Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Improve a bit the Qualcomm LPASS RX macro driver and align similar parts
of code with LPASS WSA macro driver for consistency.
No external dependencies.
Set "Speaker Force Firmware Load" as the common kcontrol
for both tas27871 and tas2563 and move it into newly-created
tasdevice_snd_controls, and keep the digital gain and analog
gain in tas2781_snd_controls.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240704094939.1824-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
acpi_get_first_physical_node() can return NULL in several cases (no such
device, ACPI table error, reference count drop to 0, etc).
Existing check just emit error message, but doesn't perform return.
Then this NULL pointer is passed to devm_acpi_dev_add_driver_gpios()
where it is dereferenced.
Adjust this error handling by adding error code return.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 02527c3f23 ("ASoC: amd: add Machine driver for Jadeite platform")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://patch.msgid.link/20240703191007.8524-1-amishin@t-argos.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not unregister typec structures (typec_mux_dev and
typec_switch_desc) during removal leading to leaks. Fix this by moving
typec registering parts to separate function and using devm interface to
release them. This also makes code a bit simpler:
- Smaller probe() function with less error paths and no #ifdefs,
- No need to store typec_mux_dev and typec_switch_desc in driver state
container structure.
Cc: stable@vger.kernel.org
Fixes: 10f514bd17 ("ASoC: codecs: Add WCD939x Codec driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20240701122616.414158-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
commit c721f189e8 ("reset: Instantiate reset GPIO controller for
shared reset-gpios") check if there is no "resets" property
will fallback to "reset-gpios".
So don't need to handle "reset-gpios" separately in the driver,
the "reset-gpios" handler is duplicated with "resets" control handler,
remove it.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1720009575-11677-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to keep separate token list for dai and 'common' copier
token list when the 'common' list is actually the aif list, the
SOF_COPIER_DEEP_BUFFER_TOKENS are not applicable for buffers.
We could have separate lists for all types but it is probably simpler to
just use a single list for all types of copiers. Function specific tokens
will be only parsed by function specific code anyways.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240704085944.371450-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver's probe() has two allocations which are needed only within the
probe() itself - for devm_regmap_init_mmio().
Usage of devm interface is a bit misleading here, because these can be
freed right after each scope finishes.
This makes the code a bit more obvious and self documenting.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701-b4-qcom-audio-lpass-codec-cleanups-v3-6-6d98d4dd1ef5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver uses ARRAY_SIZE() to get number of widgets later passed to
snd_soc_dapm_new_controls(), which is an 'unsigned int'.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701-b4-qcom-audio-lpass-codec-cleanups-v3-5-6d98d4dd1ef5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Number of widgets in array passed to snd_soc_dapm_new_controls() cannot
be negative, so make it explicit by using 'unsigned int', just like
snd_soc_add_component_controls() is doing.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701-b4-qcom-audio-lpass-codec-cleanups-v3-4-6d98d4dd1ef5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has static 'struct regmap_config', which is then customized
depending on device version. This works fine, because there should not
be two devices in a system simultaneously and even less likely that such
two devices would have different versions, thus different regmap config.
However code is cleaner and more obvious when static data in the driver
is also const - it serves as a template.
Mark the 'struct regmap_config' as const and duplicate it in the probe()
with kmemdup to allow customizing per detected device variant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701-b4-qcom-audio-lpass-codec-cleanups-v3-3-6d98d4dd1ef5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch the driver to use GPIO descriptors.
Notice that we let the gpiolib handle line inversion for the
active low reset line (nreset !reset).
There are no upstream device trees using the tas5086 compatible
string, if there were, we would need to ascertain that they all
set the GPIO_ACTIVE_LOW flag on their GPIO lines.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240701-asoc-tas-gpios-v1-1-d69ec5d79939@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These two commits set the upper limit of the Speaker Volume control
to +12dB instead of +100dB.
This should have been a simple 1-line change to the #define in the
header file, but only the HDA cs35l56 driver is using this define.
The ASoC cs35l56 driver was using hardcoded numbers instead of the
header defines.
So the first commit changes the ASoC driver to use the #defined
constants. The second commit corrects the value of the constant.
In the current flow all interrupts are disabled in runtime suspend
phase. However interrupts enablement only exists in fsl_xcvr_prepare().
After resume fsl_xcvr_prepare() may not be called so it will cause all
interrupts still disabled even if resume from suspend. Interrupts
should be explictily enabled after resume.
Also, DPATH reset setting only exists in fsl_xcvr_prepare(). After
resume from suspend DPATH should be reset otherwise there'll be channel
swap issue.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20240628094354.780720-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change CS35L56_MAIN_RENDER_USER_VOLUME_MAX to 48, to limit the maximum
value of the Speaker Volume control to +12dB. The minimum value is
unchanged so that the default 0dB has the same integer control value.
The original maximum of 400 (+100dB) was the largest value that can be
mathematically handled by the DSP. The actual maximum amplification is
+12dB.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240703095517.208077-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "Speaker Volume" control was being defined using four hardcoded magic
numbers. There are #defines in the cs35l56.h header for these numbers, so
change the code to use the defined constants.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240703095517.208077-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the open-coded parsing of "reg" with of_property_read_reg().
The #ifdef is also easily replaced with IS_ENABLED().
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240702215402.839673-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the open-coded parsing of "reg" with of_property_read_reg().
The #ifdef is also easily replaced with IS_ENABLED().
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240702215349.839350-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Code used to create standalone and widget controls is mostly same, with
with exception that in standalone case dynamic object needs to be
registered and control created directly.
Following patches clean up and unify kcontrol creation code in topology
code.
Convert the RT5650/RT5645 audio CODEC bindings to DT schema.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20240702120106.17100-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code used to create standalone and widget enum control is same, with
exception that in standalone case dynamic object needs to be registered
and control created directly.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-14-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code used to create standalone and widget mixer control is same, with
exception that in standalone case dynamic object needs to be registered
and control created directly.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-13-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code used to create standalone and widget bytes control is same, with
exception that in standalone case dynamic object needs to be registered
and control created directly.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-12-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_tplg_dbytes_create() missed se->dobj.index initialization, so add it
there. Additionally separate dynamic object initialization into separate
logical block code.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-9-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Widget kcontrols do not need to be managed as topology dynamic objects
with an index and a linked list. As they are always associated with a
widget which is already a topology dynamic object, thus all
addition/removals of a widget will by design manage the kcontrol.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using goto, when there is no controls, just do a loop when
there are. Overall the check seems to be a bit redundant as
num_kcontrols will only be above 0 if kcontrols are set anyway, but
let's keep it, while simplifying code.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a check to cs_dsp_coeff_write_ctrl() to abort if the control
is not writeable.
The cs_dsp code originated as an ASoC driver (wm_adsp) where all
controls were exported as ALSA controls. It relied on ALSA to
enforce the read-only permission. Now that the code has been
separated from ALSA/ASoC it must perform its own permission check.
This isn't currently causing any problems so there shouldn't be any
need to backport this. If the client of cs_dsp exposes the control as
an ALSA control, it should set permissions on that ALSA control to
protect it. The few uses of cs_dsp_coeff_write_ctrl() inside drivers
are for writable controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240702110809.16836-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use master clock "mclk" if provided through device tree.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701211631.92384-2-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would work,
but might be not user friendly in some case, for example in case of system
hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state names.
Original
> amixer set "MUX" "Input 1"
> amixer set "MUX" "Input 2"
Use mux-names
sound_mux: mux {
compatible = "simple-audio-mux";
mux-gpios = <...>;
=> state-labels = "Label_A", "Label_B";
};
> amixer set "MUX" "Label_A"
> amixer set "MUX" "Label_B"
Merge series from srinivas.kandagatla@linaro.org:
Existing way of allocating soundwire master ports on Qualcommm platforms is
dynamic, and in linear order starting from 1 to MAX_PORTS.
This will work as long as soundwire device ports are 1:1 mapped
linearly. However on most Qcom SoCs like SM8550, SM8650, x1e80100, these
are NOT mapped in that order.
The result of this is that only one speaker among the pair of speakers
is always silent, With recent changes for WSA codec to support codec
versions and along with these patches we are able to get all speakers
working on these SoCs.
