. Wait for the power save timeout
4. Observe a persistent humming noise from the speakers
5. Disable `power_save` manually:
```sh
echo 0 | sudo tee /sys/module/snd_hda_intel/parameters/power_save
````
6. Confirm that the noise disappears immediately.
This issue has been observed on my system, and this patch
successfully eliminates the unwanted noise. If other users
experience similar issues, additional reports would be helpful.
Signed-off-by: Hoku Ishibe <me@hokuishi.be>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250224020517.51035-1-me@hokuishi.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9ce148ea7 upstream.
snd_seq_client_use_ptr() is supposed to return the snd_seq_client
object for the given client ID, and it tries to handle the module
auto-loading when no matching object is found. Although the module
handling is performed only conditionally with "!in_interrupt()", this
condition may be fragile, e.g. when the code is called from the ALSA
timer callback where the spinlock is temporarily disabled while the
irq is disabled. Then his doesn't fit well and spews the error about
sleep from invalid context, as complained recently by syzbot.
Also, in general, handling the module-loading at each time if no
matching object is found is really an overkill. It can be still
useful when performed at the top-level ioctl or proc reads, but it
shouldn't be done at event delivery at all.
For addressing the issues above, this patch disables the module
handling in snd_seq_client_use_ptr() in normal cases like event
deliveries, but allow only in limited and safe situations.
A new function client_load_and_use_ptr() is used for the cases where
the module loading can be done safely, instead.
Reported-by: syzbot+4cb9fad083898f54c517@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67c272e5.050a0220.dc10f.0159.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250301114530.8975-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12f65d1203 upstream.
Both new_device_store and delete_device_store touch module global
resources (e.g. gpio_aggregator_lock). To prevent race conditions with
module unload, a reference needs to be held.
Add try_module_get() in these handlers.
For new_device_store, this eliminates what appears to be the most dangerous
scenario: if an id is allocated from gpio_aggregator_idr but
platform_device_register has not yet been called or completed, a concurrent
module unload could fail to unregister/delete the device, leaving behind a
dangling platform device/GPIO forwarder. This can result in various issues.
The following simple reproducer demonstrates these problems:
#!/bin/bash
while :; do
# note: whether 'gpiochip0 0' exists or not does not matter.
echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device
done &
while :; do
modprobe gpio-aggregator
modprobe -r gpio-aggregator
done &
wait
Starting with the following warning, several kinds of warnings will appear
and the system may become unstable:
------------[ cut here ]------------
list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120
[...]
RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120
[...]
Call Trace:
<TASK>
? __list_del_entry_valid_or_report+0xa3/0x120
? __warn.cold+0x93/0xf2
? __list_del_entry_valid_or_report+0xa3/0x120
? report_bug+0xe6/0x170
? __irq_work_queue_local+0x39/0xe0
? handle_bug+0x58/0x90
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? __list_del_entry_valid_or_report+0xa3/0x120
gpiod_remove_lookup_table+0x22/0x60
new_device_store+0x315/0x350 [gpio_aggregator]
kernfs_fop_write_iter+0x137/0x1f0
vfs_write+0x262/0x430
ksys_write+0x60/0xd0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 828546e242 ("gpio: Add GPIO Aggregator")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250224143134.3024598-2-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e26e2d2e15 upstream.
If lock count is greater than 1, flags could be old value.
It should be checked with flags of smb_lock, not flags.
It will cause bug-on trap from locks_free_lock in error handling
routine.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84d2d1641b upstream.
If smb_lock->zero_len has value, ->llist of smb_lock is not delete and
flock is old one. It will cause use-after-free on error handling
routine.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6e13e1906 upstream.
If osidoffset, gsidoffset and dacloffset could be greater than smb_ntsd
struct size. If it is smaller, It could cause slab-out-of-bounds.
And when validating sid, It need to check it included subauth array size.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2ff19f0b7 upstream.
req->handle is allocated using ksmbd_acquire_id(&ipc_ida), based on
ida_alloc. req->handle from ksmbd_ipc_login_request and
FSCTL_PIPE_TRANSCEIVE ioctl can be same and it could lead to type confusion
between messages, resulting in access to unexpected parts of memory after
an incorrect delivery. ksmbd check type of ipc response but missing add
continue to check next ipc reponse.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ff5baa9b5 upstream.
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9a4a5574ce ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bdbb73dc8 upstream.
Physical address space is 48 bit on Loongson-3A5000 physical machine,
however it is 47 bit for VM on Loongson-3A5000 system. Size of physical
address space of VM is the same with the size of virtual user space (a
half) of physical machine.
Variable cpu_vabits represents user address space, kernel address space
is not included (user space and kernel space are both a half of total).
Here cpu_vabits, rather than cpu_vabits - 1, is to represent the size of
guest physical address space.
Also there is strict checking about page fault GPA address, inject error
if it is larger than maximum GPA address of VM.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78d7bc5a02 upstream.
On host, the HW guest CSR registers are lost after suspend and resume
operation. Since last_vcpu of boot CPU still records latest vCPU pointer
so that the guest CSR register skips to reload when boot CPU resumes and
vCPU is scheduled.
Here last_vcpu is cleared so that guest CSR registers will reload from
scheduled vCPU context after suspend and resume.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6fb1867d5a upstream.
There is a newly added macro INT_AVEC with CSR ESTAT register, which is
bit 14 used for LoongArch AVEC support. AVEC interrupt status bit 14 is
supported with macro CSR_ESTAT_IS, so here replace the hard-coded value
0x1fff with macro CSR_ESTAT_IS so that the AVEC interrupt status is also
supported by KVM.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8477bb0a8 upstream.
The current max_pfn equals to zero. In this case, it causes user cannot
get some page information through /proc filesystem such as kpagecount.
The following message is displayed by stress-ng test suite with command
"stress-ng --verbose --physpage 1 -t 1".
# stress-ng --verbose --physpage 1 -t 1
stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument)
...
After applying this patch, the kernel can pass the test.
# stress-ng --verbose --physpage 1 -t 1
stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3)
stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3)
stress-ng: debug: [1700] physpage: [1701] terminated (success)
Cc: stable@vger.kernel.org # 6.8+
Fixes: ff6c3d81f2 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9117434c8 upstream.
When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue
enabled, the idle_task's stack may different between the booting kernel
and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU
IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the
interrupt handler. But since the stack pointer is changed, the interrupt
handler cannot restore correct context.
So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it
as the default version of play_dead(), and the new arch_cpu_idle_dead()
call play_dead() directly. For hibernation, implement an arch-specific
hibernate_resume_nonboot_cpu_disable() to use the polling version (idle
instruction is replace by nop, and irq is disabled) of play_dead(), i.e.
poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack
when resuming from hibernation.
This solution is a little similar to commit 406f992e4a ("x86 /
hibernate: Use hlt_play_dead() when resuming from hibernation").
Cc: stable@vger.kernel.org
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da64a23590 upstream.
When compiling on LoongArch, there exists the following objtool warning
in arch/loongarch/kernel/machine_kexec.o:
kexec_reboot() falls through to next function crash_shutdown_secondary()
Avoid using unreachable() as it can (and will in the absence of UBSAN)
generate fall-through code. Use BUG() so we get a "break BRK_BUG" trap
(with unreachable annotation).
Cc: stable@vger.kernel.org # 6.12+
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00371a3f48 upstream.
pcim_iomap_regions() should receive the driver's name as its third
parameter, not the PCI device's name.
Define the driver name with a macro and use it at the appropriate
places, including pcim_iomap_regions().
Cc: stable@vger.kernel.org # v5.14+
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Tested-by: Henry Chen <chenx97@aosc.io>
Link: https://patch.msgid.link/20250226085208.97891-2-phasta@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0453655b6 upstream.
Commit 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on
future loaded modules") allows user to set a tprobe on non-exist
tracepoint but it does not check the tracepoint name is acceptable.
So it leads tprobe has a wrong character for events (e.g. with
subsystem prefix). In this case, the event is not shown in the
events directory.
Reject such invalid tracepoint name.
The tracepoint name must consist of alphabet or digit or '_'.
Link: https://lore.kernel.org/all/174055073461.4079315.15875502830565214255.stgit@mhiramat.tok.corp.google.com/
Fixes: 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on future loaded modules")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac965d7d88 upstream.
Fix a memory leak when a tprobe is defined with $retval. This
combination is not allowed, but the parse_symbol_and_return() does
not free the *symbol which should not be used if it returns the error.
Thus, it leaks the *symbol memory in that error path.
Link: https://lore.kernel.org/all/174055072650.4079315.3063014346697447838.stgit@mhiramat.tok.corp.google.com/
Fixes: ce51e6153f ("tracing: fprobe-event: Fix to check tracepoint event and return")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75f1f311d8 upstream.
This reverts commit 267b21d0be.
Turns out some DTs do depend on this behavior. Specifically, a
downstream Pixel 6 DT. Revert the change at least until we can decide if
the DT spec can be changed instead.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7ed2b6f4e upstream.
We were accidentally allocating a layout for the *square* of the object
size due to a variable shadowing mishap.
Fixes memory bloat and page allocation failures in drm/asahi.
Reported-by: Janne Grunau <j@jannau.net>
Fixes: 9e7bbfa182 ("rust: alloc: introduce `ArrayLayout`")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20241123-rust-fix-arraylayout-v1-1-197e64c95bd4@asahilina.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d072acda48 upstream.
Currently FFI integer types are defined in libcore. This commit creates
the `ffi` crate and asks bindgen to use that crate for FFI integer types
instead of `core::ffi`.
This commit is preparatory and no type changes are made in this commit
yet.
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240913213041.395655-4-gary@garyguo.net
[ Added `rustdoc`, `rusttest` and KUnit tests support. Rebased on top of
`rust-next` (e.g. migrated more `core::ffi` cases). Reworded crate
docs slightly and formatted. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fd6f55c04 upstream.
Currently bindgen has special logic to recognise `size_t` and `ssize_t`
and map them to Rust `usize` and `isize`. Similarly, `ptrdiff_t` is
mapped to `isize`.
However this falls short for `__kernel_size_t`, `__kernel_ssize_t` and
`__kernel_ptrdiff_t`. To ensure that they are mapped to usize/isize
rather than 32/64 integers depending on platform, blocklist them in
bindgen parameters and manually provide their definition.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20240913213041.395655-3-gary@garyguo.net
[ Formatted comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75c1fd41a6 upstream.
Without `-fno-builtin`, for functions like memcpy/memmove (and many
others), bindgen seems to be using the clang-provided prototype. This
prototype is ABI-wise compatible, but the issue is that it does not have
the same information as the source code w.r.t. typedefs.
For example, bindgen generates the following:
extern "C" {
pub fn strlen(s: *const core::ffi::c_char) -> core::ffi::c_ulong;
}
note that the return type is `c_ulong` (i.e. unsigned long), despite the
size_t-is-usize behavior (this is default, and we have not opted out
from it using --no-size_t-is-usize).
Similarly, memchr's size argument should be of type `__kernel_size_t`,
but bindgen generates `c_ulong` directly.
We want to ensure any `size_t` is translated to Rust `usize` so that we
can avoid having them be different type on 32-bit and 64-bit
architectures, and hence would require a lot of excessive type casts
when calling FFI functions.
I found that this bindgen behavior (which probably is caused by
libclang) can be disabled by `-fno-builtin`. Using the flag for compiled
code can result in less optimisation because compiler cannot assume
about their properties anymore, but this should not affect bindgen.
[ Trevor asked: "I wonder how reliable this behavior is. Maybe bindgen
could do a better job controlling this, is there an open issue?".
Gary replied: ..."apparently this is indeed the suggested approach in
https://github.com/rust-lang/rust-bindgen/issues/1770". - Miguel ]
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240913213041.395655-2-gary@garyguo.net
[ Formatted comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2c261fa86 upstream.
Previously, the rusttest target for the macros crate did not specify
the dependencies necessary to run the rustdoc tests. These tests rely on
the kernel crate, so add the dependencies.
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-2-ethan.twardy@gmail.com
[ Rebased (`alloc` is gone nowadays, sysroot handling is simpler) and
simplified (reused `rustdoc_test` rule instead of adding a new one,
no need for `rustdoc-compiler_builtins`, removed unneeded `macros`
explicit path). Made `vtable` example fail (avoiding to increase
the complexity in the `rusttest` target). Removed unstable
`-Zproc-macro-backtrace` option. Reworded accordingly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06b919e3fe upstream.
Clippy warns about a reimplementation of `RangeInclusive::contains`:
error: manual `!RangeInclusive::contains` implementation
--> drivers/gpu/drm/drm_panic_qr.rs:986:8
|
986 | if version < 1 || version > 40 {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use: `!(1..=40).contains(&version)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_range_contains
= note: `-D clippy::manual-range-contains` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::manual_range_contains)]`
Ignore this and keep the current implementation as that makes it easier
to read.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-8-witcher@wiredspace.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27aef8a52e upstream.
Clippy complains about a non-minimal boolean expression with
`nonminimal_bool`:
error: this boolean expression can be simplified
--> drivers/gpu/drm/drm_panic_qr.rs:722:9
|
722 | (x < 8 && y < 8) || (x < 8 && y >= end) || (x >= end && y < 8)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#nonminimal_bool
= note: `-D clippy::nonminimal-bool` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::nonminimal_bool)]`
help: try
|
722 | !(x >= 8 || y >= 8 && y < end) || (x >= end && y < 8)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
722 | (y >= end || y < 8) && x < 8 || (x >= end && y < 8)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While this can be useful in a lot of cases, it isn't here because the
line expresses clearly what the intention is. Simplifying the expression
means losing clarity, so opt-out of this lint for the offending line.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-7-witcher@wiredspace.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5bb698e6fc upstream.
It is common practice in Rust to indent the next line the same amount of
space as the previous one if both belong to the same list item. Clippy
checks for this with the lint `doc_lazy_continuation`.
error: doc list item without indentation
--> drivers/gpu/drm/drm_panic_qr.rs:979:5
|
979 | /// conversion to numeric segments.
| ^
|
= help: if this is supposed to be its own paragraph, add a blank line
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation
= note: `-D clippy::doc-lazy-continuation` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::doc_lazy_continuation)]`
help: indent this line
|
979 | /// conversion to numeric segments.
| ++
Indent the offending line by 2 more spaces to remove this Clippy error.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-6-witcher@wiredspace.de
[ Reworded to indent Clippy's message. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da13129a3f upstream.
Rust allows initializing fields of a struct without specifying the
attribute that is assigned if the variable has the same name. In this
instance this is done for all other attributes of the struct except for
`data`. Clippy notes the redundant field name:
error: redundant field names in struct initialization
--> drivers/gpu/drm/drm_panic_qr.rs:495:13
|
495 | data: data,
| ^^^^^^^^^^ help: replace it with: `data`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names
= note: `-D clippy::redundant-field-names` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::redundant_field_names)]`
Remove the redundant `data` in the assignment to be consistent.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-5-witcher@wiredspace.de
[ Reworded to add Clippy warning like it is done in the rest of the
series. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b6de57e0b upstream.
The function `alignment_pattern` returns a static reference to a `u8`
slice. The borrow of the returned element in `ALIGNMENT_PATTERNS` is
already a reference as defined in the array definition above so this
borrow is unnecessary and removed by the compiler. Clippy notes this in
`needless_borrow`:
error: this expression creates a reference which is immediately dereferenced by the compiler
--> drivers/gpu/drm/drm_panic_qr.rs:245:9
|
245 | &ALIGNMENT_PATTERNS[self.0 - 1]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: change this to: `ALIGNMENT_PATTERNS[self.0 - 1]`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::needless_borrow)]`
Remove the unnecessary borrow.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-3-witcher@wiredspace.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c408dd8167 upstream.
Rust's standard library's `std::iter::Iterator` trait provides a function
`find` that finds the first element that satisfies a predicate.
The function `Version::from_segments` is doing the same thing but is
implementing the same logic itself.
Clippy complains about this in the `manual_find` lint:
error: manual implementation of `Iterator::find`
--> drivers/gpu/drm/drm_panic_qr.rs:212:9
|
212 | / for v in (1..=40).map(|k| Version(k)) {
213 | | if v.max_data() * 8 >= segments.iter().map(|s| s.total_size_bits(v)).sum() {
214 | | return Some(v);
215 | | }
216 | | }
217 | | None
| |____________^ help: replace with an iterator: `(1..=40).map(|k| Version(k)).find(|&v| v.max_data() * 8 >= segments.iter().map(|s| s.total_size_bits(v)).sum())`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_find
= note: `-D clippy::manual-find` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::manual_find)]`
Use `Iterator::find` instead to make the intention clearer.
At the same time, clean up the redundant closure that Clippy warns
about too:
error: redundant closure
--> drivers/gpu/drm/drm_panic_qr.rs:212:31
|
212 | for v in (1..=40).map(|k| Version(k)) {
| ^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Version`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure
= note: `-D clippy::redundant-closure` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::redundant_closure)]`
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1123
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241019084048.22336-2-witcher@wiredspace.de
[ Reworded to mention the redundant closure cleanup too. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ce162a002 upstream.
Add maintainers entry for the Rust `alloc` module.
Currently, this includes the `Allocator` API itself, `Allocator`
implementations, such as `Kmalloc` or `Vmalloc`, as well as the kernel's
implementation of the primary memory allocation data structures, `Box`
and `Vec`.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-30-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 392e34b6bc upstream.
Now that we have our own `Allocator`, `Box` and `Vec` types we can remove
Rust's `alloc` crate and the `new_uninit` unstable feature.
Also remove `Kmalloc`'s `GlobalAlloc` implementation -- we can't remove
this in a separate patch, since the `alloc` crate requires a
`#[global_allocator]` to set, that implements `GlobalAlloc`.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-29-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb6f92cd3f upstream.
The current implementation of tests in str.rs use `format!` to format
strings for comparison, which, internally, creates a new `String`.
In order to prepare for getting rid of Rust's alloc crate, we have to
cut this dependency. Instead, implement `format!` for `CString`.
Note that for userspace tests, `Kmalloc`, which is backing `CString`'s
memory, is just a type alias to `Cmalloc`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-27-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
