Commit graph

1,323,722 commits

Author SHA1 Message Date
Paulo Alcantara
f15288c137 smb: client: fix memory leak in cifs_construct_tcon()
commit 3184b6a5a2 upstream.

When having a multiuser mount with domain= specified and using
cifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname,
so it needs to be freed before leaving cifs_construct_tcon().

This fixes the following memory leak reported by kmemleak:

  mount.cifs //srv/share /mnt -o domain=ZELDA,multiuser,...
  su - testuser
  cifscreds add -d ZELDA -u testuser
  ...
  ls /mnt/1
  ...
  umount /mnt
  echo scan > /sys/kernel/debug/kmemleak
  cat /sys/kernel/debug/kmemleak
  unreferenced object 0xffff8881203c3f08 (size 8):
    comm "ls", pid 5060, jiffies 4307222943
    hex dump (first 8 bytes):
      5a 45 4c 44 41 00 cc cc                          ZELDA...
    backtrace (crc d109a8cf):
      __kmalloc_node_track_caller_noprof+0x572/0x710
      kstrdup+0x3a/0x70
      cifs_sb_tlink+0x1209/0x1770 [cifs]
      cifs_get_fattr+0xe1/0xf50 [cifs]
      cifs_get_inode_info+0xb5/0x240 [cifs]
      cifs_revalidate_dentry_attr+0x2d1/0x470 [cifs]
      cifs_getattr+0x28e/0x450 [cifs]
      vfs_getattr_nosec+0x126/0x180
      vfs_statx+0xf6/0x220
      do_statx+0xab/0x110
      __x64_sys_statx+0xd5/0x130
      do_syscall_64+0xbb/0x380
      entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: f2aee329a6 ("cifs: set domainName when a domain-key is used in multiuser")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Jay Shin <jaeshin@redhat.com>
Cc: stable@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:59 +09:00
Jamie Iles
237f00629b drivers/usb/dwc3: fix PCI parent check
commit 40f8d17eed upstream.

The sysdev_is_parent check was being used to infer PCI devices that have
the DMA mask set from the PCI capabilities, but sysdev_is_parent is also
used for non-PCI ACPI devices in which case the DMA mask would be the
bus default or as set by the _DMA method.

Without this fix the DMA mask would default to 32-bits and so allocation
would fail if there was no DRAM below 4GB.

Fixes: 47ce45906c ("usb: dwc3: leave default DMA for PCI devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Jamie Iles <jamie.iles@oss.qualcomm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251107104437.1602509-1-punit.agrawal@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:59 +09:00
Mikulas Patocka
b3f5d4f6af dm-verity: fix unreliable memory allocation
commit fe680d8c74 upstream.

GFP_NOWAIT allocation may fail anytime. It needs to be changed to
GFP_NOIO. There's no need to handle an error because mempool_alloc with
GFP_NOIO can't fail.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:59 +09:00
Viacheslav Dubeyko
47144748fb ceph: fix crash in process_v2_sparse_read() for encrypted directories
commit 43962db4a6 upstream.

The crash in process_v2_sparse_read() for fscrypt-encrypted directories
has been reported. Issue takes place for Ceph msgr2 protocol in secure
mode. It can be reproduced by the steps:

sudo mount -t ceph :/ /mnt/cephfs/ -o name=admin,fs=cephfs,ms_mode=secure

(1) mkdir /mnt/cephfs/fscrypt-test-3
(2) cp area_decrypted.tar /mnt/cephfs/fscrypt-test-3
(3) fscrypt encrypt --source=raw_key --key=./my.key /mnt/cephfs/fscrypt-test-3
(4) fscrypt lock /mnt/cephfs/fscrypt-test-3
(5) fscrypt unlock --key=my.key /mnt/cephfs/fscrypt-test-3
(6) cat /mnt/cephfs/fscrypt-test-3/area_decrypted.tar
(7) Issue has been triggered

[  408.072247] ------------[ cut here ]------------
[  408.072251] WARNING: CPU: 1 PID: 392 at net/ceph/messenger_v2.c:865
ceph_con_v2_try_read+0x4b39/0x72f0
[  408.072267] Modules linked in: intel_rapl_msr intel_rapl_common
intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery
pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass
polyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouse
serio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfg
pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore
[  408.072304] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Not tainted 6.17.0-rc7+
[  408.072307] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.17.0-5.fc42 04/01/2014
[  408.072310] Workqueue: ceph-msgr ceph_con_workfn
[  408.072314] RIP: 0010:ceph_con_v2_try_read+0x4b39/0x72f0
[  408.072317] Code: c7 c1 20 f0 d4 ae 50 31 d2 48 c7 c6 60 27 d5 ae 48 c7 c7 f8
8e 6f b0 68 60 38 d5 ae e8 00 47 61 fe 48 83 c4 18 e9 ac fc ff ff <0f> 0b e9 06
fe ff ff 4c 8b 9d 98 fd ff ff 0f 84 64 e7 ff ff 89 85
[  408.072319] RSP: 0018:ffff88811c3e7a30 EFLAGS: 00010246
[  408.072322] RAX: ffffed1024874c6f RBX: ffffea00042c2b40 RCX: 0000000000000f38
[  408.072324] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[  408.072325] RBP: ffff88811c3e7ca8 R08: 0000000000000000 R09: 00000000000000c8
[  408.072326] R10: 00000000000000c8 R11: 0000000000000000 R12: 00000000000000c8
[  408.072327] R13: dffffc0000000000 R14: ffff8881243a6030 R15: 0000000000003000
[  408.072329] FS:  0000000000000000(0000) GS:ffff88823eadf000(0000)
knlGS:0000000000000000
[  408.072331] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  408.072332] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0
[  408.072336] PKRU: 55555554
[  408.072337] Call Trace:
[  408.072338]  <TASK>
[  408.072340]  ? sched_clock_noinstr+0x9/0x10
[  408.072344]  ? __pfx_ceph_con_v2_try_read+0x10/0x10
[  408.072347]  ? _raw_spin_unlock+0xe/0x40
[  408.072349]  ? finish_task_switch.isra.0+0x15d/0x830
[  408.072353]  ? __kasan_check_write+0x14/0x30
[  408.072357]  ? mutex_lock+0x84/0xe0
[  408.072359]  ? __pfx_mutex_lock+0x10/0x10
[  408.072361]  ceph_con_workfn+0x27e/0x10e0
[  408.072364]  ? metric_delayed_work+0x311/0x2c50
[  408.072367]  process_one_work+0x611/0xe20
[  408.072371]  ? __kasan_check_write+0x14/0x30
[  408.072373]  worker_thread+0x7e3/0x1580
[  408.072375]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[  408.072378]  ? __pfx_worker_thread+0x10/0x10
[  408.072381]  kthread+0x381/0x7a0
[  408.072383]  ? __pfx__raw_spin_lock_irq+0x10/0x10
[  408.072385]  ? __pfx_kthread+0x10/0x10
[  408.072387]  ? __kasan_check_write+0x14/0x30
[  408.072389]  ? recalc_sigpending+0x160/0x220
[  408.072392]  ? _raw_spin_unlock_irq+0xe/0x50
[  408.072394]  ? calculate_sigpending+0x78/0xb0
[  408.072395]  ? __pfx_kthread+0x10/0x10
[  408.072397]  ret_from_fork+0x2b6/0x380
[  408.072400]  ? __pfx_kthread+0x10/0x10
[  408.072402]  ret_from_fork_asm+0x1a/0x30
[  408.072406]  </TASK>
[  408.072407] ---[ end trace 0000000000000000 ]---
[  408.072418] Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
[  408.072984] KASAN: null-ptr-deref in range [0x0000000000000000-
0x0000000000000007]
[  408.073350] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Tainted: G        W
6.17.0-rc7+ #1 PREEMPT(voluntary)
[  408.073886] Tainted: [W]=WARN
[  408.074042] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.17.0-5.fc42 04/01/2014
[  408.074468] Workqueue: ceph-msgr ceph_con_workfn
[  408.074694] RIP: 0010:ceph_msg_data_advance+0x79/0x1a80
[  408.074976] Code: fc ff df 49 8d 77 08 48 c1 ee 03 80 3c 16 00 0f 85 07 11 00
00 48 ba 00 00 00 00 00 fc ff df 49 8b 5f 08 48 89 de 48 c1 ee 03 <0f> b6 14 16
84 d2 74 09 80 fa 03 0f 8e 0f 0e 00 00 8b 13 83 fa 03
[  408.075884] RSP: 0018:ffff88811c3e7990 EFLAGS: 00010246
[  408.076305] RAX: ffff8881243a6388 RBX: 0000000000000000 RCX: 0000000000000000
[  408.076909] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff8881243a6378
[  408.077466] RBP: ffff88811c3e7a20 R08: 0000000000000000 R09: 00000000000000c8
[  408.078034] R10: ffff8881243a6388 R11: 0000000000000000 R12: ffffed1024874c71
[  408.078575] R13: dffffc0000000000 R14: ffff8881243a6030 R15: ffff8881243a6378
[  408.079159] FS:  0000000000000000(0000) GS:ffff88823eadf000(0000)
knlGS:0000000000000000
[  408.079736] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  408.080039] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0
[  408.080376] PKRU: 55555554
[  408.080513] Call Trace:
[  408.080630]  <TASK>
[  408.080729]  ceph_con_v2_try_read+0x49b9/0x72f0
[  408.081115]  ? __pfx_ceph_con_v2_try_read+0x10/0x10
[  408.081348]  ? _raw_spin_unlock+0xe/0x40
[  408.081538]  ? finish_task_switch.isra.0+0x15d/0x830
[  408.081768]  ? __kasan_check_write+0x14/0x30
[  408.081986]  ? mutex_lock+0x84/0xe0
[  408.082160]  ? __pfx_mutex_lock+0x10/0x10
[  408.082343]  ceph_con_workfn+0x27e/0x10e0
[  408.082529]  ? metric_delayed_work+0x311/0x2c50
[  408.082737]  process_one_work+0x611/0xe20
[  408.082948]  ? __kasan_check_write+0x14/0x30
[  408.083156]  worker_thread+0x7e3/0x1580
[  408.083331]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[  408.083557]  ? __pfx_worker_thread+0x10/0x10
[  408.083751]  kthread+0x381/0x7a0
[  408.083922]  ? __pfx__raw_spin_lock_irq+0x10/0x10
[  408.084139]  ? __pfx_kthread+0x10/0x10
[  408.084310]  ? __kasan_check_write+0x14/0x30
[  408.084510]  ? recalc_sigpending+0x160/0x220
[  408.084708]  ? _raw_spin_unlock_irq+0xe/0x50
[  408.084917]  ? calculate_sigpending+0x78/0xb0
[  408.085138]  ? __pfx_kthread+0x10/0x10
[  408.085335]  ret_from_fork+0x2b6/0x380
[  408.085525]  ? __pfx_kthread+0x10/0x10
[  408.085720]  ret_from_fork_asm+0x1a/0x30
[  408.085922]  </TASK>
[  408.086036] Modules linked in: intel_rapl_msr intel_rapl_common
intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery
pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass
polyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouse
serio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfg
pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore
[  408.087778] ---[ end trace 0000000000000000 ]---
[  408.088007] RIP: 0010:ceph_msg_data_advance+0x79/0x1a80
[  408.088260] Code: fc ff df 49 8d 77 08 48 c1 ee 03 80 3c 16 00 0f 85 07 11 00
00 48 ba 00 00 00 00 00 fc ff df 49 8b 5f 08 48 89 de 48 c1 ee 03 <0f> b6 14 16
84 d2 74 09 80 fa 03 0f 8e 0f 0e 00 00 8b 13 83 fa 03
[  408.089118] RSP: 0018:ffff88811c3e7990 EFLAGS: 00010246
[  408.089357] RAX: ffff8881243a6388 RBX: 0000000000000000 RCX: 0000000000000000
[  408.089678] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff8881243a6378
[  408.090020] RBP: ffff88811c3e7a20 R08: 0000000000000000 R09: 00000000000000c8
[  408.090360] R10: ffff8881243a6388 R11: 0000000000000000 R12: ffffed1024874c71
[  408.090687] R13: dffffc0000000000 R14: ffff8881243a6030 R15: ffff8881243a6378
[  408.091035] FS:  0000000000000000(0000) GS:ffff88823eadf000(0000)
knlGS:0000000000000000
[  408.091452] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  408.092015] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0
[  408.092530] PKRU: 55555554
[  417.112915]
==================================================================
[  417.113491] BUG: KASAN: slab-use-after-free in
__mutex_lock.constprop.0+0x1522/0x1610
[  417.114014] Read of size 4 at addr ffff888124870034 by task kworker/2:0/4951

[  417.114587] CPU: 2 UID: 0 PID: 4951 Comm: kworker/2:0 Tainted: G      D W
6.17.0-rc7+ #1 PREEMPT(voluntary)
[  417.114592] Tainted: [D]=DIE, [W]=WARN
[  417.114593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.17.0-5.fc42 04/01/2014
[  417.114596] Workqueue: events handle_timeout
[  417.114601] Call Trace:
[  417.114602]  <TASK>
[  417.114604]  dump_stack_lvl+0x5c/0x90
[  417.114610]  print_report+0x171/0x4dc
[  417.114613]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[  417.114617]  ? kasan_complete_mode_report_info+0x80/0x220
[  417.114621]  kasan_report+0xbd/0x100
[  417.114625]  ? __mutex_lock.constprop.0+0x1522/0x1610
[  417.114628]  ? __mutex_lock.constprop.0+0x1522/0x1610
[  417.114630]  __asan_report_load4_noabort+0x14/0x30
[  417.114633]  __mutex_lock.constprop.0+0x1522/0x1610
[  417.114635]  ? queue_con_delay+0x8d/0x200
[  417.114638]  ? __pfx___mutex_lock.constprop.0+0x10/0x10
[  417.114641]  ? __send_subscribe+0x529/0xb20
[  417.114644]  __mutex_lock_slowpath+0x13/0x20
[  417.114646]  mutex_lock+0xd4/0xe0
[  417.114649]  ? __pfx_mutex_lock+0x10/0x10
[  417.114652]  ? ceph_monc_renew_subs+0x2a/0x40
[  417.114654]  ceph_con_keepalive+0x22/0x110
[  417.114656]  handle_timeout+0x6b3/0x11d0
[  417.114659]  ? _raw_spin_unlock_irq+0xe/0x50
[  417.114662]  ? __pfx_handle_timeout+0x10/0x10
[  417.114664]  ? queue_delayed_work_on+0x8e/0xa0
[  417.114669]  process_one_work+0x611/0xe20
[  417.114672]  ? __kasan_check_write+0x14/0x30
[  417.114676]  worker_thread+0x7e3/0x1580
[  417.114678]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[  417.114682]  ? __pfx_sched_setscheduler_nocheck+0x10/0x10
[  417.114687]  ? __pfx_worker_thread+0x10/0x10
[  417.114689]  kthread+0x381/0x7a0
[  417.114692]  ? __pfx__raw_spin_lock_irq+0x10/0x10
[  417.114694]  ? __pfx_kthread+0x10/0x10
[  417.114697]  ? __kasan_check_write+0x14/0x30
[  417.114699]  ? recalc_sigpending+0x160/0x220
[  417.114703]  ? _raw_spin_unlock_irq+0xe/0x50
[  417.114705]  ? calculate_sigpending+0x78/0xb0
[  417.114707]  ? __pfx_kthread+0x10/0x10
[  417.114710]  ret_from_fork+0x2b6/0x380
[  417.114713]  ? __pfx_kthread+0x10/0x10
[  417.114715]  ret_from_fork_asm+0x1a/0x30
[  417.114720]  </TASK>

[  417.125171] Allocated by task 2:
[  417.125333]  kasan_save_stack+0x26/0x60
[  417.125522]  kasan_save_track+0x14/0x40
[  417.125742]  kasan_save_alloc_info+0x39/0x60
[  417.125945]  __kasan_slab_alloc+0x8b/0xb0
[  417.126133]  kmem_cache_alloc_node_noprof+0x13b/0x460
[  417.126381]  copy_process+0x320/0x6250
[  417.126595]  kernel_clone+0xb7/0x840
[  417.126792]  kernel_thread+0xd6/0x120
[  417.126995]  kthreadd+0x85c/0xbe0
[  417.127176]  ret_from_fork+0x2b6/0x380
[  417.127378]  ret_from_fork_asm+0x1a/0x30

[  417.127692] Freed by task 0:
[  417.127851]  kasan_save_stack+0x26/0x60
[  417.128057]  kasan_save_track+0x14/0x40
[  417.128267]  kasan_save_free_info+0x3b/0x60
[  417.128491]  __kasan_slab_free+0x6c/0xa0
[  417.128708]  kmem_cache_free+0x182/0x550
[  417.128906]  free_task+0xeb/0x140
[  417.129070]  __put_task_struct+0x1d2/0x4f0
[  417.129259]  __put_task_struct_rcu_cb+0x15/0x20
[  417.129480]  rcu_do_batch+0x3d3/0xe70
[  417.129681]  rcu_core+0x549/0xb30
[  417.129839]  rcu_core_si+0xe/0x20
[  417.130005]  handle_softirqs+0x160/0x570
[  417.130190]  __irq_exit_rcu+0x189/0x1e0
[  417.130369]  irq_exit_rcu+0xe/0x20
[  417.130531]  sysvec_apic_timer_interrupt+0x9f/0xd0
[  417.130768]  asm_sysvec_apic_timer_interrupt+0x1b/0x20

[  417.131082] Last potentially related work creation:
[  417.131305]  kasan_save_stack+0x26/0x60
[  417.131484]  kasan_record_aux_stack+0xae/0xd0
[  417.131695]  __call_rcu_common+0xcd/0x14b0
[  417.131909]  call_rcu+0x31/0x50
[  417.132071]  delayed_put_task_struct+0x128/0x190
[  417.132295]  rcu_do_batch+0x3d3/0xe70
[  417.132478]  rcu_core+0x549/0xb30
[  417.132658]  rcu_core_si+0xe/0x20
[  417.132808]  handle_softirqs+0x160/0x570
[  417.132993]  __irq_exit_rcu+0x189/0x1e0
[  417.133181]  irq_exit_rcu+0xe/0x20
[  417.133353]  sysvec_apic_timer_interrupt+0x9f/0xd0
[  417.133584]  asm_sysvec_apic_timer_interrupt+0x1b/0x20

[  417.133921] Second to last potentially related work creation:
[  417.134183]  kasan_save_stack+0x26/0x60
[  417.134362]  kasan_record_aux_stack+0xae/0xd0
[  417.134566]  __call_rcu_common+0xcd/0x14b0
[  417.134782]  call_rcu+0x31/0x50
[  417.134929]  put_task_struct_rcu_user+0x58/0xb0
[  417.135143]  finish_task_switch.isra.0+0x5d3/0x830
[  417.135366]  __schedule+0xd30/0x5100
[  417.135534]  schedule_idle+0x5a/0x90
[  417.135712]  do_idle+0x25f/0x410
[  417.135871]  cpu_startup_entry+0x53/0x70
[  417.136053]  start_secondary+0x216/0x2c0
[  417.136233]  common_startup_64+0x13e/0x141

[  417.136894] The buggy address belongs to the object at ffff888124870000
                which belongs to the cache task_struct of size 10504
[  417.138122] The buggy address is located 52 bytes inside of
                freed 10504-byte region [ffff888124870000, ffff888124872908)

[  417.139465] The buggy address belongs to the physical page:
[  417.140016] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
pfn:0x124870
[  417.140789] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0
pincount:0
[  417.141519] memcg:ffff88811aa20e01
[  417.141874] anon flags:
0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff)
[  417.142600] page_type: f5(slab)
[  417.142922] raw: 0017ffffc0000040 ffff88810094f040 0000000000000000
dead000000000001
[  417.143554] raw: 0000000000000000 0000000000030003 00000000f5000000
ffff88811aa20e01
[  417.143954] head: 0017ffffc0000040 ffff88810094f040 0000000000000000
dead000000000001
[  417.144329] head: 0000000000000000 0000000000030003 00000000f5000000
ffff88811aa20e01
[  417.144710] head: 0017ffffc0000003 ffffea0004921c01 00000000ffffffff
00000000ffffffff
[  417.145106] head: ffffffffffffffff 0000000000000000 00000000ffffffff
0000000000000008
[  417.145485] page dumped because: kasan: bad access detected

[  417.145859] Memory state around the buggy address:
[  417.146094]  ffff88812486ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
fc
[  417.146439]  ffff88812486ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
fc
[  417.146791] >ffff888124870000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fb
[  417.147145]                                      ^
[  417.147387]  ffff888124870080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fb
[  417.147751]  ffff888124870100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fb
[  417.148123]
==================================================================

First of all, we have warning in get_bvec_at() because
cursor->total_resid contains zero value. And, finally,
we have crash in ceph_msg_data_advance() because
cursor->data is NULL. It means that get_bvec_at()
receives not initialized ceph_msg_data_cursor structure
because data is NULL and total_resid contains zero.

Moreover, we don't have likewise issue for the case of
Ceph msgr1 protocol because ceph_msg_data_cursor_init()
has been called before reading sparse data.

This patch adds calling of ceph_msg_data_cursor_init()
in the beginning of process_v2_sparse_read() with
the goal to guarantee that logic of reading sparse data
works correctly for the case of Ceph msgr2 protocol.

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/73152
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:59 +09:00
Marc Kleine-Budde
b6aa7c5e29 can: sun4i_can: sun4i_can_interrupt(): fix max irq loop handling
commit 76544beea7 upstream.

Reading the interrupt register `SUN4I_REG_INT_ADDR` causes all of its bits
to be reset. If we ever reach the condition of handling more than
`SUN4I_CAN_MAX_IRQ` IRQs, we will have read the register and reset all its
bits but without actually handling the interrupt inside of the loop body.

This may, among other issues, cause us to never `netif_wake_queue()` again
after a transmission interrupt.

Fixes: 0738eff14d ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Cc: stable@vger.kernel.org
Co-developed-by: Thomas Mühlbacher <tmuehlbacher@posteo.net>
Signed-off-by: Thomas Mühlbacher <tmuehlbacher@posteo.net>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251116-sun4i-fix-loop-v1-1-3d76d3f81950@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:59 +09:00
Thomas Mühlbacher
0f7213b8fb can: sja1000: fix max irq loop handling
commit 30db4451c7 upstream.

Reading the interrupt register `SJA1000_IR` causes all of its bits to be
reset. If we ever reach the condition of handling more than
`SJA1000_MAX_IRQ` IRQs, we will have read the register and reset all its
bits but without actually handling the interrupt inside of the loop
body.

This may, among other issues, cause us to never `netif_wake_queue()`
again after a transmission interrupt.

Fixes: 429da1cc84 ("can: Driver for the SJA1000 CAN controller")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Mühlbacher <tmuehlbacher@posteo.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251115153437.11419-1-tmuehlbacher@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:59 +09:00
Douglas Anderson
2fa09fe98c Bluetooth: btusb: mediatek: Avoid btusb_mtk_claim_iso_intf() NULL deref
commit c884a0b27b upstream.

In btusb_mtk_setup(), we set `btmtk_data->isopkt_intf` to:
  usb_ifnum_to_if(data->udev, MTK_ISO_IFNUM)

That function can return NULL in some cases. Even when it returns
NULL, though, we still go on to call btusb_mtk_claim_iso_intf().

As of commit e9087e8288 ("Bluetooth: btusb: mediatek: Add locks for
usb_driver_claim_interface()"), calling btusb_mtk_claim_iso_intf()
when `btmtk_data->isopkt_intf` is NULL will cause a crash because
we'll end up passing a bad pointer to device_lock(). Prior to that
commit we'd pass the NULL pointer directly to
usb_driver_claim_interface() which would detect it and return an
error, which was handled.

Resolve the crash in btusb_mtk_claim_iso_intf() by adding a NULL check
at the start of the function. This makes the code handle a NULL
`btmtk_data->isopkt_intf` the same way it did before the problematic
commit (just with a slight change to the error message printed).

Reported-by: IncogCyberpunk <incogcyberpunk@proton.me>
Closes: http://lore.kernel.org/r/a380d061-479e-4713-bddd-1d6571ca7e86@leemhuis.info
Fixes: e9087e8288 ("Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()")
Cc: stable@vger.kernel.org
Tested-by: IncogCyberpunk <incogcyberpunk@proton.me>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:59 +09:00
Gui-Dong Han
667ac86882 atm/fore200e: Fix possible data race in fore200e_open()
commit 82fca3d8a4 upstream.

Protect access to fore200e->available_cell_rate with rate_mtx lock in the
error handling path of fore200e_open() to prevent a data race.

The field fore200e->available_cell_rate is a shared resource used to track
available bandwidth. It is concurrently accessed by fore200e_open(),
fore200e_close(), and fore200e_change_qos().

In fore200e_open(), the lock rate_mtx is correctly held when subtracting
vcc->qos.txtp.max_pcr from available_cell_rate to reserve bandwidth.
However, if the subsequent call to fore200e_activate_vcin() fails, the
function restores the reserved bandwidth by adding back to
available_cell_rate without holding the lock.

This introduces a race condition because available_cell_rate is a global
device resource shared across all VCCs. If the error path in
fore200e_open() executes concurrently with operations like
fore200e_close() or fore200e_change_qos() on other VCCs, a
read-modify-write race occurs.

Specifically, the error path reads the rate without the lock. If another
CPU acquires the lock and modifies the rate (e.g., releasing bandwidth in
fore200e_close()) between this read and the subsequent write, the error
path will overwrite the concurrent update with a stale value. This results
in incorrect bandwidth accounting.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251120120657.2462194-1-hanguidong02@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:59 +09:00
Maarten Zanders
df4630d02b ARM: dts: nxp: imx6ul: correct SAI3 interrupt line
commit 1b03346314 upstream.

The i.MX6UL reference manual lists two possible interrupt lines for
SAI3 (56 and 57, offset +32). The current device tree entry uses
the first one (24), which prevents IRQs from being handled properly.

Use the second interrupt line (25), which does allow interrupts
to work as expected.

Fixes: 36e2edf6ac ("ARM: dts: imx6ul: add sai support")
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:59 +09:00
Xu Yang
b543d79b4f arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity
commit e89ee35567 upstream.

According to the board design, set SEL to high means flipped
connection (TX2/RX2). And the TCPM will output logical 1 if it needs
flipped connection. So switch to active high for select-gpios.
The EN pin on mux chip is low active, so switch to active low for
enable-gpios too.

Fixes: b237975b2c ("arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:59 +09:00
Frank Li
8e93451fe5 arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos
commit 5b6677d645 upstream.

Swap interrupt numbers of eqos because the below commit just swap
interrupt-names and missed swap interrupts also.

The driver (drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c) use
interrupt-names to get irq numbers.

Fixes: f29c19a6e4 ("arm64: dts: imx8dxl-ss-conn: Fix Ethernet interrupt-names order")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Alexander Dahl <ada@thorsis.com>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Ivan Zhaldak
866df92e70 ALSA: usb-audio: Add DSD quirk for LEAK Stereo 230
commit c83fc13960 upstream.

Integrated amplifier LEAK Stereo 230 by IAG Limited has built-in
ESS9038Q2M DAC served by XMOS controller. It supports both DSD Native
and DSD-over-PCM (DoP) operational modes. But it doesn't work properly
by default and tries DSD-to-PCM conversion. USB quirks below allow it
to operate as designed.

Add DSD_RAW quirk flag for IAG Limited devices (vendor ID 0x2622)
Add DSD format quirk for LEAK Stereo 230 (USB ID 0x2622:0x0061)

Signed-off-by: Ivan Zhaldak <i.v.zhaldak@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251117125848.30769-1-i.v.zhaldak@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Deepanshu Kartikey
922fdd0b75 tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs
commit b042fdf18e upstream.

When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel
calls vm_ops->close on each portion. For trace buffer mappings, this
results in ring_buffer_unmap() being called multiple times while
ring_buffer_map() was only called once.

This causes ring_buffer_unmap() to return -ENODEV on subsequent calls
because user_mapped is already 0, triggering a WARN_ON.

Trace buffer mappings cannot support partial mappings because the ring
buffer structure requires the complete buffer including the meta page.

Fix this by adding a may_split callback that returns -EINVAL to prevent
VMA splits entirely.

Cc: stable@vger.kernel.org
Fixes: cf9f0f7c4c ("tracing: Allow user-space mapping of the ring-buffer")
Link: https://patch.msgid.link/20251119064019.25904-1-kartikey406@gmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a72c325b042aae6403c7
Tested-by: syzbot+a72c325b042aae6403c7@syzkaller.appspotmail.com
Reported-by: syzbot+a72c325b042aae6403c7@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Thomas Bogendoerfer
63a93d1cd6 MIPS: mm: kmalloc tlb_vpn array to avoid stack overflow
commit 841ecc979b upstream.

Owing to Config4.MMUSizeExt and VTLB/FTLB MMU features later MIPSr2+
cores can have more than 64 TLB entries.  Therefore allocate an array
for uniquification instead of placing too an small array on the stack.

Fixes: 35ad7e1815 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Co-developed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v6.17+: 9f048fa487: MIPS: mm: Prevent a TLB shutdown on initial uniquification
Cc: stable@vger.kernel.org # v6.17+
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Maciej W. Rozycki
135178e90a MIPS: mm: Prevent a TLB shutdown on initial uniquification
commit 9f048fa487 upstream.

Depending on the particular CPU implementation a TLB shutdown may occur
if multiple matching entries are detected upon the execution of a TLBP
or the TLBWI/TLBWR instructions.  Given that we don't know what entries
we have been handed we need to be very careful with the initial TLB
setup and avoid all these instructions.

Therefore read all the TLB entries one by one with the TLBR instruction,
bypassing the content addressing logic, and truncate any large pages in
place so as to avoid a case in the second step where an incoming entry
for a large page at a lower address overlaps with a replacement entry
chosen at another index.  Then preinitialize the TLB using addresses
outside our usual unique range and avoiding clashes with any entries
received, before making the usual call to local_flush_tlb_all().

This fixes (at least) R4x00 cores if TLBP hits multiple matching TLB
entries (SGI IP22 PROM for examples sets up all TLBs to the same virtual
address).

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 35ad7e1815 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # Boston I6400, M5150 sim
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
ChiYuan Huang
45abbbdb46 iio: adc: rtq6056: Correct the sign bit index
commit 9b45744bf0 upstream.

The vshunt/current reported register is a signed 16bit integer. The
sign bit index should be '15', not '16'.

Fixes: 4396f45d21 ("iio: adc: Add rtq6056 support")
Reported-by: Andy Hsu <andy_ya_hsu@wiwynn.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
David Lechner
6656fbfee4 iio: adc: ad7280a: fix ad7280_store_balance_timer()
commit bd886cdcbf upstream.

Use correct argument to iio_str_to_fixpoint() to parse 3 decimal places.

iio_str_to_fixpoint() has a bit of an unintuitive API where the
fract_mult parameter is the multiplier of the first decimal place as if
it was already an integer.  So to get 3 decimal places, fract_mult must
be 100 rather than 1000.

Fixes: 96ccdbc07a ("staging:iio:adc:ad7280a: Standardize extended ABI naming")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Valek Andrej
96a474c35d iio: accel: fix ADXL355 startup race condition
commit c92c1bc408 upstream.

There is an race-condition where device is not full working after SW reset.
Therefore it's necessary to wait some time after reset and verify shadow
registers values by reading and comparing the values before/after reset.
This mechanism is described in datasheet at least from revision D.

Fixes: 12ed27863e ("iio: accel: Add driver support for ADXL355")
Signed-off-by: Valek Andrej <andrej.v@skyrain.eu>
Signed-off-by: Kessler Markus <markus.kessler@hilti.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Linus Walleij
65ad4ed983 iio: accel: bmc150: Fix irq assumption regression
commit 3aa385a9c7 upstream.

The code in bmc150-accel-core.c unconditionally calls
bmc150_accel_set_interrupt() in the iio_buffer_setup_ops,
such as on the runtime PM resume path giving a kernel
splat like this if the device has no interrupts:

Unable to handle kernel NULL pointer dereference at virtual
  address 00000001 when read

PC is at bmc150_accel_set_interrupt+0x98/0x194
LR is at __pm_runtime_resume+0x5c/0x64
(...)
Call trace:
bmc150_accel_set_interrupt from bmc150_accel_buffer_postenable+0x40/0x108
bmc150_accel_buffer_postenable from __iio_update_buffers+0xbe0/0xcbc
__iio_update_buffers from enable_store+0x84/0xc8
enable_store from kernfs_fop_write_iter+0x154/0x1b4

This bug seems to have been in the driver since the beginning,
but it only manifests recently, I do not know why.

Store the IRQ number in the state struct, as this is a common
pattern in other drivers, then use this to determine if we have
IRQ support or not.

Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Olivier Moysan
9ef53b3540 iio: adc: stm32-dfsdm: fix st,adc-alt-channel property handling
commit 8a6b7989ff upstream.

Initially st,adc-alt-channel property was defined as an enum in the DFSDM
binding. The DFSDM binding has been changed to use the new IIO backend
framework, along with the adoption of IIO generic channels.
In this new binding st,adc-alt-channel is defined as a boolean property,
but it is still handled has an enum in DFSDM driver.
Fix st,adc-alt-channel property handling in DFSDM driver.

Fixes: 3208fa0cd9 ("iio: adc: stm32-dfsdm: adopt generic channels bindings")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Christophe JAILLET
5b82774d0e iio:common:ssp_sensors: Fix an error handling path ssp_probe()
commit 21553258b9 upstream.

If an error occurs after a successful mfd_add_devices() call, it should be
undone by a corresponding mfd_remove_devices() call, as already done in the
remove function.

Fixes: 50dd64d57e ("iio: common: ssp_sensors: Add sensorhub driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Francesco Lavra
90e8768209 iio: imu: st_lsm6dsx: fix array size for st_lsm6dsx_settings fields
commit 3af0c1fb1c upstream.

The `decimator` and `batch` fields of struct st_lsm6dsx_settings
are arrays indexed by sensor type, not by sensor hardware
identifier; moreover, the `batch` field is only used for the
accelerometer and gyroscope.
Change the array size for `decimator` from ST_LSM6DSX_MAX_ID to
ST_LSM6DSX_ID_MAX, and change the array size for `batch` from
ST_LSM6DSX_MAX_ID to 2; move the enum st_lsm6dsx_sensor_id
definition so that the ST_LSM6DSX_ID_MAX value is usable within
the struct st_lsm6dsx_settings definition.

Fixes: 801a6e0af0 ("iio: imu: st_lsm6dsx: add support to LSM6DSO")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Dimitri Fedrau
9434c58b8e iio: humditiy: hdc3020: fix units for thresholds and hysteresis
commit cb372b4f46 upstream.

According to the ABI the units after application of scale and offset are
milli degree celsius for temperature thresholds and milli percent for
relative humidity thresholds. Currently the resulting units are degree
celsius for temperature thresholds and hysteresis and percent for relative
humidity thresholds and hysteresis. Change scale factor to fix this issue.

Fixes: 3ad0e7e5f0 ("iio: humidity: hdc3020: add threshold events support")
Reported-by: Chris Lesiak <chris.lesiak@licorbio.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:58 +09:00
Dimitri Fedrau
70e1c26f8c iio: humditiy: hdc3020: fix units for temperature and humidity measurement
commit 7b8dc11c0a upstream.

According to the ABI the units after application of scale and offset are
milli degrees for temperature measurements and milli percent for relative
humidity measurements. Currently the resulting units are degree celsius for
temperature measurements and percent for relative humidity measurements.
Change scale factor to fix this issue.

Fixes: c9180b8e39 ("iio: humidity: Add driver for ti HDC302x humidity sensors")
Reported-by: Chris Lesiak <chris.lesiak@licorbio.com>
Suggested-by: Chris Lesiak <chris.lesiak@licorbio.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:57 +09:00
Nuno Sá
af8a7abca4 iio: buffer: support getting dma channel from the buffer
commit a514bb109e upstream.

Add a new buffer accessor .get_dma_dev() in order to get the
struct device responsible for actually providing the dma channel. We
cannot assume that we can use the parent of the IIO device for mapping
the DMA buffer. This becomes important on systems (like the Xilinx/AMD
zynqMP Ultrascale) where memory (or part of it) is mapped above the
32 bit range. On such systems and given that a device by default has
a dma mask of 32 bits we would then need to rely on bounce buffers (to
swiotlb) for mapping memory above the dma mask limit.

In the process, add an iio_buffer_get_dma_dev() helper function to get
the proper DMA device.

Cc: stable@vger.kernel.org
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:57 +09:00
Nuno Sá
6717a94824 iio: buffer-dmaengine: enable .get_dma_dev()
commit 3db847df99 upstream.

Wire up the .get_dma_dev() callback to use the DMA buffer infrastructure's
implementation. This ensures that DMABUF operations use the correct DMA
device for mapping, which is essential for proper operation on systems
where memory is mapped above the 32-bit range.

Without this callback, the core would fall back to using the IIO device's
parent, which may not have the appropriate DMA mask configuration for
high memory access.

Fixes: 7a86d46998 ("iio: buffer-dmaengine: Support new DMABUF based userspace API")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:57 +09:00
Nuno Sá
61f136211d iio: buffer-dma: support getting the DMA channel
commit f9c198c3cc upstream.

Implement the .get_dma_dev() callback for DMA buffers by returning the
device that owns the DMA channel. This allows the core DMABUF
infrastructure to properly map DMA buffers using the correct device,
avoiding the need for bounce buffers on systems where memory is mapped
above the 32-bit range.

The function returns the DMA queue's device, which is the actual device
responsible for DMA operations in buffer-dma implementations.

Cc: stable@vger.kernel.org
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:57 +09:00
Jiri Olsa
0cc09278c3 Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"
commit 6d08340d1e upstream.

This reverts commit 83f44ae0f8.

Currently we store initial stacktrace entry twice for non-HW ot_regs, which
means callers that fail perf_hw_regs(regs) condition in perf_callchain_kernel.

It's easy to reproduce this bpftrace:

  # bpftrace -e 'tracepoint:sched:sched_process_exec { print(kstack()); }'
  Attaching 1 probe...

        bprm_execve+1767
        bprm_execve+1767
        do_execveat_common.isra.0+425
        __x64_sys_execve+56
        do_syscall_64+133
        entry_SYSCALL_64_after_hwframe+118

When perf_callchain_kernel calls unwind_start with first_frame, AFAICS
we do not skip regs->ip, but it's added as part of the unwind process.
Hence reverting the extra perf_callchain_store for non-hw regs leg.

I was not able to bisect this, so I'm not really sure why this was needed
in v5.2 and why it's not working anymore, but I could see double entries
as far as v5.10.

I did the test for both ORC and framepointer unwind with and without the
this fix and except for the initial entry the stacktraces are the same.

Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:57 +09:00
Alex Deucher
a2b16ee991 Revert "drm/amd/display: Move setup_stream_attribute"
commit 3126c9ccb4 upstream.

This reverts commit 2681bf4ae8.

This results in a blank screen on the HDMI port on some systems.
Revert for now so as not to regress 6.18, can be addressed
in 6.19 once the issue is root caused.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4652
Cc: Sunpeng.Li@amd.com
Cc: ivan.lipski@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d0e9de7a81)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07 06:24:57 +09:00
Hang Zhou
e31194bf49 spi: bcm63xx: fix premature CS deassertion on RX-only transactions
[ Upstream commit fd9862f726 ]

On BCM6358 (and also observed on BCM6368) the controller appears to
only generate as many SPI clocks as bytes that have been written into
the TX FIFO. For RX-only transfers the driver programs the transfer
length in SPI_MSG_CTL but does not write anything into the FIFO, so
chip select is deasserted early and the RX transfer segment is never
fully clocked in.

A concrete failing case is a three-transfer MAC address read from
SPI-NOR:
  - TX 0x03 (read command)
  - TX 3-byte address
  - RX 6 bytes (MAC)

In contrast, a two-transfer JEDEC-ID read (0x9f + 6-byte RX) works
because the driver uses prepend_len and writes dummy bytes into the
TX FIFO for the RX part.

Fix this by writing 0xff dummy bytes into the TX FIFO for RX-only
segments so that the number of bytes written to the FIFO matches the
total message length seen by the controller.

Fixes: b17de07606 ("spi/bcm63xx: work around inability to keep CS up")

Signed-off-by: Hang Zhou <929513338@qq.com>
Link: https://patch.msgid.link/tencent_7AC88FCB3076489A4A7E6C2163DF1ACF8D06@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:57 +09:00
Andy Shevchenko
74d016b990 spi: nxp-fspi: Propagate fwnode in ACPI case as well
[ Upstream commit 40ad64ac25 ]

Propagate fwnode of the ACPI device to the SPI controller Linux device.
Currently only OF case propagates fwnode to the controller.

While at it, replace several calls to dev_fwnode() with a single one
cached in a local variable, and unify checks for fwnode type by using
is_*_node() APIs.

Fixes: 55ab8487e0 ("spi: spi-nxp-fspi: Add ACPI support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20251126202501.2319679-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:57 +09:00
Haibo Chen
29504b7304 spi: spi-nxp-fspi: Add OCT-DTR mode support
[ Upstream commit 0f67557763 ]

Add OCT-DTR mode support in default, since flexspi do not supports
swapping bytes on a 16 bit boundary in OCT-DTR mode, so mark swap16
as false.

lx2160a do not support DQS, so add a quirk to disable DTR mode for this
platform.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250917-flexspi-ddr-v2-5-bb9fe2a01889@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 40ad64ac25 ("spi: nxp-fspi: Propagate fwnode in ACPI case as well")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:57 +09:00
Haibo Chen
96ff82494b spi: spi-nxp-fspi: remove the goto in probe
[ Upstream commit 48900813ab ]

Remove all the goto in probe to simplify the driver.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250428-flexspipatch-v3-1-61d5e8f591bc@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 40ad64ac25 ("spi: nxp-fspi: Propagate fwnode in ACPI case as well")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:57 +09:00
Miquel Raynal
f08573eb64 spi: nxp-fspi: Support per spi-mem operation frequency switches
[ Upstream commit 26851cf65f ]

Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.

The per-operation frequency capability is thus advertised to the spi-mem
core.

Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-12-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 40ad64ac25 ("spi: nxp-fspi: Propagate fwnode in ACPI case as well")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:57 +09:00
Miquel Raynal
c02d4deb82 spi: spi-mem: Add a new controller capability
[ Upstream commit 1248c9b8d5 ]

There are spi devices with multiple frequency limitations depending on
the invoked command. We probably do not want to afford running at the
lowest supported frequency all the time, so if we want to get the most
of our hardware, we need to allow per-operation frequency limitations.

Among all the SPI memory controllers, I believe all are capable of
changing the spi frequency on the fly. Some of the drivers do not make
any frequency setup though. And some others will derive a per chip
prescaler value which will be used forever.

Actually changing the frequency on the fly is something new in Linux, so
we need to carefully flag the drivers which do and do not support it. A
controller capability is created for that, and the presence for this
capability will always be checked before accepting such pattern.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-2-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 40ad64ac25 ("spi: nxp-fspi: Propagate fwnode in ACPI case as well")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:57 +09:00
Miquel Raynal
0941b7cdfc spi: spi-mem: Extend spi-mem operations with a per-operation maximum frequency
[ Upstream commit 0fefeade90 ]

In the spi subsystem, the bus frequency is derived as follows:
- the controller may expose a minimum and maximum operating frequency
- the hardware description, through the spi peripheral properties,
  advise what is the maximum acceptable frequency from a device/wiring
  point of view.
Transfers must be observed at a frequency which fits both (so in
practice, the lowest maximum).

Actually, this second point mixes two information and already takes the
lowest frequency among:
- what the spi device is capable of (what is written in the component
  datasheet)
- what the wiring allows (electromagnetic sensibility, crossovers,
  terminations, antenna effect, etc).

This logic works until spi devices are no longer capable of sustaining
their highest frequency regardless of the operation. Spi memories are
typically subject to such variation. Some devices are capable of
spitting their internally stored data (essentially in read mode) at a
very fast rate, typically up to 166MHz on Winbond SPI-NAND chips, using
"fast" commands. However, some of the low-end operations, such as
regular page read-from-cache commands, are more limited and can only be
executed at 54MHz at most. This is currently a problem in the SPI-NAND
subsystem. Another situation, even if not yet supported, will be with
DTR commands, when the data is latched on both edges of the clock. The
same chips as mentioned previously are in this case limited to
80MHz. Yet another example might be continuous reads, which, under
certain circumstances, can also run at most at 104 or 120MHz.

As a matter of fact, the "one frequency per chip" policy is outdated and
more fine grain configuration is needed: we need to allow per-operation
frequency limitations. So far, all datasheets I encountered advertise a
maximum default frequency, which need to be lowered for certain specific
operations. So based on the current infrastructure, we can still expect
firmware (device trees in general) to continued advertising the same
maximum speed which is a mix between the PCB limitations and the chip
maximum capability, and expect per-operation lower frequencies when this
is relevant.

Add a `struct spi_mem_op` member to carry this information. Not
providing this field explicitly from upper layers means that there is no
further constraint and the default spi device maximum speed will be
carried instead. The SPI_MEM_OP() macro is also expanded with an
optional frequency argument, because virtually all operations can be
subject to such a limitation, and this will allow for a smooth and
discrete transition.

For controller drivers which do not implement the spi-mem interface, the
per-transfer speed is also set acordingly to a lower (than the maximum
default) speed when relevant.

Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-1-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 40ad64ac25 ("spi: nxp-fspi: Propagate fwnode in ACPI case as well")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:57 +09:00
Tudor Ambarus
698c2abf52 spi: spi-mem: Allow specifying the byte order in Octal DTR mode
[ Upstream commit 030ace430a ]

There are NOR flashes (Macronix) that swap the bytes on a 16-bit
boundary when configured in Octal DTR mode. The byte order of
16-bit words is swapped when read or written in Octal Double
Transfer Rate (DTR) mode compared to Single Transfer Rate (STR)
modes. If one writes D0 D1 D2 D3 bytes using 1-1-1 mode, and uses
8D-8D-8D SPI mode for reading, it will read back D1 D0 D3 D2.
Swapping the bytes may introduce some endianness problems. It can
affect the boot sequence if the entire boot sequence is not handled
in either 8D-8D-8D mode or 1-1-1 mode. Therefore, it is necessary
to swap the bytes back to ensure the same byte order as in STR modes.
Fortunately there are controllers that could swap the bytes back at
runtime, addressing the flash's endianness requirements. Provide a
way for the upper layers to specify the byte order in Octal DTR mode.

Merge Tudor's patch and add modifications for suiting newer version
of Linux kernel.

Suggested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw>
Signed-off-by: AlvinZhou <alvinzhou@mxic.com.tw>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240926141956.2386374-3-alvinzhou.tw@gmail.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Stable-dep-of: 40ad64ac25 ("spi: nxp-fspi: Propagate fwnode in ACPI case as well")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Haotian Zhang
1f4a8954c6 spi: amlogic-spifc-a1: Handle devm_pm_runtime_enable() errors
[ Upstream commit a90903c2a3 ]

devm_pm_runtime_enable() can fail due to memory allocation. The current
code ignores its return value, potentially causing runtime PM operations
to fail silently after autosuspend configuration.

Check the return value of devm_pm_runtime_enable() and return on failure.

Fixes: 909fac05b9 ("spi: add support for Amlogic A1 SPI Flash Controller")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251124015852.937-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Francesco Lavra
6e5ee3c217 spi: tegra114: remove Kconfig dependency on TEGRA20_APB_DMA
[ Upstream commit 3dcf44ab56 ]

This driver runs also on Tegra SoCs without a Tegra20 APB DMA controller
(e.g. Tegra234).
Remove the Kconfig dependency on TEGRA20_APB_DMA; in addition, amend the
help text to reflect the fact that this driver works on SoCs different from
Tegra114.

Fixes: bb9667d818 ("arm64: tegra: Add SPI device tree nodes for Tegra234")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20251126095027.4102004-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Andrei Vagin
4a16b2a0c1 fs/namespace: fix reference leak in grab_requested_mnt_ns
[ Upstream commit 7b6dcd9bfd ]

lookup_mnt_ns() already takes a reference on mnt_ns.
grab_requested_mnt_ns() doesn't need to take an extra reference.

Fixes: 78f0e33cd6 ("fs/namespace: correctly handle errors returned by grab_requested_mnt_ns")
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://patch.msgid.link/20251122071953.3053755-1-avagin@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Jamie Iles
1080ed39ea mailbox: pcc: don't zero error register
[ Upstream commit ff0e4d4c97 ]

The error status mask for a type 3/4 subspace is used for reading the
error status, and the bitwise inverse is used for clearing the error
with the intent being to preserve any of the non-error bits.  However,
we were previously applying the mask to extract the status and then
applying the inverse to the result which ended up clearing all bits.

Instead, store the inverse mask in the preserve mask and then use that
on the original value read from the error status so that only the error
is cleared.

Fixes: c45ded7e11 ("mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)")
Signed-off-by: Jamie Iles <jamie.iles@oss.qualcomm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Sudeep Holla
733e3d0c1a mailbox: pcc: Refactor error handling in irq handler into separate function
[ Upstream commit 3a675f5041 ]

The existing error handling logic in pcc_mbox_irq() is intermixed with the
main flow of the function. The command complete check and the complete
complete update/acknowledgment are nicely factored into separate functions.

Moves error detection and clearing logic into a separate function called:
pcc_mbox_error_check_and_clear() by extracting error-handling logic from
pcc_mbox_irq().

This ensures error checking and clearing are handled separately and it
improves maintainability by keeping the IRQ handler focused on processing
events.

Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Stable-dep-of: ff0e4d4c97 ("mailbox: pcc: don't zero error register")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Jason-JH Lin
ba7a25411c mailbox: mtk-cmdq: Refine DMA address handling for the command buffer
[ Upstream commit a195c7ccfb ]

GCE can only fetch the command buffer address from a 32-bit register.
Some SoCs support a 35-bit command buffer address for GCE, which
requires a right shift of 3 bits before setting the address into
the 32-bit register. A comment has been added to the header of
cmdq_get_shift_pa() to explain this requirement.

To prevent the GCE command buffer address from being DMA mapped beyond
its supported bit range, the DMA bit mask for the device is set during
initialization.

Additionally, to ensure the correct shift is applied when setting or
reading the register that stores the GCE command buffer address,
new APIs, cmdq_convert_gce_addr() and cmdq_revert_gce_addr(), have
been introduced for consistent operations on this register.

The variable type for the command buffer address has been standardized
to dma_addr_t to prevent handling issues caused by type mismatches.

Fixes: 0858fde496 ("mailbox: cmdq: variablize address shift in platform")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Haotian Zhang
f73d41f2a1 mailbox: mailbox-test: Fix debugfs_create_dir error checking
[ Upstream commit 3acf1028f5 ]

The debugfs_create_dir() function returns ERR_PTR() on error, not NULL.
The current null-check fails to catch errors.

Use IS_ERR() to correctly check for errors.

Fixes: 8ea4484d0c ("mailbox: Add generic mechanism for testing Mailbox Controllers")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Haotian Zhang
779a422b45 usb: gadget: renesas_usbf: Handle devm_pm_runtime_enable() errors
[ Upstream commit 74851fbb6d ]

devm_pm_runtime_enable() can fail due to memory allocation.
The current code ignores its return value, potentially causing
pm_runtime_resume_and_get() to operate on uninitialized runtime
PM state.

Check the return value of devm_pm_runtime_enable() and return on failure.

Fixes: 3e6e14ffde ("usb: gadget: udc: add Renesas RZ/N1 USBF controller support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251124022215.1619-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Mario Tesi
051e941285 iio: st_lsm6dsx: Fixed calibrated timestamp calculation
[ Upstream commit 8abbf45fcd ]

The calibrated timestamp is calculated from the nominal value using the
formula:
  ts_gain[ns] ≈ ts_sensitivity - (ts_trim_coeff * val) / 1000.

The values of ts_sensitivity and ts_trim_coeff are not the same for all
devices, so it is necessary to differentiate them based on the part name.
For the correct values please consult the relevant AN.

Fixes: cb3b6b8e1b ("iio: imu: st_lsm6dsx: add odr calibration feature")
Signed-off-by: Mario Tesi <mario.tesi@st.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Wei Fang
4c6c2cf740 net: fec: do not register PPS event for PEROUT
[ Upstream commit 9a060d0fac ]

There are currently two situations that can trigger the PTP interrupt,
one is the PPS event, the other is the PEROUT event. However, the irq
handler fec_pps_interrupt() does not check the irq event type and
directly registers a PPS event into the system, but the event may be
a PEROUT event. This is incorrect because PEROUT is an output signal,
while PPS is the input of the kernel PPS system. Therefore, add a check
for the event type, if pps_enable is true, it means that the current
event is a PPS event, and then the PPS event is registered.

Fixes: 350749b909 ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Wei Fang
ca2964a7cb net: fec: do not allow enabling PPS and PEROUT simultaneously
[ Upstream commit c0a1f3d7e1 ]

In the current driver, PPS and PEROUT use the same channel to generate
the events, so they cannot be enabled at the same time. Otherwise, the
later configuration will overwrite the earlier configuration. Therefore,
when configuring PPS, the driver will check whether PEROUT is enabled.
Similarly, when configuring PEROUT, the driver will check whether PPS
is enabled.

Fixes: 350749b909 ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-4-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Wei Fang
10bc6ce79e net: fec: do not update PEROUT if it is enabled
[ Upstream commit e97faa0c20 ]

If the previously set PEROUT is already active, updating it will cause
the new PEROUT to start immediately instead of at the specified time.
This is because fep->reload_period is updated whithout check whether
the PEROUT is enabled, and the old PEROUT is not disabled. Therefore,
the pulse period will be updated immediately in the pulse interrupt
handler fec_pps_interrupt().

Currently, the driver does not support directly updating PEROUT and it
will make the logic be more complicated. To fix the current issue, add
a check before enabling the PEROUT, the driver will return an error if
PEROUT is enabled. If users wants to update a new PEROUT, they should
disable the old PEROUT first.

Fixes: 350749b909 ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00
Wei Fang
18a474a325 net: fec: cancel perout_timer when PEROUT is disabled
[ Upstream commit 50caa74468 ]

The PEROUT allows the user to set a specified future time to output the
periodic signal. If the future time is far from the current time, the FEC
driver will use hrtimer to configure PEROUT one second before the future
time. However, the hrtimer will not be canceled if the PEROUT is disabled
before the hrtimer expires. So the PEROUT will be configured when the
hrtimer expires, which is not as expected. Therefore, cancel the hrtimer
in fec_ptp_pps_disable() to fix this issue.

Fixes: 350749b909 ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-2-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07 06:24:56 +09:00