rk_set_clk_tx_rate() is passed the interface mode from phylink which
will be the same as bsp_priv->phy_iface. Use the passed-in interface
mode rather than bsp_priv->phy_iface.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vLgNA-0000000FMjN-0DSS@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: pass struct device to init/exit
Rather than passing the platform device to the ->init() and ->exit()
methods, make these methods useful for other devices by passing the
struct device instead. Update the implementations appropriately for
this change.
Move the calls for these methods into the core driver's probe and
remove methods from the stmmac_platform layer.
Convert dwmac-rk to use ->init() and ->exit().
====================
Link: https://patch.msgid.link/aR2V0Kib7j0L4FNN@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert rk to use the init() and exit() methods for powering up and
down the device. This allows us to use the pltfr versions of probe()
and remove().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vLf2e-0000000FMNN-1Xnh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the probe/remove time calling of the init()/exit() methods in
the platform data to the main driver probe/remove functions. This
allows them to be used by non-platform_device based drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vLf2Z-0000000FMNH-0xPV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As struct plat_stmmacenet_data is not platform_device specific, pass
a struct device into the init() and exit() methods to allow them to
become independent of the underlying device.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vLf2U-0000000FMN2-0SLg@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: tcp_rcvbuf_grow() changes
First pach is minor and moves tcp_moderate_rcvbuf in appropriate group.
Second patch is another attempt to keep small sk->sk_rcvbuf for DC
(small RT) TCP flows for optimal performance.
====================
Link: https://patch.msgid.link/20251119084813.3684576-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysctl_tcp_moderate_rcvbuf is only used from tcp_rcvbuf_grow().
Move it to netns_ipv4_read_rx group.
Remove various CACHELINE_ASSERT_GROUP_SIZE() from netns_ipv4_struct_check(),
as they have no real benefit but cause pain for all changes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251119084813.3684576-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Buday Csaba says:
====================
net: mdio: improve reset handling of mdio devices
This patchset refactors and slightly improves the reset handling of
`mdio_device`.
The patches were split from a larger series, discussed previously in the
links below.
The difference between v2 and v3, is that the helper function declarations
have been moved to a new header file: drivers/net/phy/mdio-private.h
See links for the previous versions, and for the now separate leak fix.
====================
Link: https://patch.msgid.link/cover.1763473655.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change fwnode_property_read_u32() in mdio_device_register_reset()
to device_property_read_u32(), which is more appropriate here.
Make mdio_device_unregister_reset() truly reverse
mdio_device_register_reset() by setting the internal fields to
their default values.
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/641df1488517ae71ba10158ec1e38424211d8651.1763473655.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unify the handling of the per device reset properties for
`mdio_device`.
Merge mdio_device_register_gpiod() and mdio_device_register_reset()
into mdio_device_register_reset(), that handles both
reset-controllers and reset-gpios.
Move reading of the reset firmware properties (reset-assert-us,
reset-deassert-us) from fwnode_mdio.c to mdio_device_register_reset(),
so all reset related initialization code is kept in one place.
Introduce mdio_device_unregister_reset() to release the associated
resources.
These changes make tracking the reset properties easier.
Added kernel-doc for mdio_device_register/unregister_reset().
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/17c216efd7a47be17db104378b6aacfc8741d8b9.1763473655.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The functions mdiobus_register_gpiod() and mdiobus_register_reset()
handle the mdio device reset initialization, which belong to
mdio_device.c.
Move them from mdio_bus.c to mdio_device.c, and rename them to match
the corresponding source file: mdio_device_register_gpio() and
mdio_device_register_reset().
Remove 'static' qualifiers and declare them in
drivers/net/phy/mdio-private.h (new header file).
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/5f684838ee897130f21b21beb07695eea4af8988.1763473655.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346 ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=89Xl
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures"
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
During connect(), acting on a signal/timeout by disconnecting an already
established socket leads to several issues:
1. connect() invoking vsock_transport_cancel_pkt() ->
virtio_transport_purge_skbs() may race with sendmsg() invoking
virtio_transport_get_credit(). This results in a permanently elevated
`vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.
2. connect() resetting a connected socket's state may race with socket
being placed in a sockmap. A disconnected socket remaining in a sockmap
breaks sockmap's assumptions. And gives rise to WARNs.
3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a
transport change/drop after TCP_ESTABLISHED. Which poses a problem for
any simultaneous sendmsg() or connect() and may result in a
use-after-free/null-ptr-deref.
Do not disconnect socket on signal/timeout. Keep the logic for unconnected
sockets: they don't linger, can't be placed in a sockmap, are rejected by
sendmsg().
[1]: https://lore.kernel.org/netdev/e07fd95c-9a38-4eea-9638-133e38c2ec9b@rbox.co/
[2]: https://lore.kernel.org/netdev/20250317-vsock-trans-signal-race-v4-0-fc8837f3f1d4@rbox.co/
[3]: https://lore.kernel.org/netdev/60f1b7db-3099-4f6a-875e-af9f6ef194f6@rbox.co/
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251119-vsock-interrupted-connect-v2-1-70734cf1233f@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit
bc0c3405ab ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
Fixes: 760c295e0e ("be2net: Support for OS2BMC.")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20251119105015.194501-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman says:
====================
YNL CLI --list-attrs argument
While experimenting with the YNL CLI, I found the process of going back
and forth to examine the YAML spec files in order to figure out how to
use each command quite tiring.
The addition of --list-attrs helps by providing all information needed
directly in the tool. I figured others would likely find it useful as
well.
v1: https://lore.kernel.org/all/20251116192845.1693119-1-gal@nvidia.com/
====================
Link: https://patch.msgid.link/20251118143208.2380814-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enhance the --list-attrs option to recursively display nested attributes
instead of just showing "nest" as the type.
Nested attributes now show their attribute set name and expand to
display their contents.
# ./cli.py --family ethtool --list-attrs rss-get
[..]
Do request attributes:
- header: nest -> header
- dev-index: u32
- dev-name: string
- flags: u32 (enum: header-flags)
- phy-index: u32
- context: u32
[..]
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251118143208.2380814-3-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a --list-attrs option to the YNL CLI that displays information about
netlink operations, including request and reply attributes.
This eliminates the need to manually inspect YAML spec files to
determine the JSON structure required for operations, or understand the
structure of the reply.
Example usage:
# ./cli.py --family netdev --list-attrs dev-get
Operation: dev-get
Get / dump information about a netdev.
Do request attributes:
- ifindex: u32
netdev ifindex
Do reply attributes:
- ifindex: u32
netdev ifindex
- xdp-features: u64 (enum: xdp-act)
Bitmask of enabled xdp-features.
- xdp-zc-max-segs: u32
max fragment count supported by ZC driver
- xdp-rx-metadata-features: u64 (enum: xdp-rx-metadata)
Bitmask of supported XDP receive metadata features. See Documentation/networking/xdp-rx-metadata.rst for more details.
- xsk-features: u64 (enum: xsk-flags)
Bitmask of enabled AF_XDP features.
Dump reply attributes:
- ifindex: u32
netdev ifindex
- xdp-features: u64 (enum: xdp-act)
Bitmask of enabled xdp-features.
- xdp-zc-max-segs: u32
max fragment count supported by ZC driver
- xdp-rx-metadata-features: u64 (enum: xdp-rx-metadata)
Bitmask of supported XDP receive metadata features. See Documentation/networking/xdp-rx-metadata.rst for more details.
- xsk-features: u64 (enum: xsk-flags)
Bitmask of enabled AF_XDP features.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251118143208.2380814-2-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Meghana Malladi says:
====================
Add AF_XDP zero copy support
This series adds AF_XDP zero coppy support to icssg driver.
Tests were performed on AM64x-EVM with xdpsock application [1].
A clear improvement is seen Transmit (txonly) and receive (rxdrop)
for 64 byte packets. 1500 byte test seems to be limited by line
rate (1G link) so no improvement seen there in packet rate
Having some issue with l2fwd as the benchmarking numbers show 0
for 64 byte packets after forwading first batch packets and I am
currently looking into it.
AF_XDP performance using 64 byte packets in Kpps.
AF_XDP performance using 64 byte packets in Kpps.
Benchmark: XDP-SKB XDP-Native XDP-Native(ZeroCopy)
rxdrop 253 473 656
txonly 350 354 855
l2fwd 178 240 0
AF_XDP performance using 1500 byte packets in Kpps.
Benchmark: XDP-SKB XDP-Native XDP-Native(ZeroCopy)
rxdrop 82 82 82
txonly 81 82 82
l2fwd 81 82 82
[1]: https://github.com/xdp-project/bpf-examples/tree/master/AF_XDP-example
v5: https://lore.kernel.org/all/20251111101523.3160680-1-m-malladi@ti.com/
====================
Link: https://patch.msgid.link/20251118135542.380574-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enable the zero copy feature flag in xdp_set_features_flag()
for a given ndev to get the AF-XDP zero copy support running
for both Tx and Rx.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-7-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use xsk_pool inside rx_chn to check if a given Rx queue id
is registered for xsk zero copy, which gets populated during
xsk enable.
Update prueth_create_xdp_rxqs to register and support two different
memory models (xsk and page) for a given Rx queue, if registered for
zero copy.
If xsk_pool is registered, allocate buffers from UMEM and map them
to the hardware Rx descriptors. In NAPI context, run the XDP program
for each packet and process the xsk buffer according to the XDP
result codes. Also allocate new set of buffers from UMEM for the
next batch of NAPI Rx processing. Add XDK_WAKEUP_RX support to support
xsk wakeup for Rx.
Move prueth_create_page_pool to prueth_init_rx_chns to avoid freeing
and re-allocating the system memory every time there is a transition
from zero copy to copy and prevents any type of memory fragmentation
or leak.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-6-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
emac_run_xdp function runs xdp program, at a given hook point
in the Rx path of the driver in NAPI context and returns
XDP return codes. In zero copy mode the driver receives
packets using UMEM frames instead of pages (native XDP).
Decouple the usage of page in this function.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-5-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use xsk_pool inside tx_chn to check if a given Tx queue id
is registered for xsk zero copy, which gets populated during
xsk enable
If xsk_pool is set, get frames from the pool in NAPI
context and submit them to the Tx channel. Tx completion
is also handled in the NAPI context.
Use PRUETH_SWDATA_XSK to recycle xsk buffers back to the
umem pool. Add XDP_WAKEUP_TX support to enable xsk_wakeup
for Tx.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement XSK NDOs (setup, wakeup) and create XSK
Rx and Tx queues. xsk_qid stores the queue id for
a given port which has been registered for zero copy
AF_XDP and used to acquire UMEM pointer if registered.
Based on the xsk_qid and the xsk_pool (umem) the driver
is either in copy or zero copy mode. In case of copy mode
the xsk_qid value will be invalid and will be set to valid
queue id when enabling zero copy. To enable zero copy, the
Rx queues are destroyed, i.e., descriptors pushed to fq
and cq are freed to remap them to xdp buffers from the umem.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Each port for a given ICSSG instance has their own set of
Tx and Rx queues. Add functions to create and destroy these
queues, which will be further used while performing ndo_bpf
operations to set up XSK Tx/Rx queues for a given port.
In the destroy Rx queue sequence add teardown wait to ensure
that all the descriptors including the TDCM (teardown completion
marker) have been serviced and freed to avoid any sort of descriptor
leaks.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=5p6s
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless-2025-11-20
A single fix for scanning on some rtw89 devices.
* tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: rtw89: hw_scan: Don't let the operating channel be last
====================
Link: https://patch.msgid.link/20251120085433.8601-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Getting module EEPROM has been supported in TXGBE SP devices, since SFP
driver has already implemented it.
Now add support to read module EEPROM for AML devices. Towards this, add
a new firmware mailbox command to get the page data.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-6-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For QSFP modules, there is a possibility that the module cannot be
identified when read I2C immediately in .ndo_open. So just set the flag
WX_FLAG_NEED_MODULE_RESET and do it in the subtask, which always wait
200 ms to identify the module. And this change has no impact on the
original adaptation.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-5-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Support to identify QSFP modules for AML 40G devices. The definition of
GPIO pins follows the design of the QSFP modules, and TXGBE_GPIOBIT_4 is
used for module present.
Meanwhile, implement phylink in XLGMII mode by default, and get the link
state from MAC link.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
QSFP supported will be introduced for AML 40G devices, the code related
to identify various modules should be renamed to more appropriate names.
And struct txgbe_hic_i2c_read used to get module information is renamed
as struct txgbe_hic_get_module_info, because another SW-FW command to
read I2C will be added later.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The L2TP stack did not reset the skb control buffer before sending the
encapsulated package.
In a setup with an ath10k radio and batman-adv over an L2TP tunnel
massive fragmentations happen sporadically if the L2TP tunnel is
established over IPv4.
L2TP might reset some of the fields in the IP control buffer, but L2TP
assumes the type of the control buffer to be of an IPv4 packet.
In case the L2TP interface is used as a batadv hardif or the packet is
an IPv6 packet, this assumption breaks.
Clear the entire control buffer to avoid such mishaps altogether.
Fixes: f77ae93904 ("[PPPOL2TP]: Reset meta-data in xmit function")
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://patch.msgid.link/20251118001619.242107-1-mail@david-bauer.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Correct RGMII delay application logic in lan937x_set_tune_adj().
The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the
new delay value. This caused the new value to be bitwise-OR'd with the
existing PORT_TUNE_ADJ field instead of replacing it.
For example, when setting the RGMII 2 TX delay on port 4, the
intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was
incorrectly OR'd with the default 0x1B (from register value 0xDA3),
leaving the delay at the wrong setting.
This patch adds the missing mask to clear the field, ensuring the
correct delay value is written. Physical measurements on the RGMII TX
lines confirm the fix, showing the delay changing from ~1ns (before
change) to ~2ns.
While testing on i.MX 8MP showed this was within the platform's timing
tolerance, it did not match the intended hardware-characterized value.
Fixes: b19ac41faa ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251114090951.4057261-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix firmware goes wrong and causes device unusable after scanning. This
issue presents under certain regulatory domain reported from end users.
-----BEGIN PGP SIGNATURE-----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=vV9X
-----END PGP SIGNATURE-----
Merge tag 'rtw-2025-11-20' of https://github.com/pkshih/rtw
Ping-Ke Shih says:
==================
rtw patches for v6.18-rc7
Fix firmware goes wrong and causes device unusable after scanning. This
issue presents under certain regulatory domain reported from end users.
==================
Link: https://patch.msgid.link/8217bee0-96c4-44c1-9593-2e9ca12eccc5@RTKEXHMBS03.realtek.com.tw
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tariq Toukan says:
====================
net/mlx5: Move notifiers outside the devlink lock
This series by Cosmin moves blocking notifier registration in the mlx5
driver outside the devlink lock during probe.
This is mostly a no-op refactoring that consists of multiple pieces.
It is necessary because upcoming code will introduce a potential locking
cycle between the devlink lock and the blocking notifier head mutexes,
so these notifiers must move out of the devlink-locked critical section.
====================
Link: https://patch.msgid.link/1763325940-1231508-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This completes the previous patches by moving notifier registration for
SF dev tables outside the devlink locked critical section in
mlx5_init_one() / mlx5_uninit_one() and into the mlx5_mdev_init() /
mlx5_mdev_uninit() functions.
This is only done for non-SFs, since SFs do not have a SF HW table
themselves.
After this patch, notifiers can grab the PF devlink lock (soon to be
necessary) without creating a locking cycle.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the SF table notifiers registration/unregistration outside of
mlx5_init_one() / mlx5_uninit_one() and into the mlx5_mdev_init() /
mlx5_mdev_uninit() functions.
This is only done for non-SFs, since SFs do not have a SF table
themselves and thus don't need notifiers.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the SF HW table notifier registration/unregistration outside of
mlx5_init_one() / mlx5_uninit_one() and into the mlx5_mdev_init() /
mlx5_mdev_uninit() functions.
This is only done for non-SFs, since SFs do not have a SF HW table
themselves.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The vhca event notifier consists of an atomic notifier for vhca state
changes (used for SF events), multiple workqueues and a blocking
notifier chain for delivering the vhca state change events for further
processing.
This patch moves the vhca notifier head outside of mlx5_init_one() /
mlx5_uninit_one() and into the mlx5_mdev_init() / mlx5_mdev_uninit()
functions.
This allows called notifiers to grab the PF devlink lock which was
previously impossible because it would create a circular lock
dependency.
mlx5_vhca_event_stop() is now called earlier in the cleanup phase and
flushes the workqueues to ensure that after the call, there are no
pending events. This simplifies the cleanup flow for vhca event
consumers.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The esw mode change notifier chain is initialized/cleaned up in
mlx5_init_one() / mlx5_uninit_one() with the devlink lock held.
Move the notifier head from the eswitch struct into mlx5_priv directly,
and initialize it outside the critical section. This will allow notifier
registration to happen earlier in the init procedure in subsequent
patches.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move event init/cleanup outside of mlx5_init_one() / mlx5_uninit_one()
and into the mlx5_mdev_init() / mlx5_mdev_uninit() functions.
By doing this, we avoid the events being reinitialized on devlink reload
and, more importantly, the events->sw_nh notifier chain becomes
available earlier in the init procedure, which will be used in
subsequent patches. This makes sense because the events struct is pure
software, independent of any HW details.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After getting the current skb in napi_skb_cache_get(), the next skb in
cache is highly likely to be used soon, so prefetch would be helpful.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251118070646.61344-5-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Replace NAPI_SKB_CACHE_HALF with NAPI_SKB_CACHE_FREE
- Only free 32 skbs in napi_skb_cache_put()
Since the first patch adjusting NAPI_SKB_CACHE_SIZE to 128, the number
of packets to be freed in the softirq was increased from 32 to 64.
Considering a subsequent net_rx_action() calling napi_poll() a few
times can easily consume the 64 available slots and we can afford
keeping a higher value of sk_buffs in per-cpu storage, decrease
NAPI_SKB_CACHE_FREE to 32 like before. So now the logic is 1) keeping
96 skbs, 2) freeing 32 skbs at one time.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251118070646.61344-4-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous value 16 is a bit conservative, so adjust it along with
NAPI_SKB_CACHE_SIZE, which can minimize triggering memory allocation
in napi_skb_cache_get*().
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251118070646.61344-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit b61785852e ("net: increase skb_defer_max default to 128")
changed the value sysctl_skb_defer_max to avoid many calls to
kick_defer_list_purge(), the same situation can be applied to
NAPI_SKB_CACHE_SIZE that was proposed in 2016. It's a trade-off between
using pre-allocated memory in skb_cache and saving more a bit heavy
function calls in the softirq context.
With this patch applied, we can have more skbs per-cpu to accelerate the
sending path that needs to acquire new skbs.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251118070646.61344-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
Disable CLKOUT on RTL8211F(D)(I)-VD-CG
The Realtek RTL8211F(D)(I)-VD-CG is similar to other RTL8211F models in
that the CLKOUT signal can be turned off - a feature requested to reduce
EMI, and implemented via "realtek,clkout-disable" as documented in
Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml.
It is also dissimilar to said PHY models because it has no PHYCR2
register, and disabling CLKOUT is done through some other register.
The strategy adopted in this 6-patch series is to make the PHY driver
not think in terms of "priv->has_phycr2" and "priv->phycr2", but of more
high-level features ("priv->disable_clk_out") while maintaining behaviour.
Then, the logic is extended for the new PHY.
Very loosely based on previous work from Clark Wang, who took a
different approach, to pretend that the RTL8211FVD_CLKOUT_REG is
actually this PHY's PHYCR2.
====================
Link: https://patch.msgid.link/20251117234033.345679-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
