[ Upstream commit f45b83ad39 ]
EOPNOTSUPP is more situable than EINVAL for allocating XRCD while XRC
is not supported and unsupported resizing SRQ.
Fixes: 32548870d4 ("RDMA/hns: Add support for XRC on HIP09")
Fixes: 221109e643 ("RDMA/hns: Add interception for resizing SRQs")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231114123449.1106162-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9a85e5eec ]
The patch 1da177e4c3: "Linux-2.6.12-rc2" from Apr 16, 2005
(linux-next), leads to the following Smatch static checker warning:
drivers/infiniband/hw/mthca/mthca_cmd.c:644 mthca_SYS_EN()
error: uninitialized symbol 'out'.
drivers/infiniband/hw/mthca/mthca_cmd.c
636 int mthca_SYS_EN(struct mthca_dev *dev)
637 {
638 u64 out;
639 int ret;
640
641 ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, CMD_TIME_CLASS_D);
We pass out here and it gets used without being initialized.
err = mthca_cmd_post(dev, in_param,
out_param ? *out_param : 0,
^^^^^^^^^^
in_modifier, op_modifier,
op, context->token, 1);
It's the same in mthca_cmd_wait() and mthca_cmd_poll().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/533bc3df-8078-4397-b93d-d1f6cec9b636@moroto.mountain
Link: https://lore.kernel.org/r/c559cb7113158c02d75401ac162652072ef1b5f0.1699867650.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22aa1a2090 ]
The layout of the registers {TILER,SHADER,L2}_PWROFF_LO, used to request
powering off cores, is the same as the {TILER,SHADER,L2}_PWRON_LO ones:
this means that in order to request poweroff of cores, we are supposed
to write a bitmask of cores that should be powered off!
This means that the panfrost_gpu_power_off() function has always been
doing nothing.
Fix powering off the GPU by writing a bitmask of the cores to poweroff
to the relevant PWROFF_LO registers and then check that the transition
(from ON to OFF) has finished by polling the relevant PWRTRANS_LO
registers.
While at it, in order to avoid code duplication, move the core mask
logic from panfrost_gpu_power_on() to a new panfrost_get_core_mask()
function, used in both poweron and poweroff.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102141507.73481-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7707dd6022 ]
The current code does '(bpp << 4) / 16' in the MST PBN
calculation, but that is just the same as 'bpp' so the
DSC codepath achieves absolutely nothing. Fix it up so that
the fractional part of the bpp value is actually used instead
of truncated away. 64*1006 has enough zero lsbs that we can
just shift that down in the dividend and thus still manage
to stick to a 32bit divisor.
And while touching this, let's just make the whole thing more
straightforward by making the passed in bpp value .4 binary
fixed point always, instead of having to pass in different
things based on whether DSC is enabled or not.
v2:
- Fix DSC kunit test cases.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: dc48529fb1 ("drm/dp_mst: Add PBN calculation for DSC modes")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Imre: Fix kunit test cases]
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-3-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 501069dad5 ]
As a preparation for Xe we want to remove all i915_gem_object details away
from frontbuffer tacking code. Due to this move releasing gem object
reference to i915_gem_object_set_frontbuffer.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012072158.4115795-2-jouni.hogander@intel.com
Stable-dep-of: 560ea72c76 ("drm/i915/dp_mst: Fix race between connector registration and setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40974ee421 ]
The select was lost by accident during the multiplatform conversion.
Any davinci-only
arm-linux-gnueabi-ld: arch/arm/mach-davinci/sleep.o: in function `CACHE_FLUSH':
(.text+0x168): undefined reference to `arm926_flush_kern_cache_all'
Fixes: f962396ce2 ("ARM: davinci: support multiplatform build for ARM v5")
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240108110055.1531153-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fc68c4c1a ]
Fix rxrpc_cleanup_ring() to use rxrpc_purge_queue() rather than
skb_queue_purge() so that the count of outstanding skbuffs is correctly
updated when a failed call is cleaned up.
Without this rmmod may hang waiting for rxrpc_n_rx_skbs to become zero.
Fixes: 5d7edbc923 ("rxrpc: Get rid of the Rx ring")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a460f4a684 ]
At the moment, the GigE port is enabled in the mlxbf_gige_probe
function. If the mlxbf_gige_open is not executed, this could cause
pause frames to increase in the case where there is high backgroud
traffic. This results in clogging the port.
So move enabling the OOB port to mlxbf_gige_open.
Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef210ef85d ]
Although the link is up, there is no ip assigned on setups with high background
traffic. Nothing is transmitted nor received. The RX error count keeps on
increasing. After several minutes, the RX error count stagnates and the
GigE interface finally gets an ip.
The issue is that mlxbf_gige_rx_init() is called before phy_start().
As soon as the RX DMA is enabled in mlxbf_gige_rx_init(), the RX CI reaches the max
of 128, and becomes equal to RX PI. RX CI doesn't decrease since the code hasn't
ran phy_start yet.
Bring the PHY up before starting the RX.
Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 393cd8ffd8 ]
blkg_lookup() is called with either queue_lock or rcu read lock, so
use rcu_dereference_check(lockdep_is_held(&q->queue_lock)) for
retrieving 'blkg', which way models the check exactly for covering
queue lock or rcu read lock.
Fix lockdep warning of "block/blk-cgroup.h:254 suspicious rcu_dereference_check() usage!"
from blkg_lookup().
Tested-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Fixes: 83462a6c97 ("blkcg: Drop unnecessary RCU read [un]locks from blkg_conf_prep/finish()")
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231219012833.2129540-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecba66cb36 ]
The gotol implementation uses a wrong data type for the offset: it
should be s32, not s16.
Fixes: c690191e23 ("s390/bpf: Implement unconditional jump with 32-bit offset")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a562c0a2d6 ]
Busy polling while holding the socket lock makes litle sense,
because incoming packets wont reach our receive queue.
Fixes: 8465a5fcd1 ("sctp: add support for busy polling to sctp protocol")
Reported-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4746b36b1a ]
For some reason sctp_poll() generates EPOLLERR if sk->sk_error_queue
is not empty but recvmsg() can not drain the error queue yet.
This is needed to better support timestamping.
I had to export inet_recv_error(), since sctp
can be compiled as a module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20231212145550.3872051-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a562c0a2d6 ("sctp: fix busy polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16b2f26498 ]
When sockets are added to a sockmap or sockhash we allocate and init a
psock. Then update the proto ops with sock_map_init_proto the flow is
sock_hash_update_common
sock_map_link
psock = sock_map_psock_get_checked() <-returns existing psock
sock_map_init_proto(sk, psock) <- updates sk_proto
If the socket is already in a map this results in the sock_map_init_proto
being called multiple times on the same socket. We do this because when
a socket is added to multiple maps this might result in a new set of BPF
programs being attached to the socket requiring an updated ops struct.
This creates a rule where it must be safe to call psock_update_sk_prot
multiple times. When we added a fix for UAF through unix sockets in patch
4dd9a38a753fc we broke this rule by adding a sock_hold in that path
to ensure the sock is not released. The result is if a af_unix stream sock
is placed in multiple maps it results in a memory leak because we call
sock_hold multiple times with only a single sock_put on it.
Fixes: 8866730aed ("bpf, sockmap: af_unix stream sockets need to hold ref for pair sock")
Reported-by: Xingwei Lee <xrivendell7@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-2-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d18125b640 ]
A probe response from a transmitting AP in an Multi-BSSID setup will
contain more than one Multi-Link element. Most likely, only one of these
elements contains per-STA profiles.
Fixes: 2481b5da9c ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.6635eb152735.I94289002d4a2f7b6b44dfa428344854e37b0b29c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a0698f86d ]
The comment was referencing the wrong section of the documentation and
was also subtly wrong as it assumed the rules that apply when sending
probe requests directly to a nontransmitted AP. However, in that case
the response comes from the transmitting AP and the AP MLD ID will be
included.
Fixes: 2481b5da9c ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.0917ab4b5d7f.I76aff0e261a5de44ffb467e591a46597a30d7c0a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a9525de86 ]
null_blk has some rather odd capping of the max_hw_sectors value to
BLK_DEF_MAX_SECTORS, which doesn't make sense - max_hw_sector is the
hardware limit, and BLK_DEF_MAX_SECTORS despite the confusing name is the
default cap for the max_sectors field used for normal file system I/O.
Remove all the capping, and simply leave it to the block layer or
user to take up or not all of that for file system I/O.
Fixes: ea17fd354c ("null_blk: Allow controlling max_hw_sectors limit")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64057f051f ]
Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.
Do not return negative number in case of issue, just print an error and
return count. This fixes a WARN in ttyport_receive_buf().
Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/
Fixes: 7237c4c9ec ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94d0539425 ]
Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.
Do not return a negative number in case of issue, just print an error
and return count. Before this change, in case of error, the returned
negative number was internally converted to 0 in ttyport_receive_buf,
now when the receive buffer is corrupted we return the size of the whole
received data (`count`). This should allow for better recovery in case
receiver/transmitter get out of sync if some data is lost.
This fixes a WARN in ttyport_receive_buf().
Bluetooth: hci0: Frame reassembly failed (-84)
------------[ cut here ]------------
serial serial0: receive_buf returns -84 (count = 6)
WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-ttyport.c:37 ttyport_receive_buf+0xd8/0xf8
Modules linked in: mwifiex_sdio(+) ...
CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-00147-gf1a09972a45a #1
Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
Workqueue: events_unbound flush_to_ldisc
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ttyport_receive_buf+0xd8/0xf8
lr : ttyport_receive_buf+0xd8/0xf8
...
Call trace:
ttyport_receive_buf+0xd8/0xf8
flush_to_ldisc+0xbc/0x1a4
process_scheduled_works+0x16c/0x28c
Closes: https://lore.kernel.org/all/ZWEIhcUXfutb5SY6@francesco-nb.int.toradex.com/
Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d03376c185 ]
This reverts 19f8def031
"Bluetooth: Fix auth_complete_evt for legacy units" which seems to be
working around a bug on a broken controller rather then any limitation
imposed by the Bluetooth spec, in fact if there ws not possible to
re-auth the command shall fail not succeed.
Fixes: 19f8def031 ("Bluetooth: Fix auth_complete_evt for legacy units")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaba7ddc85 ]
Parse netlink attribute containing the chain type in this update, to
bail out if this is different from the existing type.
Otherwise, it is possible to define a chain with the same name, hook and
priority but different type, which is silently ignored.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08e4c8c591 ]
If a transaction is aborted, we should mark the to-be-released NEWSET dead,
just like commit path does for DEL and DESTROYSET commands.
In both cases all remaining elements will be released via
set->ops->destroy().
The existing abort code does NOT post the actual release to the work queue.
Also the entire __nf_tables_abort() function is wrapped in gc_seq
begin/end pair.
Therefore, async gc worker will never try to release the pending set
elements, as gc sequence is always stale.
It might be possible to speed up transaction aborts via work queue too,
this would result in a race and a possible use-after-free.
So fix this before it becomes an issue.
Fixes: 5f68718b34 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b6614e5ea ]
eSR is activated when a chanctx is assigned to more than one link.
During eSR activation we should disable RLC for both phys, and configure
the FW with a special phy command for both phys.
Currently we assign the phy_ctxt to the link only after eSR activation,
so RLC is not disabled for the new phy_ctxt, and a cmd is not sent to FW.
Fix this by first assigning the new phy_ctxt to the link and then
doing the eSR activation.
Fixes: 12bacfc2c0 ("wifi: iwlwifi: handle eSR transitions")
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.3d94507f5d9a.I537fcd73aedf94c7348c03157e486f24301fef14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb2dfacb19 ]
The driver copies the userspace buffer into an internal NUL
byte terminated buffer. While doing so, it was reading beyond
the end of the userspace buffer, overwriting its own NUL
termination in the process.
Fix this by only copying the correct number of bytes.
Fixes: 3f244876ef ("wifi: iwlwifi: make debugfs entries link specific")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.e4913deb2ad4.Idcf6a7e909ff4b7801cd49c2f691f84a2f68eff9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5bfdb4663 ]
It is possible that though multiple links are enabled we cannot enabled
EMLSR enable more than a single link, e.g., all valid links are on the
same band etc. Thus, do not warn in case no valid link pair is found.
Fixes: b9be67fb42 ("wifi: iwlwifi: mvm: Add basic link selection logic")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.142e57a05230.I7cfe78c94c3d15c4c744bccadd8f187e43594932@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2afc3dad39 ]
If we want to drop packets, that's surely a good thing to
do when we want to enter rfkill. Send this command despite
rfkill so we can successfully clean up everything, we need
to handle it separately since it has CMD_WANT_SKB, so it's
not going to automatically return success when in rfkill.
Fixes: d4e3a341b8 ("iwlwifi: mvm: add support for new flush queue response")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.c528a6fa6cec.Ibe5e9560359ccc0fba60c35e01de285c376748a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1a2e5c310 ]
The firmware changed their mind, don't set the chains to zero,
instead set them to 1 as we normally would for connections to
APs that don't use MIMO.
Fixes: 2a7ce54ccc ("iwlwifi: mvm: honour firmware SMPS requests")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.7f031f1a127f.Idc816e0f604b07d22a9d5352bc23c445512fad14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1a23f8ae0 ]
Handle a case of time overflow, where the switch time might
be smaller than the partial TSF in the beacon.
Additionally, apply advertised TTLM earlier in order to be
ready on time on the newly activated links.
Fixes: 702e80470a ("wifi: mac80211: support handling of advertised TID-to-link mapping")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.15079c34e5c8.I0dd50bcceff5953080cdd7aee5118b72c78c6507@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63526897fc ]
Using calculate_bit_shift() to replace _rtl92ee_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.
Fixes: b1a3bfc97c ("rtlwifi: rtl8192ee: Move driver from staging to the regular tree")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-9-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d03e82310 ]
Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.
Fixes: 0c8173385e ("rtl8192ce: Add new driver")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-7-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dedc3a669 ]
Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.
Fixes: 4295cd254a ("rtlwifi: Move common parts of rtl8192ce/phy.c")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-5-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 969bc926f0 ]
Using calculate_bit_shift() to replace _rtl88e_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.
Fixes: f0eb856e0b ("rtlwifi: rtl8188ee: Add new driver")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-4-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52221dfddb ]
There are many same functions like _rtl88e_phy_calculate_bit_shift(),
_rtl92c_phy_calculate_bit_shift() and so on. And these functions can
cause undefined bitwise shift behavior. Add calculate_bit_shift() to
replace them and fix undefined behavior in subsequent patches.
Signed-off-by: Su Hui <suhui@nfschina.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-2-suhui@nfschina.com
Stable-dep-of: 969bc926f0 ("wifi: rtlwifi: rtl8188ee: phy: using calculate_bit_shift()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ac5c53e00 ]
At present, bpf memory allocator uses check_obj_size() to ensure that
ksize() of allocated pointer is equal with the unit_size of used
bpf_mem_cache. Its purpose is to prevent bpf_mem_free() from selecting
a bpf_mem_cache which has different unit_size compared with the
bpf_mem_cache used for allocation. But as reported by lkp, the return
value of ksize() or kmalloc_size_roundup() may change due to slab merge
and it will lead to the warning report in check_obj_size().
The reported warning happened as follows:
(1) in bpf_mem_cache_adjust_size(), kmalloc_size_roundup(96) returns the
object_size of kmalloc-96 instead of kmalloc-cg-96. The object_size of
kmalloc-96 is 96, so size_index for 96 is not adjusted accordingly.
(2) the object_size of kmalloc-cg-96 is adjust from 96 to 128 due to
slab merge in __kmem_cache_alias(). For SLAB, SLAB_HWCACHE_ALIGN is
enabled by default for kmalloc slab, so align is 64 and size is 128 for
kmalloc-cg-96. SLUB has a similar merge logic, but its object_size will
not be changed, because its align is 8 under x86-64.
(3) when unit_alloc() does kmalloc_node(96, __GFP_ACCOUNT, node),
ksize() returns 128 instead of 96 for the returned pointer.
(4) the warning in check_obj_size() is triggered.
Considering the slab merge can happen in anytime (e.g, a slab created in
a new module), the following case is also possible: during the
initialization of bpf_global_ma, there is no slab merge and ksize() for
a 96-bytes object returns 96. But after that a new slab created by a
kernel module is merged to kmalloc-cg-96 and the object_size of
kmalloc-cg-96 is adjust from 96 to 128 (which is possible for x86-64 +
CONFIG_SLAB, because its alignment requirement is 64 for 96-bytes slab).
So soon or later, when bpf_global_ma frees a 96-byte-sized pointer
which is allocated from bpf_mem_cache with unit_size=96, bpf_mem_free()
will free the pointer through a bpf_mem_cache in which unit_size is 128,
because the return value of ksize() changes. The warning for the
mismatch will be triggered again.
A feasible fix is introducing similar APIs compared with ksize() and
kmalloc_size_roundup() to return the actually-allocated size instead of
size which may change due to slab merge, but it will introduce
unnecessary dependency on the implementation details of mm subsystem.
As for now the pointer of bpf_mem_cache is saved in the 8-bytes area
(or 4-bytes under 32-bit host) above the returned pointer, using
unit_size in the saved bpf_mem_cache to select the target cache instead
of inferring the size from the pointer itself. Beside no extra
dependency on mm subsystem, the performance for bpf_mem_free_rcu() is
also improved as shown below.
Before applying the patch, the performances of bpf_mem_alloc() and
bpf_mem_free_rcu() on 8-CPUs VM with one producer are as follows:
kmalloc : alloc 11.69 ± 0.28M/s free 29.58 ± 0.93M/s
percpu : alloc 14.11 ± 0.52M/s free 14.29 ± 0.99M/s
After apply the patch, the performance for bpf_mem_free_rcu() increases
9% and 146% for kmalloc memory and per-cpu memory respectively:
kmalloc: alloc 11.01 ± 0.03M/s free 32.42 ± 0.48M/s
percpu: alloc 12.84 ± 0.12M/s free 35.24 ± 0.23M/s
After the fixes, there is no need to adjust size_index to fix the
mismatch between allocation and free, so remove it as well. Also return
NULL instead of ZERO_SIZE_PTR for zero-sized alloc in bpf_mem_alloc(),
because there is no bpf_mem_cache pointer saved above ZERO_SIZE_PTR.
Fixes: 9077fc228f ("bpf: Use kmalloc_size_roundup() to adjust size_index")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/bpf/202310302113.9f8fe705-oliver.sang@intel.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231216131052.27621-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad6556fb45 ]
The idle state entry/exit/residency times differ from what shipped on
production devices, mostly being overly optimistic in entry times and
overly pessimistic in minimal residency times. Align them with
downstream sources.
Fixes: ffc50b2d38 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-12-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28b735232d ]
The X3 core has different entry/exit/residency time requirements than
the big cluster. Denote them to stop confusing the scheduler.
Fixes: ffc50b2d38 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-11-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c0dbe8b05 ]
The downstream QSDK kernel [1] and GCC_USB1_MOCK_UTMI_CLK are both 24MHz.
Adjust GCC_USB0_MOCK_UTMI_CLK to 24MHz to avoid the following error:
clk: couldn't set gcc_usb0_mock_utmi_clk clk rate to 20000000 (-22), current rate: 24000000
1. 486c8485f5
Fixes: 5726079cd4 ("arm64: dts: ipq6018: Use reference clock to set dwc3 period")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20231218150805.1228160-1-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 827f5fc8d9 ]
The SDHCI hosts on SC7280 are cache-coherent, just like on most fairly
recent Qualcomm SoCs. Mark them as such.
Fixes: 298c81a7d4 ("arm64: dts: qcom: sc7280: Add nodes for eMMC and SD card")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-7280_dmac_sdhci-v1-1-97af7efd64a1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
