In order to use ultra high speed modes (UHS) on the SD card slot, we
add matching pinctrls and fix the voltage switching for LDO5 of the
PMIC, by providing the SD_VSEL pin as GPIO to the PMIC driver.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit b21269b12e48 ("arm64: dts: imx8mm: add GPC node") the
GW7901 will hang during kernel init because it does not power the unused
GPU voltage rails on the IMX8MM. Disable pgc_gpumix to work around this.
We also disable the GPU devices that depend on the gpumix power domain
and pgc_gpu to avoid them staying in a probe deferred state forever.
Additionally as the MIPI voltage rail is also not connected on this
board we disable pgc_mipi and disp_blk_ctrl.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The default of 5ms is too low.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is needed for the 1LV Cyress WiFi module to probe correctly.
It also helps improve GNSS sensitivity.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some wifi cards need reset asserted until after the power supplies
have been enabled.
So wire up the W_DISABLE signal for the SDIO port (WIFI_REG_ON net) and
the BT_REG_ON net to use it for power sequencing.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The redpine wifi card takes some time to wake up. Wait for it.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Connect the wifi power regulator to the corresponding GPIO.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the missing description for the reset gpio to the panels DT
description.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the datasheet the VSC8531 PHY expects a reset pulse of 100 ns
and a delay of 15 ms after the reset has been deasserted. Set the matching
values in the devicetree.
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the DT node for the DISP blk-ctrl. With this in place the
display/mipi power domains are fully functional.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the DT node for the VPU blk-ctrl. With this in place the
VPU power domains are fully functional.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the documents, the i.MX8M-Mini features a GC320 and a
GCNanoUltra GPU core. Etnaviv detects them as:
etnaviv-gpu 38000000.gpu: model: GC600, revision: 4653
etnaviv-gpu 38008000.gpu: model: GC520, revision: 5341
This seems to work fine more or less without any changes to the HWDB,
which still might be needed in the future to correct some features,
etc.
[lst]: Added power domains and switched clock assignments to the
new clock defines used for the composite clocks, instead of
relying on the backwards compat defines.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that we have support for the power domain controller on the i.MX8MM
we can put the USB controllers in their respective power domains to allow
them to power down the PHY when possible.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the DT node for the GPC, including all the PGC power domains,
some of them are not fully functional yet, as they require interaction
with the blk-ctrls to properly power up/down the peripherals.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The internal Ethernet switch suffers from erratum A-050484 ("Ethernet
flow control not functional on L2 switch NPI port when XFH is used").
XFH stands for "Extraction Frame Header" - which basically means the
default "ocelot" DSA tagging protocol.
However, the switch supports one other tagging protocol - "ocelot-8021q",
and this is not subject to the erratum above. So describe the hardware
ability to pass PAUSE frames in the device tree, and let the driver
figure out whether it should use flow control on the CPU port or not,
depending on whether the "ocelot" or "ocelot-8021q" tagging protocol is
being used.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 'interrupt-map' in several Layerscape SoCs is malformed. The
'#address-cells' size of the parent interrupt controller (the GIC) is not
accounted for.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In linux both are identical, phy-mode is used more often, though. Also
for the ls1028a both phy-connection-type and phy-mode was used, one for
the enetc nodes and the other for the switch nodes. Unify them. But the
main reason for this is that the device tree files can be shared with
the u-boot ones; there the enetc driver only supports the "phy-mode"
property.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move the PHY nodes from the network controller to the dedicated MDIO
controller. According to Vladimir Oltean direct MDIO access via the PF,
that is when the PHY is put under the "mdio" subnode, is defeatured and
in fact the latest reference manual isn't mentioning it anymore.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
One of the last devices which are enabled by default are the USB
controllers. Although the pins are not multi-function pins, some boards
might not use USB at all. Apply the "disabled-by-default" style also for
the USB controllers and enable the controllers in the actual device tree
of the boards.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Recently, support for this particular Vivante GC7000 GPU was added to the
linux kernel. Add the corresponding device tree node.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move it inside the /soc subnode because it is part of the CCSR space.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move it inside the /soc subnode because it is part of the CCSR space.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add serial/uart support for NXP S32G2 based on the information provided by
NXP's CodeAurora BSP.
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Chester Lin <clin@suse.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add an initial dtsi file for generic SoC features of NXP S32G2.
Signed-off-by: Chester Lin <clin@suse.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The NXP BlueBox3 is a prototyping board for high-performance autonomous
driving systems. It contains two Linux systems, running on the
LX2160A and the other on the S32G2 SoC. This patch adds the device tree
support for the LX2160A SoC.
In terms of networking from the LX2160A's perspective, there are:
- 4 RJ45 10G ports using Aquantia copper PHYs which are attached
directly to DPAA2 ports on the LX2160A
- 3 NXP SJA1110 automotive Ethernet switches. First two are managed by
the LX2160A (each switch has a host port towards a dpmac), the third
switch is managed by the S32G2. All 3 switches are interconnected
through on-board SERDES lanes. The cascade ports between the 2
switches managed by LX2160A form a DSA link, the cascade ports between
the LX2160A and the S32G2 domain form user ports (the "to_sw3" net
device).
- 2 RJ45 1G ports using Atheros copper PHYs which are attached directly
to NXP SJA1110 switches
- 12 automotive 100base-T1 single-pair Ethernet ports routed from the
SJA1110 internal PHY ports (TJA1103)
- One SGMII SERDES lane towards an internal connector, attached to one
of the SJA1110 switch ports
On board rev A, the AR8035 RGMII PHY addresses were different than on
rev B and later. This patch introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Co-developed-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Co-developed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Co-developed-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
Co-developed-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Co-developed-by: Heinz Wrobel <Heinz.Wrobel@nxp.com>
Signed-off-by: Heinz Wrobel <Heinz.Wrobel@nxp.com>
Co-developed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
U-boot atempts to read serial alias value for ls1012a-rdb but couldn't
do so as it is not initialised and thus, FDT_ERR_NOTFOUND error is
reported while booting linux.
Loading fdt from FIT Image at a0000000 ...
Description: ls1012ardb-dtb
Type: Flat Device Tree
Data Start: 0xab111474
Data Size: 11285 Bytes = 11 KiB
Architecture: AArch64
Load Address: 0x90000000
Loading fdt from 0xab111474 to 0x90000000
Booting using the fdt blob at 0x90000000
Uncompressing Kernel Image
Loading Device Tree to 000000008fffa000, end 000000008ffffc14 ... OK
WARNING: fdt_fixup_stdout: could not read serial0 alias: FDT_ERR_NOTFOUND
NOTICE: RNG: INSTANTIATED
Starting kernel ...
Fix the above error by specifying serial value to duart.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Reorder flexspi clock-names entry to make it compliant with bindings.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
No functional changes, but the ranges should be grouped by region.
Otherwise, schema dtbs_check would report the following errors.
"/linux-imx/arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: pcie@33800000: ranges: 'oneOf' conditional failed, one must be fixed:
/linux-imx/arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: pcie@33800000: ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 0, 536346624, 0, 65536, 2181038080, 0, 402653184, 402653184, 0, 133169152]] is not of type 'boolean'
True was expected
[[2164260864, 0, 0, 536346624, 0, 65536, 2181038080, 0, 402653184, 402653184, 0, 133169152]] is not of type 'null'
[2164260864, 0, 0, 536346624, 0, 65536, 2181038080, 0, 402653184, 402653184, 0, 133169152] is too long
From schema: //linux-imx/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml"
Refer to commit 281f1f99cf ("PCI: dwc: Detect number of iATU windows").
The num-viewport is not required anymore, remove them totally.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
compatible = "arm,sp805", "arm,primecell";
The current compatible string doesn't exist at all. Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ZII Ultra board uses the same design as the EVK board supplying
PCIE_VPH with 3.3V. Add this connection to the DT to allow the PCIe
driver to enable the internal PHY regulator, as required by the
reference manual.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SD card slot on the Reform 2 uses the card detect pad routed to
the uSDHC2 module as intended. This is currently working as it is the
default mux setting for this pad, but better be explicit and add it
to the pinctrl node.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Align the name of operating-points node to dtschema to fix warnings like:
ddrc-opp-table: $nodename:0: 'ddrc-opp-table' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The conversion of the spi-imx driver to use GPIO descriptors
in commit 8cdcd8aeee ("spi: imx/fsl-lpspi: Convert to GPIO descriptors")
helped to detect the following SPI chipselect polarity mismatch on an
imx6q-sabresd for example:
[ 4.854337] m25p80@0 enforce active low on chipselect handle
Prior to the above commit, the chipselect polarity passed via cs-gpios
property was ignored and considered active-low.
The reason for such mismatch is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:
* SPI children have active low chip selects
* by default. This can be specified negatively
* by just omitting "spi-cs-high" in the
* device node, or actively by tagging on
* GPIO_ACTIVE_LOW as flag in the device
* tree. If the line is simultaneously
* tagged as active low in the device tree
* and has the "spi-cs-high" set, we get a
* conflict and the "spi-cs-high" flag will
* take precedence.
To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The conversion of the spi-imx driver to use GPIO descriptors
in commit 8cdcd8aeee ("spi: imx/fsl-lpspi: Convert to GPIO descriptors")
helped to detect the following SPI chipselect polarity mismatch on an
imx6q-sabresd for example:
[ 4.854337] m25p80@0 enforce active low on chipselect handle
Prior to the above commit, the chipselect polarity passed via cs-gpios
property was ignored and considered active-low.
The reason for such mismatch is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:
* SPI children have active low chip selects
* by default. This can be specified negatively
* by just omitting "spi-cs-high" in the
* device node, or actively by tagging on
* GPIO_ACTIVE_LOW as flag in the device
* tree. If the line is simultaneously
* tagged as active low in the device tree
* and has the "spi-cs-high" set, we get a
* conflict and the "spi-cs-high" flag will
* take precedence.
To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Add missing fields and remove some duplicate fields when printing a perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features being
automagically added to 'perf trace' syscall/tracepoint argument id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian consider
its ABI unstable.
- Add support to print a textual representation of IBS raw sample data in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script' python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYT0+hwAKCRCyPKLppCJ+
JxcPAQDO+iCKK/sF3TVN8f0T8xkFD6y8krBXPAtQHCAhVBeiqAD9F4R0VMX6nwy3
8rJnsNd2ODjywgFBO4uPy0N2fxBWjwo=
=/hH1
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Add missing fields and remove some duplicate fields when printing a
perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features
being automagically added to 'perf trace' syscall/tracepoint argument
id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian
consider its ABI unstable.
- Add support to print a textual representation of IBS raw sample data
in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script'
python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
tools headers UAPI: Sync linux/in.h copy with the kernel sources
perf tools: Add an option to build without libbfd
perf tools: Allow build-id with trailing zeros
perf tools: Fix hybrid config terms list corruption
perf tools: Factor out copy_config_terms() and free_config_terms()
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
perf tools: Ignore Documentation dependency file
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
tools include UAPI: Update linux/mount.h copy
perf beauty: Cover more flags in the move_mount syscall argument beautifier
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf report: Add support to print a textual representation of IBS raw sample data
perf report: Add tools/arch/x86/include/asm/amd-ibs.h
perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
...
- Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
original hotplug code and now causing trouble with the ARM64 cache
topology setup due to the pointless SMP function call. It's not longer
required as the hotplug callbacks are guaranteed to be invoked on the
upcoming CPU.
- Remove the deprecated and now unused CPU hotplug functions
- Rewrite the CPU hotplug API documentation
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmE+VhMTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoUZmD/9Q7XO8EgfitIh3sMO53spOv6ql1aWK
1bHZmnFZL/txdIJiEgouf7wV4YgPgadJtZcK6//V/wGhYj5dB+z6otj+LwdrjjQT
dgaXN6a27My0kvoyNCP2V3Xc9g6Q6XXAUadw+d7aWGqZvg5yAr+AdRgGmK3Ct2a1
AsNjiG1HJsBMWv6eKnweOwfE6FbQpwFH4vXlldQi59QaMIOteMUwx9f64ZNyZWSe
FNqVF2EVmLEmjMzhWSBzYqVdZBEUuEsPM2Y2UYqGAs7Wtwttoupredvplzsf2uJ/
sCrDQspdgZsiD1EnjaSogLFUSfdRFd+9KvvChhuR8FSjPMNU+cWf62SAjVlUGIpI
QI2G6S7707LPbun8KSlbqsXD2zKmZ9U+SkTdwJFpRhkket73uVYtuuR0PjSxUrxt
BaULcpjKjf2joMji7BMvY7AR5bwnbDS+NUtqZpqhaUYHCjOZrPglGeUlLqth5epw
SMP21BQq8Ys9M5/6dA3ATUYaE1vJb2ES7jn6sULVJ9e9RuupdCl3KfdGCaH9fiWg
dfcowI9ACI+ZZ4OPJVvR/nlEVnK3GREYS5w3S/Ay1kLYpAfvGH2l3idzclfHMvWT
ywB2uyRKowAT/Ig7mL7t3Y7ZOMLTzG8KxPfl8ar8Ja+oqDbEL5VOnIQXev3gxBgC
1f4K8WUVGl+xXQ==
=uAYt
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"Updates for the SMP and CPU hotplug:
- Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
original hotplug code and now causing trouble with the ARM64 cache
topology setup due to the pointless SMP function call.
It's not longer required as the hotplug callbacks are guaranteed to
be invoked on the upcoming CPU.
- Remove the deprecated and now unused CPU hotplug functions
- Rewrite the CPU hotplug API documentation"
* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: core-api/cpuhotplug: Rewrite the API section
cpu/hotplug: Remove deprecated CPU-hotplug functions.
thermal: Replace deprecated CPU-hotplug functions.
drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit it
as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
"obviously correct" when reviewing it locally :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYT4IaQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykQjwCgpMt1Tscv4Ek1iIigZTvygsgnBcgAniQH3nC7
iE5oyKRtQ3LolPGkAExd
=oC1V
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fix from Greg KH:
"Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit
it as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
'obviously correct' when reviewing it locally :)"
* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: Use init_uts_ns.name instead of macros
Nothing bug, but probably needs to go in.
-----BEGIN PGP SIGNATURE-----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=BmmZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A couple of very minor fixes for style and rate limiting.
Nothing big, but probably needs to go in"
* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
char: ipmi: use DEVICE_ATTR helper macro
ipmi: rate limit ipmi smi_event failure message
- Make sure the run-queue balance callback is invoked only on the outgoing CPU
-----BEGIN PGP SIGNATURE-----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=ExIs
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the idle timer expires in hardirq context, on PREEMPT_RT
- Make sure the run-queue balance callback is invoked only on the
outgoing CPU
* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Prevent balance_push() on remote runqueues
sched/idle: Make the idle timer expire in hard interrupt context
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock check
- Other smaller cleanups and optimizations
-----BEGIN PGP SIGNATURE-----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=3Eyw
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Fix the futex PI requeue machinery to not return to userspace in
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock
check
- Other smaller cleanups and optimizations
* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix ww_mutex deadlock check
futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
futex: Avoid redundant task lookup
futex: Clarify comment for requeue_pi_wake_futex()
futex: Prevent inconsistent state and exit race
futex: Return error code instead of assigning it without effect
locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
Pull namei updates from Al Viro:
"Clearing fallout from mkdirat in io_uring series. The fix in the
kern_path_locked() patch plus associated cleanups"
* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
putname(): IS_ERR_OR_NULL() is wrong here
namei: Standardize callers of filename_create()
namei: Standardize callers of filename_lookup()
rename __filename_parentat() to filename_parentat()
namei: Fix use after free in kern_path_locked
-----BEGIN PGP SIGNATURE-----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=Y9tc
-----END PGP SIGNATURE-----
Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smbfs updates from Steve French:
"cifs/smb3 updates:
- DFS reconnect fix
- begin creating common headers for server and client
- rename the cifs_common directory to smbfs_common to be more
consistent ie change use of the name cifs to smb (smb3 or smbfs is
more accurate, as the very old cifs dialect has long been
superseded by smb3 dialects).
In the future we can rename the fs/cifs directory to fs/smbfs.
This does not include the set of multichannel fixes nor the two
deferred close fixes (they are still being reviewed and tested)"
* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: properly invalidate cached root handle when closing it
cifs: move SMB FSCTL definitions to common code
cifs: rename cifs_common to smbfs_common
cifs: update FSCTL definitions
vduse driver supporting blk
virtio-vsock support for end of record with SEQPACKET
vdpa: mac and mq support for ifcvf and mlx5
vdpa: management netlink for ifcvf
virtio-i2c, gpio dt bindings
misc fixes, cleanups
NB: when merging this with
b542e383d8 ("eventfd: Make signal recursion protection a task bit")
from Linus' tree, replace eventfd_signal_count with
eventfd_signal_allowed, and drop the export of eventfd_wake_count from
("eventfd: Export eventfd_wake_count to modules").
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmE1+awPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpt6EIAJy0qrc62lktNA0IiIVJSLbUbTMmFj8MzkGR
8UxZdhpjWqBPJPyaOuNeksAqTGm/UAPEYx3C2c95Jhej7anFpy7dbCtIXcPHLJME
DjcJg+EDrlNCj8m0FcsHpHWsFzPMERJpyEZNxgB5WazQbv+yWhGrg2FN5DCnF0Ro
ZFYeKSVty148pQ0nHl8X0JM2XMtqit+O+LvKN2HQZ+fubh7BCzMxzkHY0QLHIzUS
UeZqd3Qm8YcbqnlX38P5D6k+NPiTEgknmxaBLkPxg6H3XxDAmaIRFb8Ldd1rsgy1
zTLGDiSGpVDIpawRnuEAzqJThV3Y5/MVJ1WD+mDYQ96tmhfp+KY=
=DBH/
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
