[ Upstream commit ac782f4e3b ]
When a nexthop object is deleted, it is marked as dead and then
fib_table_flush() is called to flush all the routes that are using the
dead nexthop.
The current logic in fib_table_flush() is to only flush error routes
(e.g., blackhole) when it is called as part of network namespace
dismantle (i.e., with flush_all=true). Therefore, error routes are not
flushed when their nexthop object is deleted:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip route add 198.51.100.1/32 nhid 1
# ip route add blackhole 198.51.100.2/32 nhid 1
# ip nexthop del id 1
# ip route show
blackhole 198.51.100.2 nhid 1 dev dummy1
As such, they keep holding a reference on the nexthop object which in
turn holds a reference on the nexthop device, resulting in a reference
count leak:
# ip link del dev dummy1
[ 70.516258] unregister_netdevice: waiting for dummy1 to become free. Usage count = 2
Fix by flushing error routes when their nexthop is marked as dead.
IPv6 does not suffer from this problem.
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Closes: https://lore.kernel.org/netdev/d943f806-4da6-4970-ac28-b9373b0e63ac@I-love.SAKURA.ne.jp/
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20251221144829.197694-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58fc7342b5 ]
There exists a kernel oops caused by a BUG_ON(nhead < 0) at
net/core/skbuff.c:2232 in pskb_expand_head().
This bug is triggered as part of the calipso_skbuff_setattr()
routine when skb_cow() is passed headroom > INT_MAX
(i.e. (int)(skb_headroom(skb) + len_delta) < 0).
The root cause of the bug is due to an implicit integer cast in
__skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure
that delta = headroom - skb_headroom(skb) is never negative, otherwise
we will trigger a BUG_ON in pskb_expand_head(). However, if
headroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, delta
becomes negative, and pskb_expand_head() is passed a negative value for
nhead.
Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing
"negative" headroom sizes to skb_cow() within calipso_skbuff_setattr()
by only using skb_cow() to grow headroom.
PoC:
Using `netlabelctl` tool:
netlabelctl map del default
netlabelctl calipso add pass doi:7
netlabelctl map add default address:0::1/128 protocol:calipso,7
Then run the following PoC:
int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP);
// setup msghdr
int cmsg_size = 2;
int cmsg_len = 0x60;
struct msghdr msg;
struct sockaddr_in6 dest_addr;
struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1,
sizeof(struct cmsghdr) + cmsg_len);
msg.msg_name = &dest_addr;
msg.msg_namelen = sizeof(dest_addr);
msg.msg_iov = NULL;
msg.msg_iovlen = 0;
msg.msg_control = cmsg;
msg.msg_controllen = cmsg_len;
msg.msg_flags = 0;
// setup sockaddr
dest_addr.sin6_family = AF_INET6;
dest_addr.sin6_port = htons(31337);
dest_addr.sin6_flowinfo = htonl(31337);
dest_addr.sin6_addr = in6addr_loopback;
dest_addr.sin6_scope_id = 31337;
// setup cmsghdr
cmsg->cmsg_len = cmsg_len;
cmsg->cmsg_level = IPPROTO_IPV6;
cmsg->cmsg_type = IPV6_HOPOPTS;
char * hop_hdr = (char *)cmsg + sizeof(struct cmsghdr);
hop_hdr[1] = 0x9; //set hop size - (0x9 + 1) * 8 = 80
sendmsg(fd, &msg, 0);
Fixes: 2917f57b6b ("calipso: Allow the lsm to label the skbuff directly.")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Will Rosenberg <whrosenb@asu.edu>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20251219173637.797418-1-whrosenb@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a48e232210 ]
There is a crash issue when running zero copy XDP_TX action, the crash
log is shown below.
[ 216.122464] Unable to handle kernel paging request at virtual address fffeffff80000000
[ 216.187524] Internal error: Oops: 0000000096000144 [#1] SMP
[ 216.301694] Call trace:
[ 216.304130] dcache_clean_poc+0x20/0x38 (P)
[ 216.308308] __dma_sync_single_for_device+0x1bc/0x1e0
[ 216.313351] stmmac_xdp_xmit_xdpf+0x354/0x400
[ 216.317701] __stmmac_xdp_run_prog+0x164/0x368
[ 216.322139] stmmac_napi_poll_rxtx+0xba8/0xf00
[ 216.326576] __napi_poll+0x40/0x218
[ 216.408054] Kernel panic - not syncing: Oops: Fatal exception in interrupt
For XDP_TX action, the xdp_buff is converted to xdp_frame by
xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame
depends on the memory type of the xdp_buff. For page pool based xdp_buff
it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy
XSK pool based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_ORDER0. However, stmmac_xdp_xmit_back() does not check the
memory type and always uses the page pool type, this leads to invalid
mappings and causes the crash. Therefore, check the xdp_buff memory type
in stmmac_xdp_xmit_back() to fix this issue.
Fixes: bba2556efa ("net: stmmac: Enable RX via AF_XDP zero-copy")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20251204071332.1907111-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85f4b0c650 ]
This patch ensures that the RX ring size (rx_pending) is not
set below the permitted length. This avoids UBSAN
shift-out-of-bounds errors when users passes small or zero
ring sizes via ethtool -G.
Fixes: d45d897984 ("octeontx2-pf: Add basic ethtool support")
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Link: https://patch.msgid.link/20251219062226.524844-1-agaur@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e44c42c830 ]
The hp_populate_*_elements_from_package() functions in the hp-bioscfg
driver contain out-of-bounds array access vulnerabilities.
These functions parse ACPI packages into internal data structures using
a for loop with index variable 'elem' that iterates through
enum_obj/integer_obj/order_obj/password_obj/string_obj arrays.
When processing multi-element fields like PREREQUISITES and
ENUM_POSSIBLE_VALUES, these functions read multiple consecutive array
elements using expressions like 'enum_obj[elem + reqs]' and
'enum_obj[elem + pos_values]' within nested loops.
The bug is that the bounds check only validated elem, but did not consider
the additional offset when accessing elem + reqs or elem + pos_values.
The fix changes the bounds check to validate the actual accessed index.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: e6c7b3e155 ("platform/x86: hp-bioscfg: string-attributes")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB788173D7DD4EA2CB6383683DAFB0A@SYBPR01MB7881.ausprd01.prod.outlook.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 665077d78d ]
pds_vfio_dirty_enable() allocates memory for region_info. If
interval_tree_iter_first() returns NULL, the function returns -EINVAL
immediately without freeing the allocated memory, causing a memory leak.
Fix this by jumping to the out_free_region_info label to ensure
region_info is freed.
Fixes: 2e7c6feb4e ("vfio/pds: Add multi-region support")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://lore.kernel.org/r/20251225143150.1117366-1-zilin@seu.edu.cn
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b08fc4d0ec ]
Since commit e7e2941300 ("kbuild: split device tree build rules into
scripts/Makefile.dtbs"), it is no longer possible to compile a device tree
blob that is not specified in a make rule
like:
dtb-$(CONFIG_FOO) += foo.dtb
Before the mentioned commit, one could copy a dts file to e.g.
arch/arm64/boot/dts/ (or a new subdirectory) and then convert it to a dtb
file using:
make ARCH=arm64 foo.dtb
In this scenario, both 'dtb-y' and 'dtb-' are empty, and the inclusion of
scripts/Makefile.dtbs relies on 'targets' to contain the MAKECMDGOALS. The
value of 'targets', however, is only final later in the code.
Move the conditional include of scripts/Makefile.dtbs down to where the
value of 'targets' is final. Since Makefile.dtbs updates 'always-y' which is
used as a prerequisite in the build rule, the build rule also needs to move
down.
Fixes: e7e2941300 ("kbuild: split device tree build rules into scripts/Makefile.dtbs")
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251126100017.1162330-1-thomas.de_schampheleire@nokia.com
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d42bce414d ]
port_fdb_dump() is supposed to only add fdb entries, but we iterate over
the full ARL table, which also includes multicast entries.
So check if the entry is a multicast entry before passing it on to the
callback().
Additionally, the port of those entries is a bitmask, not a port number,
so any included entries would have even be for the wrong port.
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251217205756.172123-1-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c48c0fd0e1 ]
It looks like the buffer allocated and mapped in add_card() is done
with size RCV_BUFFER_SIZE which is 16 KB and 4KB.
Fixes: 286468210d ("firewire: new driver: nosy - IEEE 1394 traffic sniffer")
Co-developed-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Co-developed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20251216165420.38355-2-fourier.thomas@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 472c5dd6b9 ]
When the selftest 'tap.c' is compiled with '-D_FORTIFY_SOURCE=3',
the strcpy() in rtattr_add_strsz() is replaced with a checked
version which causes the test to consistently fail when compiled
with toolchains for which this option is enabled by default.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN tap.test_packet_valid_udp_gso ...
*** buffer overflow detected ***: terminated
# test_packet_valid_udp_gso: Test terminated by assertion
# FAIL tap.test_packet_valid_udp_gso
not ok 1 tap.test_packet_valid_udp_gso
# RUN tap.test_packet_valid_udp_csum ...
*** buffer overflow detected ***: terminated
# test_packet_valid_udp_csum: Test terminated by assertion
# FAIL tap.test_packet_valid_udp_csum
not ok 2 tap.test_packet_valid_udp_csum
# RUN tap.test_packet_crash_tap_invalid_eth_proto ...
*** buffer overflow detected ***: terminated
# test_packet_crash_tap_invalid_eth_proto: Test terminated by assertion
# FAIL tap.test_packet_crash_tap_invalid_eth_proto
not ok 3 tap.test_packet_crash_tap_invalid_eth_proto
# FAILED: 0 / 3 tests passed.
# Totals: pass:0 fail:3 xfail:0 xpass:0 skip:0 error:0
A buffer overflow is detected by the fortified glibc __strcpy_chk()
since the __builtin_object_size() of `RTA_DATA(rta)` is incorrectly
reported as 1, even though there is ample space in its bounding
buffer `req`.
Additionally, given that IFLA_IFNAME also expects a null-terminated
string, callers of rtaddr_add_str{,sz}() could simply use the
rtaddr_add_strsz() variant. (which has been renamed to remove the
trailing `sz`) memset() has been used for this function since it
is unchecked and thus circumvents the issue discussed in the
previous paragraph.
Fixes: 2e64fe4624 ("selftests: add few test cases for tap driver")
Signed-off-by: Alice C. Munduruca <alice.munduruca@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251216170641.250494-1-alice.munduruca@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12cab1191d ]
In async_set_registers(), when usb_submit_urb() fails, the allocated
async_req structure and URB are not freed, causing a memory leak.
The completion callback async_set_reg_cb() is responsible for freeing
these allocations, but it is only called after the URB is successfully
submitted and completes (successfully or with error). If submission
fails, the callback never runs and the memory is leaked.
Fix this by freeing both the URB and the request structure in the error
path when usb_submit_urb() fails.
Reported-by: syzbot+8dd915c7cb0490fc8c52@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8dd915c7cb0490fc8c52
Fixes: 4d12997a9b ("drivers: net: usb: rtl8150: concurrent URB bugfix")
Signed-off-by: Deepakkumar Karn <dkarn@redhat.com>
Link: https://patch.msgid.link/20251216151304.59865-2-dkarn@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df60c332ca ]
During the stress tests, early RX adaptation handshakes can fail, such
as missing the RX_ADAPT ACK or not receiving a coefficient update before
block lock is established. Continuing to retry RX adaptation in this
state is often ineffective if the current mode selection is not viable.
Resetting the RX adaptation retry counter when an RX_ADAPT request fails
to receive ACK or a coefficient update prior to block lock, and clearing
mode_set so the next bring-up performs a fresh mode selection rather
than looping on a likely invalid configuration.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251215151728.311713-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9f96dc59b ]
of_find_net_device_by_node() searches net devices by their /sys/class/net/,
entry. It is documented in its kernel-doc that:
* If successful, returns a pointer to the net_device with the embedded
* struct device refcount incremented by one, or NULL on failure. The
* refcount must be dropped when done with the net_device.
We are missing a put_device(&conduit->dev) which we could place at the
end of dsa_tree_find_first_conduit(). But to explain why calling
put_device() right away is safe is the same as to explain why the chosen
solution is different.
The code is very poorly split: dsa_tree_find_first_conduit() was first
introduced in commit 95f510d0b7 ("net: dsa: allow the DSA master to be
seen and changed through rtnetlink") but was first used several commits
later, in commit acc43b7bf5 ("net: dsa: allow masters to join a LAG").
Assume there is a switch with 2 CPU ports and 2 conduits, eno2 and eno3.
When we create a LAG (bonding or team device) and place eno2 and eno3
beneath it, we create a 3rd conduit (the LAG device itself), but this is
slightly different than the first two.
Namely, the cpu_dp->conduit pointer of the CPU ports does not change,
and remains pointing towards the physical Ethernet controllers which are
now LAG ports. Only 2 things change:
- the LAG device has a dev->dsa_ptr which marks it as a DSA conduit
- dsa_port_to_conduit(user port) finds the LAG and not the physical
conduit, because of the dp->cpu_port_in_lag bit being set.
When the LAG device is destroyed, dsa_tree_migrate_ports_from_lag_conduit()
is called and this is where dsa_tree_find_first_conduit() kicks in.
This is the logical mistake and the reason why introducing code in one
patch and using it from another is bad practice. I didn't realize that I
don't have to call of_find_net_device_by_node() again; the cpu_dp->conduit
association was never undone, and is still available for direct (re)use.
There's only one concern - maybe the conduit disappeared in the
meantime, but the netdev_hold() call we made during dsa_port_parse_cpu()
(see previous change) ensures that this was not the case.
Therefore, fixing the code means reimplementing it in the simplest way.
I am blaming the time of use, since this is what "git blame" would show
if we were to monitor for the conduit's kobject's refcount remaining
elevated instead of being freed.
Tested on the NXP LS1028A, using the steps from
Documentation/networking/dsa/configuration.rst section "Affinity of user
ports to CPU ports", followed by (extra prints added by me):
$ ip link del bond0
mscc_felix 0000:00:00.5 swp3: Link is Down
bond0 (unregistering): (slave eno2): Releasing backup interface
fsl_enetc 0000:00:00.2 eno2: Link is Down
mscc_felix 0000:00:00.5 swp0: bond0 disappeared, migrating to eno2
mscc_felix 0000:00:00.5 swp1: bond0 disappeared, migrating to eno2
mscc_felix 0000:00:00.5 swp2: bond0 disappeared, migrating to eno2
mscc_felix 0000:00:00.5 swp3: bond0 disappeared, migrating to eno2
Fixes: acc43b7bf5 ("net: dsa: allow masters to join a LAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251215150236.3931670-2-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15dd100349 ]
The ibm_rtl_init() function searches for the signature but has a pointer
arithmetic error. The loop counter suggests searching at 4-byte intervals
but the implementation only advances by 1 byte per iteration.
Fix by properly advancing the pointer by sizeof(unsigned int) bytes
each iteration.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 35f0ce032b ("IBM Real-Time "SMI Free" mode driver -v7")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB78812D887A92DE3802D0D06EAFA9A@SYBPR01MB7881.ausprd01.prod.outlook.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1461209cf8 ]
A sysfs group is created in msi_init() when old_ec_model is enabled, but
never removed. Remove the msipf_old_attribute_group in that case.
Fixes: 03696e51d7 ("msi-laptop: Disable brightness control for new EC")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20251217103617.27668-2-fourier.thomas@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f13bce715d ]
Some event names have trailing whitespaces at the end which causes programming
of counters using the name for these specific events to fail and hence need to
be removed.
Fixes: 423c336185 ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://patch.msgid.link/065cbae0717dcc1169681c4dbb1a6e050b8574b3.1766059953.git.shravankr@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db5b4e39c4 ]
Over the years, syzbot found many ways to crash the kernel
in ip6gre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ip6gre device.
[1]
skbuff: skb_under_panic: text:ffffffff8a1d69a8 len:136 put:40 head:ffff888059bc7000 data:ffff888059bc6fe8 tail:0x70 end:0x6c0 dev:team0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:213 !
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ip6gre_header+0xc8/0x790 net/ipv6/ip6_gre.c:1371
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
neigh_output include/net/neighbour.h:556 [inline]
ip6_finish_output2+0xfb3/0x1480 net/ipv6/ip6_output.c:136
__ip6_finish_output net/ipv6/ip6_output.c:-1 [inline]
ip6_finish_output+0x234/0x7d0 net/ipv6/ip6_output.c:220
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reported-by: syzbot+43a2ebcf2a64b1102d64@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/693b002c.a70a0220.33cd7b.0033.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251211173550.2032674-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5498227676 ]
The openvswitch teardown code will immediately call
ovs_netdev_detach_dev() in response to a NETDEV_UNREGISTER notification.
It will then start the dp_notify_work workqueue, which will later end up
calling the vport destroy() callback. This callback takes the RTNL to do
another ovs_netdev_detach_port(), which in this case is unnecessary.
This causes extra pressure on the RTNL, in some cases leading to
"unregister_netdevice: waiting for XX to become free" warnings on
teardown.
We can straight-forwardly avoid the extra RTNL lock acquisition by
checking the device flags before taking the lock, and skip the locking
altogether if the IFF_OVS_DATAPATH flag has already been unset.
Fixes: b07c26511e ("openvswitch: fix vport-netdev unregister")
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20251211115006.228876-1-toke@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1a1a4bade ]
The Aspeed MDIO controller may return incorrect data when a read operation
follows immediately after a write. Due to a controller bug, the subsequent
read can latch stale data, causing the polling logic to terminate earlier
than expected.
To work around this hardware issue, insert a dummy read after each write
operation. This ensures that the next actual read returns the correct
data and prevents premature polling exit.
This workaround has been verified to stabilize MDIO transactions on
affected Aspeed platforms.
Fixes: f160e99462 ("net: phy: Add mdio-aspeed")
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251211-aspeed_mdio_add_dummy_read-v3-1-382868869004@aspeedtech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 252714f1e8 ]
This reverts commit 98921dbd00 ("Bluetooth: Use devm_kzalloc in
btusb.c file").
In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. This
ties the lifetime of all the btusb data to the binding of a driver to
one interface, INTF. In a driver that binds to other interfaces, ISOC
and DIAG, this is an accident waiting to happen.
The issue is revealed in btusb_disconnect(), where calling
usb_driver_release_interface(&btusb_driver, data->intf) will have devm
free the data that is also being used by the other interfaces of the
driver that may not be released yet.
To fix this, revert the use of devm and go back to freeing memory
explicitly.
Fixes: 98921dbd00 ("Bluetooth: Use devm_kzalloc in btusb.c file")
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50fdb78b7c ]
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead.
Fixes: 0a270321db ("[CRYPTO] seqiv: Add Sequence Number IV Generator")
Reported-by: Xiumei Mu <xmu@redhat.com>
Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3d6bbae1d ]
During the IDPF init phase, the mailbox runs in poll mode until it is
configured to properly handle interrupts. The previous delay of 300ms is
excessively long for the mailbox polling mechanism, which causes a slow
initialization of ~2s:
echo 0000:06:12.4 > /sys/bus/pci/drivers/idpf/bind
[ 52.444239] idpf 0000:06:12.4: enabling device (0000 -> 0002)
[ 52.485005] idpf 0000:06:12.4: Device HW Reset initiated
[ 54.177181] idpf 0000:06:12.4: PTP init failed, err=-EOPNOTSUPP
[ 54.206177] idpf 0000:06:12.4: Minimum RX descriptor support not provided, using the default
[ 54.206182] idpf 0000:06:12.4: Minimum TX descriptor support not provided, using the default
Changing the delay to 300us avoids the delays during the initial mailbox
transactions, making the init phase much faster:
[ 83.342590] idpf 0000:06:12.4: enabling device (0000 -> 0002)
[ 83.384402] idpf 0000:06:12.4: Device HW Reset initiated
[ 83.518323] idpf 0000:06:12.4: PTP init failed, err=-EOPNOTSUPP
[ 83.547430] idpf 0000:06:12.4: Minimum RX descriptor support not provided, using the default
[ 83.547435] idpf 0000:06:12.4: Minimum TX descriptor support not provided, using the default
Fixes: 4930fbf419 ("idpf: add core init and interrupt request")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6daa2893f3 ]
There are off-by-one bugs when configuring RSS hash key and lookup
table, causing out-of-bounds reads to memory [1] and out-of-bounds
writes to device registers.
Before commit 43a3d9ba34 ("i40evf: Allow PF driver to configure RSS"),
the loop upper bounds were:
i <= I40E_VFQF_{HKEY,HLUT}_MAX_INDEX
which is safe since the value is the last valid index.
That commit changed the bounds to:
i <= adapter->rss_{key,lut}_size / 4
where `rss_{key,lut}_size / 4` is the number of dwords, so the last
valid index is `(rss_{key,lut}_size / 4) - 1`. Therefore, using `<=`
accesses one element past the end.
Fix the issues by using `<` instead of `<=`, ensuring we do not exceed
the bounds.
[1] KASAN splat about rss_key_size off-by-one
BUG: KASAN: slab-out-of-bounds in iavf_config_rss+0x619/0x800
Read of size 4 at addr ffff888102c50134 by task kworker/u8:6/63
CPU: 0 UID: 0 PID: 63 Comm: kworker/u8:6 Not tainted 6.18.0-rc2-enjuk-tnguy-00378-g3005f5b77652-dirty #156 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: iavf iavf_watchdog_task
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x1a0
iavf_config_rss+0x619/0x800
iavf_watchdog_task+0x2be7/0x3230
process_one_work+0x7fd/0x1420
worker_thread+0x4d1/0xd40
kthread+0x344/0x660
ret_from_fork+0x249/0x320
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 63:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_noprof+0x246/0x6f0
iavf_watchdog_task+0x28fc/0x3230
process_one_work+0x7fd/0x1420
worker_thread+0x4d1/0xd40
kthread+0x344/0x660
ret_from_fork+0x249/0x320
ret_from_fork_asm+0x1a/0x30
The buggy address belongs to the object at ffff888102c50100
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes to the right of
allocated 52-byte region [ffff888102c50100, ffff888102c50134)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x102c50
flags: 0x200000000000000(node=0|zone=2)
page_type: f5(slab)
raw: 0200000000000000 ffff8881000418c0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080200020 00000000f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888102c50000: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
ffff888102c50080: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
>ffff888102c50100: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc
^
ffff888102c50180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
ffff888102c50200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 43a3d9ba34 ("i40evf: Allow PF driver to configure RSS")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6994283421 ]
The maximum number of descriptors supported by the hardware is
hardware-dependent and can be retrieved using
i40e_get_max_num_descriptors(). Move this function to a shared header
and use it when checking for valid ring_len parameter rather than using
hardcoded value.
By fixing an over-acceptance issue, behavior change could be seen where
ring_len could now be rejected while configuring rx and tx queues if its
size is larger than the hardware-dependent maximum number of
descriptors.
Fixes: 55d225670d ("i40e: add validation for ring_len param")
Signed-off-by: Gregory Herrero <gregory.herrero@oracle.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be43abc551 ]
Add service task schedule to set_rx_mode.
In some cases there are error messages printed out in PTP application
(ptp4l):
ptp4l[13848.762]: port 1 (ens2f3np3): received SYNC without timestamp
ptp4l[13848.825]: port 1 (ens2f3np3): received SYNC without timestamp
ptp4l[13848.887]: port 1 (ens2f3np3): received SYNC without timestamp
This happens when service task would not run immediately after
set_rx_mode, and we need it for setup tasks. This service task checks, if
PTP RX packets are hung in firmware, and propagate correct settings such
as multicast address for IEEE 1588 Precision Time Protocol.
RX timestamping depends on some of these filters set. Bug happens only
with high PTP packets frequency incoming, and not every run since
sometimes service task is being ran from a different place immediately
after starting ptp4l.
Fixes: 0e4425ed64 ("i40e: fix: do not sleep in netdev_ops")
Reviewed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a519be2f5d ]
When userspace brings down and deletes a non-transmitted profile,
it is expected to send a new updated Beacon template for the
transmitted profile of that multiple BSSID (MBSSID) group which
does not include the removed profile in MBSSID element. This
update comes via NL80211_CMD_SET_BEACON.
Such updates work well as long as the group continues to have at
least one non-transmitted profile as NL80211_ATTR_MBSSID_ELEMS
is included in the new Beacon template.
But when the last non-trasmitted profile is removed, it still
gets included in Beacon templates sent to driver. This happens
because when no MBSSID elements are sent by the userspace,
ieee80211_assign_beacon() ends up using the element stored from
earlier Beacon template.
Do not copy old MBSSID elements, instead userspace should always
include these when applicable.
Fixes: 2b3171c6fe ("mac80211: MBSSID beacon handling in AP mode")
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215174656.2866319-2-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b77b9551d ]
The QGenie AI code review tool says we should store the capped length to
wdev->u.client.ssid_len. The AI is correct.
Fixes: 62b635dcd6 ("wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aTAbp5RleyH_lnZE@stanley.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd39edb445 ]
TID getting from ieee80211_get_tid() might be out of range of array size
of sta_entry->tids[], so check TID is less than MAX_TID_COUNT. Othwerwise,
UBSAN warn:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:514:30
index 10 is out of range for type 'rtl_tid_data [9]'
Fixes: 8ca4cdef93 ("wifi: rtlwifi: rtl8192cu: Fix TX aggregation")
Signed-off-by: Morning Star <alexbestoso@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1764232628-13625-1-git-send-email-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bd5603eaae upstream.
Commit e26ee4efbc ("fuse: allocate ff->release_args only if release is
needed") skips allocating ff->release_args if the server does not
implement open. However in doing so, fuse_prepare_release() now skips
grabbing the reference on the inode, which makes it possible for an
inode to be evicted from the dcache while there are inflight readahead
requests. This causes a deadlock if the server triggers reclaim while
servicing the readahead request and reclaim attempts to evict the inode
of the file being read ahead. Since the folio is locked during
readahead, when reclaim evicts the fuse inode and fuse_evict_inode()
attempts to remove all folios associated with the inode from the page
cache (truncate_inode_pages_range()), reclaim will block forever waiting
for the lock since readahead cannot relinquish the lock because it is
itself blocked in reclaim:
>>> stack_trace(1504735)
folio_wait_bit_common (mm/filemap.c:1308:4)
folio_lock (./include/linux/pagemap.h:1052:3)
truncate_inode_pages_range (mm/truncate.c:336:10)
fuse_evict_inode (fs/fuse/inode.c:161:2)
evict (fs/inode.c:704:3)
dentry_unlink_inode (fs/dcache.c:412:3)
__dentry_kill (fs/dcache.c:615:3)
shrink_kill (fs/dcache.c:1060:12)
shrink_dentry_list (fs/dcache.c:1087:3)
prune_dcache_sb (fs/dcache.c:1168:2)
super_cache_scan (fs/super.c:221:10)
do_shrink_slab (mm/shrinker.c:435:9)
shrink_slab (mm/shrinker.c:626:10)
shrink_node (mm/vmscan.c:5951:2)
shrink_zones (mm/vmscan.c:6195:3)
do_try_to_free_pages (mm/vmscan.c:6257:3)
do_swap_page (mm/memory.c:4136:11)
handle_pte_fault (mm/memory.c:5562:10)
handle_mm_fault (mm/memory.c:5870:9)
do_user_addr_fault (arch/x86/mm/fault.c:1338:10)
handle_page_fault (arch/x86/mm/fault.c:1481:3)
exc_page_fault (arch/x86/mm/fault.c:1539:2)
asm_exc_page_fault+0x22/0x27
Fix this deadlock by allocating ff->release_args and grabbing the
reference on the inode when preparing the file for release even if the
server does not implement open. The inode reference will be dropped when
the last reference on the fuse file is dropped (see fuse_file_put() ->
fuse_release_end()).
Fixes: e26ee4efbc ("fuse: allocate ff->release_args only if release is needed")
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reported-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de83d4617f upstream.
The driver is dropping the references taken to the larb devices during
probe after successful lookup as well as on errors. This can
potentially lead to a use-after-free in case a larb device has not yet
been bound to its driver so that the iommu driver probe defers.
Fix this by keeping the references as expected while the iommu driver is
bound.
Fixes: 2659392856 ("iommu/mediatek: Add error path for loop of mm_dts_parse")
Cc: stable@vger.kernel.org
Cc: Yong Wu <yong.wu@mediatek.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0edc78b82b ]
Luigi reported that retriggering a posted MSI interrupt does not work
correctly.
The reason is that the retrigger happens at the vector domain by sending an
IPI to the actual vector on the target CPU. That works correctly exactly
once because the posted MSI interrupt chip does not issue an EOI as that's
only required for the posted MSI notification vector itself.
As a consequence the vector becomes stale in the ISR, which not only
affects this vector but also any lower priority vector in the affected
APIC because the ISR bit is not cleared.
Luigi proposed to set the vector in the remap PIR bitmap and raise the
posted MSI notification vector. That works, but that still does not cure a
related problem:
If there is ever a stray interrupt on such a vector, then the related
APIC ISR bit becomes stale due to the lack of EOI as described above.
Unlikely to happen, but if it happens it's not debuggable at all.
So instead of playing games with the PIR, this can be actually solved
for both cases by:
1) Keeping track of the posted interrupt vector handler state
2) Implementing a posted MSI specific irq_ack() callback which checks that
state. If the posted vector handler is inactive it issues an EOI,
otherwise it delegates that to the posted handler.
This is correct versus affinity changes and concurrent events on the posted
vector as the actual handler invocation is serialized through the interrupt
descriptor lock.
Fixes: ed1e48ea43 ("iommu/vt-d: Enable posted mode for device MSIs")
Reported-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Luigi Rizzo <lrizzo@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251125214631.044440658@linutronix.de
Closes: https://lore.kernel.org/lkml/20251124104836.3685533-1-lrizzo@google.com
[ DEFINE_PER_CPU_CACHE_HOT => DEFINE_PER_CPU ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07272e883f upstream.
The macros FAN_FROM_REG and TEMP_FROM_REG evaluate their arguments
multiple times. When used in lockless contexts involving shared driver
data, this causes Time-of-Check to Time-of-Use (TOCTOU) race
conditions.
Convert the macros to static functions. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: 85f03bccd6 ("hwmon: Add support for Winbond W83L786NG/NR")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251128123816.3670-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 670d7ef945 upstream.
The macro FAN_FROM_REG evaluates its arguments multiple times. When used
in lockless contexts involving shared driver data, this leads to
Time-of-Check to Time-of-Use (TOCTOU) race conditions, potentially
causing divide-by-zero errors.
Convert the macro to a static function. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Additionally, in store_fan_div, move the calculation of the minimum
limit inside the update lock. This ensures that the read-modify-write
sequence operates on consistent data.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: 9873964d6e ("[PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791D")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251202180105.12842-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02f0ad8e8d upstream.
The i2c regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 3a2a8cc3fe ("hwmon: (max6697) Convert to use regmap")
Cc: stable@vger.kernel.org # 6.12
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251127134351.1585-1-johan@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8d5acdcf5 upstream.
In max16065_current_show, data->curr_sense is read twice: once for the
error check and again for the calculation. Since
i2c_smbus_read_byte_data returns negative error codes on failure, if the
data changes to an error code between the check and the use, ADC_TO_CURR
results in an incorrect calculation.
Read data->curr_sense into a local variable to ensure consistency. Note
that data->curr_gain is constant and safe to access directly.
This aligns max16065_current_show with max16065_input_show, which
already uses a local variable for the same reason.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: f5bae2642e ("hwmon: Driver for MAX16065 System Manager and compatibles")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251128124709.3876-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 295f58fdcc upstream.
As like other SDX SoCs, SDX75 SoC's QPIC BCM resource was modeled as a
RPMh clock in clk-rpmh driver. However, for SDX75, this resource was also
described as an interconnect and BCM node mistakenly. It is incorrect to
describe the same resource in two different providers, as it will lead to
votes from clients overriding each other.
Hence, drop the QPIC interconnect and BCM nodes and let the clients use
clk-rpmh driver to vote for this resource.
Without this change, the NAND driver fails to probe on SDX75, as the
interconnect sync state disables the QPIC nodes as there were no clients
voting for this ICC resource. However, the NAND driver had already voted
for this BCM resource through the clk-rpmh driver. Since both votes come
from Linux, RPMh was unable to distinguish between these two and ends up
disabling the QPIC resource during sync state.
Cc: stable@vger.kernel.org
Fixes: 3642b4e5cb ("interconnect: qcom: Add SDX75 interconnect provider driver")
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
[mani: dropped the reference to bcm_qp0, reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-1-20d6820e455c@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6ee6aac66 upstream.
In i2c_amd_probe(), amd_mp2_find_device() utilizes
driver_find_next_device() which internally calls driver_find_device()
to locate the matching device. driver_find_device() increments the
reference count of the found device by calling get_device(), but
amd_mp2_find_device() fails to call put_device() to decrement the
reference count before returning. This results in a reference count
leak of the PCI device each time i2c_amd_probe() is executed, which
may prevent the device from being properly released and cause a memory
leak.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 529766e0a0 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251022095402.8846-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 527250cd90 upstream.
Members of struct software_node_ref_args should not be dereferenced
directly but set using the provided macros. Commit d7cdbbc93c
("software node: allow referencing firmware nodes") changed the name of
the software node member and caused a build failure. Remove all direct
dereferences of the ref struct as a fix.
However, this driver also seems to abuse the software node interface by
waiting for a node with an arbitrary name "intel-xhci-usb-sw" to appear
in the system before setting up the reference for the I2C device, while
the actual software node already exists in the intel-xhci-usb-role-switch
module and should be used to set up a static reference. Add a FIXME for
a future improvement.
Fixes: d7cdbbc93c ("software node: allow referencing firmware nodes")
Fixes: 53c24c2932 ("platform/x86: intel_cht_int33fe: use inline reference properties")
Cc: stable@vger.kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20251121111534.7cdbfe5c@canb.auug.org.au/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a53e356df5 upstream.
While testing rpmsg-char interface it was noticed that duplicate sysfs
entries are getting created and below warning is noticed.
Reason for this is that we are leaking rpmsg device pointer, setting it
null without actually unregistering device.
Any further attempts to unregister fail because rpdev is NULL,
resulting in a leak.
Fix this by unregistering rpmsg device before removing its reference
from rpmsg channel.
sysfs: cannot create duplicate filename '/devices/platform/soc@0/3700000.remot
eproc/remoteproc/remoteproc1/3700000.remoteproc:glink-edge/3700000.remoteproc:
glink-edge.adsp_apps.-1.-1'
[ 114.115347] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not
tainted 6.16.0-rc4 #7 PREEMPT
[ 114.115355] Hardware name: Qualcomm Technologies, Inc. Robotics RB3gen2 (DT)
[ 114.115358] Workqueue: events qcom_glink_work
[ 114.115371] Call trace:8
[ 114.115374] show_stack+0x18/0x24 (C)
[ 114.115382] dump_stack_lvl+0x60/0x80
[ 114.115388] dump_stack+0x18/0x24
[ 114.115393] sysfs_warn_dup+0x64/0x80
[ 114.115402] sysfs_create_dir_ns+0xf4/0x120
[ 114.115409] kobject_add_internal+0x98/0x260
[ 114.115416] kobject_add+0x9c/0x108
[ 114.115421] device_add+0xc4/0x7a0
[ 114.115429] rpmsg_register_device+0x5c/0xb0
[ 114.115434] qcom_glink_work+0x4bc/0x820
[ 114.115438] process_one_work+0x148/0x284
[ 114.115446] worker_thread+0x2c4/0x3e0
[ 114.115452] kthread+0x12c/0x204
[ 114.115457] ret_from_fork+0x10/0x20
[ 114.115464] kobject: kobject_add_internal failed for 3700000.remoteproc:
glink-edge.adsp_apps.-1.-1 with -EEXIST, don't try to register things with
the same name in the same directory.
[ 114.250045] rpmsg 3700000.remoteproc:glink-edge.adsp_apps.-1.-1:
device_add failed: -17
Fixes: 835764ddd9 ("rpmsg: glink: Move the common glink protocol implementation to glink_native.c")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250822100043.2604794-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32200f4828 upstream.
Make sure to drop the reference taken to the canvas platform device when
looking up its driver data.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Also note that commit 28f851e6af ("soc: amlogic: canvas: add missing
put_device() call in meson_canvas_get()") fixed the leak in a lookup
error path, but the reference is still leaking on success.
Fixes: d4983983d9 ("soc: amlogic: add meson-canvas driver")
Cc: stable@vger.kernel.org # 4.20: 28f851e6af
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250926142454.5929-2-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f401671e90 upstream.
Make sure to drop the reference taken to the mbox platform device when
looking up its driver data.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 6e1457fcad ("soc: apple: mailbox: Add ASC/M3 mailbox driver")
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5c16ea57b upstream.
Make sure to drop the reference taken to the ocmem platform device when
looking up its driver data.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Also note that commit 0ff027027e ("soc: qcom: ocmem: Fix missing
put_device() call in of_get_ocmem") fixed the leak in a lookup error
path, but the reference is still leaking on success.
Fixes: 88c1e9404f ("soc: qcom: add OCMEM driver")
Cc: stable@vger.kernel.org # 5.5: 0ff027027e
Cc: Brian Masney <bmasney@redhat.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250926143511.6715-2-johan@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94124bf253 upstream.
Make sure to drop the reference taken to the pbs platform device when
looking up its driver data.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 5b2dd77be1 ("soc: qcom: add QCOM PBS driver")
Cc: stable@vger.kernel.org # 6.9
Cc: Anjelique Melendez <quic_amelende@quicinc.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250926143511.6715-3-johan@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
