[ Upstream commit d47da6bd4c ]
If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.
Fixes: b644ba3369 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60949b7b80 ]
MASK_VAL() was added as a way to handle bit_offset and bit_width for
registers located in system memory address space. However, while suited
for reading, it does not work for writing and result in corrupted
registers when writing values with bit_offset > 0. Moreover, when a
register is collocated with another one at the same address but with a
different mask, the current code results in the other registers being
overwritten with 0s. The write procedure for SYSTEM_MEMORY registers
should actually read the value, mask it, update it and write it with the
updated value. Moreover, since registers can be located in the same
word, we must take care of locking the access before doing it. We should
potentially use a global lock since we don't know in if register
addresses aren't shared with another _CPC package but better not
encourage vendors to do so. Assume that registers can use the same word
inside a _CPC package and thus, use a per _CPC package lock.
Fixes: 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20240826101648.95654-1-cleger@rivosinc.com
[ rjw: Dropped redundant semicolon ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 29b359cf6d upstream.
The generation mask can be updated while netlink dump is in progress.
The pipapo set backend walk iterator cannot rely on it to infer what
view of the datastructure is to be used. Add notation to specify if user
wants to read/update the set.
Based on patch from Florian Westphal.
Fixes: 2b84e215f8 ("netfilter: nft_set_pipapo: .walk does not deal with generations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 45c4d994b8 ]
Accel minor management is based on DRM (and is also using struct
drm_minor internally), since DRM is using XArray for minors, it makes
sense to also convert accel.
As the two implementations are identical (only difference being the
underlying xarray), move the accel_minor_* functionality to DRM.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Acked-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-3-michal.winiarski@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 452ef7f860 ]
Add the missing masks for supported element types and Transmit
Scheduling Arbiter (TSAR) types in scheduling elements.
Also, add the corresponding bit masks for these types in the QoS
capabilities of a NIC scheduler.
Fixes: 214baf2287 ("net/mlx5e: Support HTB offload")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6513eb3d31 upstream.
The referenced commit drops bad input, but has false positives.
Tighten the check to avoid these.
The check detects illegal checksum offload requests, which produce
csum_start/csum_off beyond end of packet after segmentation.
But it is based on two incorrect assumptions:
1. virtio_net_hdr_to_skb with VIRTIO_NET_HDR_GSO_TCP[46] implies GSO.
True in callers that inject into the tx path, such as tap.
But false in callers that inject into rx, like virtio-net.
Here, the flags indicate GRO, and CHECKSUM_UNNECESSARY or
CHECKSUM_NONE without VIRTIO_NET_HDR_F_NEEDS_CSUM is normal.
2. TSO requires checksum offload, i.e., ip_summed == CHECKSUM_PARTIAL.
False, as tcp[46]_gso_segment will fix up csum_start and offset for
all other ip_summed by calling __tcp_v4_send_check.
Because of 2, we can limit the scope of the fix to virtio_net_hdr
that do try to set these fields, with a bogus value.
Link: https://lore.kernel.org/netdev/20240909094527.GA3048202@port70.net/
Fixes: 89add40066 ("net: drop bad gso csum_start and offset in virtio_net_hdr")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240910213553.839926-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33cf42e68e ]
This is required by layouts that need to read whole NVMEM content. It's
especially useful for NVMEM devices without hardcoded layout (like
U-Boot environment data block).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 8679e8b4a1 ("nvmem: u-boot-env: error if NVMEM device is too small")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 365130fd47 ]
Similar to recently propose for_each_child_of_node_scoped() this
new version of the loop macro instantiates a new local
struct fwnode_handle * that uses the __free(fwnode_handle) auto
cleanup handling so that if a reference to a node is held on early
exit from the loop the reference will be released. If the loop
runs to completion, the child pointer will be NULL and no action will
be taken.
The reason this is useful is that it removes the need for
fwnode_handle_put() on early loop exits. If there is a need
to retain the reference, then return_ptr(child) or no_free_ptr(child)
may be used to safely disable the auto cleanup.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240217164249.921878-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 61cbfb5368 ("iio: adc: ad7124: fix DT configuration parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59ed5e2d50 ]
Useful where the fwnode_handle was obtained from a call such as
fwnode_find_reference() as it will safely do nothing if IS_ERR() is true
and will automatically release the reference on the variable leaving
scope.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240217164249.921878-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 61cbfb5368 ("iio: adc: ad7124: fix DT configuration parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dd1426e2c ]
It verified GFX9-11 swizzle modes on GFX12, which has undefined behavior.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f3a0523918 upstream.
amd-pstate driver utilizes the functions and data structures
provided by the ITMT architecture to enable the scheduler to
favor scheduling on cores which can be get a higher frequency
with lower voltage. We call it amd-pstate preferrred core.
Here sched_set_itmt_core_prio() is called to set priorities and
sched_set_itmt_support() is called to enable ITMT feature.
amd-pstate driver uses the highest performance value to indicate
the priority of CPU. The higher value has a higher priority.
The initial core rankings are set up by amd-pstate when the
system boots.
Add a variable hw_prefcore in cpudata structure. It will check
if the processor and power firmware support preferred core
feature.
Add one new early parameter `disable` to allow user to disable
the preferred core.
Only when hardware supports preferred core and user set `enabled`
in early parameter, amd pstate driver supports preferred core featue.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12753d71e8 upstream.
Add support for getting the highest performance to the
generic CPPC driver. This enables downstream drivers
such as amd-pstate to discover and use these values.
Refer to Chapter 8.4.6.1.1.1. Highest Performance of ACPI
Specification 6.5 for details on continuous performance control
of CPPC (linked below).
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Link: https://uefi.org/specs/ACPI/6.5/08_Processor_Configuration_and_Control.html?highlight=cppc#highest-performance
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eba2591d99 upstream.
Instead of directly dereferencing page tables entries, which can cause
issues (see commit 20a004e7b0 ("arm64: mm: Use READ_ONCE/WRITE_ONCE when
accessing page tables"), let's introduce new functions to get the
pud/p4d/pgd entries (the pte and pmd versions already exist).
Note that arm pgd_t is actually an array so pgdp_get() is defined as a
macro to avoid a build error.
Those new functions will be used in subsequent commits by the riscv
architecture.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231213203001.179237-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33f339a1ba ]
There's a potential race when `cgroup_bpf_enabled(CGROUP_GETSOCKOPT)` is
false during the execution of `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN`, but
becomes true when `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is called.
This inconsistency can lead to `BPF_CGROUP_RUN_PROG_GETSOCKOPT` receiving
an "-EFAULT" from `__cgroup_bpf_run_filter_getsockopt(max_optlen=0)`.
Scenario shown as below:
`process A` `process B`
----------- ------------
BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN
enable CGROUP_GETSOCKOPT
BPF_CGROUP_RUN_PROG_GETSOCKOPT (-EFAULT)
To resolve this, remove the `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN` macro and
directly uses `copy_from_sockptr` to ensure that `max_optlen` is always
set before `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is invoked.
Fixes: 0d01da6afc ("bpf: implement getsockopt and setsockopt hooks")
Co-developed-by: Yanghui Li <yanghui.li@mediatek.com>
Signed-off-by: Yanghui Li <yanghui.li@mediatek.com>
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20240830082518.23243-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b05b0cd78 ]
Split __sys_getsockopt() into two functions by removing the core
logic into a sub-function (do_sock_getsockopt()). This will avoid
code duplication when doing the same operation in other callers, for
instance.
do_sock_getsockopt() will be called by io_uring getsockopt() command
operation in the following patch.
The same was done for the setsockopt pair.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-5-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 33f339a1ba ("bpf, net: Fix a potential race in do_sock_getsockopt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1406245c29 ]
Split __sys_setsockopt() into two functions by removing the core
logic into a sub-function (do_sock_setsockopt()). This will avoid
code duplication when doing the same operation in other callers, for
instance.
do_sock_setsockopt() will be called by io_uring setsockopt() command
operation in the following patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-4-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 33f339a1ba ("bpf, net: Fix a potential race in do_sock_getsockopt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f31e0d14d ]
The whole network stack uses sockptr, and while it doesn't move to
something more modern, let's use sockptr in setsockptr BPF hooks, so, it
could be used by other callers.
The main motivation for this change is to use it in the io_uring
{g,s}etsockopt(), which will use a userspace pointer for *optval, but, a
kernel value for optlen.
Link: https://lore.kernel.org/all/ZSArfLaaGcfd8LH8@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-3-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 33f339a1ba ("bpf, net: Fix a potential race in do_sock_getsockopt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a615f67e1a ]
The whole network stack uses sockptr, and while it doesn't move to
something more modern, let's use sockptr in getsockptr BPF hooks, so, it
could be used by other callers.
The main motivation for this change is to use it in the io_uring
{g,s}etsockopt(), which will use a userspace pointer for *optval, but, a
kernel value for optlen.
Link: https://lore.kernel.org/all/ZSArfLaaGcfd8LH8@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 33f339a1ba ("bpf, net: Fix a potential race in do_sock_getsockopt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c898f6d7b0 ]
This introduces hci_cmd_sync_run/hci_cmd_sync_run_once which acts like
hci_cmd_sync_queue/hci_cmd_sync_queue_once but runs immediately when
already on hdev->cmd_sync_work context.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 881559af5f ]
If connection is still queued/pending in the cmd_sync queue it means no
command has been generated and it should be safe to just dequeue the
callback when it is being aborted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 505ea2b295 ]
This adds functions to queue, dequeue and lookup into the cmd_sync
list.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f641f03ab ]
This fixes the UAF on __hci_acl_create_connection_sync caused by
connection abortion, it uses the same logic as to LE_LINK which uses
hci_cmd_sync_cancel to prevent the callback to run if the connection is
abort prematurely.
Reported-by: syzbot+3f0a39be7a2035700868@syzkaller.appspotmail.com
Fixes: 45340097ce ("Bluetooth: hci_conn: Only do ACL connections sequentially")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4aa42119d9 ]
With the last commit we moved to using the hci_sync queue for "Create
Connection" requests, removing the need for retrying the paging after
finished/failed "Create Connection" requests and after the end of
inquiries.
hci_conn_check_pending() was used to trigger this retry, we can remove it
now.
Note that we can also remove the special handling for COMMAND_DISALLOWED
errors in the completion handler of "Create Connection", because "Create
Connection" requests are now always serialized.
This is somewhat reverting commit 4c67bc74f0 ("[Bluetooth] Support
concurrent connect requests").
With this, the BT_CONNECT2 state of ACL hci_conn objects should now be
back to meaning only one thing: That we received a "Connection Request"
from another device (see hci_conn_request_evt), but the response to that
is going to be deferred.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45340097ce ]
Pretty much all bluetooth chipsets only support paging a single device at
a time, and if they don't reject a secondary "Create Connection" request
while another is still ongoing, they'll most likely serialize those
requests in the firware.
With commit 4c67bc74f0 ("[Bluetooth] Support concurrent connect
requests") we started adding some serialization of our own in case the
adapter returns "Command Disallowed" HCI error.
This commit was using the BT_CONNECT2 state for the serialization, this
state is also used for a few more things (most notably to indicate we're
waiting for an inquiry to cancel) and therefore a bit unreliable. Also
not all BT firwares would respond with "Command Disallowed" on too many
connection requests, some will also respond with "Hardware Failure"
(BCM4378), and others will error out later and send a "Connect Complete"
event with error "Rejected Limited Resources" (Marvell 88W8897).
We can clean things up a bit and also make the serialization more reliable
by using our hci_sync machinery to always do "Create Connection" requests
in a sequential manner.
This is very similar to what we're already doing for establishing LE
connections, and it works well there.
Note that this causes a test failure in mgmt-tester (test "Pair Device
- Power off 1") because the hci_abort_conn_sync() changes the error we
return on timeout of the "Create Connection". We'll fix this on the
mgmt-tester side by adjusting the expected error for the test.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79c0868ad6 ]
We have error defines already, so let's use them.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a5caec7f8 ]
When adding devm_regulator_bulk_get_const() I missed adding a stub for
when CONFIG_REGULATOR is not enabled. Under certain conditions (like
randconfig testing) this can cause the compiler to reports errors
like:
error: implicit declaration of function 'devm_regulator_bulk_get_const';
did you mean 'devm_regulator_bulk_get_enable'?
Add the stub.
Fixes: 1de452a0ed ("regulator: core: Allow drivers to define their init data as const")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408301813.TesFuSbh-lkp@intel.com/
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20240830073511.1.Ib733229a8a19fad8179213c05e1af01b51e42328@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ea72ce5da2 upstream.
iounmap() on x86 occasionally fails to unmap because the provided valid
ioremap address is not below high_memory. It turned out that this
happens due to KASLR.
KASLR uses the full address space between PAGE_OFFSET and vaddr_end to
randomize the starting points of the direct map, vmalloc and vmemmap
regions. It thereby limits the size of the direct map by using the
installed memory size plus an extra configurable margin for hot-plug
memory. This limitation is done to gain more randomization space
because otherwise only the holes between the direct map, vmalloc,
vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel, so
the memory hot-plug and resource management related code paths still
operate under the assumption that the available address space can be
determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of the
direct map and if unlucky this address is in the vmalloc space, which
causes high_memory to become greater than VMALLOC_START and consequently
causes iounmap() to fail for valid ioremap addresses.
MAX_PHYSMEM_BITS cannot be changed for that because the randomization
does not align with address bit boundaries and there are other places
which actually require to know the maximum number of address bits. All
remaining usage sites of MAX_PHYSMEM_BITS have been analyzed and found
to be correct.
Cure this by exposing the end of the direct map via PHYSMEM_END and use
that for the memory hot-plug and resource management related places
instead of relying on MAX_PHYSMEM_BITS. In the KASLR case PHYSMEM_END
maps to a variable which is initialized by the KASLR initialization and
otherwise it is based on MAX_PHYSMEM_BITS as before.
To prevent future hickups add a check into add_pages() to catch callers
trying to add memory above PHYSMEM_END.
Fixes: 0483e1fa6e ("x86/mm: Implement ASLR for kernel memory regions")
Reported-by: Max Ramanouski <max8rr8@gmail.com>
Reported-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-By: Max Ramanouski <max8rr8@gmail.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed6soy3z.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71833e79a4 upstream.
Replace IS_ENABLED() with IS_REACHABLE() to substitute empty stubs for:
i2c_acpi_get_i2c_resource()
i2c_acpi_client_count()
i2c_acpi_find_bus_speed()
i2c_acpi_new_device_by_fwnode()
i2c_adapter *i2c_acpi_find_adapter_by_handle()
i2c_acpi_waive_d0_probe()
commit f17c06c660 ("i2c: Fix conditional for substituting empty ACPI
functions") partially fixed this conditional to depend on CONFIG_I2C,
but used IS_ENABLED(), which is wrong since CONFIG_I2C is tristate.
CONFIG_ACPI is boolean but let's also change it to use IS_REACHABLE()
to future-proof it against becoming tristate.
Somehow despite testing various combinations of CONFIG_I2C and CONFIG_ACPI
we missed the combination CONFIG_I2C=m, CONFIG_ACPI=y.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f17c06c660 ("i2c: Fix conditional for substituting empty ACPI functions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408141333.gYnaitcV-lkp@intel.com/
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 61e2bbafb0 ]
When I was doing some experiments, I found that when using the first
parameter, namely, struct net, in ip_metrics_convert() always triggers NULL
pointer crash. Then I digged into this part, realizing that we can remove
this one due to its uselessness.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 172e422ffe ]
In some setups directories can have many (usually negative) dentries.
Hence __fsnotify_update_child_dentry_flags() function can take a
significant amount of time. Since the bulk of this function happens
under inode->i_lock this causes a significant contention on the lock
when we remove the watch from the directory as the
__fsnotify_update_child_dentry_flags() call from fsnotify_recalc_mask()
races with __fsnotify_update_child_dentry_flags() calls from
__fsnotify_parent() happening on children. This can lead upto softlockup
reports reported by users.
Fix the problem by calling fsnotify_update_children_dentry_flags() to
set PARENT_WATCHED flags only when parent starts watching children.
When parent stops watching children, clear false positive PARENT_WATCHED
flags lazily in __fsnotify_parent() for each accessed child.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56f45266df ]
This timer HW supports 8, 16 and 32-bit timer widths. This
driver currently uses a u32 to store the max possible value
of the timer. However, statements perform addition of 2 in
xilinx_pwm_apply() when calculating the period_cycles and
duty_cycles values. Since priv->max is a u32, this will
result in an overflow to 1 which will not only be incorrect
but fail on range comparison. This results in making it
impossible to set the PWM in this timer mode.
There are two obvious solutions to the current problem:
1. Cast each instance where overflow occurs to u64.
2. Change priv->max from a u32 to a u64.
Solution #1 requires more code modifications, and leaves
opportunity to introduce similar overflows if other math
statements are added in the future. These may also go
undetected if running in non 32-bit timer modes.
Solution #2 is the much smaller and cleaner approach and
thus the chosen method in this patch.
This was tested on a Zynq UltraScale+ with multiple
instances of the PWM IP.
Signed-off-by: Ken Sloat <ksloat@designlinxhs.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/SJ0P222MB0107490C5371B848EF04351CA1E19@SJ0P222MB0107.NAMP222.PROD.OUTLOOK.COM
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e3f0d6938 ]
Add qcom_smem_bust_hwspin_lock_by_host to enable remoteproc to bust the
hwspin_lock owned by smem. In the event the remoteproc crashes
unexpectedly, the remoteproc driver can invoke this API to try and bust
the hwspin_lock and release the lock if still held by the remoteproc
device.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-3-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c327d5659 ]
When a remoteproc crashes or goes down unexpectedly this can result in
a state where locks held by the remoteproc will remain locked possibly
resulting in deadlock. This new API hwspin_lock_bust() allows
hwspinlock implementers to define a bust operation for freeing previously
acquired hwspinlocks after verifying ownership of the acquired lock.
Signed-off-by: Richard Maina <quic_rmaina@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-1-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f17c06c660 ]
Add IS_ENABLED(CONFIG_I2C) to the conditional around a bunch of ACPI
functions.
The conditional around these functions depended only on CONFIG_ACPI.
But the functions are implemented in I2C core, so are only present if
CONFIG_I2C is enabled.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6ce8a28c7 ]
The UMP 1.1 spec says that an RPN/NRPN should be sent when one of the
following occurs:
* a CC 38 is received
* a subsequent CC 6 is received
* a CC 98, 99, 100, and 101 is received, indicating the last RPN/NRPN
message has ended and a new one has started
That said, we should send a partial data even if it's not fully
filled. Let's change the UMP conversion helper code to follow that
rule.
Link: https://patch.msgid.link/20240731130528.12600-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c60eb0cc3 ]
If the user sets use_mcq_mode to 0, the host will try to activate the LSDB
mode unconditionally even when the LSDBS of device HCI cap is 1. This makes
commands time out and causes device probing to fail.
To prevent that problem, check the LSDBS cap when MCQ is not supported.
Signed-off-by: Kyoungrul Kim <k831.kim@samsung.com>
Link: https://lore.kernel.org/r/20240709232520epcms2p8ebdb5c4fccc30a6221390566589bf122@epcms2p8
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3568affcdd upstream.
As pointed out by Stephen Boyd it is possible that during initialization
of the pmic_glink child drivers, the protection-domain notifiers fires,
and the associated work is scheduled, before the client registration
returns and as a result the local "client" pointer has been initialized.
The outcome of this is a NULL pointer dereference as the "client"
pointer is blindly dereferenced.
Timeline provided by Stephen:
CPU0 CPU1
---- ----
ucsi->client = NULL;
devm_pmic_glink_register_client()
client->pdr_notify(client->priv, pg->client_state)
pmic_glink_ucsi_pdr_notify()
schedule_work(&ucsi->register_work)
<schedule away>
pmic_glink_ucsi_register()
ucsi_register()
pmic_glink_ucsi_read_version()
pmic_glink_ucsi_read()
pmic_glink_ucsi_read()
pmic_glink_send(ucsi->client)
<client is NULL BAD>
ucsi->client = client // Too late!
This code is identical across the altmode, battery manager and usci
child drivers.
Resolve this by splitting the allocation of the "client" object and the
registration thereof into two operations.
This only happens if the protection domain registry is populated at the
time of registration, which by the introduction of commit '1ebcde047c
("soc: qcom: add pd-mapper implementation")' became much more likely.
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/all/CAMi1Hd2_a7TjA7J9ShrAbNOd_CoZ3D87twmO5t+nZxC9sX18tA@mail.gmail.com/
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/ZqiyLvP0gkBnuekL@hovoldconsulting.com/
Reported-by: Stephen Boyd <swboyd@chromium.org>
Closes: https://lore.kernel.org/all/CAE-0n52JgfCBWiFQyQWPji8cq_rCsviBpW-m72YitgNfdaEhQg@mail.gmail.com/
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-1-eec53c750a04@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0870b0d8b3 ]
Typically, busy-polling durations are below 100 usec.
When/if the busy-poller thread migrates to another cpu,
local_clock() can be off by +/-2msec or more for small
values of HZ, depending on the platform.
Use ktimer_get_ns() to ensure deterministic behavior,
which is the whole point of busy-polling.
Fixes: 0602129286 ("net: add low latency socket poll")
Fixes: 9a3c71aa80 ("net: convert low latency sockets to sched_clock()")
Fixes: 3708983452 ("sched, net: Fixup busy_loop_us_clock()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240827114916.223377-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fd0628918 ]
Subtract network offset to skb->len before performing IPv4 header sanity
checks, then adjust transport offset from offset from mac header.
Jorge Ortiz says:
When small UDP packets (< 4 bytes payload) are sent from eth0,
`meta l4proto udp` condition is not met because `NFT_PKTINFO_L4PROTO` is
not set. This happens because there is a comparison that checks if the
transport header offset exceeds the total length. This comparison does
not take into account the fact that the skb network offset might be
non-zero in egress mode (e.g., 14 bytes for Ethernet header).
Fixes: 0ae8e4cca7 ("netfilter: nf_tables: set transport offset from mac header for netdev/egress")
Reported-by: Jorge Ortiz <jorge.ortiz.escribano@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34af4554fb ]
To avoid issues with out of order cleanup, or ambiguity about when the
auto freed data is first instantiated, do it within the for loop definition.
The disadvantage is that the struct device_node *child variable creation
is not immediately obvious where this is used.
However, in many cases, if there is another definition of
struct device_node *child; the compiler / static analysers will notify us
that it is unused, or uninitialized.
Note that, in the vast majority of cases, the _available_ form should be
used and as code is converted to these scoped handers, we should confirm
that any cases that do not check for available have a good reason not
to.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-3-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: afc954fd22 ("thermal: of: Fix OF node leak in thermal_of_trips_init() error path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9448e55d03 upstream.
The recent addition of scope based cleanup support to the kernel
provides a convenient tool to reduce the chances of leaking reference
counts where of_node_put() should have been called in an error path.
This enables
struct device_node *child __free(device_node) = NULL;
for_each_child_of_node(np, child) {
if (test)
return test;
}
with no need for a manual call of of_node_put().
A following patch will reduce the scope of the child variable to the
for loop, to avoid an issues with ordering of autocleanup, and make it
obvious when this assigned a non NULL value.
In this simple example the gains are small but there are some very
complex error handling cases buried in these loops that will be
greatly simplified by enabling early returns with out the need
for this manual of_node_put() call.
Note that there are coccinelle checks in
scripts/coccinelle/iterators/for_each_child.cocci to detect a failure
to call of_node_put(). This new approach does not cause false positives.
Longer term we may want to add scripting to check this new approach is
done correctly with no double of_node_put() calls being introduced due
to the auto cleanup. It may also be useful to script finding places
this new approach is useful.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-2-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
