commit f76f83a83c upstream.
Unfortunately even the HPD based detection added in
commit cfe5bdfb27 ("drm/i915: Check HPD live state during eDP probe")
fails to detect that the VBT's eDP/DDI-A is a ghost on
Asus B360M-A (CFL+CNP). On that board eDP/DDI-A has its HPD
asserted despite nothing being actually connected there :(
The straps/fuses also indicate that the eDP port is present.
So if one boots with a VGA monitor connected the eDP probe will
mistake the DP->VGA converter hooked to DDI-E for an eDP panel
on DDI-A.
As a last resort check what kind of DP device we've detected,
and if it looks like a DP->VGA converter then conclude that
the eDP port should be ignored.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9636
Fixes: cfe5bdfb27 ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114142333.15799-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit fcd479a791)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d6ef26501 upstream.
Many user-space compositors fail with mode setting if a CRTC has
more than one connected connector. This is the case with the BMC
on Aspeed systems. Work around this problem by setting the BMC's
connector status to disconnected when the physical connector has
a display attached. This way compositors will only see one connected
connector at a time; either the physical one or the BMC.
Suggested-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: e329cb53b4 ("drm/ast: Add BMC virtual connector")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116130217.22931-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a33b2431d1 upstream.
During USB transfers on the SC8280XP __arm_smmu_tlb_sync() is seen to
typically take 1-2ms to complete. As expected this results in poor
performance, something that has been mitigated by proposing running the
iommu in non-strict mode (boot with iommu.strict=0).
This turns out to be related to the SAFE logic, and programming the QOS
SAFE values in the DPU (per suggestion from Rob and Doug) reduces the
TLB sync time to below 10us, which means significant less time spent
with interrupts disabled and a significant boost in throughput.
Fixes: 4a352c2fc1 ("drm/msm/dpu: Introduce SC8280XP")
Cc: stable@vger.kernel.org
Suggested-by: Doug Anderson <dianders@chromium.org>
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/565094/
Link: https://lore.kernel.org/r/20231030-sc8280xp-dpu-safe-lut-v1-1-6d485d7b428f@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cea7008190 ]
The refresh reported by modetest is 60.46Hz, and the actual measurement
is 60.01Hz, which is outside the expected tolerance. Adjust hporch and
pixel clock to fix it. After repair, modetest and actual measurement were
all 60.01Hz.
Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate
is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte
by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime
/DSI CLK. Assume that the DSI controller could not make the mode that we
requested(presumably it's PLL couldn't generate the exact pixel clock?).
If you use a different DSI controller, you may need to readjust these
parameters. Now this panel looks like it's only used by me on the MTK
platform, so let's change this set of parameters.
Fixes: 1bc2ef065f ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120020109.3216343-1-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0a05acd6 ]
Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328
and RK3399 result in wrong colors being displayed.
The issue can be observed using modetest:
modetest -s <connector_id>@<crtc_id>:1920x1080-60@RG24
modetest -s <connector_id>@<crtc_id>:1920x1080-60@BG24
Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP
full framework (IP version 3.x) compared to VOP little framework (2.x).
Fix colors by applying different rb swap for VOP full framework (3.x)
and VOP little framework (2.x) similar to vendor 4.4 kernel.
Fixes: 85a359f253 ("drm/rockchip: Add BGR formats to VOP")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026191500.2994225-1-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0561794b6b ]
The only task of intel_gt_release_all is to zero gt table. Calling
it on error path prevents intel_gt_driver_late_release_all (called from
i915_driver_late_release) to cleanup GTs, causing leakage.
After i915_driver_late_release GT array is not used anymore so
it does not need cleaning at all.
Sample leak report:
BUG i915_request (...): Objects remaining in i915_request on __kmem_cache_shutdown()
...
Object 0xffff888113420040 @offset=64
Allocated in __i915_request_create+0x75/0x610 [i915] age=18339 cpu=1 pid=1454
kmem_cache_alloc+0x25b/0x270
__i915_request_create+0x75/0x610 [i915]
i915_request_create+0x109/0x290 [i915]
__engines_record_defaults+0xca/0x440 [i915]
intel_gt_init+0x275/0x430 [i915]
i915_gem_init+0x135/0x2c0 [i915]
i915_driver_probe+0x8d1/0xdc0 [i915]
v2: removed whole intel_gt_release_all
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8489
Fixes: bec68cc9ea ("drm/i915: Prepare for multiple GTs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115-dont_clean_gt_on_error_path-v2-1-54250125470a@intel.com
(cherry picked from commit e899505533)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f9a91b6c0 ]
The Innolux G101ICE-L01 datasheet [1] page 17 table
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
indicates that maximum vertical blanking time is 40 lines.
Currently the driver uses 29 lines.
Fix it, and since this panel is a DE panel, adjust the timings
to make them less hostile to controllers which cannot do 1 px
HSA/VSA, distribute the delays evenly between all three parts.
[1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf
Fixes: 1e29b840af ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06fc41b09c ]
Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description,
ones which match both the datasheet and the panel display_timing flags .
Fixes: 1e29b840af ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6965809e52 ]
For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that
MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high.
Fixes: 56ad624b4c ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel")
Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3e0f94d15 ]
Use the same value as the downstream driver. This change is needed for CPHY
mode to work correctly.
Fixes: 8b034e6771 ("drm/msm/dsi: add support for DSI-PHY on SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/566987/
Link: https://lore.kernel.org/r/20231110000216.29979-1-jonathan@marek.ca
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5911d02cac upstream.
[WHY]
Flush command sent to DMCUB spends more time for execution on
a dGPU than on an APU. This causes cursor lag when using high
refresh rate mouses.
[HOW]
1. Change the DMCUB mailbox memory location from FB to inbox.
2. Only change windows memory to inbox.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 923bbfe6c8 upstream.
[WHY]
Some eDP panels' ext caps don't set initial values
and the value of dpcd_addr (0x317) is random.
It means that sometimes the eDP can be OLED, miniLED and etc,
and cause incorrect backlight control interface.
[HOW]
Add remove_sink_ext_caps to remove sink ext caps (HDR, OLED and etc)
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 435f5b3696 upstream.
[WHY]
When cursor moves across screen boarder, lag cursor observed,
since subvp settings need to sync up with vblank that causes
cursor updates being delayed.
[HOW]
Enable fast plane updates on DCN3.2 to fix it.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b71f4ade1b upstream.
When ddc_service_construct() is called, it explicitly checks both the
link type and whether there is something on the link which will
dictate whether the pin is marked as hw_supported.
If the pin isn't set or the link is not set (such as from
unloading/reloading amdgpu in an IGT test) then fail the
amdgpu_dm_i2c_xfer() call.
Cc: stable@vger.kernel.org
Fixes: 22676bc500 ("drm/amd/display: Fix dmub soft hang for PSR 1")
Link: https://github.com/fwupd/fwupd/issues/6327
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a58555359a upstream.
[WHY & HOW]
For the scenario when a dsc capable MST sink device is directly
connected, it needs to use max dsc compression as the link bw constraint.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Roman Li <roman.li@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ffa8602e3 upstream.
[WHY]
HW can return invalid values on register read, guard against these being
set and causing us to access memory out of range and page fault.
[HOW]
Guard at sync_inbox1 and guard at pushing commands.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 256503071c upstream.
mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update.
Fixes: 1802537820 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17daf01ab4 upstream.
Otherwise userspace can spam the logs by using incorrect input values.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12f76050d8 upstream.
We should not leak the pointer where we couldn't grab the reference
on to the caller because it can be that the error handling still
tries to put the reference then.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8473bfdcb5 upstream.
When clearing the root PD fails we need to properly release it again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 432e664e7c upstream.
The ATRM ACPI method is for fetching the dGPU vbios rom
image on laptops and all-in-one systems. It should not be
used for external add in cards. If the dGPU is thunderbolt
connected, don't try ATRM.
v2: pci_is_thunderbolt_attached only works for Intel. Use
pdev->external_facing instead.
v3: dev_is_removable() seems to be what we want
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3938eb956e upstream.
AMD dGPUs have integrated FW that runs as soon as the
device gets power and initializes the board (determines
the amount of memory, provides configuration details to
the driver, etc.). For direct PCIe attached cards this
happens as soon as power is applied and normally completes
well before the OS has even started loading. However, with
hotpluggable ports like USB4, the driver needs to wait for
this to complete before initializing the device.
This normally takes 60-100ms, but could take longer on
some older boards periodically due to memory training.
Retry for up to a second. In the non-hotplug case, there
should be no change in behavior and this should complete
on the first try.
v2: adjust test criteria
v3: adjust checks for the masks, only enable on removable devices
v4: skip bif_fb_en check
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36e7ff5c13 upstream.
Use a proper MEID to make sure the CP_HQD_* and CP_GFX_HQD_* registers
can be touched when initialize the compute and gfx mqd in mes_self_test.
Otherwise, we expect no response from CP and an GRBM eventual timeout.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b1c6263ea upstream.
It's only valid on Intel systems with the Intel VSEC.
Use dev_is_removable() instead. This should do the right
thing regardless of the platform.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23170863ea upstream.
This was fixed in PMFW before launch and is no longer
required.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f3e6b840f upstream.
MACO only works if BACO is supported
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d7a328d0e upstream.
gen8_ggtt_invalidate() is only needed for limited set of platforms
where GGTT is mapped as WC. This was added as way to fix WC based GGTT in
commit 0f9b91c754 ("drm/i915: flush system agent TLBs on SNB") and
there are no reference in HW docs that forces us to use this on non-WC
backed GGTT.
This can also cause unwanted side-effects on XE_HP platforms where
GFX_FLSH_CNTL_GEN6 is not valid anymore.
v2: Add a func to detect wc ggtt detection (Ville)
v3: Improve commit log and add reference commit (Daniel)
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v6.2+
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018093815.1349-1-nirmoy.das@intel.com
(cherry picked from commit 81de3e296b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cb89cd42f upstream.
On GLK CDCLK frequency needs to be at least 2*96 MHz when accessing
the audio hardware. Currently we bump the CDCLK frequency up
temporarily (if not high enough already) whenever audio hardware
is being accessed, and drop it back down afterwards.
With a single active pipe this works just fine as we can switch
between all the valid CDCLK frequencies by changing the cd2x
divider, which doesn't require a full modeset. However with
multiple active pipes the cd2x divider trick no longer works,
and thus we end up blinking all displays off and back on.
To avoid this let's just bump the CDCLK frequency to >=2*96MHz
whenever multiple pipes are active. The downside is slightly
higher power consumption, but that seems like an acceptable
tradeoff. With a single active pipe we can stick to the current
more optiomal (from power comsumption POV) behaviour.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9599
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031160800.18371-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 451eaa1a61)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce4941c2d6 upstream.
eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.
Cc: <stable@vger.kernel.org>
BSpec: 70073 74224
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit a3431650f3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e186400685 upstream.
[what and why]
Check whether dpp resource pointer is null in advance and return early
if so.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81995ee162 upstream.
The drm stack does not expect error valued pointers for EDID anywhere.
Fixes: e668565087 ("drm: bridge: it66121: Set DDC preamble only once before reading EDID")
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Phong LE <ple@baylibre.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914131159.2472513-1-jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08e9ebc75b upstream.
The incoming strings might not be terminated by a newline
or a 0.
(found while testing a program that just wrote the string
itself, causing a crash)
Cc: stable@vger.kernel.org
Fixes: e3933f26b6 ("drm/amd/pp: Add edit/commit/show OD clock/voltage support in sysfs")
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 471aa951bf upstream.
When i915 perf interface is not available dereferencing it will lead to
NULL dereferences.
As returning -ENOTSUPP is pretty clear return when perf interface is not
available.
Fixes: 2fec539112 ("i915/perf: Replace DRM_DEBUG with driver specific drm_dbg call")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027172822.2753059-1-harshit.m.mogalapalli@oracle.com
[tursulin: added stable tag]
(cherry picked from commit 36f27350ff)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9506fba463 ]
Fix below compiler warning:
intel_tc.c:1879:11: error: ‘%d’ directive output may be truncated
writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
"%c/TC#%d", port_name(port), tc_port + 1);
^~
intel_tc.c:1878:2: note: ‘snprintf’ output between 7 and 17 bytes
into a destination of size 8
snprintf(tc->port_name, sizeof(tc->port_name),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%c/TC#%d", port_name(port), tc_port + 1);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
v2: use kasprintf(Imre)
v3: use const for port_name, and fix tc mem leak(Imre)
Fixes: 3eafcddf76 ("drm/i915/tc: Move TC port fields to a new intel_tc_port struct")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026125636.5080-1-nirmoy.das@intel.com
(cherry picked from commit 70a3cbbe62)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 390001d648 ]
The newly added memset() causes a warning for some reason I could not
figure out:
In file included from arch/x86/include/asm/string.h:3,
from drivers/gpu/drm/i915/gt/intel_rc6.c:6:
In function 'rc6_res_reg_init',
inlined from 'intel_rc6_init' at drivers/gpu/drm/i915/gt/intel_rc6.c:610:2:
arch/x86/include/asm/string_32.h:195:29: error: '__builtin_memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
195 | #define memset(s, c, count) __builtin_memset(s, c, count)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_rc6.c:584:9: note: in expansion of macro 'memset'
584 | memset(rc6->res_reg, INVALID_MMIO_REG.reg, sizeof(rc6->res_reg));
| ^~~~~~
In function 'intel_rc6_init':
Change it to an normal initializer and an added memcpy() that does not have
this problem.
Fixes: 4bb9ca7ee0 ("drm/i915/mtl: C6 residency and C state type for MTL SAMedia")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016201012.1022812-1-arnd@kernel.org
(cherry picked from commit 0520b30b21)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e8b9f258b ]
The allocated memory for qdev->dumb_heads should be released
in qxl_destroy_monitors_object before qxl suspend.
otherwise,qxl_create_monitors_object will be called to
reallocate memory for qdev->dumb_heads after qxl resume,
it will cause memory leak.
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
Link: https://lore.kernel.org/r/20230801025309.4049813-1-zhouzongmin@kylinos.cn
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1904ed480 ]
[Why & How]
Check whether assigned timing generator is NULL or not before
accessing its funcs to prevent NULL dereference.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 406e884535 ]
In SR-IOV environment, the value of pcie_table->num_of_link_levels will
be 0, and num_of_levels - 1 will cause array index out of bounds
Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79f3f1b667 ]
[Why]
Helper function calculates num_ways using 32-bit. But is
returned as 8-bit. If num_ways exceeds 8-bit, then it
reports back the incorrect num_ways and erroneously
uses MALL when it should not
[How]
Make returned value 32-bit and convert after it checks
against caps.cache_num_ways, which is under 8-bit
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbf1035b03 ]
Rather than individual ASICs checking for the quirk, set the quirk at the
driver level.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d12d635bb0 ]
Switching to a different reset sequence, enabling IOVCC before enabling
VCC.
There also needs to be a delay after enabling the supplies and before
deasserting the reset. The datasheet specifies 1ms after the supplies
reach the required voltage. Use 10-20ms to also give the power supplies
some time to reach the required voltage, too.
This fixes intermittent panel initialization failures and screen
corruption during resume from sleep on panel xingbangda,xbd599 (e.g.
used in PinePhone).
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Reported-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230211171748.36692-2-frank@oltmanns.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd90511557 ]
In amdgpu_vkms_conn_get_modes(), the return value of drm_cvt_mode()
is assigned to mode, which will lead to a NULL pointer dereference
on failure of drm_cvt_mode(). Add a check to avoid null pointer
dereference.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c1fe3c480 ]
In radeon_tv_get_modes(), the return value of drm_cvt_mode()
is assigned to mode, which will lead to a NULL pointer
dereference on failure of drm_cvt_mode(). Add a check to
avoid null point dereference.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
