[ Upstream commit 2e96d2d8c2 ]
Fix an error in nvme_log_err_passthru() where cdw14 was incorrectly
printed twice instead of cdw15. This fix ensures accurate logging of
the full passthrough command payload.
Fixes: 9f079dda14 ("nvme: allow passthru cmd error logging")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit caa7c7a76b ]
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest().
The __mock_request_alloc() function implements the
smoketest->request_alloc() function pointer. It was supposed to return
error pointers, but it propogates the NULL return from mock_request()
so in the event of a failure, it would lead to a NULL pointer
dereference.
To fix this, change the mock_request() function to return error pointers
and update all the callers to expect that.
Fixes: 52c0fdb25c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 778fa8ad5f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa60c094c1 ]
In target mode, extra interrupts can be received between the end of a
transfer and halting the module if the host continues sending more data.
If the interrupt from this occurs after the reinit_completion() then the
completion counter is left at a non-zero value. The next unrelated
transfer initiated by userspace will then complete immediately without
waiting for the interrupt or writing to the RX buffer.
Fix it by resetting the counter before the transfer so that lingering
values are cleared. This is done after clearing the FIFOs and the
status register but before the transfer is initiated, so no interrupts
should be received at this point resulting in other race conditions.
Fixes: 4f5ee75ea1 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250627-james-nxp-spi-dma-v4-1-178dba20c120@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d91394f23 ]
Commit c9b1150a68 ("drm/atomic-helper: Re-order bridge chain pre-enable
and post-disable") changed the call sequence to the CRTC enable/disable
and bridge pre_enable/post_disable methods, so those bridge methods are
now called when CRTC is not yet enabled.
This causes a lockup observed on Samsung Peach-Pit/Pi Chromebooks. The
source of this lockup is a call to fimd_dp_clock_enable() function, when
FIMD device is not yet runtime resumed. It worked before the mentioned
commit only because the CRTC implemented by the FIMD driver was always
enabled what guaranteed the FIMD device to be runtime resumed.
This patch adds runtime PM guards to the fimd_dp_clock_enable() function
to enable its proper operation also when the CRTC implemented by FIMD is
not yet enabled.
Fixes: 196e059a8a ("drm/exynos: convert clock_enable crtc callback to pipeline clock")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2def09ead4 ]
The driver registered xdp_rxq_info structures via xdp_rxq_info_reg()
but failed to properly unregister them in error paths and during
removal.
Fixes: d678be1dc1 ("dpaa2-eth: add XDP_REDIRECT support")
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20250626133003.80136-1-wangfushuai@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d72411d209 ]
The `dma_map_XXX()` functions can fail and must be checked using
`dma_mapping_error()`. This patch adds proper error handling for all
DMA mapping calls.
In `atl1_alloc_rx_buffers()`, if DMA mapping fails, the buffer is
deallocated and marked accordingly.
In `atl1_tx_map()`, previously mapped buffers are unmapped and the
packet is dropped on failure.
If `atl1_xmit_frame()` drops the packet, increment the tx_error counter.
Fixes: f3cc28c797 ("Add Attansic L1 ethernet driver.")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20250625141629.114984-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 157501b046 ]
We are setting the parent directory's last_unlink_trans directly which
may result in a concurrent task starting to log the directory not see the
update and therefore can log the directory after we removed a child
directory which had a snapshot within instead of falling back to a
transaction commit. Replaying such a log tree would result in a mount
failure since we can't currently delete snapshots (and subvolumes) during
log replay. This is the type of failure described in commit 1ec9a1ae1e
("Btrfs: fix unreplayable log after snapshot delete + parent dir fsync").
Fix this by using btrfs_record_snapshot_destroy() which updates the
last_unlink_trans field while holding the inode's log_mutex lock.
Fixes: 44f714dae5 ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c466e33e72 ]
In case the removed directory had a snapshot that was deleted, we are
propagating its inode's last_unlink_trans to the parent directory after
we removed the entry from the parent directory. This leaves a small race
window where someone can log the parent directory after we removed the
entry and before we updated last_unlink_trans, and as a result if we ever
try to replay such a log tree, we will fail since we will attempt to
remove a snapshot during log replay, which is currently not possible and
results in the log replay (and mount) to fail. This is the type of failure
described in commit 1ec9a1ae1e ("Btrfs: fix unreplayable log after
snapshot delete + parent dir fsync").
So fix this by propagating the last_unlink_trans to the parent directory
before we remove the entry from it.
Fixes: 44f714dae5 ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf5bcf9a6f ]
Instead of recording that a new subvolume was created in a directory after
we add the entry do the directory, record it before adding the entry. This
is to avoid races where after creating the entry and before recording the
new subvolume in the directory (the call to btrfs_record_new_subvolume()),
another task logs the directory, so we end up with a log tree where we
logged a directory that has an entry pointing to a root that was not yet
committed, resulting in an invalid entry if the log is persisted and
replayed later due to a power failure or crash.
Also state this requirement in the function comment for
btrfs_record_new_subvolume(), similar to what we do for the
btrfs_record_unlink_dir() and btrfs_record_snapshot_destroy().
Fixes: 45c4102f0d ("btrfs: avoid transaction commit on any fsync after subvolume creation")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f61b96159 ]
When replaying log trees we use read_one_inode() to get an inode, which is
just a wrapper around btrfs_iget_logging(), which in turn is a wrapper for
btrfs_iget(). But read_one_inode() always returns NULL for any error
that btrfs_iget_logging() / btrfs_iget() may return and this is a problem
because:
1) In many callers of read_one_inode() we convert the NULL into -EIO,
which is not accurate since btrfs_iget() may return -ENOMEM and -ENOENT
for example, besides -EIO and other errors. So during log replay we
may end up reporting a false -EIO, which is confusing since we may
not have had any IO error at all;
2) When replaying directory deletes, at replay_dir_deletes(), we assume
the NULL returned from read_one_inode() means that the inode doesn't
exist and then proceed as if no error had happened. This is wrong
because unless btrfs_iget() returned ERR_PTR(-ENOENT), we had an
actual error and the target inode may exist in the target subvolume
root - this may later result in the log replay code failing at a
later stage (if we are "lucky") or succeed but leaving some
inconsistency in the filesystem.
So fix this by not ignoring errors from btrfs_iget_logging() and as
a consequence remove the read_one_inode() wrapper and just use
btrfs_iget_logging() directly. Also since btrfs_iget_logging() is
supposed to be called only against subvolume roots, just like
read_one_inode() which had a comment about it, add an assertion to
btrfs_iget_logging() to check that the target root corresponds to a
subvolume root.
Fixes: 5d4f98a28c ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dcf838cf5 ]
In a few places where we call read_one_inode(), if we get a NULL pointer
we end up jumping into an error path, or fallthrough in case of
__add_inode_ref(), where we then do something like this:
iput(&inode->vfs_inode);
which results in an invalid inode pointer that triggers an invalid memory
access, resulting in a crash.
Fix this by making sure we don't do such dereferences.
Fixes: b4c50cbb01 ("btrfs: return a btrfs_inode from read_one_inode()")
CC: stable@vger.kernel.org # 6.15+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 5f61b96159 ("btrfs: fix inode lookup error handling during log replay")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4c50cbb01 ]
All callers of read_one_inode() are mostly interested in the btrfs_inode
structure rather than the VFS inode, so make read_one_inode() return
the btrfs_inode instead, avoiding lots of BTRFS_I() calls.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 5f61b96159 ("btrfs: fix inode lookup error handling during log replay")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a488d8ac2c ]
All callers of btrfs_iget_logging() are interested in the btrfs_inode
structure rather than the VFS inode, so make btrfs_iget_logging() return
the btrfs_inode instead, avoiding lots of BTRFS_I() calls.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 5f61b96159 ("btrfs: fix inode lookup error handling during log replay")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54a7081ed1 ]
At __inode_add_ref() when processing extrefs, if we jump into the next
label we have an undefined value of victim_name.len, since we haven't
initialized it before we did the goto. This results in an invalid memory
access in the next iteration of the loop since victim_name.len was not
initialized to the length of the name of the current extref.
Fix this by initializing victim_name.len with the current extref's name
length.
Fixes: e43eec81c5 ("btrfs: use struct qstr instead of name and namelen pairs")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6561a40cec ]
During log replay, at __add_inode_ref(), when we are searching for inode
ref keys we totally ignore if btrfs_search_slot() returns an error. This
may make a log replay succeed when there was an actual error and leave
some metadata inconsistency in a subvolume tree. Fix this by checking if
an error was returned from btrfs_search_slot() and if so, return it to
the caller.
Fixes: e02119d5a7 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d07143b507 ]
change error log to use correct bus number from main_mux_devs
instead of cpld_devs.
Fixes: 662f24826f ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250622072921.4111552-2-alok.a.tiwari@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 173bbec669 ]
same ID (103) was assigned to both GDC_BANK0_G_RSE_PIPE_CACHE_DATA0
and GDC_BANK0_G_RSE_PIPE_CACHE_DATA1. This could lead to incorrect
event mapping.
Updated the ID to 104 to ensure uniqueness.
Fixes: 423c336185 ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250619060502.3594350-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9a9e68954 ]
Always enable vport loopback for both MPV devices on driver start.
Previously in some cases related to MPV RoCE, packets weren't correctly
executing loopback check at vport in FW, since it was disabled.
Due to complexity of identifying such cases for MPV always enable vport
loopback for both GVMIs when binding the slave to the master port.
Fixes: 0042f9e458 ("RDMA/mlx5: Enable vport loopback when user context or QP mandate")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/d4298f5ebb2197459e9e7221c51ecd6a34699847.1750064969.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acd245b1e3 ]
In case, CC counters are querying for the second port use the correct
core device for the query instead of always using the master core device.
Fixes: aac4492ef2 ("IB/mlx5: Update counter implementation for dual port RoCE")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/9cace74dcf106116118bebfa9146d40d4166c6b0.1750064969.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cc1dbfddf ]
To get the device HW counters, a non-representor switchdev device
should use the mlx5_ib_query_q_counters() function and query all of
the available counters. While a representor device in switchdev mode
should use the mlx5_ib_query_q_counters_vport() function and query only
the Q_Counters without the PPCNT counters and congestion control counters,
since they aren't relevant for a representor device.
Currently a non-representor switchdev device skips querying the PPCNT
counters and congestion control counters, leaving them unupdated.
Fix that by properly querying those counters for non-representor devices.
Fixes: d22467a71e ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/56bf8af4ca8c58e3fb9f7e47b1dca2009eeeed81.1750064969.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 021f243627 ]
Change "resourse" into "resource" in the name of a sysfs attribute.
Fixes: d829fc8a10 ("scsi: ufs: sysfs: unit descriptor")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8889676cd6 ]
sd_read_block_limits_ext() currently assumes that vpd->len excludes the
size of the page header. However, vpd->len describes the size of the entire
VPD page, therefore the sanity check is incorrect.
In practice this is not really a problem since we don't attach VPD
pages unless they actually report data trailing the header. But fix
the length check regardless.
This issue was identified by Wukong-Agent (formerly Tencent Woodpecker), a
code security AI agent, through static code analysis.
[mkp: rewrote patch description]
Signed-off-by: jackysliu <1972843537@qq.com>
Link: https://lore.kernel.org/r/tencent_ADA5210D1317EEB6CD7F3DE9FE9DA4591D05@qq.com
Fixes: 96b171d6db ("scsi: core: Query the Block Limits Extension VPD page")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00f452a1b0 ]
dma_map_XXX() can fail and should be tested for errors with
dma_mapping_error().
Fixes: b3a271a94d ("[SCSI] qla4xxx: support iscsiadm session mgmt")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250618071742.21822-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3b214719a ]
dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is
often ~0. The error value should be tested with dma_mapping_error() like
it was done in qla26xx_dport_diagnostics().
Fixes: 818c7f87a1 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250617161115.39888-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c017762874 ]
We found a few different systems hung up in writeback waiting on the same
page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in
pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count
was zero.
It seems most likely that this is another race between the waiter and waker
similar to commit ed0172af5d ("SUNRPC: Fix a race to wake a sync task").
Fix it up by applying the advised barrier.
Fixes: 880265c77a ("pNFS: Avoid a live lock condition in pnfs_update_layout()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 109f4d29da ]
Fix warnings reported by sparse, related to incorrect type:
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types)
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404040339.S7CUIgf3-lkp@intel.com/
Fixes: 78034cbece ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250613214608.2250130-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 27e850c88d upstream.
The notifier callback node allocation is currently done while holding
the notify_lock mutex. While this is safe even if memory allocation may
sleep, we need to move the allocation outside the locked region in
preparation to move from using muxtes to rwlocks.
Move the memory allocation to avoid potential sleeping in atomic context
once the locks are moved from mutex to rwlocks.
Fixes: e0573444ed ("firmware: arm_ffa: Add interfaces to request notification callbacks")
Message-Id: <20250528-ffa_notif_fix-v1-2-5ed7bc7f8437@arm.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a833d31ad8 ]
Commit e0573444ed ("firmware: arm_ffa: Add interfaces to request
notification callbacks") adds support for notifier callbacks by allocating
and inserting a callback node into a hashtable during registration of
notifiers. However, during unregistration, the code only removes the
node from the hashtable without freeing the associated memory, resulting
in a memory leak.
Resolve the memory leak issue by ensuring the allocated notifier callback
node is properly freed after it is removed from the hashtable entry.
Fixes: e0573444ed ("firmware: arm_ffa: Add interfaces to request notification callbacks")
Message-Id: <20250528-ffa_notif_fix-v1-1-5ed7bc7f8437@arm.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f5de469990 upstream.
If msdc_prepare_data() fails to map the DMA region, the request is
not prepared for data receiving, but msdc_start_data() proceeds
the DMA with previous setting.
Since this will lead a memory corruption, we have to stop the
request operation soon after the msdc_prepare_data() fails to
prepare it.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 208489032b ("mmc: mediatek: Add Mediatek MMC driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/174972756982.3337526.6755001617701603082.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 539d80575b upstream.
When swiotlb buffer is full, the dma_map_sg() returns 0 to
msdc_prepare_data(), but it does not check it and sets the
MSDC_PREPARE_FLAG.
swiotlb_tbl_map_single() /* prints "swiotlb buffer is full" */
<-swiotlb_map()
<-dma_direct_map_page()
<-dma_direct_map_sg()
<-__dma_map_sg_attrs()
<-dma_map_sg_attrs()
<-dma_map_sg() /* returns 0 (pages mapped) */
<-msdc_prepare_data()
Then, the msdc_unprepare_data() checks MSDC_PREPARE_FLAG and calls
dma_unmap_sg() with unmapped pages. It causes a page fault.
To fix this problem, Do not set MSDC_PREPARE_FLAG if dma_map_sg()
fails because this is not prepared.
Fixes: 208489032b ("mmc: mediatek: Add Mediatek MMC driver")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/174908565814.4056588.769599127120955383.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af4db5a35a upstream.
A poorly implemented DisplayPort Alt Mode port partner can indicate
that its pin assignment capabilities are greater than the maximum
value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show
will cause a BRK exception due to an out of bounds array access.
Prevent for loop in pin_assignment_show from accessing
invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX
value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop
condition.
Fixes: 0e3bb7d689 ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250618224943.3263103-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cf65845fd upstream.
The cs40l50_upload_owt() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails.
Signed-off-by: Yunshui Jiang <jiangyunshui@kylinos.cn>
Fixes: c38fe1bb5d ("Input: cs40l50 - Add support for the CS40L50 haptic driver")
Link: https://lore.kernel.org/r/20250704024010.2353841-1-jiangyunshui@kylinos.cn
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9764fd88b upstream.
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable.
Cc: stable@vger.kernel.org # 5.0
Fixes: d6cd33ad71 ("regulator: gpio: Convert to use descriptors")
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250703103549.16558-1-mani@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8186255705 upstream.
The hugepage test cases of iommufd_dirty_tracking have the 64MB and 128MB
coverages. Both of them are smaller than the default hugepage size 512MB,
when CONFIG_PAGE_SIZE_64KB=y. However, these test cases have a variant of
using huge pages, which would mmap(MAP_HUGETLB) using these smaller sizes
than the system hugepag size. This results in the kernel aligning up the
smaller size to 512MB. If a memory was located between the upper 64/128MB
size boundary and the hugepage 512MB boundary, it would get wiped out:
https://lore.kernel.org/all/aEoUhPYIAizTLADq@nvidia.com/
Given that this aligning up behavior is well documented, we have no choice
but to allocate a hugepage aligned size to avoid this unintended wipe out.
Instead of relying on the kernel's internal force alignment, pass the same
size to posix_memalign() and map().
Also, fix the FIXTURE_TEARDOWN() misusing munmap() to free the memory from
posix_memalign(), as munmap() doesn't destroy the allocator meta data. So,
call free() instead.
Fixes: a9af47e382 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Link: https://patch.msgid.link/r/1ea8609ae6d523fdd4d8efb179ddee79c8582cb6.1750787928.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3cb5676e5 upstream.
The unconditional call of hci_disable_advertising_sync() in
mesh_send_done_sync() also disables other LE advertisings (non mesh
related).
I am not sure whether this call is required at all, but checking the
adv_instances list (like done at other places) seems to solve the
problem.
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5af67a870 upstream.
According to the message of commit b338d91703 ("Bluetooth: Implement
support for Mesh"), MGMT_OP_SET_MESH_RECEIVER should set the passive scan
parameters. Currently the scan interval and window parameters are
silently ignored, although user space (bluetooth-meshd) expects that
they can be used [1]
[1] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/mesh/mesh-io-mgmt.c#n344
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46c0d947b6 upstream.
This reverts minor parts of the changes made in commit b338d91703
("Bluetooth: Implement support for Mesh"). It looks like these changes
were only made for development purposes but shouldn't have been part of
the commit.
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89fb8acc38 upstream.
Currently, for controllers with extended advertising, the advertising
data is set in the asynchronous response handler for extended
adverstising params. As most advertising settings are performed in a
synchronous context, the (asynchronous) setting of the advertising data
is done too late (after enabling the advertising).
Move setting of adverstising data from asynchronous response handler
into synchronous context to fix ordering of HCI commands.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Fixes: a0fb3726ba ("Bluetooth: Use Set ext adv/scan rsp data if controller supports")
Cc: stable@vger.kernel.org
v2: https://lore.kernel.org/linux-bluetooth/20250626115209.17839-1-ceggers@arri.de/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 009c3a4bc4 upstream.
Move the BROKEN_SD_DISCARD quirk for certain SanDisk SD cards from the
`mmc_blk_fixups[]` to `mmc_sd_fixups[]`. This ensures the quirk is
applied earlier in the device initialization process, aligning with the
reasoning in [1]. Applying the quirk sooner prevents the kernel from
incorrectly enabling discard support on affected cards during initial
setup.
[1] https://lore.kernel.org/all/20240820230631.GA436523@sony.com
Fixes: 07d2872bf4 ("mmc: core: Add SD card quirk for broken discard")
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250526114445.675548-1-avri.altman@sandisk.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcc3bcfc5b upstream.
It has turned out the trying to strictly conform to the SDHCI specification
is causing problems. Let's revert and start over.
This reverts commit fb3bbc46c9.
Cc: Erick Shepherd <erick.shepherd@ni.com>
Cc: stable@vger.kernel.org
Fixes: fb3bbc46c9 ("mmc: sdhci: Disable SD card clock before changing parameters")
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Jonathan Liu <net147@gmail.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Closes: https://bugs.debian.org/1108065
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250624110932.176925-1-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5186ff7e1d upstream.
When setting "ethtool -L eth0 combined 1", the number of RX/TX queue is
changed to be 1. RSS is disabled at this moment, and the indices of FDIR
have not be changed in wx_set_rss_queues(). So the combined count still
shows the previous value. This issue was introduced when supporting
FDIR. Fix it for those devices that support FDIR.
Fixes: 34744a7749 ("net: txgbe: add FDIR info to ethtool ops")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/A5C8FE56D6C04608+20250701070625.73680-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
