Use the more concise interrupts-extended property to fully describe the
interrupts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # G2L family and G3S
Link: https://lore.kernel.org/e9db8758d275ec63b0d6ce086ac3d0ea62966865.1728045620.git.geert+renesas@glider.be
Add SD/OE pin properties to the devicetree so that Linux can configure
the pin without relying on the OTP. This configuration is based on
inspection of the schematic (which shows the SD/OE pin permanently tied
high).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240926180903.479895-3-sean.anderson@linux.dev
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Luckily, I still had an MMC card lying around. Works fine.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240928092953.2982-8-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
For this to work, User LEDs must be disabled because they share their
pins with SD data lines.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240928092953.2982-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Do not set 'bus-width' in the SoC-include DTSI. It must be set in the
board DTS file. No regressions because MMCIF was not enabled yet for
this SoC.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240928092953.2982-7-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
R-Car Gen1 has an LBSC which has quite a different register set from the
former BSC. To match R-Car M1 with R-Car H1, rename the node to LBSC.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240926103340.16909-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
(L)BSC must have a "bus" node name [1] and no unit-address because
there is no reg-property. Fix these entries.
[1] lbsc: $nodename:0: 'lbsc' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240926103340.16909-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use the more concise interrupts-extended property to fully describe the
interrupt.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240927095414.10241-10-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use the more concise interrupts-extended property to fully describe the
interrupt.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240927095414.10241-9-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Using the inherited interrupt-parent is discouraged. Use
interrupts-extended to fully describe the interrupt.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240927095414.10241-7-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The driver does not use this property and all upstream SoCs use the same
value anyhow. Remove it and get rid of a lot of dtbs_check warnings.
Tested with a Lager (R-Car H2) board and with the soon to be added
Genmai (RZA1) MMCIF support.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240925150904.3582-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Meanwhile, bindings for the audio codec exist. Add #sound-dai-cells
property and limit max frequency accordingly.
codec@0: '#sound-dai-cells' is a required property
codec@0: spi-max-frequency: 5000000 is greater than the maximum of 526000
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240925090812.14497-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
imx: use devie name instead of genereic imx_mu_chan as interrupt name
qcom: enable sa8255p and qcs8300 ipc controllers
bcm2835: Fix timeout during suspend mode
mailbox: convert to use use of_property_match_string
mediatek: enable mt8188
spreadtrum: use devm_clk_get_enabled helpers
rockchip: fix device-id typo
-----BEGIN PGP SIGNATURE-----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=nCRH
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
