commit d405ec23df upstream.
Commit d33bd88ac0 ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0 ("ACPI: processor: perflib: Fix initial _PPC limit application")
Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d33bd88ac0 upstream.
If the BIOS sets a _PPC frequency limit upfront, it will fail to take
effect due to a call ordering issue. Namely, freq_qos_update_request()
is called before freq_qos_add_request() for the given request causing
the constraint update to be ignored. The call sequence in question is
as follows:
cpufreq_policy_online()
acpi_cpufreq_cpu_init()
acpi_processor_register_performance()
acpi_processor_get_performance_info()
acpi_processor_get_platform_limit()
freq_qos_update_request(&perflib_req) <- inactive QoS request
blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
CPUFREQ_CREATE_POLICY)
acpi_processor_notifier()
acpi_processor_ppc_init()
freq_qos_add_request(&perflib_req) <- QoS request activation
Address this by adding an acpi_processor_get_platform_limit() call
to acpi_processor_ppc_init(), after the perflib_req activation via
freq_qos_add_request(), which causes the initial _PPC limit to be
picked up as appropriate. However, also ensure that the _PPC limit
will not be picked up in the cases when the cpufreq driver does not
call acpi_processor_register_performance() by adding a pr->performance
check to the related_cpus loop in acpi_processor_ppc_init().
Fixes: d15ce41273 ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier")
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Link: https://patch.msgid.link/20250721032606.3459369-1-lijiayi@kylinos.cn
[ rjw: Consolidate pr-related checks in acpi_processor_ppc_init() ]
[ rjw: Subject and changelog adjustments ]
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 2d8b39a62a ACPI: processor: Avoid NULL pointer dereferences at init time
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 3000ce3c52 cpufreq: Use per-policy frequency QoS
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: a1bb46c36c ACPI: processor: Add QoS requests for all CPUs
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e65cb01134 upstream.
The _CRS resources in many cases want to have ResourceSource field
to be a type of ACPI String. This means that to compile properly
we need to enclosure the name path into double quotes. This will
in practice defer the interpretation to a run-time stage, However,
this may be interpreted differently on different OSes and ACPI
interpreter implementations. In particular ACPICA might not correctly
recognize the leading '^' (caret) character and will not resolve
the relative name path properly. On top of that, this piece may be
used in SSDTs which are loaded after the DSDT and on itself may also
not resolve relative name paths outside of their own scopes.
With this all said, fix documentation to use fully-qualified name
paths always to avoid any misinterpretations, which is proven to
work.
Fixes: 8eb5c87a92 ("i2c: add ACPI support for I2C mux ports")
Reported-by: Yevhen Kondrashyn <e.kondrashyn@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250710170225.961303-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2e467a482 upstream.
Ensure that epoll instances can never form a graph deeper than
EP_MAX_NESTS+1 links.
Currently, ep_loop_check_proc() ensures that the graph is loop-free and
does some recursion depth checks, but those recursion depth checks don't
limit the depth of the resulting tree for two reasons:
- They don't look upwards in the tree.
- If there are multiple downwards paths of different lengths, only one of
the paths is actually considered for the depth check since commit
28d82dc1c4 ("epoll: limit paths").
Essentially, the current recursion depth check in ep_loop_check_proc() just
serves to prevent it from recursing too deeply while checking for loops.
A more thorough check is done in reverse_path_check() after the new graph
edge has already been created; this checks, among other things, that no
paths going upwards from any non-epoll file with a length of more than 5
edges exist. However, this check does not apply to non-epoll files.
As a result, it is possible to recurse to a depth of at least roughly 500,
tested on v6.15. (I am unsure if deeper recursion is possible; and this may
have changed with commit 8c44dac8ad ("eventpoll: Fix priority inversion
problem").)
To fix it:
1. In ep_loop_check_proc(), note the subtree depth of each visited node,
and use subtree depths for the total depth calculation even when a subtree
has already been visited.
2. Add ep_get_upwards_depth_proc() for similarly determining the maximum
depth of an upwards walk.
3. In ep_loop_check(), use these values to limit the total path length
between epoll nodes to EP_MAX_NESTS edges.
Fixes: 22bacca48a ("epoll: prevent creating circular epoll structures")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250711-epoll-recursion-fix-v1-1-fb2457c33292@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04a2c4b451 upstream.
When sysctl_nr_open is set to a very high value (for example, 1073741816
as set by systemd), processes attempting to use file descriptors near
the limit can trigger massive memory allocation attempts that exceed
INT_MAX, resulting in a WARNING in mm/slub.c:
WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288
This happens because kvmalloc_array() and kvmalloc() check if the
requested size exceeds INT_MAX and emit a warning when the allocation is
not flagged with __GFP_NOWARN.
Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a
process calls dup2(oldfd, 1073741880), the kernel attempts to allocate:
- File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes
- Multiple bitmaps: ~400MB
- Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647)
Reproducer:
1. Set /proc/sys/fs/nr_open to 1073741816:
# echo 1073741816 > /proc/sys/fs/nr_open
2. Run a program that uses a high file descriptor:
#include <unistd.h>
#include <sys/resource.h>
int main() {
struct rlimit rlim = {1073741824, 1073741824};
setrlimit(RLIMIT_NOFILE, &rlim);
dup2(2, 1073741880); // Triggers the warning
return 0;
}
3. Observe WARNING in dmesg at mm/slub.c:5027
systemd commit a8b627a introduced automatic bumping of fs.nr_open to the
maximum possible value. The rationale was that systems with memory
control groups (memcg) no longer need separate file descriptor limits
since memory is properly accounted. However, this change overlooked
that:
1. The kernel's allocation functions still enforce INT_MAX as a maximum
size regardless of memcg accounting
2. Programs and tests that legitimately test file descriptor limits can
inadvertently trigger massive allocations
3. The resulting allocations (>8GB) are impractical and will always fail
systemd's algorithm starts with INT_MAX and keeps halving the value
until the kernel accepts it. On most systems, this results in nr_open
being set to 1073741816 (0x3ffffff8), which is just under 1GB of file
descriptors.
While processes rarely use file descriptors near this limit in normal
operation, certain selftests (like
tools/testing/selftests/core/unshare_test.c) and programs that test file
descriptor limits can trigger this issue.
Fix this by adding a check in alloc_fdtable() to ensure the requested
allocation size does not exceed INT_MAX. This causes the operation to
fail with -EMFILE instead of triggering a kernel warning and avoids the
impractical >8GB memory allocation request.
Fixes: 9cfe015aa4 ("get rid of NR_OPEN and introduce a sysctl_nr_open")
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/20250629074021.1038845-1-sashal@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63ce537246 upstream.
Using device_find_child() to locate a probed virtual-device-port node
causes a device refcount imbalance, as device_find_child() internally
calls get_device() to increment the device’s reference count before
returning its pointer. vdc_port_mpgroup_check() directly returns true
upon finding a matching device without releasing the reference via
put_device(). We should call put_device() to decrement refcount.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 3ee70591d6 ("sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250719075856.3447953-1-make24@iscas.ac.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c65001c57 upstream.
When the client sends an OPEN with claim type CLAIM_DELEG_CUR_FH or
CLAIM_DELEGATION_CUR, the delegation stateid and the file handle
must belong to the same file, otherwise return NFS4ERR_INVAL.
Note that RFC8881, section 8.2.4, mandates the server to return
NFS4ERR_BAD_STATEID if the selected table entry does not match the
current filehandle. However returning NFS4ERR_BAD_STATEID in the
OPEN causes the client to retry the operation and therefor get the
client into a loop. To avoid this situation we return NFS4ERR_INVAL
instead.
Reported-by: Petro Pavlov <petro.pavlov@vastdata.com>
Fixes: c44c5eeb2c ("[PATCH] nfsd4: add open state code for CLAIM_DELEGATE_CUR")
Cc: stable@vger.kernel.org
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 908e4ead7f upstream.
Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.
Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.
In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().
Reported-by: lei lu <llfamsec@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/CAEBF3_b=UvqzNKdnfD_52L05Mqrqui9vZ2eFamgAbV0WG+FNWQ@mail.gmail.com/
Fixes: d20c11d86d ("nfsd: Protect session creation and client confirm using client_lock")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4faff70959 upstream.
Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.
Closes: https://lore.kernel.org/netdev/20250806082931.3289134-1-xu.yang_2@nxp.com
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250811092931.860333-1-xu.yang_2@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fa840230f upstream.
Make sure to drop the reference to the ptp device taken by
of_find_device_by_node() when querying the time stamping capabilities.
Note that holding a reference to the ptp device does not prevent its
driver data from going away.
Fixes: 17ae0b0ee9 ("dpaa_eth: add the get_ts_info interface for ethtool")
Cc: stable@vger.kernel.org # 4.19
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-2-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da717540ac upstream.
Make sure to drop the reference to the ptp device taken by
of_find_device_by_node() when querying the time stamping capabilities.
Note that holding a reference to the ptp device does not prevent its
driver data from going away.
Fixes: 7349a74ea7 ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Cc: stable@vger.kernel.org # 4.18
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-4-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 759dfc7d04 upstream.
netlink_attachskb() checks for the socket's read memory allocation
constraints. Firstly, it has:
rmem < READ_ONCE(sk->sk_rcvbuf)
to check if the just increased rmem value fits into the socket's receive
buffer. If not, it proceeds and tries to wait for the memory under:
rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)
The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is
equal to sk->sk_rcvbuf. Thus the function neither successfully accepts
these conditions, nor manages to reschedule the task - and is called in
retry loop for indefinite time which is caught as:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212
(t=26000 jiffies g=230833 q=259957)
NMI backtrace for cpu 0
CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014
Call Trace:
<IRQ>
dump_stack lib/dump_stack.c:120
nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105
nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62
rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335
rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590
update_process_times kernel/time/timer.c:1953
tick_sched_handle kernel/time/tick-sched.c:227
tick_sched_timer kernel/time/tick-sched.c:1399
__hrtimer_run_queues kernel/time/hrtimer.c:1652
hrtimer_interrupt kernel/time/hrtimer.c:1717
__sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113
asm_call_irq_on_stack arch/x86/entry/entry_64.S:808
</IRQ>
netlink_attachskb net/netlink/af_netlink.c:1234
netlink_unicast net/netlink/af_netlink.c:1349
kauditd_send_queue kernel/audit.c:776
kauditd_thread kernel/audit.c:897
kthread kernel/kthread.c:328
ret_from_fork arch/x86/entry/entry_64.S:304
Restore the original behavior of the check which commit in Fixes
accidentally missed when restructuring the code.
Found by Linux Verification Center (linuxtesting.org).
Fixes: ae8f160e7e ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250728080727.255138-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4740e1e2f3 upstream.
Quote from the virtio specification chapter 4.2.2.2:
"For the device-specific configuration space, the driver MUST use 8 bit
wide accesses for 8 bit wide fields, 16 bit wide and aligned accesses
for 16 bit wide fields and 32 bit wide and aligned accesses for 32 and
64 bit wide fields."
Signed-off-by: Harald Mommer <harald.mommer@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Fixes: 3a29355a22 ("gpio: Add virtio-gpio driver")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20250724143718.5442-2-harald.mommer@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecfd41166b upstream.
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
Fixes: 11785ef532 ("ALSA: usb-audio: Initial Power Domain support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d832ccbc30 upstream.
UAC3 power domain descriptors need to be verified with its variable
bLength for avoiding the unexpected OOB accesses by malicious
firmware, too.
Fixes: 9a2fe9b801 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf73d9970e upstream.
__kernel_rwf_t is defined as int, the actual size of which is
implementation defined. It won't go well if some compiler / archs
ever defines it as i64, so replace it with __u32, hoping that
there is no one using i16 for it.
Cc: stable@vger.kernel.org
Fixes: 2b188cc1bb ("Add io_uring IO interface")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/47c666c4ee1df2018863af3a2028af18feef11ed.1751412511.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 151c0aa896 upstream.
1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.
BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1
CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1
kasan_report+0x188/0x1cc
__asan_load8+0xb4/0xbc
composite_dev_cleanup+0xf4/0x2c0
configfs_composite_bind+0x210/0x7ac
udc_bind_to_driver+0xb4/0x1ec
usb_gadget_probe_driver+0xec/0x21c
gadget_dev_desc_UDC_store+0x264/0x27c
Fixes: 37a3a53342 ("usb: gadget: OS Feature Descriptors support")
Cc: stable <stable@kernel.org>
Signed-off-by: Tao Xue <xuetao09@huawei.com>
Link: https://lore.kernel.org/r/20250721093908.14967-1-xuetao09@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 188cb385bb upstream.
When pmd_to_hmm_pfn_flags() is unused, it prevents kernel builds with
clang, `make W=1` and CONFIG_TRANSPARENT_HUGEPAGE=n:
mm/hmm.c:186:29: warning: unused function 'pmd_to_hmm_pfn_flags' [-Wunused-function]
Fix this by moving the function to the respective existing ifdeffery
for its the only user.
See also:
6863f5643d ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Link: https://lkml.kernel.org/r/20250710082403.664093-1-andriy.shevchenko@linux.intel.com
Fixes: 992de9a8b7 ("mm/hmm: allow to mirror vma of a file on a DAX backed filesystem")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35ad7e1815 upstream.
Hardware or bootloader will initialize TLB entries to any value, which
may collide with kernel's UNIQUE_ENTRYHI value. On MIPS microAptiv/M5150
family of cores this will trigger machine check exception and cause boot
failure. On M5150 simulation this could happen 7 times out of 1000 boots.
Replace local_flush_tlb_all() with r4k_tlb_uniquify() which probes each
TLB ENTRIHI unique value for collisions before it's written, and in case
of collision try a different ASID.
Cc: stable@kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cbe564974 upstream.
In __hdmi_lpe_audio_probe(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in one character less
being copied from 'card->shortname' to 'pcm->name'.
Use the destination buffer size instead to ensure the card name is
copied correctly.
Cc: stable@vger.kernel.org
Fixes: 75b1a8f9d6 ("ALSA: Convert strlcpy to strscpy when return value is unused")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250805234156.60294-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8466d39370 upstream.
The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.
The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.
Cc: stable@vger.kernel.org
Cc: Armando Budianto <sprite@gnuweeb.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi96284nuQ@mail.gmail.com
Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_BTDcXddw@mail.gmail.com
Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb.org
Fixes: 0d9cfc9b8c ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d9cfc9b8c upstream.
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.
Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected
Where the last Connected is then a stable link state.
When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.
In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
Call trace:
arch_local_irq_enable+0x4/0x8
local_bh_enable+0x18/0x20
__netdev_alloc_skb+0x18c/0x1cc
rx_submit+0x68/0x1f8 [usbnet]
rx_alloc_submit+0x4c/0x74 [usbnet]
usbnet_bh+0x1d8/0x218 [usbnet]
usbnet_bh_tasklet+0x10/0x18 [usbnet]
tasklet_action_common+0xa8/0x110
tasklet_action+0x2c/0x34
handle_softirqs+0x2cc/0x3a0
__do_softirq+0x10/0x18
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
__irq_exit_rcu+0xa8/0xb8
irq_exit_rcu+0xc/0x30
el1_interrupt+0x34/0x48
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x38/0x48
xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd]
unlink1+0xd4/0xdc [usbcore]
usb_hcd_unlink_urb+0x70/0xb0 [usbcore]
usb_unlink_urb+0x24/0x44 [usbcore]
unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet]
__handle_link_change+0x34/0x70 [usbnet]
usbnet_deferred_kevent+0x1c0/0x320 [usbnet]
process_scheduled_works+0x2d0/0x48c
worker_thread+0x150/0x1dc
kthread+0xd8/0xe8
ret_from_fork+0x10/0x20
Get around the problem by delaying the carrier on to the scheduled work.
This needs a new flag to keep track of the necessary action.
The carrier ok check cannot be removed as it remains required for the
LINK_RESET event flow.
Fixes: 4b49f58fff ("usbnet: handle link change")
Cc: stable@vger.kernel.org
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aba0c94f61 upstream.
It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can
cause a use-after-free when a connection is made to the bound socket.
The socket returned by accept() also has port VMADDR_PORT_ANY but is not
on the list of unbound sockets. Binding it will result in an extra
refcount decrement similar to the one fixed in fcdd2242c0 (vsock: Keep
the binding until socket destruction).
Modify the check in __vsock_bind_connectible() to also prevent binding
to VMADDR_PORT_ANY.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250807041811.678-1-markovicbudimir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01d3c8417b upstream.
When packet_set_ring() releases po->bind_lock, another thread can
run packet_notifier() and process an NETDEV_UP event.
This race and the fix are both similar to that of commit 15fe076ede
("net/packet: fix a race in packet_bind() and packet_notifier()").
There too the packet_notifier NETDEV_UP event managed to run while a
po->bind_lock critical section had to be temporarily released. And
the fix was similarly to temporarily set po->num to zero to keep
the socket unhooked until the lock is retaken.
The po->bind_lock in packet_set_ring and packet_notifier precede the
introduction of git history.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250801175423.2970334-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 084d2ac403 upstream.
Exercise various mmap(), munmap() and mremap() invocations, which might
cause a perf buffer mapping to be split or truncated.
To avoid hard coding the perf event and having dependencies on
architectures and configuration options, scan through event types in sysfs
and try to open them. On success, try to mmap() and if that succeeds try to
mmap() the AUX buffer.
In case that no AUX buffer supporting event is found, only test the base
buffer mapping. If no mappable event is found or permissions are not
sufficient, skip the tests.
Reserve a PROT_NONE region for both rb and aux tests to allow testing the
case where mremap unmaps beyond the end of a mapped VMA to prevent it from
unmapping unrelated mappings.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b024d7b56c upstream.
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.
Fixes: 45bfb2e504 ("perf/core: Add AUX area to ring buffer for raw data streams")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07091aade3 upstream.
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that.
Fixes: 1e0fb9ec67 ("perf/core: Add pmu callbacks to track event mapping and unmapping")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5468c0fbcc upstream.
Failure of the AUX buffer allocation leaks the reference count.
Set the reference count to 1 only when the allocation succeeds.
Fixes: 45bfb2e504 ("perf/core: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bdd7afc6dc ]
We should call put_receive_buffer() before waking up the callers.
For the internal error case of response->type being unexpected,
we now also call smbd_disconnect_rdma_connection() instead
of not waking up the callers at all.
Note that the SMBD_TRANSFER_DATA case still has problems,
which will be addressed in the next commit in order to make
it easier to review this one.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: f198186aa9 ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6c015b7ac ]
Calling enqueue_reassembly() and wake_up_interruptible(&t->wait_reassembly_queue)
or put_receive_buffer() means the recvmsg/data_transfer pointer might
get re-used by another thread, which means these should be
the last operations before calling return.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe76fdbb9 ]
We should call put_recvmsg() before smb_direct_disconnect_rdma_connection()
in order to call it before waking up the callers.
In all error cases we should call smb_direct_disconnect_rdma_connection()
in order to avoid stale connections.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afb4108c92 ]
In case of failures either ib_dma_map_single() might not be called yet
or ib_dma_unmap_single() was already called.
We should make sure put_recvmsg() only calls ib_dma_unmap_single() if needed.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01027a62b5 ]
There's no need to maintain two lists, we can just
have a single list of receive buffers, which are free to use.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f320dfb0f ]
There are a couple of cases where the error is ignored or the error
code isn't propagated in ca0132_alt_select_out(). Fix those.
Fixes: def3f0a5c7 ("ALSA: hda/ca0132 - Add quirk output selection structures.")
Link: https://patch.msgid.link/20250806094423.8843-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d46e51f1c7 ]
When sending a packet with virtio_net_hdr to tun device, if the gso_type
in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr
size, below crash may happen.
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:4572!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 62 Comm: mytest Not tainted 6.16.0-rc7 #203 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:skb_pull_rcsum+0x8e/0xa0
Code: 00 00 5b c3 cc cc cc cc 8b 93 88 00 00 00 f7 da e8 37 44 38 00 f7 d8 89 83 88 00 00 00 48 8b 83 c8 00 00 00 5b c3 cc cc cc cc <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 000
RSP: 0018:ffffc900001fba38 EFLAGS: 00000297
RAX: 0000000000000004 RBX: ffff8880040c1000 RCX: ffffc900001fb948
RDX: ffff888003e6d700 RSI: 0000000000000008 RDI: ffff88800411a062
RBP: ffff8880040c1000 R08: 0000000000000000 R09: 0000000000000001
R10: ffff888003606c00 R11: 0000000000000001 R12: 0000000000000000
R13: ffff888004060900 R14: ffff888004050000 R15: ffff888004060900
FS: 000000002406d3c0(0000) GS:ffff888084a19000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000040 CR3: 0000000004007000 CR4: 00000000000006f0
Call Trace:
<TASK>
udp_queue_rcv_one_skb+0x176/0x4b0 net/ipv4/udp.c:2445
udp_queue_rcv_skb+0x155/0x1f0 net/ipv4/udp.c:2475
udp_unicast_rcv_skb+0x71/0x90 net/ipv4/udp.c:2626
__udp4_lib_rcv+0x433/0xb00 net/ipv4/udp.c:2690
ip_protocol_deliver_rcu+0xa6/0x160 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x72/0x90 net/ipv4/ip_input.c:233
ip_sublist_rcv_finish+0x5f/0x70 net/ipv4/ip_input.c:579
ip_sublist_rcv+0x122/0x1b0 net/ipv4/ip_input.c:636
ip_list_rcv+0xf7/0x130 net/ipv4/ip_input.c:670
__netif_receive_skb_list_core+0x21d/0x240 net/core/dev.c:6067
netif_receive_skb_list_internal+0x186/0x2b0 net/core/dev.c:6210
napi_complete_done+0x78/0x180 net/core/dev.c:6580
tun_get_user+0xa63/0x1120 drivers/net/tun.c:1909
tun_chr_write_iter+0x65/0xb0 drivers/net/tun.c:1984
vfs_write+0x300/0x420 fs/read_write.c:593
ksys_write+0x60/0xd0 fs/read_write.c:686
do_syscall_64+0x50/0x1c0 arch/x86/entry/syscall_64.c:63
</TASK>
To trigger gso segment in udp_queue_rcv_skb(), we should also set option
UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv
hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try
to pull udphdr, but the skb size has been segmented to gso size, which
leads to this crash.
Previous commit cf329aa42b ("udp: cope with UDP GRO packet misdirection")
introduces segmentation in UDP receive path only for GRO, which was never
intended to be used for UFO, so drop UFO packets in udp_rcv_segment().
Link: https://lore.kernel.org/netdev/20250724083005.3918375-1-wangliang74@huawei.com/
Link: https://lore.kernel.org/netdev/20250729123907.3318425-1-wangliang74@huawei.com/
Fixes: cf329aa42b ("udp: cope with UDP GRO packet misdirection")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250730101458.3470788-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77bf1c55b2 ]
When gso_segs is left at 0, a number of assumptions will end up being
incorrect throughout the stack.
For example, in the GRO-path, we set NAPI_GRO_CB()->count to gso_segs.
So, if a non-LRO'ed packet followed by an LRO'ed packet is being
processed in GRO, the first one will have NAPI_GRO_CB()->count set to 1 and
the next one to 0 (in dev_gro_receive()).
Since commit 531d0d32de
("net/mlx5: Correctly set gso_size when LRO is used")
these packets will get merged (as their gso_size now matches).
So, we end up in gro_complete() with NAPI_GRO_CB()->count == 1 and thus
don't call inet_gro_complete(). Meaning, checksum-validation in
tcp_checksum_complete() will fail with a "hw csum failure".
Even before the above mentioned commit, incorrect gso_segs means that other
things like TCP's accounting of incoming packets (tp->segs_in,
data_segs_in, rcv_ooopack) will be incorrect. Which means that if one
does bytes_received/data_segs_in, the result will be bigger than the
MTU.
Fix this by initializing gso_segs correctly when LRO is used.
Fixes: e586b3b0ba ("net/mlx5: Ethernet Datapath files")
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/netdev/6583783f-f0fb-4fb1-a415-feec8155bc69@nvidia.com/
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250729-mlx5_gso_segs-v1-1-b48c480c1c12@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fb5ff63b3 ]
According to the 1588 standard, it is possible to use both unicast and
multicast frames to send the PTP information. It was noticed that if the
frames were unicast they were not processed by the analyzer meaning that
they were not timestamped. Therefore fix this to match also these
unicast frames.
Fixes: ab2bf93393 ("net: phy: mscc: 1588 block initialization")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250726140307.3039694-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2da4def0f4 ]
Paolo spotted hangs in NIPA running driver tests against virtio.
The tests hang in virtnet_close() -> virtnet_napi_tx_disable().
The problem is only reproducible if running multiple of our tests
in sequence (I used TEST_PROGS="xdp.py ping.py netcons_basic.sh \
netpoll_basic.py stats.py"). Initial suspicion was that this is
a simple case of double-disable of NAPI, but instrumenting the
code reveals:
Deadlocked on NAPI ffff888007cd82c0 (virtnet_poll_tx):
state: 0x37, disabled: false, owner: 0, listed: false, weight: 64
The NAPI was not in fact disabled, owner is 0 (rather than -1),
so the NAPI "thinks" it's scheduled for CPU 0 but it's not listed
(!list_empty(&n->poll_list) => false). It seems odd that normal NAPI
processing would wedge itself like this.
Better suspicion is that netpoll gets enabled while NAPI is polling,
and also grabs the NAPI instance. This confuses napi_complete_done():
[netpoll] [normal NAPI]
napi_poll()
have = netpoll_poll_lock()
rcu_access_pointer(dev->npinfo)
return NULL # no netpoll
__napi_poll()
->poll(->weight)
poll_napi()
cmpxchg(->poll_owner, -1, cpu)
poll_one_napi()
set_bit(NAPI_STATE_NPSVC, ->state)
napi_complete_done()
if (NAPIF_STATE_NPSVC)
return false
# exit without clearing SCHED
This feels very unlikely, but perhaps virtio has some interactions
with the hypervisor in the NAPI ->poll that makes the race window
larger?
Best I could to to prove the theory was to add and trigger this
warning in napi_poll (just before netpoll_poll_unlock()):
WARN_ONCE(!have && rcu_access_pointer(n->dev->npinfo) &&
napi_is_scheduled(n) && list_empty(&n->poll_list),
"NAPI race with netpoll %px", n);
If this warning hits the next virtio_close() will hang.
This patch survived 30 test iterations without a hang (without it
the longest clean run was around 10). Credit for triggering this
goes to Breno's recent netconsole tests.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/c5a93ed1-9abe-4880-a3bb-8d1678018b1d@redhat.com
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20250726010846.1105875-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99765233ab ]
If the NFS client is doing writeback from a workqueue context, avoid using
__GFP_NORETRY for allocations if the task has set PF_MEMALLOC_NOIO or
PF_MEMALLOC_NOFS. The combination of these flags makes memory allocation
failures much more likely.
We've seen those allocation failures show up when the loopback driver is
doing writeback from a workqueue to a file on NFS, where memory allocation
failure results in errors or corruption within the loopback device's
filesystem.
Suggested-by: Trond Myklebust <trondmy@kernel.org>
Fixes: 0bae835b63 ("NFS: Avoid writeback threads getting stuck in mempool_alloc()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/f83ac1155a4bc670f2663959a7a068571e06afd9.1752111622.git.bcodding@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9acb237def ]
Currently, when the server supports NFS4.1 security labels then
security.selinux label in included twice. Instead, only add it
when the server doesn't possess security label support.
Fixes: 243fea1346 ("NFSv4.2: fix listxattr to return selinux security label")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Link: https://lore.kernel.org/r/20250722205641.79394-1-okorniev@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef93a685e0 ]
The function needs to check the minimal filehandle length before it can
access the embedded filehandle.
Reported-by: zhangjian <zhangjian496@huawei.com>
Fixes: 20fa190272 ("nfs: add export operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f06bedfa62 ]
When an applications get killed (SIGTERM/SIGINT) while pNFS client performs a connection
to DS, client ends in an infinite loop of connect-disconnect. This
source of the issue, it that flexfilelayoutdev#nfs4_ff_layout_prepare_ds gets an error
on nfs4_pnfs_ds_connect with status ERESTARTSYS, which is set by rpc_signal_task, but
the error is treated as transient, thus retried.
The issue is reproducible with Ctrl+C the following script(there should be ~1000 files in
a directory, client should must not have any connections to DSes):
```
echo 3 > /proc/sys/vm/drop_caches
for i in *
do
head -1 $i
done
```
The change aims to propagate the nfs4_ff_layout_prepare_ds error state
to the caller that can decide whatever this is a retryable error or not.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Link: https://lore.kernel.org/r/20250627071751.189663-1-tigran.mkrtchyan@desy.de
Fixes: 260f32adb8 ("pNFS/flexfiles: Check the result of nfs4_pnfs_ds_connect")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a2a6fc24 ]
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/171044224.1359864.1752615546988.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1010b4c012 ]
Multiple race conditions existed between the PCIe hotplug driver and the
EEH driver, leading to a variety of kernel oopses of the same general
nature:
<pcie device unplug>
<eeh driver trigger>
<hotplug removal trigger>
<pcie tree reconfiguration>
<eeh recovery next step>
<oops in EEH driver bus iteration loop>
A second class of oops is also seen when the underlying bus disappears
during device recovery.
Refactor the EEH module to be PCI rescan and remove safe. Also clean
up a few minor formatting / readability issues.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1334208367.1359861.1752615503144.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
