- Add drm_line_printer (Michal)
Driver Changes:
- Fix an UAF (Matt Auld)
- Sanity check compression and coherency mode (Matt Auld)
- Some PIC-ID work (Jani)
- Use IS_ENABLED() instead of defined() on config options.
- gt powergating work (Riana)
- Suppress missing out ter rpm protection warning (Rodrigo)
- Fix a vm leak (Dafna)
- Clean up and update 'has_flat_ccs' handling (Lucas)
- Fix arg to pci_iomap (Lucas)
- Mark reserved engines in shapshot (Lucas)
- Don't keep stale pointer (Michal)
- Fix build warning with CONFIG_PM=n (Arnd)
- Add a xe_bo subtest for shrinking / swapping (Thomas)
- Add a warkaround (Tejas)
- Some display PM work (Maarten)
- Enable Xe2 + PES disaggregation (Ashutosh)
- Large xe_mmio rework / cleanup (Matt Roper)
- A couple of fixes / cleanups in the xe client code (Matt Auld)
- Fix page-fault handling on closed VMs (Matt Brost)
- Fix overflow in OA batch buffer (José)
- Style fixes (Lucas, Jiapeng, Nitin)
- Fixes and new development around SRIOV (Michal)
- Use devm_add_action_or_reset() in gt code (He)
- Fix CCS offset calculation (Matt Auld)
- Remove i915_drv.h include (Rodrigo)
- Restore PCI state on resume (Rodrigo)
- Fix DSB buffer coherency / Revert DSB disabling (Maarten / Animesh)
- Convert USM lock to rwsem (Matt Brost)
- Defer gt-mmio intialization (Matt Roper)
- meemirq changes (Ilia)
- Move some PVC related code out of xe-for-CI and to the driver (Rodrigo / Jani)
- Use a helper for ASID->VM lookup (Matt Brost)
- Add new PCI id for ARL (Dnyaneshwar)
- Use Xe2_LPM steering tables for Xe2_HPM (Gustavo)
- Performance tuning work for media GT and L3 cache flushing (Gustavo)
- Clean up VM- and exec queue file lock usage (Matt Brost)
- GuC locking fix (Matt Auld)
- Fix UAF around queue destruction (Matt Auld)
- Move IRQ-related registers to dedicated header (Matt Roper)
- Resume TDR after GT reset (Matt Brost)
- Move xa_alloc to prevent UAF (Matt Auld)
- Fix OA stream close (José)
- Remove unused i915_gpu_error.h (Jani)
- Prevent null pointer access in xe_migrate_copy (Zhanjun)
- Fix memory leak when aborting binds (Matt Brost)
- Prevent UAF in send_recv() (Matt Auld)
- Fix xa_store() error checking (Matt Auld)
- drop irq disabling around xa_erase in guc code (Matt Auld)
- Use fault injection infrastructure to find issues as probe time (Francois)
- Fix a workaround implementation. (Vinay)
- Mark wedged_mode debugfs writable (Matt Roper)
- Fix for prviewous memirq work (Michal)
- More SRIOV work (Michal)
- Devcoredump work (John)
- GuC logging + devcoredump support (John)
- Don't report L3 bank availability on PTL (Shekhar)
- Replicate Xe2 PAT settings on Xe2 (Matt Roper)
- Define Xe3 feature flags (Haridhar)
- Reuse Xe2 MOCS table on on PTL (Haridhar)
- Add PTL platform definition (Haridhar)
- Add MCR steering for Xe3 (Matt)
- More work around GuC capture for devcoredump (Zhanjun)
- Improve cache flushing behaviour on bmg (Matt Auld)
- Fix shrinker test compiler warnings on 32-bit (Thomas)
- Initial set of workarounds for Xe3 (Gustavo)
- Extend workaround for xe2lpg (Aradhya)
- Fix unbalanced rpm put x 2 (Matt Auld)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZwekBwAKCRC4FpNVCsYG
v32oAQDnIKVwjZecI1V3oUsy2ZE3TKWx8HH4FweT6S5L6tqZwQD/b0vkeA3UaojO
5FIkPEqyHFbrj+Sw7bLonLb3LHv4WAE=
=FtY6
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-10-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Cross-subsystem Changes:
- Add drm_line_printer (Michal)
Driver Changes:
- Fix an UAF (Matt Auld)
- Sanity check compression and coherency mode (Matt Auld)
- Some PIC-ID work (Jani)
- Use IS_ENABLED() instead of defined() on config options.
- gt powergating work (Riana)
- Suppress missing out ter rpm protection warning (Rodrigo)
- Fix a vm leak (Dafna)
- Clean up and update 'has_flat_ccs' handling (Lucas)
- Fix arg to pci_iomap (Lucas)
- Mark reserved engines in shapshot (Lucas)
- Don't keep stale pointer (Michal)
- Fix build warning with CONFIG_PM=n (Arnd)
- Add a xe_bo subtest for shrinking / swapping (Thomas)
- Add a warkaround (Tejas)
- Some display PM work (Maarten)
- Enable Xe2 + PES disaggregation (Ashutosh)
- Large xe_mmio rework / cleanup (Matt Roper)
- A couple of fixes / cleanups in the xe client code (Matt Auld)
- Fix page-fault handling on closed VMs (Matt Brost)
- Fix overflow in OA batch buffer (José)
- Style fixes (Lucas, Jiapeng, Nitin)
- Fixes and new development around SRIOV (Michal)
- Use devm_add_action_or_reset() in gt code (He)
- Fix CCS offset calculation (Matt Auld)
- Remove i915_drv.h include (Rodrigo)
- Restore PCI state on resume (Rodrigo)
- Fix DSB buffer coherency / Revert DSB disabling (Maarten / Animesh)
- Convert USM lock to rwsem (Matt Brost)
- Defer gt-mmio intialization (Matt Roper)
- meemirq changes (Ilia)
- Move some PVC related code out of xe-for-CI and to the driver (Rodrigo / Jani)
- Use a helper for ASID->VM lookup (Matt Brost)
- Add new PCI id for ARL (Dnyaneshwar)
- Use Xe2_LPM steering tables for Xe2_HPM (Gustavo)
- Performance tuning work for media GT and L3 cache flushing (Gustavo)
- Clean up VM- and exec queue file lock usage (Matt Brost)
- GuC locking fix (Matt Auld)
- Fix UAF around queue destruction (Matt Auld)
- Move IRQ-related registers to dedicated header (Matt Roper)
- Resume TDR after GT reset (Matt Brost)
- Move xa_alloc to prevent UAF (Matt Auld)
- Fix OA stream close (José)
- Remove unused i915_gpu_error.h (Jani)
- Prevent null pointer access in xe_migrate_copy (Zhanjun)
- Fix memory leak when aborting binds (Matt Brost)
- Prevent UAF in send_recv() (Matt Auld)
- Fix xa_store() error checking (Matt Auld)
- drop irq disabling around xa_erase in guc code (Matt Auld)
- Use fault injection infrastructure to find issues as probe time (Francois)
- Fix a workaround implementation. (Vinay)
- Mark wedged_mode debugfs writable (Matt Roper)
- Fix for prviewous memirq work (Michal)
- More SRIOV work (Michal)
- Devcoredump work (John)
- GuC logging + devcoredump support (John)
- Don't report L3 bank availability on PTL (Shekhar)
- Replicate Xe2 PAT settings on Xe2 (Matt Roper)
- Define Xe3 feature flags (Haridhar)
- Reuse Xe2 MOCS table on on PTL (Haridhar)
- Add PTL platform definition (Haridhar)
- Add MCR steering for Xe3 (Matt)
- More work around GuC capture for devcoredump (Zhanjun)
- Improve cache flushing behaviour on bmg (Matt Auld)
- Fix shrinker test compiler warnings on 32-bit (Thomas)
- Initial set of workarounds for Xe3 (Gustavo)
- Extend workaround for xe2lpg (Aradhya)
- Fix unbalanced rpm put x 2 (Matt Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZwekBwAKCRC4FpNVCsYG
# v32oAQDnIKVwjZecI1V3oUsy2ZE3TKWx8HH4FweT6S5L6tqZwQD/b0vkeA3UaojO
# 5FIkPEqyHFbrj+Sw7bLonLb3LHv4WAE=
# =FtY6
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 10 Oct 2024 19:53:11 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_gt_mcr.c
# drivers/gpu/drm/xe/xe_tuning.c
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zwekwrak12c5SSgo@fedora
drm-misc-next for v6.13:
UAPI Changes:
- Add drm fdinfo support to panthor, and add sysfs knob to toggle.
Cross-subsystem Changes:
- Convert fbdev drivers to use backlight power constants.
- Some small dma-fence fixes.
- Some kernel-doc fixes.
Core Changes:
- Small drm client fixes.
- Document requirements that you need to file a bug before marking a test as flaky.
- Remove swapped and pinned bo's from TTM lru list.
Driver Changes:
- Assorted small fixes to panel/elida-kd35t133, nouveau, vc4, imx.
- Fix some bridges to drop cached edids on power off.
- Add Jenson BL-JT60050-01A, Samsung s6e3ha8 & AMS639RQ08 panels.
- Make 180° rotation work on ilitek-ili9881c, even for already-rotated
panels.
-
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/panthor/panthor_drv.c
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8dc111ca-d20c-4e0d-856e-c12d208cbf2a@linux.intel.com
Technically the or_reset() means we call the action on failure, however
that would lead to unbalanced rpm put(). Move the get() earlier to fix
this. It should be extremely unlikely to ever trigger this in practice.
Fixes: 452bca0edb ("drm/xe: Don't suspend device upon wedge")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-4-matthew.auld@intel.com
Currently we can call fence_fini() twice if something goes wrong when
sending the GuC CT for the tlb request, since we signal the fence and
return an error, leading to the caller also calling fini() on the error
path in the case of stack version of the flow, which leads to an extra
rpm put() which might later cause device to enter suspend when it
shouldn't. It looks like we can just drop the fini() call since the
fence signaller side will already call this for us.
There are known mysterious splats with device going to sleep even with
an rpm ref, and this could be one candidate.
v2 (Matt B):
- Prefer warning if we detect double fini()
Fixes: 0a382f9bc5 ("drm/xe: Hold a PM ref when GT TLB invalidations are inflight")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-3-matthew.auld@intel.com
Add workaround (wa) 15016589081 which applies to Xe2_v3_LPG_MD.
Xe2_v3_LPG_MD is a Lunar Lake platform with GFX version: 20.04.
This wa is type: permanent, and hence is applicable on all steppings.
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009065542.283151-1-aradhya.bhatia@intel.com
Bspec asks us to disable some compression trick on JSL. While the
bspec description is pretty vague it looks like this is some extra
trick for 10bpc+ CCS which presumably the ICL derived display engine
doesn't support.
Note that we aren't currently exposing 10bpc CCS scanout support,
but once that gets added this presumably becomes an issue.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918144445.5716-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Added colon in kernel-doc comment to fix the warning.
./include/drm/drm_drv.h:372: warning: Incorrect use of kernel-doc format: * @fbdev_probe
./include/drm/drm_drv.h:435: warning: Function parameter or struct member 'fbdev_probe' not described in 'drm_driver'
Signed-off-by: R Sundar <prosunofficial@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003023806.17537-1-prosunofficial@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The ttm_bo_pin() and ttm_bo_unpin() functions weren't moving their
resources off the LRU list to the unevictable list.
Make sure that happens so that pinned objects don't accidently linger
on the LRU lists, and also make sure to move them back once they
are unpinned.
v2:
- Removing from a bulk move must be done with the pin-count still zero.
v3:
- ttm_resource_move_to_lru_tail must be done after pinning with a non-
NULL resource (Intel CI).
v6:
- Use a TAB instead of space (checkpatch.pl error).
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911121859.85387-3-thomas.hellstrom@linux.intel.com
Resources of swapped objects remains on the TTM_PL_SYSTEM manager's
LRU list, which is bad for the LRU walk efficiency.
Rename the device-wide "pinned" list to "unevictable" and move
also resources of swapped-out objects to that list.
An alternative would be to create an "UNEVICTABLE" priority to
be able to keep the pinned- and swapped objects on their
respective manager's LRU without affecting the LRU walk efficiency.
v2:
- Remove a bogus WARN_ON (Christian König)
- Update ttm_resource_[add|del] bulk move (Christian König)
- Fix TTM KUNIT tests (Intel CI)
v3:
- Check for non-NULL bo->resource in ttm_bo_populate().
v4:
- Don't move to LRU tail during swapout until the resource
is properly swapped or there was a swapout failure.
(Intel Ci)
- Add a newline after checkpatch check.
v5:
- Introduce ttm_resource_is_swapped() to avoid a corner-case where
a newly created resource was considered swapped. (Intel CI)
v6:
- Move an assert.
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911121859.85387-2-thomas.hellstrom@linux.intel.com
Commit 92c17d1647 ("drm/vc4: hvs: Ignore atomic_flush if we're disabled")
added a path which returned early without having called drm_dev_exit.
Ensure all paths call drm_dev_exit.
Fixes: 92c17d1647 ("drm/vc4: hvs: Ignore atomic_flush if we're disabled")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008-drm-vc4-fixes-v1-2-9d0396ca9f42@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Commit 45903624e9 ("drm/vc4: Run DRM default client setup")
only added DRM_FBDEV_DMA_DRIVER_OPS for the vc4 (Pi0-3) driver
definition, which caused an issue on vc5 (Pi4) as there was no
fbdev_probe function defined.
Fixes: 45903624e9 ("drm/vc4: Run DRM default client setup")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002-vc4_fbdev_fix-v1-1-8737bd11b147@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The BSpec says that EN_L3_RW_CCS_CACHE_FLUSH must be toggled
on for manual global invalidation to take effect and actually flush
device cache, however this also turns on flushing for things like
pipecontrol, which occurs between submissions for compute/render. This
sounds like massive overkill for our needs, where we already have the
manual flushing on the display side with the global invalidation. Some
observations on BMG:
1. Disabling l2 caching for host writes and stubbing out the driver
global invalidation but keeping EN_L3_RW_CCS_CACHE_FLUSH enabled, has
no impact on wb-transient-vs-display IGT, which makes sense since the
pipecontrol is now flushing the device cache after the render copy.
Without EN_L3_RW_CCS_CACHE_FLUSH the test then fails, which is also
expected since device cache is now dirty and display engine can't see
the writes.
2. Disabling EN_L3_RW_CCS_CACHE_FLUSH, but keeping the driver global
invalidation also has no impact on wb-transient-vs-display. This
suggests that the global invalidation still works as expected and is
flushing the device cache without EN_L3_RW_CCS_CACHE_FLUSH turned on.
With that drop EN_L3_RW_CCS_CACHE_FLUSH. This helps some workloads since
we no longer flush the device cache between submissions as part of
pipecontrol.
Edit: We now also have clarification from HW side that BSpec was indeed
wrong here.
v2:
- Rebase and update commit message.
BSpec: 71718
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Vitasta Wattal <vitasta.wattal@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007074541.33937-2-matthew.auld@intel.com
drm-misc-next for v6.12:
UAPI Changes:
- Add panthor/DEV_QUERY_TIMESTAMP_INFO query.
Cross-subsystem Changes:
- Updated dt bindings.
- Add documentation explaining default errnos for fences.
- Mark dma-buf heaps creation functions as __init.
Core Changes:
- Split DSC helpers from DP helpers.
- Clang build fixes for drm/mm test.
- Remove simple pipeline support for gem-vram,
no longer any users left after converting bochs.
- Add erno to drm_sched_start to distinguish between GPU and queue
reset.
- Add drm_framebuffer testcases.
- Fix uninitialized spinlock acquisition with CONFIG_DRM_PANIC=n.
- Use read_trylock instead of read_lock in dma_fence_begin_signalling to
quiesce lockdep.
Driver Changes:
- Assorted small fixes and updates for tegra, host1x, imagination,
nouveau, panfrost, panthor, panel/ili9341, mali, exynos,
panel/samsung-s6e3fa7, ast, bridge/ti-sn65dsi86, panel/himax-hx83112a,
bridge/tc358767, bridge/imx8mp-hdmi-tx, panel/khadas-ts050,
panel/nt36523, panel/sony-acx565akm, kmb, accel/qaic, omap, v3d.
- Add bridge/TI TDP158.
- Assorted documentation updates.
- Convert bochs from simple drm to gem shmem, and check modes
against available memory.
- Many VC4 fixes, most related to scaling and YUV support.
- Convert some drivers to use SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS.
- Rockchip 4k@60 support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/445713a6-2427-4c53-8ec2-3a894ec62405@linux.intel.com
Save manual engine capture into capture list.
This removes duplicate register definitions across manual-capture vs
guc-err-capture.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-7-zhanjun.dong@intel.com
When we decide to kill a job, (from guc_exec_queue_timedout_job), we could
end up with 4 possible scenarios at this starting point of this decision:
1. the guc-captured register-dump is already there.
2. the driver is wedged.mode > 1, so GuC-engine-reset / GuC-err-capture
will not happen.
3. the user has started the driver in execlist-submission mode.
4. the guc-captured register-dump is not ready yet so we force GuC to kill
that context now, but:
A. we don't know yet if GuC will be successful on the engine-reset
and get the guc-err-capture, else kmd will do a manual reset later
OR B. guc will be successful and we will get a guc-err-capture
shortly.
So to accomdate the scenarios of 2 and 4A, we will need to do a manual KMD
capture first(which is not be reliable in guc-submission mode) and decide
later if we need to use that for the cases of 2 or 4A. So this flow is
part of the implementation for this patch.
Provide xe_guc_capture_get_reg_desc_list to get the register dscriptor
list.
Add manual capture by read from hw engine if GuC capture is not ready.
If it becomes ready at later time, GuC sourced data will be used.
Although there may only be a small delay between (1) the check for whether
guc-err-capture is available at the start of guc_exec_queue_timedout_job
and (2) the decision on using a valid guc-err-capture or manual-capture,
lets not take any chances and lock the matching node down so it doesn't
get re-claimed if GuC-Err-Capture subsystem is running out of pre-cached
nodes.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-6-zhanjun.dong@intel.com
Upon the G2H Notify-Err-Capture event, parse through the
GuC Log Buffer (error-capture-subregion) and generate one or
more capture-nodes. A single node represents a single "engine-
instance-capture-dump" and contains at least 3 register lists:
global, engine-class and engine-instance. An internal link
list is maintained to store one or more nodes.
Because the link-list node generation happen before the call
to devcoredump, duplicate global and engine-class register
lists for each engine-instance register dump if we find
dependent-engine resets in a engine-capture-group.
To avoid dynamically allocate the output nodes during gt reset,
pre-allocate a fixed number of empty nodes up front (at the
time of ADS registration) that we can consume from or return to
an internal cached list of nodes.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-5-zhanjun.dong@intel.com
Capture-nodes generated by GuC are placed in the GuC capture ring
buffer which is a sub-region of the larger Guc-Log-buffer.
Add capture output size check before allocating the shared buffer.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-4-zhanjun.dong@intel.com
Add the ability for runtime allocation and freeing of
steered register list extentions that depend on the
detected HW config fuses.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-3-zhanjun.dong@intel.com
Add referenced registers defines and list of registers.
Update GuC ADS size allocation to include space for
the lists of error state capture register descriptors.
Then, populate GuC ADS with the lists of registers we want
GuC to report back to host on engine reset events. This list
should include global, engine-class and engine-instance
registers for every engine-class type on the current hardware.
Ensure we allocate a persistent storage for the register lists
that are populated into ADS so that we don't need to allocate
memory during GT resets when GuC is reloaded and ADS population
happens again.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-2-zhanjun.dong@intel.com
MCR steering on Xe3 media IP is almost the same as it was on Xe2, except
for one new range (0x38D0D0 - 0x38D0FF) which has changed to an MCR
"MEDIAINF" range on Xe3. Since we can always steer to grpid /
instanceid 0 for MEDIAINF ranges, define a new "INSTANCE0" steering
table for Xe3 media. Xe3 can continue to use the same OADDRM/GPMXMT
table as Xe2.
v2: Merge continuous entries 38D0D0 - 38F0FF
Bspec: 74298
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008013509.61233-7-matthew.s.atwood@intel.com
PTL is an integrated GPU based on the Xe3 architecture.
v2: explicitly turn off display until display patches land.
Bspec: 72574
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008013509.61233-6-matthew.s.atwood@intel.com
PTL is Xe3 architecture but there is no difference between LNL and PTL
in MOCS table. So, PTL uses the same MOCS table as LNL.
Bspec: 71582
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008013509.61233-5-matthew.s.atwood@intel.com
Define a common set of Xe3 feature flags and definitions that will be
used for all platforms in this family.
The feature flags are inherited unchanged from the Xe2 (XE2_FEATURES)
platform.
Following B-spec details inherited from Xe2 feature flag definition
commit.
v2: reuse graphics_xe2 definition
Bspec: 58695
- dma_mask_size remains 46 (not documented in bspec)
- supports_usm=1 (Bspec 59651)
- has_flatccs=1 (Bspec 58797)
- has_4tile=1 (Bspec 58788)
- has_asid=1 (Bspec 59654, 59265, 60288)
- has_range_tlb_invalidate=1 (Bspec 71126)
- five-level page table (Bspec 59505)
- 1 VD + 1 VE + 1 SFC (Bspec 67103, 70819)
- platform engine mask (Bspec 60149)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008013509.61233-3-matthew.s.atwood@intel.com
