When we got an error from DMA mapping API we convert a negative value
to unsigned long type and hence make user confused:
result #1: 'src mapping error' with src_off=0x19a72 dst_off=0xea len=0xccf4 (18446744073709551604)
Change this to print error codes as signed values.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200907101306.61824-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Because a callback is called twice when DMA transfer complete
the second callback may be possible to access a freed memory
if the first callback routines perform the dma_release_channel function.
So this patch serialized the callback functions
Signed-off-by: Brad Kim <brad.kim@semifive.com>
Tested-and-reviewed-by: Green Wan <green.wan@sifive.com>
Signed-off-by: Brad Kim <brad.kim@sifive.com>
Link: https://lore.kernel.org/r/20200903111726.3413-1-brad.kim@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Export admin command status to sysfs attribute in order to allow user to
retrieve configuration error. Allows user tooling to retrieve the command
error and provide more user friendly error messages.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865278770.29455.8026892329182750127.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add sysfs attribute max_batch_size to wq in order to allow the max batch
size configured on a per wq basis. Add support code to configure
the valid user input on wq enable. This is a performance tuning
parameter.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865273617.29141.4383066301730821749.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add sysfs attribute max_xfer_size to wq in order to allow the max xfer
size configured on a per wq basis. Add support code to configure
the valid user input on wq enable. This is a performance tuning
parameter.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865265404.29141.3049399618578194052.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828152637.16903-3-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828152637.16903-2-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828152637.16903-1-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Split IS_ERR_OR_NULL() check followed by additional conditional
to two simple conditionals. This increases readability and saves memory:
Function old new delta
dma_request_chan 700 697 -3
Total: Before=10224, After=10221, chg -0.03%
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200828144519.14483-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New drivers should use dma_request_chan() instead
dma_request_slave_channel()
dma_request_slave_channel() is a simple wrapper for dma_request_chan()
eating up the error code for channel request failure and makes deferred
probing impossible.
Move the dma_request_slave_channel() into the header as inline function,
mark it as deprecated.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200828110507.22407-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Starting with core version 4.3.a the DMA bus attributes can (and should) be
read from the INTERFACE_DESCRIPTION (0x10) register.
For older core versions, this will still need to be provided from the
device-tree.
The bus-type values are identical to the ones stored in the device-trees,
so we just need to read them. Bus-width values are stored in log2 values,
so we just need to use them as shift values to make them equivalent to the
current format.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200825151950.57605-7-alexandru.ardelean@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The channel parameters (which are read from the device-tree) are adjusted
for the DMAEngine framework in the axi_dmac_parse_chan_dt() function, after
they are read from the device-tree.
When we want to read these from registers, we will need to use the same
logic, so this change splits the logic into a separate function.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200825151950.57605-6-alexandru.ardelean@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The clock may also be required to read registers from the IP core (if it is
provided and the driver needs to control it).
So, move it earlier in the probe.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200825151950.57605-4-alexandru.ardelean@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We want to enable the clock right after it is obtained. Then later we'll
want to read the core version via register-access (which requires the clock
to be enabled).
The initialization of the active_descs list can be postponed after reading
from registers (or reading the device-tree).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200825151950.57605-3-alexandru.ardelean@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The 'version' of the IP core will be needed to adapt the driver to a new
feature (i.e. reading some DMA parameters from registers).
To do that, the version will be checked, so this is being moved out of the
axi_dmac_detect_caps() function.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200825151950.57605-2-alexandru.ardelean@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instruction dump uses two printk() in a row to print one instruction. Use
KERN_CONT to prevent breaking the output in the middle.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20200813204123.19044-1-l.stelmach@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The direction has been already validated in the main callback and there is
no need to check it again in the TR mode handlers for slave_sg and cyclic.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200824120120.9270-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sparse tool complains as follows:
drivers/dma/xilinx/xilinx_dpdma.c:349:37: warning:
symbol 'dpdma_debugfs_reqs' was not declared. Should it be static?
This variable is not used outside of xilinx_dpdma.c, so this commit
marks it static.
Fixes: 1d220435ca ("dmaengine: xilinx: dpdma: Add debugfs support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200818112217.43816-1-weiyongjun1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DW DMA IP-core provides a way to synthesize the DMA controller with
channels having different parameters like maximum burst-length,
multi-block support, maximum data width, etc. Those parameters both
explicitly and implicitly affect the channels performance. Since DMA slave
devices might be very demanding to the DMA performance, let's provide a
functionality for the slaves to be assigned with DW DMA channels, which
performance according to the platform engineer fulfill their requirements.
After this patch is applied it can be done by passing the mask of suitable
DMA-channels either directly in the dw_dma_slave structure instance or as
a fifth cell of the DMA DT-property. If mask is zero or not provided, then
there is no limitation on the channels allocation.
For instance Baikal-T1 SoC is equipped with a DW DMAC engine, which first
two channels are synthesized with max burst length of 16, while the rest
of the channels have been created with max-burst-len=4. It would seem that
the first two channels must be faster than the others and should be more
preferable for the time-critical DMA slave devices. In practice it turned
out that the situation is quite the opposite. The channels with
max-burst-len=4 demonstrated a better performance than the channels with
max-burst-len=16 even when they both had been initialized with the same
settings. The performance drop of the first two DMA-channels made them
unsuitable for the DW APB SSI slave device. No matter what settings they
are configured with, full-duplex SPI transfers occasionally experience the
Rx FIFO overflow. It means that the DMA-engine doesn't keep up with
incoming data pace even though the SPI-bus is enabled with speed of 25MHz
while the DW DMA controller is clocked with 50MHz signal. There is no such
problem has been noticed for the channels synthesized with
max-burst-len=4.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200731200826.9292-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to the DW DMA controller Databook 2.18b (page 40 "3.5 Memory
Peripherals") memory peripherals don't have handshaking interface
connected to the controller, therefore they can never be a flow
controller. Since the CTLx.SRC_MSIZE and CTLx.DEST_MSIZE are properties
valid only for peripherals with a handshaking interface, we can freely
zero these fields out if the memory peripheral is selected to be the
source or the destination of the DMA transfers.
Note according to the databook, length of burst transfers to memory is
always equal to the number of data items available in a channel FIFO or
data items required to complete the block transfer, whichever is smaller;
length of burst transfers from memory is always equal to the space
available in a channel FIFO or number of data items required to complete
the block transfer, whichever is smaller.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200731200826.9292-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Indeed in case of the DMA_DEV_TO_MEM DMA transfers it's enough to take the
destination memory address and the destination master data width into
account to calculate the CTLx.DST_TR_WIDTH setting of the memory
peripheral. According to the DW DMAC IP-core Databook 2.18b (page 66,
Example 5) at the and of a DMA transfer when the DMA-channel internal FIFO
is left with data less than for a single destination burst transaction,
the destination peripheral will enter the Single Transaction Region where
the DW DMA controller can complete a block transfer to the destination
using single transactions (non-burst transaction of CTLx.DST_TR_WIDTH
bytes). If there is no enough data in the DMA-channel internal FIFO for
even a single non-burst transaction of CTLx.DST_TR_WIDTH bytes, then the
channel enters "FIFO flush mode". That mode is activated to empty the FIFO
and flush the leftovers out to the memory peripheral. The flushing
procedure is simple. The data is sent to the memory by means of a set of
single transaction of CTLx.SRC_TR_WIDTH bytes. To sum up it's redundant to
use the LLPs length to find out the CTLx.DST_TR_WIDTH parameter value,
since each DMA transfer will be completed with the CTLx.SRC_TR_WIDTH bytes
transaction if it is required.
We suggest to remove the LLP entry length from the statement which
calculates the memory peripheral DMA transaction width since it's
redundant due to the feature described above. By doing so we'll improve
the memory bus utilization and speed up the DMA-channel performance for
DMA_DEV_TO_MEM DMA-transfers.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200731200826.9292-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
CFGx.FIFO_MODE field controls a DMA-controller "FIFO readiness" criterion.
In other words it determines when to start pushing data out of a DW
DMAC channel FIFO to a destination peripheral or from a source
peripheral to the DW DMAC channel FIFO. Currently FIFO-mode is set to one
for all DW DMAC channels. It means they are tuned to flush data out of
FIFO (to a memory peripheral or by accepting the burst transaction
requests) when FIFO is at least half-full (except at the end of the block
transfer, when FIFO-flush mode is activated) and are configured to get
data to the FIFO when it's at least half-empty.
Such configuration is a good choice when there is no slave device involved
in the DMA transfers. In that case the number of bursts per block is less
than when CFGx.FIFO_MODE = 0 and, hence, the bus utilization will improve.
But the latency of DMA transfers may increase when CFGx.FIFO_MODE = 1,
since DW DMAC will wait for the channel FIFO contents to be either
half-full or half-empty depending on having the destination or the source
transfers. Such latencies might be dangerous in case if the DMA transfers
are expected to be performed from/to a slave device. Since normally
peripheral devices keep data in internal FIFOs, any latency at some
critical moment may cause one being overflown and consequently losing
data. This especially concerns a case when either a peripheral device is
relatively fast or the DW DMAC engine is relatively slow with respect to
the incoming data pace.
In order to solve problems, which might be caused by the latencies
described above, let's enable the FIFO half-full/half-empty "FIFO
readiness" criterion only for DMA transfers with no slave device involved.
Thanks to the commit 99ba8b9b0d ("dmaengine: dw: Initialize channel
before each transfer") we can freely do that in the generic
dw_dma_initialize_chan() method.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200731200826.9292-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Each DW DMA controller channel can be synthesized with different
parameters like maximum burst-length, multi-block support, maximum data
width, etc. Most of these parameters determine the DW DMAC channels
performance in its own aspect. On the other hand these parameters can
be implicitly responsible for the channels performance degradation
(for instance multi-block support is a very useful feature, but having
it disabled during the DW DMAC synthesize will provide a more optimized
core). Since DMA slave devices may have critical dependency on the DMA
engine performance, let's provide a way for the slave devices to have
the DMA-channels allocated from a pool of the channels, which according
to the system engineer fulfill their performance requirements.
The pool is determined by a mask optionally specified in the fifth
DMA-cell of the DMA DT-property. If the fifth cell is omitted from the
phandle arguments or the mask is zero, then the allocation will be
performed from a set of all channels provided by the DMA controller.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200731200826.9292-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The security accelerator within MCU domain supports two ports similarly
to the SA2UL in MAIN domain.
Add endpoint configuration for the two ingress and one egress threads of
the second port.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200803100724.19003-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add new PSI-L map file for the new TI j7200 SoC.
The DMA hardware in j7200 is the same as in j721e with different
set of peripherals resulting different PSI-L thread map compered
to j721e.
See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200803125713.17829-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of separate of_machine_is_compatible() it is better to use
soc_device_match() and soc_device_attribute struct to get the PSI-L map
for the booted device.
By using soc_device_match() it is easier to add support for new devices.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200803125713.17829-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The of_device_id is included unconditionally by of.h header and used
in the driver as well. Remove of_match_ptr to fix W=1 compile test
warning with !CONFIG_OF:
drivers/dma/ti/omap-dma.c:1892:34: warning: 'omap_dma_match' defined but not used [-Wunused-const-variable=]
1892 | static const struct of_device_id omap_dma_match[] = {
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200728170939.28278-1-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drivers using legacy PM have to manage PCI states and device's PM states
themselves. They also need to take care of configuration registers.
With improved and powerful support of generic PM, PCI Core takes care of
above mentioned, device-independent, jobs.
This driver makes use of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(),
and pci_set_power_state() to do required operations. In generic mode, they
are no longer needed.
Change function parameter in both .suspend() and .resume() to
"struct device*" type. Use dev_get_drvdata() to get drv data.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200720113740.353479-1-vaibhavgupta40@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T+fx
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few differerent things in here.
Seems like syzbot got some more io_uring bits wired up, and we got a
handful of reports and the associated fixes are in here.
General fixes too, and a lot of them marked for stable.
Lastly, a bit of fallout from the async buffered reads, where we now
more easily trigger short reads. Some applications don't really like
that, so the io_read() code now handles short reads internally, and
got a cleanup along the way so that it's now easier to read (and
documented). We're now passing tests that failed before"
* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
io_uring: short circuit -EAGAIN for blocking read attempt
io_uring: sanitize double poll handling
io_uring: internally retry short reads
io_uring: retain iov_iter state over io_read/io_write calls
task_work: only grab task signal lock when needed
io_uring: enable lookup of links holding inflight files
io_uring: fail poll arm on queue proc failure
io_uring: hold 'ctx' reference around task_work queue + execute
fs: RWF_NOWAIT should imply IOCB_NOIO
io_uring: defer file table grabbing request cleanup for locked requests
io_uring: add missing REQ_F_COMP_LOCKED for nested requests
io_uring: fix recursive completion locking on oveflow flush
io_uring: use TWA_SIGNAL for task_work uncondtionally
io_uring: account locked memory before potential error case
io_uring: set ctx sq/cq entry count earlier
io_uring: Fix NULL pointer dereference in loop_rw_iter()
io_uring: add comments on how the async buffered read retry works
io_uring: io_async_buf_func() need not test page bit
Commit 1355c31eeb ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.
Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.
Fixes: 1355c31eeb ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=10Pr
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes on the block side of things:
- Discard granularity fix (Coly)
- rnbd cleanups (Guoqing)
- md error handling fix (Dan)
- md sysfs fix (Junxiao)
- Fix flush request accounting, which caused an IO slowdown for some
configurations (Ming)
- Properly propagate loop flag for partition scanning (Lennart)"
* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
block: fix double account of flush request's driver tag
loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
rnbd: no need to set bi_end_io in rnbd_bio_map_kern
rnbd: remove rnbd_dev_submit_io
md-cluster: Fix potential error pointer dereference in resize_bitmaps()
block: check queue's limits.discard_granularity in __blkdev_issue_discard()
md: get sysfs entry after redundancy attr group create
I collected a single fix during the merge window: we managed to break the early
trap setup on !MMU, this patch fixes it.
The power keeps going on here so I haven't have a chance to give this the
testing I usually would, but I don't have a Kendryte anyway so I doubt I'd pick
up anything subtle even if I was to test. The patch seems pretty safe and it's
still early, so I don't see any reason to let it sit around.
It's fairly late so if it misses the merge window that's not a big deal. I'll
definately have stuff for next week, so I'll just start from whenever this
lands.
-----BEGIN PGP SIGNATURE-----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=+8KT
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"I collected a single fix during the merge window: we managed to break
the early trap setup on !MMU, this fixes it"
* tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Setup exception vector for nommu platform
changes to arch/sh.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJfODUiAAoJELcQ+SIFb8Hau0wH/iPeZyv0EhIwL41OPrWhm5wb
26MNWPvPjYIpKVpr0HMXiffILv595ntvrH0Ujnh1+e8J2kRj0eT+T91UkoyGSfav
oWmjgcG3NRK6p9882Oo8Xavjr1cTTclOmmDInR4lpAcfIBXkeq2eX0R1h2IuGdNM
idGlXhJMkgV+xTlgZy7pYmw5pvFMqL5j7fAUQxm0UoY9kbu8Ac4bOR5WrqtFpkjt
xTh9141YvSSfpRx9uMzrQLuUYGzGePhnjUGSUf/b1deYG/33lNtzhHr+QMK6BpXr
zdhFalJP40+m+2tG0nCBpAIZcWiOLGb23in5n/trFx3BGZfUf5EKnhZEGUYeE7Q=
=XWDn
-----END PGP SIGNATURE-----
Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh"
* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
sh: landisk: Add missing initialization of sh_io_port_base
sh: bring syscall_set_return_value in line with other architectures
sh: Add SECCOMP_FILTER
sh: Rearrange blocks in entry-common.S
sh: switch to copy_thread_tls()
sh: use the generic dma coherent remap allocator
sh: don't allow non-coherent DMA for NOMMU
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
sh: unexport register_trapped_io and match_trapped_io_handler
sh: don't include <asm/io_trapped.h> in <asm/io.h>
sh: move the ioremap implementation out of line
sh: move ioremap_fixed details out of <asm/io.h>
sh: remove __KERNEL__ ifdefs from non-UAPI headers
sh: sort the selects for SUPERH alphabetically
sh: remove -Werror from Makefiles
sh: Replace HTTP links with HTTPS ones
arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
sh: stacktrace: Remove stacktrace_ops.stack()
sh: machvec: Modernize printing of kernel messages
sh: pci: Modernize printing of kernel messages
...
One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.
Fixes: 227c0c9673 ("io_uring: internally retry short reads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
