[ Upstream commit 51bc68deba ]
The clocks for dp_intf* device nodes are given in the wrong order,
causing the binding validation to fail.
Fixes: 6c2503b585 ("arm64: dts: mt8195: Add dp-intf nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240802070951.1086616-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca140a0dc0 ]
Add the missing iounmap() when clock frequency fails to get read by the
of_property_read_u32() call, or if the call to msm_timer_init() fails.
Fixes: 6e3321631a ("ARM: msm: Add DT support to msm_timer")
Signed-off-by: Ankit Agrawal <agrawal.ag.ankit@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240713095713.GA430091@bnew-VirtualBox
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b14e40f5dc ]
Driver is leaking OF node reference on memory allocation failure.
Acquire the OF node reference after memory allocation to fix this and
keep it simple.
Fixes: 5a2308da9f ("riscv: Add Canaan Kendryte K210 reset controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-2-03f6d834f8c0@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f58a88cc9 ]
Driver is leaking OF node reference on memory allocation failure.
Acquire the OF node reference after memory allocation to fix this and
keep it simple.
Fixes: aed6f3cadc ("reset: berlin: convert to a platform driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-1-03f6d834f8c0@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e49cfe364 ]
There is no "fsl,phy" property in pin controller pincfg nodes:
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: f496e67500 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4439a2e92c ]
The pm_runtime_disable() is missing in remove function, use
devm_pm_runtime_enable() to fix it. So the pm_runtime_disable() in
the probe error path can also be removed.
Fixes: a38a2233f2 ("spi: bcmbca-hsspi: Add driver for newer HSSPI controller")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://patch.msgid.link/20240826124903.3429235-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a314099b7 ]
The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.
Fixes: fae14a1cb8 ("arm64: dts: ti: Add k3-j721e-beagleboneai64")
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240801181232.55027-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f3814a7c0 ]
The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.
Fixes: f46d16cf5b ("arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes")
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240801181232.55027-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 735065e774 ]
The vendor prefix for Hardkernel ODROID-M1 is incorrectly listed as
rockchip. Use the proper hardkernel vendor prefix for this board, while
at it also drop the redundant soc prefix.
Fixes: fd35832677 ("arm64: dts: rockchip: Add Hardkernel ODROID-M1 board")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240827211825.1419820-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d355c895fa ]
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK),
sourced from the 32.768 kHz crystal oscillator or slow rc oscillator.
The previously used Monitoring domain slow clock (MD_SLCK) is sourced
from an internal RC oscillator which is most probably not precise enough
for real time clock purposes.
Fixes: 1e5f532c27 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 5f6b33f463 ("ARM: dts: sam9x60: add rtt")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com
[claudiu.beznea: removed () around the last commit description paragraph,
removed " in front of "timing domain slow clock", described that
TD_SLCK can also be sourced from slow rc oscillator]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 833948fb2b ]
The RZ/G2L(C) SoC is equipped with the GIC-600. The GICD is 64KiB +
64KiB for the MBI alias (in total 128KiB), and the GICR is 128KiB per
CPU.
Fixes: 68a4552529 ("arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45afa9eacb ]
The RZ/V2L SoC is equipped with the GIC-600. The GICD is 64KiB + 64KiB
for the MBI alias (in total 128KiB), and the GICR is 128KiB per CPU.
Fixes: 7c2b8198f4 ("arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab39547f73 ]
The RZ/G2UL SoC is equipped with the GIC-600. The GICD is 64KiB + 64KiB
for the MBI alias (in total 128KiB), and the GICR is 128KiB per CPU.
Despite the RZ/G2UL SoC being single-core, it has two instances of GICR.
Fixes: cf40c9689e ("arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 395a41a1d3 ]
If regulator_get() in of_regulator_bulk_get_all() returns an error, that
error gets overridden and -EINVAL is always passed out. This masks probe
deferral requests and likely won't work properly in all cases.
Fix this by letting of_regulator_bulk_get_all() return the original
error code.
Fixes: 27b9ecc7a9 ("regulator: Add of_regulator_bulk_get_all")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240822072047.3097740-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7781f1d120 ]
0 is incorrect error code when failed to parse and map IRQ.
Replace OF specific old API for IRQ retrieval with a generic
one to fix this issue.
Fixes: 0f245463b0 ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240814144525.2648450-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2317d018b8 ]
The speedbin eFuse reads a value 'x' from 0 to 7 and, in order to
make that compatible with opp-supported-hw, it gets post processed
as BIT(x).
Change all of the 0x30 supported-hw to 0x20 to avoid getting
duplicate OPPs for speedbin 4, and also change all of the 0x8 to
0xcf because speedbins different from 4 and 5 do support 900MHz,
950MHz, 1000MHz with the higher voltage of 850mV, 900mV, 950mV
respectively.
Fixes: f38ea593ad ("arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling")
Link: https://lore.kernel.org/r/20240725072243.173104-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d281814b8f ]
All known jackpotlte variants have 4GB of RAM, let's use it all.
RAM was set to 3GB from a mistake in the vendor provided DTS file.
Fixes: 0687401532 ("arm64: dts: exynos: Add initial device tree support for Exynos7885 SoC")
Signed-off-by: David Virag <virag.david003@gmail.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240713180607.147942-3-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f245463b0 ]
Zero and negative number is not a valid IRQ for in-kernel code and the
irq_of_parse_and_map() function returns zero on error. So this check for
valid IRQs should only accept values > 0.
Fixes: 44dab88e7c ("spi: add spi_ppc4xx driver")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240724084047.1506084-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26e197b7f9 ]
The blk_add_partition() function initially used a single if-condition
(IS_ERR(part)) to check for errors when adding a partition. This was
modified to handle the specific case of -ENXIO separately, allowing the
function to proceed without logging the error in this case. However,
this change unintentionally left a path where md_autodetect_dev()
could be called without confirming that part is a valid pointer.
This commit separates the error handling logic by splitting the
initial if-condition, improving code readability and handling specific
error scenarios explicitly. The function now distinguishes the general
error case from -ENXIO without altering the existing behavior of
md_autodetect_dev() calls.
Fixes: b72053072c (block: allow partitions on host aware zone devices)
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240911132954.5874-1-riyandhiman14@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84eacf177f ]
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When creating a new io worker, this worker should inherit the cpuset
of the cgroup.
Fixes: da64d6db3b ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-3-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0997aa5497 ]
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When changing the affinity of the io_wq thread via syscall, we must only
allow cpumasks within the limits defined by the cpuset controller of the
cgroup (if enabled).
Fixes: da64d6db3b ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-2-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73aeab3735 ]
Original state:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
After commit 0e456dba86 ("block, bfq: choose the last bfqq from merge
chain in bfq_setup_cooperator()"), if P1 issues a new IO:
Without the patch:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\------------------------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
bfqq3 will be used to handle IO from P1, this is not expected, IO
should be redirected to bfqq4;
With the patch:
-------------------------------------------
| |
Process 1 Process 2 Process 3 | Process 4
(BIC1) (BIC2) (BIC3) | (BIC4)
| | | |
\-------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
IO is redirected to bfqq4, however, procress reference of bfqq3 is still
2, while there is only P2 using it.
Fix the problem by calling bfq_merge_bfqqs() for each bfqq in the merge
chain. Also change bfqq_merge_bfqqs() to return new_bfqq to simplify
code.
Fixes: 0e456dba86 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ba0403ac6 ]
After commit 42c306ed72 ("block, bfq: don't break merge chain in
bfq_split_bfqq()"), if the current procress is the last holder of bfqq,
the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and
then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq
may in the merge chain of bfqq, hence just recored waker_bfqq is still
not safe.
Fix the problem by adding a helper bfq_waker_bfqq() to check if
bfqq->waker_bfqq is in the merge chain, and current procress is the only
holder.
Fixes: 42c306ed72 ("block, bfq: don't break merge chain in bfq_split_bfqq()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ed50b8231 ]
Fast symlink can be used if the on-disk symlink data is stored
in the same block as the on-disk inode, so we don’t need to trigger
another I/O for symlink data. However, currently fs correction could be
reported _incorrectly_ if inode xattrs are too large.
In fact, these should be valid images although they cannot be handled as
fast symlinks.
Many thanks to Colin for reporting this!
Reported-by: Colin Walters <walters@verbum.org>
Reported-by: https://honggfuzz.dev/
Link: https://lore.kernel.org/r/bb2dd430-7de0-47da-ae5b-82ab2dd4d945@app.fastmail.com
Fixes: 431339ba90 ("staging: erofs: add inode operations")
[ Note that it's a runtime misbehavior instead of a security issue. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240909031911.1174718-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80887f3167 ]
Unlike other vfs_xxxx() calls, vfs_setxattr() and vfs_removexattr() don't
take the sb_writers lock, so the caller should do it for them.
Fix cachefiles to do this.
Fixes: 9ae326a690 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Gao Xiang <xiang@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-3-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42c306ed72 ]
Consider the following scenario:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\-------------\ \-------------\ \--------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
If Process 1 issue a new IO and bfqq2 is found, and then bfq_init_rq()
decide to spilt bfqq2 by bfq_split_bfqq(). Howerver, procress reference
of bfqq2 is 1 and bfq_split_bfqq() just clear the coop flag, which will
break the merge chain.
Expected result: caller will allocate a new bfqq for BIC1
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
| | |
\-------------\ \--------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 1 3
Since the condition is only used for the last bfqq4 when the previous
bfqq2 and bfqq3 are already splited. Fix the problem by checking if
bfqq is the last one in the merge chain as well.
Fixes: 36eca89483 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e456dba86 ]
Consider the following merge chain:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
IO from Process 1 will get bfqf2 from BIC1 first, then
bfq_setup_cooperator() will found bfqq2 already merged to bfqq3 and then
handle this IO from bfqq3. However, the merge chain can be much deeper
and bfqq3 can be merged to other bfqq as well.
Fix this problem by iterating to the last bfqq in
bfq_setup_cooperator().
Fixes: 36eca89483 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9ea57c91f ]
If request timetout is handled by nbd_requeue_cmd(), normal completion
has to be stopped for avoiding to complete this requeued request, other
use-after-free can be triggered.
Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime
make sure that cmd->lock is grabbed for clearing the flag and the
requeue.
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Fixes: 2895f1831e ("nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240830034145.1827742-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9327b51c9a ]
ublk zoned takes 16 bytes in each request pdu just for handling REPORT_ZONE
operation, this way does waste memory since request pdu is allocated
statically.
Store the transient zone report data into one global xarray, and remove
it after the report zone request is completed. This way is reasonable
since report zone is run in slow code path.
Fixes: 29802d7ca3 ("ublk: enable zoned storage support")
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240812013624.587587-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99655a304e ]
Clang static checker (scan-build) warning:
net/tipc/bcast.c:305:4:
The expression is an uninitialized value. The computed value will also
be garbage [core.uninitialized.Assign]
305 | (*cong_link_cnt)++;
| ^~~~~~~~~~~~~~~~~~
tipc_rcast_xmit() will increase cong_link_cnt's value, but cong_link_cnt
is uninitialized. Although it won't really cause a problem, it's better
to fix it.
Fixes: dca4a17d24 ("tipc: fix potential hanging after b/rcast changing")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://patch.msgid.link/20240912110119.2025503-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c84b0aa28 ]
Free the skb before returning from rpl_input when skb_cow_head() fails.
Use a "drop" label and goto instructions.
Fixes: a7a29f9c36 ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240911174557.11536-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9c7ac4fe2 ]
En-Wei reported that traffic breaks if cable is unplugged for more
than 3s and then re-plugged. This was supposed to be fixed by
621735f590 ("r8169: fix rare issue with broken rx after link-down on
RTL8125"). But apparently this didn't fix the issue for everybody.
The 3s threshold rang a bell, as this is the delay after which ALDPS
kicks in. And indeed disabling ALDPS fixes the issue for this user.
Maybe this fixes the issue in general. In a follow-up step we could
remove the first fix attempt and see whether anybody complains.
Fixes: f1bce4ad2f ("r8169: add support for RTL8125")
Tested-by: En-Wei WU <en-wei.wu@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/778b9d86-05c4-4856-be59-cde4487b9e52@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 799a922599 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: bbb96dc7fa ("enetc: Factor out the traffic start/stop procedures")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-3-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c471236b23 ]
Both bareudp_xmit_skb() and bareudp6_xmit_skb() read their skb's inner
IP header to get its ECN value (with ip_tunnel_ecn_encap()). Therefore
we need to ensure that the inner IP header is part of the skb's linear
data.
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/267328222f0a11519c6de04c640a4f87a38ea9ed.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fa29c851 ]
Bareudp reads the inner IP header to get the ECN value. Therefore, it
needs to ensure that it's part of the skb's linear data.
This is similar to the vxlan and geneve fixes for that same problem:
* commit f778941913 ("vxlan: Pull inner IP header in vxlan_rcv().")
* commit 1ca1ba465e ("geneve: make sure to pull inner header in
geneve_rx()")
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/5205940067c40218a70fbb888080466b2fc288db.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b05933340 ]
Requesting transfers of the exact same size of wMaxPacketSize may result
in ZPL/short-transfer since the USB stack cannot handle it as we are
limiting the buffer size to be the same as wMaxPacketSize.
Also, in terms of throughput this change has the same effect to
interrupt endpoint as 290ba20081 "Bluetooth: Improve USB driver throughput
by increasing the frame size" had for the bulk endpoint, so users of the
advertisement bearer (e.g. BT Mesh) may benefit from this change.
Fixes: 5e23b923da ("[Bluetooth] Add generic driver for Bluetooth USB devices")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c09b50efc ]
After calling m_can_stop() an interrupt may be pending or NAPI might
still be executed. This means the driver might still touch registers
of the IP core after the clocks have been disabled. This is not good
practice and might lead to aborts depending on the SoC integration.
To avoid these potential problems, make m_can_close() symmetric to
m_can_open(), i.e. stop the clocks at the end, right before shutting
down the transceiver.
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-2-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 801ad2f87b ]
If an interrupt (RX-complete or error flag) is set when bringing up
the CAN device, e.g. due to CAN bus traffic before initializing the
device, when m_can_start() is called and interrupts are enabled,
m_can_isr() is called immediately, which disables all CAN interrupts
and calls napi_schedule().
Because napi_enable() isn't called until later in m_can_open(), the
call to napi_schedule() never schedules the m_can_poll() callback and
the device is left with interrupts disabled and can't receive any CAN
packets until rebooted.
This can be verified by running "cansend" from another device before
setting the bitrate and calling "ip link set up can0" on the test
device. Adding debug lines to m_can_isr() shows it's called with flags
(IR_EP | IR_EW | IR_CRCE), which calls m_can_disable_all_interrupts()
and napi_schedule(), and then m_can_poll() is never called.
Move the call to napi_enable() above the call to m_can_start() to
enable any initial interrupt flags to be handled by m_can_poll() so
that interrupts are reenabled. Add a call to napi_disable() in the
error handling section of m_can_open(), to handle the case where later
functions return errors.
Also, in m_can_close(), move the call to napi_disable() below the call
to m_can_stop() to ensure all interrupts are handled when bringing
down the device. This race condition is much less likely to occur.
Tested on a Microchip SAMA7G54 MPU. The fix should be applicable to
any SoC with a Bosch M_CAN controller.
Signed-off-by: Jake Hamby <Jake.Hamby@Teledyne.com>
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-1-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1339be951 ]
Several syzbot soft lockup reports all have in common sock_hash_free()
If a map with a large number of buckets is destroyed, we need to yield
the cpu when needed.
Fixes: 75e68e5bf2 ("bpf, sockhash: Synchronize delete from bucket list on map free")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240906154449.3742932-1-edumazet@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfbfeee615 ]
This ignores errors from HCI_OP_REMOTE_NAME_REQ_CANCEL since it
shouldn't interfere with the stopping of discovery and in certain
conditions it seems to be failing.
Link: https://github.com/bluez/bluez/issues/575
Fixes: d0b137062b ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d47da6bd4c ]
If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.
Fixes: b644ba3369 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d7c6ae1ef ]
In the `wilc_parse_join_bss_param` function, the TSF field of the `ies`
structure is accessed after the RCU read-side critical section is
unlocked. According to RCU usage rules, this is illegal. Reusing this
pointer can lead to unpredictable behavior, including accessing memory
that has been updated or causing use-after-free issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the TSF value is now stored in a local variable
`ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is
then assigned using this local variable, ensuring that the TSF value is
safely accessed.
Fixes: 205c50306a ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/tencent_466225AA599BA49627FB26F707EE17BC5407@qq.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d301de12d ]
Since '__dev_queue_xmit()' should be called with interrupts enabled,
the following backtrace:
ieee80211_do_stop()
...
spin_lock_irqsave(&local->queue_stop_reason_lock, flags)
...
ieee80211_free_txskb()
ieee80211_report_used_skb()
ieee80211_report_ack_skb()
cfg80211_mgmt_tx_status_ext()
nl80211_frame_tx_status()
genlmsg_multicast_netns()
genlmsg_multicast_netns_filtered()
nlmsg_multicast_filtered()
netlink_broadcast_filtered()
do_one_broadcast()
netlink_broadcast_deliver()
__netlink_sendskb()
netlink_deliver_tap()
__netlink_deliver_tap_skb()
dev_queue_xmit()
__dev_queue_xmit() ; with IRQS disabled
...
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags)
issues the warning (as reported by syzbot reproducer):
WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120
Fix this by implementing a two-phase skb reclamation in
'ieee80211_do_stop()', where actual work is performed
outside of a section with interrupts disabled.
Fixes: 5061b0c2b9 ("mac80211: cooperate more with network namespaces")
Reported-by: syzbot+1a3986bbd3169c307819@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240906123151.351647-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
