Add additional properties for ports supporting sink mode. The properties
define certain hardware and electrical properties such as sink load
step, sink load characteristics, sink compliance and charging adapter
Power Delivery Profile (PDP) for the connector. These properties need to
be defined for a Type-C port in compliance with the PD 3.1 spec.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260223-skedb-v2-1-60675765bc7e@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move VID field to chip info to accommodate different VIDs.
Add chip info for Etek Micro ET7304. ET7304 is functionally
identical to the Richtek RT1715, with the only difference
being the VID.
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260220-et7304-v3-2-ede2d9634957@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the ETEK Micro ET7304 USB Type-C Port Controller with USB-PD.
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-et7304-v3-1-ede2d9634957@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-7-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-6-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-5-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-4-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-3-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-2-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some devices use combo PHYs (i.e. USB3 + DisplayPort), which also
handle the lane muxing. These PHYs are referenced twice from
the USB-C connector (USB super-speed lines and SBU/AUX lines)
resulting in the mux being configured twice. Avoid this by
dropping duplicates.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260223-typec-mux-duplication-fix-v2-2-0402fefc222e@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some devices use combo PHYs (i.e. USB3 + DisplayPort), which also
handle the orientation mux. These PHYs are referenced twice from
the USB-C connector (USB super-speed lines and SBU/AUX lines)
resulting in the switch being configured twice. Avoid this by
dropping duplicates.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260223-typec-mux-duplication-fix-v2-1-0402fefc222e@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable tps->partner is checked for an error pointer and then if it
is, it sends an error message but does not return and then immediately
dereferenced a few lines below:
tps->partner = typec_register_partner(tps->port, &desc);
if (IS_ERR(tps->partner))
dev_warn(tps->dev, "%s: failed to register partnet\n", __func__);
if (desc.identity) {
typec_partner_set_identity(tps->partner);
cd321x->cur_partner_identity = st.partner_identity;
}
Add early return and fix spelling mistake in error message.
Detected by Smatch:
drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error:
'tps->partner' dereferencing possible ERR_PTR()
Fixes: 82432bbfb9 ("usb: typec: tipd: Handle mode transitions for CD321x")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260218214621.38154-1-ethantidmore06@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
File-scope 'tcpci_pm_ops' is not used outside of this unit, so make it
static to silence sparse warning:
tcpm/tcpci.c:1002:1: warning: symbol 'tcpci_pm_ops' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260216110403.159945-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ucsi_run_command trace event is exposed in tracefs, but it never
produces any output because the UCSI core never invokes the associated
tracepoint. As a result, enabling the event under events/ucsi/ yields
no traces, preventing users from inspecting UCSI command sequencing.
Wire the tracepoint into the UCSI command path so that commands are
properly reported.
Example:
50.692342: ucsi_run_command: GET_CONNECTOR_STATUS -> OK (err=0)
50.692345: ucsi_connector_change: port0 status: change=4800, ...
51.750298: ucsi_run_command: GET_CABLE_PROPERTY -> FAIL (err=-5)
51.773360: ucsi_run_command: GET_CONNECTOR_STATUS -> OK (err=0)
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260217103403.1956-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the controllers found of these platforms can be tied up to a
single high-speed PHY, basically rendering them as USB 2.0 controllers.
So in this case, the interrupt to the Synopsys DesignWare Core is coming
from the high-speed PHY, so allow the interrupt to reflect that.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Tested-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Link: https://patch.msgid.link/20260309-dts-qcom-glymur-add-usb-support-v4-1-6bdc41f58d18@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch warns that __dwc3_gadget_kick_transfer() might be missing an
error code when returning 'ret' at line 1691.
While 'ret' is guaranteed to be 0 at this point, returning an explicit 0
improves readability by removing a level of indirection and clarifies
the intent that this is a successful "no-op" path. This change also
silences the Smatch warning.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Zeeshan Ahmad <zeeshanahmad022019@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260306090643.47383-1-zeeshanahmad022019@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The platform_get_irq_byname_optional() function returns a non-zero
IRQ number on success and a negative error code on failure. It
never returns zero.
The current implementation in the modern dwc3-qcom driver checks for
a return value less than or equal to zero. Since zero is not a
valid return value, simplify the check to only look for negative
error codes. This aligns the logic with the standard return contract
of the platform IRQ APIs.
Signed-off-by: Zeeshan Ahmad <zeeshanahmad022019@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260225065157.8952-1-zeeshanahmad022019@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111511.18386-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111511.18386-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface while it is bound to
a driver and there is no need to take another reference unless the
interface is needed after disconnect.
Drop the redundant interface reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260305111511.18386-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111511.18386-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111511.18386-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It should be 'HighSpeed' instead of 'HishSpeed'.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260304113916.856841-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add '*' to needs_full_reinit comment line to fix a kernel-doc issue.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260304113916.856841-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to use fusb302 based USB-C connectors with the DP altmode
helper code on devicetree based platforms. To get this working there
must be a DRM bridge chain from the DisplayPort controller to the USB-C
connector. E.g. on Rockchip RK3576:
root@rk3576 # cat /sys/kernel/debug/dri/0/encoder-0/bridges
bridge[0]: dw_dp_bridge_funcs
refcount: 7
type: [10] DP
OF: /soc/dp@27e40000:rockchip,rk3576-dp
ops: [0x47] detect edid hpd
bridge[1]: drm_aux_bridge_funcs
refcount: 4
type: [0] Unknown
OF: /soc/phy@2b010000:rockchip,rk3576-usbdp-phy
ops: [0x0]
bridge[2]: drm_aux_hpd_bridge_funcs
refcount: 5
type: [10] DP
OF: /soc/i2c@2ac50000/typec-portc@22/connector:usb-c-connector
ops: [0x4] hpd
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260310-fusb302-drm-dp-hpd-bridge-v1-1-ffd41ef9afe3@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplifies allocation and allows using __counted_by for extra runtime
analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20260306031639.46942-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Microchip USB3340x ULPI PHY requires a delay when switching to the
high-speed transmitter. See:
http://ww1.microchip.com/downloads/en/DeviceDoc/80000645A.pdf
Module 2 "Device Enumeration Failure with Link IP Systems"
For details on the behavior and fix, refer to the AMD (formerly Xilinx)
forum post: "USB stuck in full speed mode with USB3340 ULPI PHY, ZynqMP."
This patch uses the USB PHY Vendor-ID and Product-ID to detect the
USB3340 PHY and then applies the necessary fix if this PHY is found.
Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260305121452.54082-2-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a regulator-only entry matching OF-described USB Type-A connectors.
This allows platforms to explicitly model VBUS supply regulators for these
ports instead of calling them PHY supplies or making the respective
regulators always-on in their device trees.
Type-A ports won't typically need a dedicated driver, as there is nothing
to configure apart from the power supply, so there is no controller driver
to traverse the OF graph and request the VBUS regulator, unlike for Type-C
ports. Thus make it an onboard USB device, which it kind of really is.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260217-typea-vbus-v1-1-657b4e55a4c2@flipper.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the USB core code handles the generic USB PHYs automatically, the
optional PHY handling code has been removed from the 'ehci-orion' driver
entirely by commit e04585184d ("usb: ehci-orion: avoid double PHY
initialization"). However, the devm_phy_optional_get() call has been kept
so the driver still gets the PHY even though it is not used for anything
in the driver.
Drop the remaining code, and also remove the 'phy' member of the
'orion_ehci_hcd' structure to simplify the code.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260221-ehci-orion-drop-phy-handling-v2-1-5e26aa73790b@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The musb IP on mpfs and pic64gx has a reset pin, but until now this has
been undocumented because platform firmware takes the block out of reset
on first-party boards (or those using modified versions of the vendor
firmware), but not all boards may take this approach. Permit providing a
reset in devicetree for Linux, or other devicetree-consuming software,
to use.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260303-backspace-unhearing-c6cc8cbddbba@spud
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the PHY subsystem already synchronizes concurrent accesses to a PHY
instance with a core-internal mutex remove the driver specific mutex
synchronization.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://patch.msgid.link/20260127-diogo-tegra_phy-v2-2-787b9eed3ed5@tecnico.ulisboa.pt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reference usb-xhci.yaml in host mode in order to support on-board USB
hubs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260226153859.665901-2-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX USB glue and DWC3 core are closely coupled. Describe the i.MX
USB block in a single block will bring more benefits than a parent-
child relation. To support the flatten model devicetree, DWC3 USB core
driver already support to directly register and initialize the core in
glue layer using one device. And many notification can be received in
glue layer timely and proper actions can be executed accordingly.
To align with mainstream, introduce a new driver to support flatten dwc3
devicetree model for i.MX Soc. Besides this driver disables wakeup irq
when system is active, no other function change in this version compared
to dwc3-imx8mp.c. After this new driver is settled, only maintenance
fixes will be added to dwc3-imx8mp.c, new features will only be added
to this new driver. Once all users switch to this new one, the legacy
driver will be removed at proper time.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260212-add-flatten-dts-based-dwc3-imx-driver-v5-3-ff04a75ce221@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current design assumes that the controller remains powered when wakeup
is enabled. However, some SoCs provide wakeup capability even when the
controller itself is powered down, using separate dedicated wakeup logic.
This allows additional power savings, but requires the controller to be
fully re‑initialized after system resume.
To support these SoCs, introduce a flag needs_full_reinit for the purpose.
And the glue layer needs to indicate if the controller needs this behavior
by setting a same flag needs_full_reinit in dwc3_properties.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260212-add-flatten-dts-based-dwc3-imx-driver-v5-2-ff04a75ce221@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX USB glue and DWC3 core are closely coupled. Describe the i.MX
USB block in a single block will bring more benefits than a parent-child
relation. The new binding is used to describe flattened usb controller
node. It's a copy of the legacy binding fsl,imx8mp-dwc3.yaml with the
needed modifications.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260212-add-flatten-dts-based-dwc3-imx-driver-v5-1-ff04a75ce221@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert OMAP DWC3 USB Glue Layer binding to DT schema.
Changes made during the conversion:
- Drop the ti,hwmods property, as it is not used by any in-tree DTS files.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260127-ti-usb-v2-2-9dd6a65b43df@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert OMAP MUSB USB OTG Controller binding to DT schema.
Changes during conversion:
- Include "interrupts" and "interrupt-names" properties in the YAML, as
they are used by many in-tree DTS files.
- Extend the "power" property to allow the value 150 (in addition to
existing values), since this is present in several in-tree DTS examples.
- Drop the ti,hwmods property, as it is not used by any in-tree DTS files.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260127-ti-usb-v2-1-9dd6a65b43df@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaZtg+xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOKwQ+AQCiXEYAibl3vHRgQo7qEPCC5or4FtkF
HZ0ERRArhsU17AD/TKHE/AJkyFrwK4rGTb6I9Wi1OXnpG7jihZlYjj03Ag4=
=CUql
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fixes from Eric Biggers:
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: fix build error by adding fsverity_readahead() stub
fsverity: remove fsverity_verify_page()
f2fs: make f2fs_verify_cluster() partially large-folio-aware
f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster()
